BAPI_INCOMINGINVOICE_CREATE : Payment Terms not appearing

Dear All,
In the Bapi "BAPI_INCOMINGINVOICE_CREATE ", i am passing the HEADERDATA (invoice_ind, doc_type, doc_date, pstng_date, ref_doc_no, comp_code, diff_inv, currency, gross_amount, pmnttrms) and ITEMDATA (invoice_doc_item, po_number, po_item, tax_code as 0, item_amount, quantity, po_unit, cond_type)
and when i run the Bapi,the invoice document is getting generated successfully and in the display mode(Transaction:mir4) when i give this invoice no. all the values which i have passed to bapi are captured correctly except the PAYMENT TERMS is blank.
THOUGH I AM PASSING THE PAYMENT TERMS IN THE BAPI, THE PAYMENT TERM IS BLANK IN THE GENERATED INVOICE.
Can anyone please give me a correct solution.
Thanks & Regards
Sajid

I think SAP does not support this functionality!!!!!

Similar Messages

Payment term not appearing in PO print out

Hello all,
We have one PO where Payment term is not appearing in PO print out. I have checked other POs of the same type where its appearing in print out. In PO header payment term is maintained. Does this flow from Vendor mastre?
Regards

Hi,
Is this payment term is new one !
Yes, payment term should flow from vendor master to PO.
Now as payment term not printed in PO print, just check with your PO output type & related FORM or PDF/SmartForm in it for application EF in NACE t.code. Also check SmartForm in t.code: SMARTFORMS . Or if FORM check in t.code:SE71 / SE73 the SapScript & see inclusion of all payment term in it with help of with ABAP consultant.
Regards,
Biju K

Payment Terms (ZTERM) - Appears in FB60 but not FB70

Hello all,
Currently our system does not show the Payment Terms field in Tcode FB70 (Enter Customer Invoice). There is a requirement to have this field appear.
However, when going to Tcode FB60 (Enter Vendor Invoice), the Payment Terms field appears.
After doing research, I believe I can make this field appear through SAP IMG --> FI Accounting --> FI Accounting Global Settings --> Document --> Line Item --> Controls --> Maintain Field Status Variants (this can be found via Tcode OBC4). When in this Tcode, I'm not sure what Field Status Group controls the parameter to currently supress the Payment Terms field in FB70. I'm also not entirely confident this is the location to make Payment Terms an optional entry field in FB70.
Any help would be greatly appreciated.

Thank you so much, that is the answer. Payment Terms was not appearing in FB70 because the Field Status Group in the G/L account for the customer was set to a value that suppressed Payment Terms. When the Field Status Group is changed in Tcode FS02 to a value that recognizes Payment Terms as an Optional Entry, the Payment Terms field appears in FB70. Ironically, only one customer had the incorrect value that suppressed the field.

How to make "payment terms" not modifiable in sales order

Hello every 1,
please help, i want to know:
how to make "payment terms" not modifiable in a sales order , as we know it comes directly from CMR and client wants "PAYMENT TERMS" to be not modifiable.
Look forward for your response.
Thanks in Advance,
Deepak

You need to use SHD0 or userexit chnages, like always determine from customer master, if user changes, give message like not modifiable or ask abaper to make non modifable field

Payment Term to appear compulsorily in all line items

Hi All,
There is a requirement from the client that payment term should appear compulsorily in all line
items in FBL5N.
To make the above possible one solution proposed is that to make payment term as a required
entry in field status group of customer GL reconciliation account , and make payment term optional in Field status of the following posting keys which is now suppressed
05- Outgoing Payment
07- Other Clearing
15- Incoming payment
17- Other clearing
18- Payment Clearing
Are there any drawback if we go ahead with the above configuration, or is there any better solution. Please get back immediately as its an urgent requirement.
Regards
Milind Nair

hello,
Isnt there anyone who can provide a solution.
Regards
Milind Nair

Payment terms not exist in contract

Dear SAP experts,
We are in SRM 7 and ECC 6 and using extended scenario. For payment terms we download payment terms from ECC by using program BBP_UPLOAD_PAYMENT_TERMS and entries created in table BBP_PAYTERM. When we create PO we can use this payment terms from ECC. However the odd thing happen when we create contract, we can see the paymet terms as possible selection, but if we select it we got error 'Payment term not exist in target system'. However if we create payment terms directly in SRM (using config payment conditions), then we can choose the payment term from SRM.
But this is not making any sense as why do we need to have duplicate payment terms one coming from ECC and the other coming from SRM. Do I miss something in here? (Note that in RFx response, vendor can NOT choose payment terms locally in SRM as they can ONLY see the one coming from ECC).
Best regards,
John

Hi John,
Please implement the following note & retest this issue:
1609905 Validation for local contracts contains errors
Kind Regards,
Edel.

