BAPI/FM to update the condition value in Rebate agreement(VBO2)

Hi All,
Please help me in solving the below requirement.
The requirement,
1) In VBO2 ---> Enter agreement
2) Go to conditions in the application tool bar
3) A pop up 'Valid condition types and Key combinations' will appear. Select a particular key combination and continue.
4)In the next screen we need to change the Amount and save the agreement.
We tried to solve this through BDC, but we are not able to handle the POP UP through BDC.
Please let me know the suitable BAPI / Function module.
Thanks in Advance...
Regards
Balaji

Try these BAPI's
BAPI_LISTING_CONDITIONS,
BAPI_AGREEMENTS
Regards,
Rajasekhar Reddy.

Similar Messages

FM'S or BAPI to update the condition records in VB22 transaction

Hi,
I need your help in getting the FM'S or BAPI to update the condition records in sales deal.
The transaction is VB22.
If you can send me a smaple code it will be really helpful.
Regards,
Sasi

Check this:
http://www.sapnet.ru/viewtopic.php?p=1644
Bapi for VK11 & VK12
Reddy

Fm to change the condition value in sales order pricing

Hi Friends,
I need a FM to change the Pricing value that is auto calculated in the sales order. It needs to be overwritten. BAPI_SALESORDER_CHANGE I don't think will do it. It can be used only to update the condition type and the condition amount but not the condition value.
Can someone please help me. I've been stuck with this for quite sometime.
Thanks,
Dikshitha G

Try these BAPI's
BAPI_LISTING_CONDITIONS,
BAPI_AGREEMENTS
Regards,
Rajasekhar Reddy.

Problem changing the Condition Value in Po using BAPI_PO_CHANGE

Hi Experts,
My issue is BAPI_PO_CHANGE is not changing the Condition value. and giving message in bapi return as 'cannot be processed manually'.
Can anybody please help me on this.
Thanks & Regards,
Sudheer

Check this link http://forums.sdn.sap.com/thread.jspa?threadID=652278
Regards,

Updating the characterstic values

Hi,
We are trying to update the characterstic values in the material master through AUSP table (BDC program). We want to replace the old values with the new values. But the program is appending the new characterstic values to the old values. This is happening inspite of the configuration setting in the characterstic transaction (CT04) such that it allows only a single value. Please suggest us in this regard.
Thanks
Ramakanth

Hi,
We are not using BAPI.
We are using recording the transaction in MM02.
Regards
Ramakanth

How to update the table value in the valuechange event?

I have an input field in the datatable with the valueChangeListener
<rich:dataTable id="cart" value="#{cart.cartList}" var="item">
<h:inputText value="#{item.cost}" id="qty" valueChangeListener="#{items.updateCost}" onchange="submit()">
<h:outputText value="#{item.errorMsg}"> </h:outputText>
in the backing bean
     Item item = (Item) model.getRowData();
// do some update, if the cost too larger, change to max_cost
     item.setCost(max_cost);
     item.setErrorMsg("Error Msg");
After calling the valuechange method, the screen output doesn't update the cost.
How to update the table value in the valuechange event?

As you're misusing the valueChangeListener to set another input field, you need to skip the update model values phase. Otherwise the value set in the valueChangeListener will be overridden by the submitted value. You can do this by calling the FacesContext#renderResponse() inside the valueChangeListener method. This will shift the current phase immediately to the render response phase, hereby skipping the update model values and invoke application phases.

