Bapi giving error for a user of different language

Hi all,
I have a wd java application with internationalization done. It works fine except for Swedish.
The scenario:
I am calling a BAPI to generate an order no by sending customer no and not sending the language.
When I execute BAPI in SE37, it works fine but when called from wd java it returns an error.
This is happening only for one language users(Swedish).
Anu pointers regarding this are most welcome.
Thanks and Regards,
Avinash

hi
can you provide the error stack , what error you are facing with .
and other thing try to provide the external debugging with hard coding the language for the
RFC and check , whether you are able to get the output .

Similar Messages

IW32- order-print is giving error for particular User.

Dear Friends,
IW32- order-print is giving error for particular User and output type. Debugging authorization restricted on the system, hence I canu2019t trace out the problem. If anybody comes across such issues, please reply to the post.
Thanks In Advance for your reply.
Anil Dasari
Thanks In Advance.

Hi,
Information about dump:
1. User and Transaction:
Runtime Errors         MESSAGE_TYPE_X
Date and Time          06.05.2011 10:47:40
     MM Used. 13116304
     MM Free. 3639760
User and Transaction
     Client.............. 700
     User................ "BLADEF01"
     Language key........ "N"
     Transaction......... "IW32 "
     Transactions ID..... "4DC387ECA12B684DE10000001A5B1803"
     Program............. "/MRSS/SAPLRSG_PM_ORDER"
     Screen.............. "SAPLCOIH 3000"
     Screen line......... 33
Information on where terminated
     Termination occurred in the ABAP program "/MRSS/SAPLRSG_PM_ORDER" - in
      "/MRSS/RSG_MAINTAIN_MRS".
     The main program was "SAPLCOIH ".
     In the source code you have the termination point in line 441
     of the (Include) program "/MRSS/LRSG_PM_ORDERU04".
2. Info. Where it got terminated.
Information on where terminated
    Termination occurred in the ABAP program "/MRSS/SAPLRSG_PM_ORDER" - in
     "/MRSS/RSG_MAINTAIN_MRS".
    The main program was "SAPLCOIH ".
    In the source code you have the termination point in line 441
    of the (Include) program "/MRSS/LRSG_PM_ORDERU04".
3. How to correct the error.
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "MESSAGE_TYPE_X" " "
    "/MRSS/SAPLRSG_PM_ORDER" or "/MRSS/LRSG_PM_ORDERU04"
    "/MRSS/RSG_MAINTAIN_MRS"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1.1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2.2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3.3. If the problem occurs in a problem of your own or a modified SAP.
I have been searching for notes recently implemented for IW32.
Thanks and Regards,
ANIL DASARI

Item Open Interface giving error for Org Assignment

We ran the MTL_SYSTEMS_ITEMS_INTERFACE & loaded all the items at master level.
We are having issues in setting at Org level. Cant figure out what the issue as only few records gets assigned & then garbage sets in for remaining records. An SR has been raised & the tech support representative was saying that UOM's are different at master & org levels. Never heard of this issue earlier. I have worked with UOM's different at Master/Org levels.
The UOM's are different at Master & Org Level and in some cases the UOM are different for different Orgs. Attribute Control for Primary/Sec UOM is at Org level. The UOM's belong to the same UOM Class. There are standard conversions defined for all these UOMs.
Any pointers for quick resolution ?

Pl do not post duplicates - Item Open Interface giving error for Org Assignment

MySite – My Content Page is not working and giving error for existing customers

We are using SharePoint 2010 and recently moved to SharePoint 2013. Central Admin run under SP 2013 and Content Db Front End run under SP 2010.
After migration the MySite – My Content Page is not working and giving error for existing customers (http://mysite.ss.com/_layouts/MySite.aspx?Error=4705).
New users (after migration) are able access the My Content and adding documents but old users can’t.
Can anyone help me on the above?

