BAPI for WBS system statuts
hi,
We are looking for a BAPI in order to change system status of wbs.
We tried with BAPI_BUS2054_SET_STATUS but we probably did something wrong because we have errors:
Error in processing. Function was partially executed.
Resetting status CLOT for object J888880805PC not supported
Setting status LANC not supported for object J888880805PC
Any idea?
Best regards,
Julien
Hi,
the BAPIs for PS requires some additional function calls. In this case you need to call BAPI_PS_PRECOMMIT. It's described in documentation for your BAPI.
Cheers
Similar Messages
-
How to call infopackage bapis for other system?
Hi Experts,
I want to start infopackage of CRM from BW using BAPI. I do not see any place to mention the target system (here CRM) where infp package should be started?
Thanks in advance,
PurvangHi
You can create program and call this BAPI
BAPI_IPAK_START
using follwoing statment
CALL FUNCTION 'BAPI_IPAK_START' DESTINATION 'CRMCLNT400'
EXPORTING
INFOPACKAGE =
* JOBNAME =
* IMPORTING
* REQUESTID =
TABLES
RETURN = .
where 'CRMCLNT400' is the target system.
In case, if you are not required to use this frequent , then you can run this BAPI in se37-> Execute
then specify the target system in field RFC target sys:
Hope this helps...
Sonal....
Edited by: Sonal Patel on Dec 31, 2009 2:31 PM -
Function modules or BAPI for posting plan costs for WBS Element
Hi all,
Does anyone know, whether there exists a function module or BAPI for posting plan costs to a WBS Element? K_COSTS_PLAN_PS does not work, because RKP1 is not allowed.
Greetingscheck
BAPI_COSTACTPLN_POSTACTINPUT Activity Input Planning: Posting
BAPI_COSTACTPLN_POSTACTOUTPUT Activity/Price Planning: Posting
BAPI_COSTACTPLN_POSTKEYFIGURE Stat. Key Figure Planning: Postings
BAPI_COSTACTPLN_POSTPRIMCOST Primary Cost Planning: Postings
BAPI_PDTRANSCO_POSTPRIMCOST Transfer of Planning Data: Post Primary Costs
K40C CO Actual Postings, Manual
BAPI_ACC_PRIMARY_COSTS_POST Accounting: Post Primary Costs
BAPI_COPAACTUALS_POSTCOSTDATA BAPI Operating Concern: Post Costing-Based Actua
BAPI_PRIM_COST_CHECK_AND_POST Primary Costs: Formal Parameter Check
S@meer -
IDOC/BAPI for Production order creation from Legacy system
Hi all
We are using an interface to create Production orders from legacy to SAP. Would you recommend an IDOC or a BAPI to create Production orders. If IDOC or BAPI then could you please mention which one?
thanks a bunchHi John,
For your purposes, please use BAPI for production order creation from legacy system. There is no standard inbound IDoc available to use. SAP has an IDoc for outbound interface only (message type LOIPRO).
If there is an inbound IDoc available, I would recommend to use an IDoc.
IDoc technology has excellent error handling and will allow you to reprocess an error (if any).
BAPI is also good approach to use and fast in term of processing.
For BAPI approach, you can use BAPI BAPI_PRODORD_CREATE.
Hope this will help.
Regards,
Ferry Lianto -
BAPI for finding child WBS elements under a Parent WBS element
Hi friends,
I am working on the transaction ZIOS02 transaction. On releasing the Parent or Main WBS element in ZIOS02 transaction I need to copy some data from ZIOS to PRPS based on WBS element.
I have a Bapi for retrieving all the WBS elements based on Project Definition (BAPI_PROJECT_GETINFO) but i want to know whether is there any BAPI for finding the child WBS elements when we give a Parent WBS elemnts as Input to BAPI.
Could any one please help me in the query ASAP.Hi friends,
I have got the answer for finding the child WBS elements.
In Function module BAPI_Project_get_info.
Use parameter subtree = 'X' and give the WBS element name in tables section under I_wbs_element. You will get all the child WBS elements which are under Main WBS element.