How to update the condition price in the sales order for all the items

Hi,
How to update the condition price for all the itmes in the sales order to carry out the new price automatically through a stand alone program, for all the orders in the billing due list table?
Thanks,
Balaram

Hi,
There is a change in the requirement.
Scenario:
I have created a sales order with some 4 condition types, in that 2 condition types are of class A & B and the other two is of class C. Here I need to update the condition price of class A & B only and the remaining condition types should not get update even though there is an updated price is available.
For the above scenario, I need to write a standalone program. Do we have any function modules to update the price of the single condition in the sales order? Please tell me how we can update the sales order at item condition level.
Thanks.
Balaram

How to update the condition price in sales order while creating the invoice

Hi,
How to update the condition price in the sales order to carry out the new price while creating the invoice?
While creating the invoice it should update the condition price in sales order.
Thanks,
Balaram

No, pricing is not there in delivery.
I found an exit for VF01transaction where we can update the price in order.
Can you please tell me how to update the price if I have the order, material numbers and conditions number?
Thanks,
Balaram

How to query the condition value in VPRS

Hello all,
we provide the sales price to customers based on the condition value in "VPRS" ,because I have thousands of goods need the price,so I 'd like to make a query to extract the condition value in "VPRS".
which table is refer to this?
https://mnlylq.bay.livefilestore.com/y1mXNdIiY7VgiU1v3ymS71pxZluGxj4YNp4IFsyQEr1zkoxjm1VCsxpOgbBQ1-ucxiRtA9tC7O_3ZPaQa7qWKGbdnHNX8UzazWTlettENIO7iujggSx7vHjc2bvuIqhYFYb2DEgIjuNaJ5foKU_xF7wvA/%E5%9B%BE%E5%85%AD.jpg?psid
Thanks,
helai

hi,
For your Item category, if you check DETERMINE COST
Determine cost
Indicates whether, during pricing, the system determines the cost (stock value) of a sales document item.
Use
The system checks the cost determination indicator as a requirement before applying the condition type that calculates the cost (condition type VPRS in the standard version of R/3 1.1)
Mainatin VPRS as D then it will automatically pull the price from Material master if maintained
IF VPRS is getting determined, then in your pricing procedure, you can add markup (multiplier)

Error while updating the forecast value in M.Master through RMDATIND

Hi All
Good Day
In my custom Program I am using the three structures bgr00,bmm00,bmmh1 & bmmh3 and through rmdatind(Direct input method) program, i am trying to update the forecast value in material master data
and i am getting error message as Specify a tracking limit and i have taken the tracking limit as 4 in my program.
Actually there are 2 fields exists for tracking limit in structure bmmh1
1.SIGGR and
2.SIGG2
I had given the input as 4 for these 2 fields but I am getting the same error message Specify a tracking limit
Can anyone please help me in this case.
Thanks in advance.
Cheers
Vallabhaneni

debug your program.
Compare the field content of the value in the field you submitted with the content in field that is checked when message M3 456 is issued.

Batch Split in OBD & billed for the entire Quantity .RG1 register does not update the excise values

Hi All,
I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
Sales order (no batch determination) , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
Can somebody help me .
Thank you

My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
Which field (H & J) they were referring in VBFA ?
i have checked few other projects in my company and they all seems to be following the program
How about the other projects' values in VBFA where your techinical team is guessing some issue. Have you compared this?
Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
G. Lakshmipathi

The Condition value formula is not found in CRM ???

Hello Al
l
We are working on CRM 7.0 , I canu2019t find the Condition Value Formula, Condition Base Formula and Condition u201Crequirementsu201D in the pricing procedures downloaded from the ECC also in the pricing procedures that are standard in the CRM
I donu2019t know what is the reason for that
Regards
Jacopo Françoise

the IPC should work to make them available

Pricing procedure change the condition value

Hi,
My pricing procedure determines the Tax in %basis.Now i have a rewuirement wherein i should be able to enter the amount in AMOUNT COLOUMN in condition tab. This value should be the condition Value for the condition type.
Now my pricing procedure doesnt allow me to make any changes and the condition type is greyed out. how can i calulate the tax in amount instead of % and be able to enter the value manually?
Thanks,
Challa

Hi Challa,
Price can be maintained either on percentage basis or on amount basis.
So you have to make changes in condition type to convert it from percentage to amount.
Go to IMG u2013 sales and distribution u2013 master data u2013 basic function u2013 pricing u2013 pricing control u2013 define condition type.
Select maintain condition type from the options.
Now select your condition type and click on detail.
Change the calculation type from A (percentage) to B (Fixed amount) and save it.
Now go to VK11 and maintain the new condition record for that condition type.
Now create the sales order and go to condition tab and check out the pricing it will be amount.
Please do this method if you find any difficulty then tell us.
Regards
Raj.