I think you might be using non claims web app in 2010, if that is the case, you 'd need to convert your existing users to claims users for which you can refer to http://technet.microsoft.com/en-us/library/gg251985(v=office.15).aspx
to check if your exisiting users are claims or classic users , try
get-spuser -web http://mysite.ss.com -limit all
check in the output if you see the claims GUID in form of user names like i:0#.w|domain\username, if yes, they claims users if you just see Domain\username, you want those users to be converted to calims.
i'd need more details to be specific about my answer but aforementioned scenario is most common of all, hope this helps,
Thanks, Noddy

OdiSqlUnload giving error for network location specified

Hi,
I have been trying to use OdiSqlUnload tool to create text files on Network machine.
But it is giving following error
oracle.odi.oditools.OdiToolInvalidParameterException: Error while setting parameters on tool
at com.sunopsis.dwg.function.SnpsFunctionBase.getCoreOdiTool(SnpsFunctionBase.java:607)
So as per error it is saying parameters specified are incorrect.
Let me also paste for you Code i have used.
OdiSqlUnload -FILE= \\10.161.102.182\Interfaces\OMP\BUR\snd\RBSIT_#SAP_Filename.txt -DRIVER=<%=odiRef.getInfo("SRC_JAVA_DRIVER")%> "-URL=<%=odiRef.getInfo("SRC_JAVA_URL")%>" "-USER=<%=odiRef.getInfo("SRC_USER_NAME")%>" "-PASS=<%=odiRef.getInfo("SRC_ENCODED_PASS")%>" "-FILE_FORMAT=FIXED" "-ROW_SEP=\r\n" "-DATE_FORMAT=yyyy/MM/dd HH:mm:ss" "-CHARSET_ENCODING=ISO8859_1" "-XML_CHARSET_ENCODING=ISO-8859-1"
SELECT * FROM ompodi.start_record
As here i have specified network location, does it mean i cannot create files on ntwork machine directly?
If so then is there any way to move files to network machine location from host computer?
Also i would like to know any tool for deleting files , preferably network location.
Thanks and Regards,
Mahesh

IT WAS GIVING ERROR BECAUSE IN SOURCE COMMAND I HAVENT SPECIFIED SOURCE TECNHOLOGY AND LOGICAL SCHEMA.
ALSO IN ABOVE COMMAND THERE IS NO NEED TO WRITE QUERY WORD EXPLICITELY.
SO IT SHOULD BE AS
OdiSqlUnload -FILE=D:\Patrol\kaname2alert.txt -DRIVER=<%=odiRef.getInfo("SRC_JAVA_DRIVER")%> "-URL=<%=odiRef.getInfo("SRC_JAVA_URL")%>" "-USER=<%=odiRef.getInfo("SRC_USER_NAME")%>" "-PASS=<%=odiRef.getInfo("SRC_ENCODED_PASS")%>" "-FILE_FORMAT=FIXED" "-ROW_SEP=\r\n" "-DATE_FORMAT=yyyy/MM/dd HH:mm:ss" "-CHARSET_ENCODING=ISO8859_1" "-XML_CHARSET_ENCODING=ISO-8859-1"
select 'FAILURE ',trim(nvl(substr(substr( PACKAGE_NAME||',', 1, instr(PACKAGE_NAME,',')-1 ),7),'Error Due to missing scenario or Any other unlogged error')) Package_Name,to_char(FAILURE_TIMESTAMP,'DD-mm-yyyy HH24:MI:SS') Execution_Time from <%=odiRef.getSchemaName("OMP","W")%>.ERROR_MESSAGES order by failure_timestamp desc
HOPE IT WOULD HELP SOMEONE.
SO POSTING IT.

Message to be make error for specific user id

Hi Experts,
I have converted message 06 28 to error to not allow to create PO in back date. Now i want to allow some User ID's to create PO in back date. Is it possible ??
Regards,
Manish Jain

Yes. Use versions function.
After having saved the message categories as different versions, you can assign a version to certain users. This results in the same message appearing as an error message for one user, but as warning for another.
For this purpose, you must assign the parameter ID "MSV" and the version number to the relevant user master records.