Thanks
Satish Raju -
BAPI for settlement rules in WBS Elements
Hi,
Is there any standard bapi, method, or whatever... to create / modify settlement rules for WBS Elements?.
Rgds,
JoseLook at BAPI/FM of FG CJ2054
BAPI_BUS2054_CHANGE_MULTI Change WBS Elements by BAPI
BAPI_BUS2054_CREATE_MULTI Create WBS Elements by BAPI
BAPI_BUS2054_DELETE_MULTI Delete WBS Elements by BAPI
BAPI_BUS2054_GET_GUID_FROM_KEY Read the GUIDs Using the WBS Keys
BAPI_BUS2054_GET_KEY_FROM_GUID Read the WBS Keys Using the GUIDs
CJ2054_CHANGE
CJ2054_CREATE
CJ2054_DELETE
CJ2054_WBSELEMENT_CHANGE_STRU
MAP2I_BAPI_BUS2054_CHG_TO_PRPS
MAP2I_BAPI_BUS2054_NEW_TO_PRPS
MAP2I_BAPI_BUS2054_UPD_TO_PRPS
Regards -
Is there any BAPI for Upload Documents of WBS elements?
Hi Guys,
Can anbody tell me is there any BAPI for Uploading Documents of WBS elements ?
Thanks,
Gopi.hi
check these BAPI
Change WBS Elements Using BAPI
BAPI_BUS2054_CHANGE_MULTI
Create WBS Elements Using BAPI
BAPI_BUS2054_CREATE_MULTI
Delete WBS Elements Using BAPI
BAPI_BUS2054_DELETE_MULTI
Detail Data for WBS Elements
BAPI_BUS2054_GETDATA
Reading the GUIDs using the WBS Key
BAPI_BUS2054_GET_GUID_FROM_KEY
Reading the WBS Key using the GUIDs
BAPI_BUS2054_GET_KEY_FROM_GUID
Check Existence of a WBS Element
BAPI_PROJECT_EXISTENCECHECK
Element
thnks
sitaram -
Any bapi for update MCJ4 report(SAP performance reports)
Hi,
Any bapi for update MCJ4 report(SAP performance reports)
or
how to update MCJ4 report from my webdynpro application.
Regards,
Deepak SinghHi,
Have you gone through this ,We already have the discussion on this .
[http://forums.sdn.sap.com/thread.jspa?threadID=1162642]
BTW , As you say, you are going to create the Milsetsone what is your reference is it WBS element and project definition or network , How are you planning to bring the reference data from the legacy system [ As example the WBS element against which the Milestone s are craeted] into SAP . Becuase as far as i know milestones area attached with project definition and then further down to WBS element so you need to bring the Project definition + WBS element to change create the milsetone .
Thanks,
Anjaneya . -
Report to check the WBS "system status"
Hello friends,
Would anyone know for a standard report where I can check for the WBS "system status"?
i.e.: I want to know everything I have in AVAC status
Thanks and Regards
AlexYou can get the system status of WBS in CN41, Execute the report , after it use the change layout option, select status.
System will display you user / system status for all the PS Objects.
With Regards
Nitin P. -
How to Use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA
Hi ,
How to use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA.
May i know what are the input parameters & fields mandatory
for each Table structures ct_data , ct_datax , it_descript , it_longtext.
Can any one explain me Step by Step Process.
B'cos i tried with below code. Equipment is not getting created.
wa_itab-equipment_ext = '000000000100000001'.
wa_itab-descript = 'Test 2 -> Lube Oil Pump'.
wa_itab-text_language = 'EN'.
wa_itab-sdescript = 'Short Description'.
APPEND wa_itab TO it_itab.
CLEAR wa_itab.
LOOP AT it_itab INTO wa_itab.
ct_data-ta_guid = '000000000000000001'.
ct_data-equipment_ext = wa_itab-equipment_ext.
ct_data-descript = wa_itab-descript .
ct_data-valid_date = sy-datum.
ct_data-equicatgry = 'M'.
APPEND ct_data.
CLEAR ct_data.
ct_datax-ta_guid = '000000000000000001'.
ct_datax-equipment_ext = 'X'.
ct_datax-equipment = 'X'.