Problem while updating the forecast value in m.master by direct input menth

Hi All
Good Day
I am updating the forecast value in material master by direct input method.
my program is working fine when I am running it online.
but when i am runnig in back ground I am getting one error which is mentioned below
                                                                                Job ZM_OPTIMIZA_UPLOAD: Data does not match the job definition; job terminated    BD    078     E
Please anyone can help ne in above case.
Thanks in advance.
Cheers
Vallabhaneni

Hi Hakim
How are you
Thanks for your valuable suggestion.
I am executing my program in background with bmv0 transaction with variant, in development I can run this job in background with out any logical errors but in QA I am getting errors.
Can you please help me in the above case.
In Bmv0 transaction first I defined the job and in program rmdatind (execute) screen first I mentioned the Max. no of logical errors as 500 and Transactions per commit unit as 500 and I run the program in background in bmv0 transaction and I am getting the message background job terminated immediately
Because of this again I changed the Max. no of logical errors 500 to 99999 and transaction per commit unit 500 to 999999 and then i scheduled my program in background.
Alomost it ran for 27 hours and then it has given the message background job terminated.
Job log entries are as follows.
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040840; material number SUJ82J8400; error gravity E
22.12.2008 11:19:46 Transaction 0000040840: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040841; material number SUJ84G3001; error gravity E
22.12.2008 11:19:46 Transaction 0000040841: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040842; material number SUJ84G3002; error gravity E
22.12.2008 11:19:46 Transaction 0000040842: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040843; material number SUJ86G0100; error gravity E
22.12.2008 11:19:46 Transaction 0000040843: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040844; material number SUJ86G0300; error gravity E
22.12.2008 11:19:46 Transaction 0000040844: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040845; material number SUJ86G0900; error gravity E
22.12.2008 11:19:46 Transaction 0000040845: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040846; material number SUJ86G9600; error gravity E
22.12.2008 11:19:46 Transaction 0000040846: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040847; material number SUJ86G9601; error gravity E
22.12.2008 11:19:46 Transaction 0000040847: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040848; material number SUJ86J0000; error gravity E
22.12.2008 11:19:46 Transaction 0000040848: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:20:54 Transaction 0000040848 completed Mat. no. No. of log. errors 0000040848
22.12.2008 11:21:30 ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED
22.12.2008 11:21:30 Job cancelled
I know it has taken long time to process the job because of I changed the transactions per commit unit (500 to 999999) it kills the system
But I am supposed to provide some number < 999999 in transactions per commit unit
actually I haven't tried like I said above < 999999 because i don't have any hopes.
Please look at this problem and help me in this case.
Thanks in advance.
Vallabhaneni

Changing the Condition value in Quatation only and not in Order

Hi Gurus,
We have a Requirement from Client in which the Client should be Able to change the condition Value PR00 in the Quotation and not in Sales order......can someone please let me know how's that possible?
Because if we try to make Changes in Condition Type in V/06 it will also allow changes in Sales Order....

Hi
You can use user-exit USEREXIT_PRICING_PREPARE_TKOMP in the include MV45AFZZ.
IF VBAK-AUART = (Your quotation type)
LOOP AT XKOMV.
IF XKOMV-KSCHL = 'PR00'.
SELECT * FROM T685A INTO TABLE I_T685A WHERE KSCHL = 'PR00'.
READ TABLE I_T685A WITH KEY KSCHL = XKOMV-KSCHL.
I_T685A-KMANU = 'C'.
MODIFY I_T685A INDEX SY-TABIX.
MODIFY T685A FROM TABLE I_T685A.
REFRESH I_T685A.
ENDIF.
ENDLOOP.
like this discuss with your abapper and build the logic
regards
Prashanth

BAPI/FM to update the condition value in Rebate agreement(VBO2)

Similar Messages

Maybe you are looking for