Getting mail authentication errors for outlook user sending mail

When Outlook 2010 user attempts to use port 587 to send mail (to himself at this point), we see the following in the server logs:
(User in question can attach to file shares on the same server just fine from his Windows laptop)
Outlook config for outbound server is "port: 587, encryption TLS"
When we connect, we get "connection interrupted by server"
Tried other encryption methods - outlook 2010 states that server does not support the other methods (None, SSL)
SMTPD Logs
Jul 29 22:22:58 <servername>.l-n-l.com postfix/smtpd[2306]: connect from <Outlook Client Name>[<Outlook ClientAddr>]
Jul 29 22:22:58 <servername>.l-n-l.com postfix/smtpd[2306]: error: validate response: error: Authentication server failed to complete the requested operation.
Jul 29 22:22:58 <servername>.l-n-l.com postfix/smtpd[2306]: error: validate response: authentication failed for user=colin (method=DIGEST-MD5)
Jul 29 22:22:58 <servername>.l-n-l.com postfix/master[1407]: warning: process /usr/libexec/postfix/smtpd pid 2306 killed by signal 6
Jul 29 22:22:58 <servername>.l-n-l.com postfix/master[1407]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling
Jul 29 22:24:12 <servername>.l-n-l.com postfix/smtpd[2270]: timeout after END-OF-MESSAGE from localhost[127.0.0.1]
Jul 29 22:24:12 <servername>.l-n-l.com postfix/smtpd[2270]: disconnect from localhost[127.0.0.1]
Meanwhile: Mac clients are able to connect to smptd submission port to send mail with no problems. Based on what the logs say, it appears that the Mac mail is using a different authentication mechanism.
Client config for outbound server is "use custom port: 587, Use SSL:Checked, Authentication: MD5 Challenge-Response"
Jul 29 22:19:12 <servername>.l-n-l.com postfix/smtpd[2261]: connect from <Mac Client Name>[<MacClientAddr>]
Jul 29 22:19:12 <servername>.l-n-l.com postfix/smtpd[2261]: 721FCEC991: client=<Mac Client Name>[<MacClientAddr>], sasl_method=CRAM-MD5, sasl_username=<username>@l-n-l.com
Jul 29 22:19:12 <servername>.l-n-l.com postfix/cleanup[2267]: 721FCEC991: message-id=<[email protected]>
Jul 29 22:19:12 <servername>.l-n-l.com postfix/qmgr[1800]: 721FCEC991: from=<[email protected]>, size=573, nrcpt=1 (queue active)
Jul 29 22:19:12 <servername>.l-n-l.compostfix/smtpd[2270]: connect from localhost[127.0.0.1]
Jul 29 22:19:12 <servername>.l-n-l.com postfix/smtpd[2270]: E722AEC9A0: client=localhost[127.0.0.1]
Jul 29 22:19:12 <servername>.l-n-l.com postfix/cleanup[2267]: E722AEC9A0: message-id=<[email protected]>
Jul 29 22:19:12 <servername>.l-n-l.com postfix/qmgr[1800]: E722AEC9A0: from=<[email protected]>, size=994, nrcpt=1 (queue active)
Jul 29 22:19:12 <servername>.l-n-l.com postfix/smtp[2268]: 721FCEC991: to=<[email protected]>, relay=127.0.0.1[127.0.0.1]:10024, delay=0.55, delays=0.06/0.01/0.01/0.48, dsn=2.0.0, status=sent (250 2.0.0 from MTA(smtp:[127.0.0.1]:10025): 250 2.0.0 Ok: queued as E722AEC9A0)
Jul 29 22:19:12 <servername>.l-n-l.com postfix/qmgr[1800]: 721FCEC991: removed
Jul 29 22:19:13 <servername>.l-n-l.com postfix/pipe[2273]: E722AEC9A0: to=<[email protected]>, relay=dovecot, delay=0.13, delays=0/0.01/0/0.12, dsn=2.0.0, status=sent (delivered via dovecot service)
Jul 29 22:19:13 <servername>.l-n-l.com postfix/qmgr[1800]: E722AEC9A0: removed
Jul 29 22:20:12 <servername>.l-n-l.com postfix/smtpd[2261]: disconnect from <Mac Client Name>[<MacClientAddr>]
Running OS X 10.8.4 with Server 2.2.1.
Any thoughts on what I need to do to make OSX Server mail play nice with Outlook over the submission port?
Thanks in advance!!