APPEND ct_datax.
CLEAR ct_datax.
it_descript-ta_guid = '000000000000000001'.
it_descript-text_language = wa_itab-text_language.
it_descript-descript = wa_itab-sdescript .
APPEND it_descript.
CLEAR it_descript.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'LTXT'.
it_longtext-text_line = 'SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS'.
APPEND it_longtext.
CLEAR it_longtext.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'INTV'.
it_longtext-text_line = 'aaaaaaaaaaaaaaa'.
APPEND it_longtext.
CLEAR it_longtext.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'INTV'.
it_longtext-text_line = 'bbbbbbbbbbbb'.
APPEND it_longtext.
CLEAR it_longtext.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'INTV'.
it_longtext-text_line = 'cccccccccccccccc'.
APPEND it_longtext.
CLEAR it_longtext.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
call BAPI-function in this system
CALL FUNCTION 'BAPI_EQUIPMENT_SAVEREPLICA'
TABLES
ct_data = ct_data
ct_datax = ct_datax
it_descript = it_descript
it_longtext = it_longtext
return = return
EXCEPTIONS
OTHERS = 1.
IF sy-subrc = 0.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
WRITE : 'Successful'.
ENDIF.
IF NOT return IS INITIAL.
LOOP AT return.
IF return-type = 'A' OR return-type = 'E'.
WRITE : 'Error'.
ENDIF.
ENDLOOP.
ENDIF.
REFRESH return.
ENDLOOP.
Regards
SUrendarHi ,
How to use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA.
May i know what are the input parameters & fields mandatory
for each Table structures ct_data , ct_datax , it_descript , it_longtext.
Can any one explain me Step by Step Process.
B'cos i tried with below code. Equipment is not getting created.
wa_itab-equipment_ext = '000000000100000001'.
wa_itab-descript = 'Test 2 -> Lube Oil Pump'.
wa_itab-text_language = 'EN'.
wa_itab-sdescript = 'Short Description'.
APPEND wa_itab TO it_itab.
CLEAR wa_itab.
LOOP AT it_itab INTO wa_itab.
ct_data-ta_guid = '000000000000000001'.
ct_data-equipment_ext = wa_itab-equipment_ext.
ct_data-descript = wa_itab-descript .
ct_data-valid_date = sy-datum.
ct_data-equicatgry = 'M'.
APPEND ct_data.
CLEAR ct_data.
ct_datax-ta_guid = '000000000000000001'.
ct_datax-equipment_ext = 'X'.
ct_datax-equipment = 'X'.
APPEND ct_datax.
CLEAR ct_datax.
it_descript-ta_guid = '000000000000000001'.
it_descript-text_language = wa_itab-text_language.
it_descript-descript = wa_itab-sdescript .
APPEND it_descript.
CLEAR it_descript.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'LTXT'.
it_longtext-text_line = 'SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS'.
APPEND it_longtext.
CLEAR it_longtext.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'INTV'.
it_longtext-text_line = 'aaaaaaaaaaaaaaa'.
APPEND it_longtext.
CLEAR it_longtext.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'INTV'.
it_longtext-text_line = 'bbbbbbbbbbbb'.
APPEND it_longtext.
CLEAR it_longtext.
it_longtext-ta_guid = '000000000000000001'.
it_longtext-text_language = wa_itab-text_language.
it_longtext-text_id = 'INTV'.
it_longtext-text_line = 'cccccccccccccccc'.
APPEND it_longtext.
CLEAR it_longtext.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
call BAPI-function in this system
CALL FUNCTION 'BAPI_EQUIPMENT_SAVEREPLICA'
TABLES
ct_data = ct_data
ct_datax = ct_datax
it_descript = it_descript
it_longtext = it_longtext
return = return
EXCEPTIONS
OTHERS = 1.
IF sy-subrc = 0.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
WRITE : 'Successful'.
ENDIF.
IF NOT return IS INITIAL.
LOOP AT return.
IF return-type = 'A' OR return-type = 'E'.