Ok - so I think I have it almost all sussed. So for all 3 of you who might be reading this, here is what is going on.
1) As I expected, this has nothing to do with the FQDN/Outlook problem. I actually rejoiced when I finally got far enough to have that problem with my Outlook 2007 and 2010 clients. And I don't like the recommended fix for that either. There is another way - more on that in a minute.
2) This problem was all about authentication methods. At present, I have OS X Mail Server set for plain text and APOP only. I will be working to fix this soon - but at present I am unable to find any other combination that permits both Mac Mail and Outlook clients to authenticate properly. Mac Mail wants to use CRAM-MD5 by default. Outlook is so incompatible with CRAM-MD5 that even when there are other authentication methods available on the mail server, if CRAM-MD5 is selected on the Server then Outlook fails miserably no matter how you configure the Outlook client. Caveat: this is my own observation and I still have some experimenting to do. If you know otherwise (or can confirm more definitively), then please speak up!
So here is the working configuration at present:
   A) Mail Server authentication set to Custom with PlainText and APOP selected, all others blank.
   B) Firewall permits inbound from ports 25 (for mail from "outside"), 587 (submission for authenticated users, TLS) 993 (SSL IMAP), and 995 (SSL POP).
   C) Mac POP Clients:
      i) For retrieval (POP) In advanced settings, use Port 995, Check "Use SSL", Select APOP for authentication.
      ii) For submission (SMTP) : Set port 587 (only), Set Authentication to "Password"
    D) Outlook 2007,2010,2013 clients
       i) For retrieval (POP), Set "Require secure logon using SPA"
      ii) In "More Settings/Outgoing Server" set it to require authentication with same credentials as inbound
     iii) In "More Settings/Advanced"
         a) Turn on Encryption for the POP3, this should change the port to 995 automatically. If it does not, fix that too.
         b) Set outgoing server to 587
         c) Set TLS for the encryption type (nothing else will work here)
Once you do 2.A, 2.B, 2.D, you will THEN, finally encounter the FQDN problem.
3) So Apple and a lot of folks here in the forums resolve the FQDN problem by removing one of the restrictions:
    Remove "reject_non_fqdn_helo_hostname" from "smtpd_helo_restrictions" in your postfix main.cf file.
I have at least 2 problems with this:
   A) It removes yet another little bit of security from the setup
   B) It involves non-GUI changes to the config...which is dangerous if you use the GUI, as changes within the GUI will often result in overwrites to your changes outside the GUI. So you can easily lose this fix without being aware of it until one of your Outlook users starts screaming.
The problem is really with Outlook and Windows not sending the FQDN in the first place. So how about we force them to do that instead? It turns out not to be too hard. I found a thread somewhere that goes into this and it works. Further, the solution remains on through reboots AND also can be made part of an automated deployment of a standard config. The only gotcha is you have to edit the registry...so you have to be careful. You only need to do this ONCE though, and the two entries are easy to find.
C) Under HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/services/Tcpip/Parameters
       i) Set Hostname to the FQDN of your host (replace HOST with HOST.domain.com - or .net, or whatever)
      ii) Set NV Hostname to the FQDN of your host
      iii) Close Regedit and Reboot to have the changes take effect
Once you do this, the FQDN problem for Outlook users goes away.
So I am looking for suggestions to make the SMTP submission more secure. Aside from that, things are working - and I have had to make ZERO changes to config files outside of the Server GUI - a plus as far as I am concerned.