WRITE : 'Error'.
ENDIF.
ENDLOOP.
ENDIF.
REFRESH return.
ENDLOOP.
Regards
SUrendar -
BAPI for fetching the list of scheduling agreements
This is my first post in SDN Forums so pardon me if I commit a mistake.
My question is: Is there a standard BAPI for fetching a list of scheduling agreements?
I know that there are BAPIs for creating and maintaining scheduling agreements like BAPI_SAG_CREATE and BAPI_SAG_CHANGE and iBAPI_SAG_GETDETAIL but each of these require the scheduling agreement number. My requirement is to list out all the scheduling agreements that are present in the system.
I found a BAPI named BAPI_DOCUMENT_GETLIST and BAPI_DOCUMENT_GETLIST2 but I'm not able to find out what documents it is able to display. If I don't specify any selection criteria, it is fetching just two records of document type DRW. No other document of any other type is fetched.
Another BAPI that I found was BAPI_SALESORDER_GETLIST in which if I specify the Transaction group as "3" (for scheduling agreement), it fetches them but those are related to Sales orders and not purchase orders.
So, if anyone has any info and can help me out, I would really appreciate it.
Edited by: rkarthea on Jul 30, 2010 10:44 AMHi Raj,
As I had said earlier, I need the Scheduling agreements related to purchase orders and not sales orders. The ones in EKKO table (Doc category: L).Will this program fetch this info?
Also, I need a Java app (that's being developed) to fetch this info, so I'm looking for a BAPI. Is there any or can this program (if it fetches the right Scheduling agreements) be called from an external Java app? -
BAPI for Scheduling a background job
Hi all,
is there any bapi for scheduling a background job?
i mean can we do background job using bapi
If not how can we create a bapi for scheduling a background job.
Thanks & Regards,
AzharHi,
Use following BAPIs for scheduling a job in background
BAPI_XBP_JOB_OPEN - This BAPI solves the first step in scheduling a job in the R/3 background processing system. You can create the job with this method.
Using additional BAPI calls BAPI_XBP_JOB_ADD_ABAP_STEP and BAPI_XBP_JOB_ADD_EXT_STEP, you can add job steps to the job.
With the BAPI call BAPI_XBP_JOB_CLOSE, you can finish defining the job and transfer it to the background processing system with the status Scheduled without start date.
You have execute the job with the BAPI calls BAPI_XBP_JOB_START_IMMEDIATELY or BAPI_XBP_JOB_START_ASAP.
I hope it would help you.
Regards,
Venkatram -
BAPI FOR Deleting a Schedule Line Item from EKES and EKET tables
Dear All,
I would like to for deleting one of the line item from EKES (Po Confirmation ) and the respective line item from the EKET(PO Schedule Line Item Table).
Assume that am allowing the user to select the lineitem from zprogram screen and collecting the PO and Its LIne Item details in an internal table.
Can i Use
<b>BAPI_PO_Change</b> , if so , can anybody tell me the steps to follow to use this bapi for deleting the PO lineItems, since i m going to try BAPI for First time.
pls help me out
Message was edited by: Raja K.PHi raja ,
loop at iekko1.
w_index = sy-tabix.
item-po_item = itemx-po_item = iekko1-ebelp.
item-quantity = iekko1-mng01.
itemx-quantity = iekko1-mng01.
if iekko1-wamng = iekko1-wemng.
itemx-no_more_gr = item-no_more_gr = 'X'.
else.
itemx-no_more_gr = item-no_more_gr = ''.
endif.
append item.
append itemx.
clear return[].
call function 'BAPI_PO_CHANGE'
exporting
purchaseorder = iekko1-ebeln
tables
return = return
poitem = item
poitemx = itemx.
if return[] is initial.
commit work and wait.
call function 'DEQUEUE_ALL'.
search for deletion fields which u have to mark 'X'.
before calling this BAPi u have to lock the PO by using ENQUEUE.
<b>
FU BAPI_PO_CHANGE
Text
Change purchase order
Functionality
Function module BAPI_PO_CHANGE enables you to change purchase orders. The Change method uses the technology behind the online transaction ME22N.
Alternatively, the IDoc type PORDCH1 is available. The data from this IDoc populates the interface parameters of the function module BAPI_PO_CHANGE.
Functionality in Detail
Authorization
When you create (activity 02) an Enjoy purchase order, the following authorization objects are checked:
M_BEST_BSA (document type in PO)
M_BEST_EKG (purchasing group in PO)
M_BEST_EKO (purchasing organization in PO)
M_BEST_WRK (plant in PO)
Controlling adoption of field values via X bar
For most tables, you can use your own parameters in the associated X bar (e.g. PoItemX) to determine whether fields are to be set initial, values inserted via the interface, or default values adopted from Customizing or master records, etc. (for example, it is not mandatory to adopt the material group from an underlying requisition - you can change it with the BAPI).
Transfer
Purchase order number
The PurchaseOrder field uniquely identifies a purchase order. This field must be populated in order to carry out the Change method.
Header data
The header data of the Enjoy purchase order is transferred in table PoHeader.
Item data
The item data of the Enjoy purchase order is stored in the tables PoItem (general item data). Changes regarding quantity and delivery date are to be made in the table PoSchedule.
Use the table PoAccount to change the account assignment information.
Services and limits
Changes to existing items cannot be carried out with the Change method. It is only possible to create new items.
Conditions
Conditions are transferred in the table PoCond; header conditions in the table PoCondHeader. A new price determination process can be initiated via the parameter CALCTYPE in the table PoItem.
Vendor and delivery address
The vendor address in the table PoAddrVendor and the delivery address in the table PoAddrDelivery can only be replaced by another address number that already exists in the system (table ADRC). Changes to address details can only be made using the method BAPI_ADDRESSORG_CHANGE.
Partner roles
You can change all partners except the partner role "vendor" via the table PoPartner.
Export/import data
Export/import data can be specified per item in the table PoExpImpItem. Foreign trade data can only be transferred as default data for new items. Changes to the export/import data of existing items are not possible.
Texts
Header and item texts can be transferred in the tables PoTextHeader and PoTextItem. Texts for services are imported in the table PoServicesText. Texts can only be replaced completely.
Version Management
You can make use of the Version Management facility via the table AllVersions.
Return
If the PO was changed successfully, the header and item tables are populated with the information from the PO.
Return messages
Messages are returned in the parameter Return. This also contains information as to whether interface data has been wrongly or probably wrongly (heuristical interface check) populated. If a PO has been successfully created, the PO number is also placed in the return table with the appropriate message.
Restrictions
With this function module, it is not possible to:
Create subcontracting components (you can only use existing ones)
Create configurations (you can only use existing ones)
Change message records (table NAST) and additional message data (this data can only be determined via the message determination facility (Customizing))
Attach documents to the purchase order
Change foreign trade data
Change service data
Change or reexplode BOMs
A firewall prevents the manipulation of data that is not changeable in Purchasing according to the business logic of the purchase order (e.g. PO number, vendor, etc.).
PO items with an invoicing plan cannot be created or changed using the BAPIs
In this connection, please refer to current information in Note 197958.
To change addresses with numbers from Business Address Services (cantral address management), please use the function module BAPI_ADDRESSORG_CHANGE.
To change variant configurations, please use the function module BAPI_UI_CHANGE. More information is available in the BAPI Explorer under the Logistics General node.
In the case of changes that are to be made via the BAPI_PO_CHANGE, a firewall first checks whether the relevant fields are changeable. This approach follows that of the online transaction. Here it is not possible to change the vendor or the document type, for example.