Lyncdiscover reports HTTP 500 Internal Server Error for external users

Hello,
I have a problem providing lyncdiscover information for external Lync users. The same address works internal (prompts for file download) so I believe the problem is UAG/TMG providing the site which is not my cup of tea. I have a working external lyncdiscover
for other domain in the same Lync + UAG/TMG server environment. I have also checked the public DNS records few times and everything should be fine. Firewall also shouldn't be an issue since it reports the internal server error, right? Any suggestions what
should I check?

more information based on Lync Autodiscover Web Service Remote Connectivity Test.
Testing HTTP authentication methods for URL https://lyncdiscover.domain1.com/Autodiscover/AutodiscoverService.svc/root/user.
HTTP authentication methods successful.
Additional Details
Testing HTTP content for URL https://lyncdiscover.domain1.comi/?sipuri=[email protected] has
token="User".
HTTP content isn't verified.
<label for="testSelectWizard_ctl12_ctl06_ctl00_ctl04_tmmArrow">Tell
me more about this issue and how to resolve it</label>
Additional Details
HTTP 200 status received from server, but no token="User".
Elapsed Time: 203 ms.
The same result goes for the other domain that provides the lyncdiscover information correctly for external users. It doesn't seem to solve the root cause but might help to understand
the problem.

Portal Runtime Error for WPC user

Hi experts,
I assign wpc_editor_role for my user. But he is getting Portal Runtime error everytime he try to create link list/teaser/paragraph, publish webpage, finish webpage. The error is as follows:
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 10:55_27/05/09_0002_21582350
Refer to the log file for details about this exception.
For your information, the WPC is working fine for administrator ID. Please help me to solve this problem.
Rgds,
Nanie Arianie

Nanie,
Please ensure that you have the permissions set as per this help.
[Defining Permissions in the Portal Content Studio|http://help.sap.com/saphelp_nw70/helpdata/EN/45/f91dd13c7a04aae10000000a114a6b/content.htm]
[Setting Initial Permissions for Folders|http://help.sap.com/saphelp_nw70/helpdata/EN/a6/78aa5c2ab64c1d83db59a25793e9eb/content.htm]
This should ensure that your issue is taken care of.
Good Luck.
Cheers!
Sandeep Tudumu

With the new seession in IE gives session error for new user

Hi,
In new opened IE if i tries to login with new user. It is switching b/w the files in the status bar(ie., Header1.jsp and ListServicecall.jsp simultaneously) and at end the session error result will arise.
But for the second time if i login with the same username/password the page is displaying properly. please Can any one help out.
Thanks,
Satish R

First time if the user logins to IE in the HP Service Desk(SD) page. Some of the pages will iteratively loops and give a session expires error. After that the user logins to the page with no error.
If i create a new copy of the data from the existing folder and if i try to run then the result will be error for that folder also.
ie., Assume folder 123 where, first time for every new login user the session expire error occurs. later they'll login without any problem.
If i rename the folder 123 to xyz/create new copy and rename then, the same problem repeats. First time for the new user it will give session expire error and later he can login to the HPSD page with no error.
Is it require cookies to be programmed in that program.
Regards,
Satish R

How to grant access to sharepoint for the user from different Domain

Hi All
I need to grant access to user from different domain.
Where I can able to view the users in people picker (different domain).
Thanks in Advance.
Raj

Hi
Trevor Seward
Sorry to disturb
you again.
I am trying to restrict user from search from other domain, say we have domain A and Domain B, where I am trying to restrict all the user from domain B (Search users)for a site collection. I have found couple of stsadmin command to do so. but none
of them works. Below are the commands I have tried
STSADM.exe -o setproperty -pn peoplepicker-searchadforests -pv "domain:<Name>.domain" -url "http://Site URL"
stsadm -o setproperty -pn peoplepicker-searchadcustomquery -pv “(canonicalName=<Name>.domain*)” -url "Site URL"
we have two way trust.
Can you suggest any solution.
Thanks
Raj

XdbConfiguration.sql giving errors for package XDB_CONFIGURATION

Hi,
I am getting following errors(at the bottom) while running xdbConfiguration.sql before installing the demo.
I am logged in as sys user(sysdba) and using running
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
on Windows2000.
Is the wrong version of Oracle. Do I have have 9.2.4.0.
Thanks in advance for help.
Om Soni
Errors for PACKAGE BODY XDB_CONFIGURATION:
LINE/COL ERROR
51/6 PL/SQL: Statement ignored
51/54 PLS-00302: component 'DELETE_FORCE' must be declared
56/4 PL/SQL: SQL Statement ignored
56/20 PL/SQL: ORA-22970: name does not correspond to an object view

Hi ,
I upgraded to 9.2.0.4.0. The error still shows up while running the xdbConfiguration.sql.
The following errors show up:
Errors for PACKAGE BODY XDB_CONFIGURATION:
LINE/COL ERROR
51/6 PL/SQL: Statement ignored
51/54 PLS-00302: component 'DELETE_FORCE' must be declared
56/4 PL/SQL: SQL Statement ignored
58/9 PL/SQL: ORA-00942: table or view does not exist
I got rid of first two error by removing dbms_xdb.DELETE_FORCE from line
dbms_xdb.deleteResource(targetResource,dbms_xdb.DELETE_FORCE);
Last two error are at line :
select make_ref(DATABASE_SUMMARY,'DATABASE_SUMMARY')
into xmlref
from DATABASE_SUMMARY;
Looking at the script DATABASE_SUMMARY is not a object.
May be the script has a bug in it.
-Om

Incontext Editing Sign in Error For Valid Users

I set up two incontext editing users as publishers and they
worked fine yesterday. Today they get SIGN IN ERROR , YOU ARE NOT A
REGISTERED USER OF THIS PRODUCT. PLEASE FOLLOW REGISTRATION
STEPS..."
On the Admin panel for these users are listed correctly as
publishers. Yes they checked the spelling and case. NOT WORKING! We
need this working ASAP.

Hello hmcom,
Looking at your URL, I've noticed that both
http://baltimorecarpets.com
and
http://www.baltimorecarpets.com
are registered to the InContext Editing service. InContext Editing
sees them as two separate sites and the users associated with them
are not shared between sites.
The problem that you have might be caused by the fact that
the publishers have been invited for one of these sites, but when
they try to login they are using the other URL (with or without the
'www' part). You should keep a single site registered (the one that
has the publishers invited), and delete the other one (using the
Remove website button from the InContext Editing Portal). Also, you
should instruct the publishers to
Please let us know if you have any questions/problems.
Thank you,
Florin

Top N query giving error for oracle 8.0.6

Dear All,
We are executing this query SELECT XBLNR, WERKS, MATNR, MDV01, BACKFLQUANT, STATUS, SAPTIMESTAMP, PITSTIMESTAMP, PMTIMESTAMP, BATCH FROM (SELECT XBLNR, WERKS, MATNR, MDV01, BACKFLQUANT, STATUS, SAPTIMESTAMP, PITSTIMESTAMP, PMTIMESTAMP, BATCH FROM PMBPITS.PITS_UNITY WHERE STATUS = '01' ORDER BY PMTIMESTAMP) WHERE ROWNUM < 20
on oracle 8.0.6 but this is giving the following error
ora - 00907 missing right parenthesis error
1. Is it that in the inner select we cannot use order by and where clause together.
2. We also found that if we remove order by from inner select then the query is not giving error
pls help . points will be awarded

Hi,
what ever the Aman said is correct. You check this is supported in 8.1.5, SQL allows you to embed the ORDER BY clause in a subquery and place the ROWNUM condition in the top-level query;
'Top-N query' is a ORACLE 8i feature which is supported in SQL. However,
Bug:855720 states the following:
"PL/SQL does not support top-N queries (ORDER BY in SUBSELECT/SUBQUERY
or VIEW. Since this feature is available in SQL, but not in PL/SQL,
it has been logged as a Bug that will be fixed in 8.1.6."
- Pavan Kumar N

Giving Access for an User On One Schema.

Hi all,
I want to give read,write and execute access for an user in one schema and only read access to another two users.
How can I give..Please suggest.

Hi,
Well in that case you may have to give the select privilege to a particular user for all tables.
Or
You may like to create two roles, and give select privilege to a particular role for all tables. And give write i.e. insert/update privilege to the other role. Then assign this role to the user whom you like to give the access.
Regards
Anurag Tibrewal.

Bapi giving error for a user of different language

Similar Messages

Maybe you are looking for