Example
Example of changes made to a purchase order with:
1. Change in header data
2. Change in item
3. Change in delivery schedule
4. Change in account assignment
5. Change in conditions
6. Change in partners
Parameter: PURCHASEORDER 4500049596
Parameter: POHEADER
PMNTTRMS = 0002
PUR_GROUP = 002
Parameter: POHEADERX
PMNTTRMS = X
PUR_GROUP = X
Parameter: POITEM
PO_ITEM = 00001
CONF_CTRL = 0001
Parameter: POITEMX
PO_ITEM = 00001
PO_ITEMX = X
CONF_CTRL = X
Parameter: POSCHEDULE
PO_ITEM = 00001
SCHED_LINE = 0001
QUANTITY = 10.000
PO_ITEM = 00001
SCHED_LINE = 0003
DELETE_IND = X
Parameter: POSCHEDULEX
PO_ITEM = 00001
SCHED_LINE = 0001
PO_ITEMX = X
SCHED_LINEX = X
QUANTITY = X
PO_ITEM = 00001
SCHED_LINE = 0003
PO_ITEMX = X
SCHED_LINEX = X
DELETE_IND = X
Parameter: POACCOUNT
PO_ITEM = 00001
SERIAL_NO = 01
GL_ACCOUNT = 0000400020
Parameter: POACCOUNTX
PO_ITEM = 00001
SERIAL_NO = 01
PO_ITEMX = X
SERIAL_NOX = X
GL_ACCOUNT = X
Parameter: POCOND
ITM_NUMBER = 000001
COND_TYPE = RA02
COND_VALUE = 2.110000000
CURRENCY = %
CHANGE_ID = U
Parameter: POCONDX
ITM_NUMBER = 000001
COND_ST_NO = 001
ITM_NUMBERX = X
COND_ST_NOX = X
COND_TYPE = X
COND_VALUE = X
CURRENCY = X
CHANGE_ID = X
Parameter: POPARTNER
PARTNERDESC = GS
LANGU = EN
BUSPARTNO = 0000001000
Help in the Case of Problems
1. Note 197958 lists answers to frequently asked questions (FAQs). (Note 499626 contains answers to FAQs relating to External Services Management.)
2. If you have detected an error in the function of a BAPI, kindly create a reproducible example in the test data directory in the Function Builder (transaction code SE37). Note 375886 tells you how to do this.
3. If the problem persists, please create a Customer Problem Message for the componente MM-PUR-PO-BAPI, and document the reproducible example where necessary.
Customer Enhancements
The following user exits (function modules) are available for the BAPI BAPI_PO_CREATE1:
EXIT_SAPL2012_001 (at start of BAPI)
EXIT_SAPL2012_003 (at end of BAPI)
The following user exits (function modules) are available for the BAPI BAPI BAPI_PO_CHANGE:
EXIT_SAPL2012_002 (at start of BAPI)
EXIT_SAPL2012_004 (at end of BAPI)
These exits belong to the enhancement SAPL2012 (see also transaction codes SMOD and CMOD).
There is also the option of populating customer-specific fields for header, item, or account assignment data via the parameter EXTENSIONIN.
Further Information
1. Note 197958 contains up-to-date information on the purchase order BAPIs.
2. If you test the BAPIs BAPI_PO_CREATE1 or BAPI_PO_CHANGE in the Function Builder (transaction code SE37), no database updates will be carried out. If you need this function, please take a look at Note 420646.
3. The BAPI BAPI_PO_GETDETAIL serves to read the details of a purchase order. The BAPI cannot read all details (e.g. conditions). However, you can use the BAPI BAPI_PO_CHANGE for this purpose if only the document number is populated and the initiator has change authorizations for purchase orders.
4. Frequently used BAPIs for purchase orders are BAPI_PO_CREATE, BAPI_PO_CREATE1, BAPI_PO_CHANGE, BAPI_PO_GETDETAIL, BAPI_PO_GETITEMS, BAPI_PO_GETITEMSREL, and BAPI_PO_GETRELINFO.
5. For more information on purchase orders, refer to the SAP library (under MM Purchasing -> Purchase Orders) or the Help for the Enjoy Purchase Order, or choose the path Tools -> ABAP Workbench -> Overview -> BAPI Explorer from the SAP menu.
Parameters
PURCHASEORDER
POHEADER
POHEADERX
POADDRVENDOR
TESTRUN
MEMORY_UNCOMPLETE
MEMORY_COMPLETE
POEXPIMPHEADER
POEXPIMPHEADERX
VERSIONS
NO_MESSAGING
NO_MESSAGE_REQ
NO_AUTHORITY
NO_PRICE_FROM_PO
EXPHEADER
EXPPOEXPIMPHEADER
RETURN
POITEM
POITEMX
POADDRDELIVERY
POSCHEDULE
POSCHEDULEX
POACCOUNT
POACCOUNTPROFITSEGMENT
POACCOUNTX
POCONDHEADER
POCONDHEADERX
POCOND
POCONDX
POLIMITS
POCONTRACTLIMITS
POSERVICES
POSRVACCESSVALUES
POSERVICESTEXT
EXTENSIONIN
EXTENSIONOUT
POEXPIMPITEM
POEXPIMPITEMX
POTEXTHEADER
POTEXTITEM
ALLVERSIONS
POPARTNER
Exceptions
Function Group
2012
</b>
regards
prabhu
Message was edited by: Prabhu Peram -
BAPI for Creation of inspection lot
I have two scenario:-
1.Can any body help to find BAPI for creation of Inspection lot for the material under PO envisaged for PDI.
2. Can any body find me a BAPI or FM which can creates inspection lot in QALS table without inspection lot origin under 01 i.e. 0101 or Z01SI01.
My objective is to creation inspection lot without assigning Inspection type of Z01SI01 or Z01SI02 and so on in the material code under a respective Plant 1004 or 1005 0r 1006 so on.
In my Z Development for creation of inspection lot BDC is run for QA01 as this code created inspection lot on when material code has inspection type Z01SI01 i.e. location of source inspection and vendr code particular classification under 010 vendor class inspection type Z01SI01. System search both the inspection type for both material and vendor then create inspection lot in QALS table by assiging inspection matching inspection on the lot.
I want to get rid of assignment of inspection on the materilal. If any BAPI or FM is avalable for creation of inspection without assigning inspection type on material code. I want to create inspection lot in which Inpsection type assignment can be done based on vendor class only.
YPB2. Can any body find me a BAPI or FM which can creates inspection lot in QALS table without inspection lot origin under 01 i.e. 0101 or Z01SI01.
I am very sure that this is not possible.You can not create inspection lot without inspection lot origin or inspection type.
Regards
Sujit -
BAPI FOR CREATING SALES ORDER WITH REFFERENCE TO QUOTATION
Hi All,
I am creating sales order with refference to quotation by using bapi "BAPI_SALESORDER_CREATEFROMDATA".Able to create sales order but its not refferencing qutation.Is there any other bapi for this scenario.Please guide me.
Regards,
SureshHi ,
Thank you for giving reply I tried by using bapi BAPI_SALESORDER_CREATEFROMDAT2 after execution it giving sales order number but when I am trying to see that sales order system is giving error message as document is not exist.
Please guide me.
Suresh
Maybe you are looking for
-
Select Statement Blocking Delete Operation
Hi Experts, In a Single table am trying to do delete operation but it has been blocked by simple select query. Database setting : Read Committed Snapshot already set to ON for that database. Any Idea why SELECT blocking DELETE. FYI : Before Select st
-
Audio crackles but is fine in FCP
I have tried exporting from FCP to QT file and using compressor (Dolby Prof 2) and the DVD crackles in parts of the DVD, this crackling does not exist in FCP. I tried making an aiff soundtrack file and I still get crackling. How can I fix this?
-
How to make print larger without blurring
On my MacBook Pro I am having problems with my print (fonts) being very small (compared to my G4 which was fine). I fixed my desktop print so that my eyes are not too stressed, however, in all my programs, incoming mail, etc. the screens are very sma
-
Trouble Downloading Indesign CS6 through Creative Cloud
I was wondering if anyone could help me out. I have a creative cloud account and have downloaded previous pieces of software including Indesign CS6. I was having launch issues with Indesign (on OS Mountian Lion) so deleted the package via app zapper.
-
Re: Satellite P300-156 - grainy display and vertical lines on it
Hi, everytime I 1st start up the machine the display looks grainy and with 1 green line vertically down the right hand-side of the LCD. When Vista completes start-up (with my white desktop background), there is lots of pink coluring on icon, when I p