Payment Method not appearing in Document entry

Hi
I have created one vendor for which payment term & payment method is entered in Vendor mater record (FK01) whereas, when i post the invoice for the same vendor through FB60, i can see the payment terms in document but payment method is not appearing.
please help me as how to resolve this issue
Regards
Jyotsna Narvekar

Hi Mauri
Thanks a lot !!!
This OBB8 setting is working, but still i have a doubt.
In OBB8, the payment method is maintained for a particular payment term. if i have different payment method for the same payment term then what is to be done?
to be very specific, if payment method 0001 is to be used for cheque payment as well as Bank Transfer then what should be the correct approach. what setting we should do to have a correct output?
another question arises is that, why the payment method is not getting copied from the vendor master record?
Pl help
Regards
Jyotsna Narvekar

HELP! Payment Method Not Appearing!

Hello All,
I am running Vendor report S_ALR_87012103 and for some reason the payment methods are not showing up. I have them entered in the Vendor master records. Could some one let me know how I can get them to appear?
Points will be awarded generously!
Thanks,
Deki

Hi Jaya,
The thing is when the report is run without dynamic selection, payment methods for all the line items displayed does not appear. Therefore, if I specify a payment method using dynamic selection, the system simply tells me that none of the line items have payment methods assigned to them.
- Deki

Payment Terms not copied from Vendor Master to PO

Hello,
PO was created for a Vendor and Vendor master has the correct payment terms but they did not get copied to the PO.
Thanks
Megha

Hi Megha,
Did you maintain the payment terms in the Purchasing area of the vendor?
SAP says
Master records have separate areas for Financial Accounting, Sales, and Purchasing. You can specify different terms of payment keys in each of these areas. When you then enter a business transaction, the application in question will use the key specified in its area of the master record.
Thanks
Aravind

Payment term not subject to change

Hi
All of our users can change payment terms in customer and vendor invoices posted. We want to restrict this authorization for end users and allow credit control and vendor development users to change. How can this be achieved?

Hi:
Please note that it is not possible to restrict the change of this field user wise using standard configuration which can be accomplished using OB32 document change rules. However exit RV60AFZC can be used to meet your requirement .You will need ABAP help for it.
Regards

Payment Terms not getting populated on Intercompany Invoice document(FB50L)

Hi All,
I am facing an issue with the Vendor and/or Customer payment term on the inter-company invoice posted via FV50L/FB50L.
We have defined companies as vendors and customers so that we could do the inter-company posting. The inter-company processing is done by FV50L/FB50L with postings to the GL accounts in respective company codes directly. Once it gets posted, SAP automatically creates 2 document: Vendor invoice and Customer invoice. The vendor invoice document would have the credit line item created automatically and so is the debit line item for the customer invoice.
However, the payment terms from the vendor and/or customer master is not getting populated on the credit / debit line items generated automatically.
I have verified the payment terms on vendor and customer, OBYA config, field status group for posting key & the recon account, authorizations and these thing look good.
Have anyone come across this issue before? Please let me know.
Point will be assigned to valuable suggestions!!
Thanks very much for your help.
Anish

Hi Nakula,
Payment term gets populated correctly from the vendor/Customer master data in case of FB60/FB70 resp. The issue is only with the automatic Intercompany Vendor and Customer line items created where it does not populate the payment terms.
regards,
Shreya

Payment term not allowed to change

in FB70, payment term is brought from customer master data, but user can change it, is there any way we can block it?(not allow user to change payment term , for example , this field greyed out).
in F-28, is there any way we can grey out the document date, so user will not be allowed to change document date, so document date is the current system date.

Hi,
For your first question:in FB70, payment term is brought from customer master data, but user can change it, is there any way we can block it?(not allow user to change payment term , for example , this field greyed out).
You can try to create transaction variant in T-cd:SHD0 to contol it
in F-28, is there any way we can grey out the document date, so user will not be allowed to change document date, so document date is the current system date.
You can try to create validation in T-cD:OB28 to do further check, if you want to use transaction code as prerequisition, please pay attention the default transaction code for F-28 is FBZ1(you can confirm it in T-cd:SE93). in other words, FBZ1 should be used as prerequsition, not F-28.
Example: Prerequsite: SYST-TCODE = 'FBZ1'
Check: BKPF-BLDAT = SYST-DATUM
Otherwise :Message number Z1XXX issued.
Hope above information can help you!
Best Regards,
Gladys xing

Payment Methods not appearing on screen.

Hi FI Gurus
The Payment Method is not appearing on document entry screen (for vendors) in test environment. It appears correctly in PROD/QA environment. Can someone tell me what to change in field status groups along with path in configuration?
Thanks
Rajesh

Dear Rajesh,
Check the posting key field status in OB41. If you are posting a vendor invoice - posting key is 31.
Regards,
Gangadhar

Payment Terms not copying to Items

Hi Guru's
I have a situation where the Payment Terms are not copying to the line items and because of the same it is going to Incompletion log.
Tried different ways.
Maintained in the Cust master Sales data and when we change the same in the Order it is not copying to line items.
Didn't maintain in CustMast- didnt copy to the line items.
how to make it to copy to the line items...
Thanks All.

There are no custom developments done.
Again my issue is we have not maintained any payment terms in the Customer Master.
Process
1) So nothing would be there in the Sale order header
2) They give payment terms manually in the Order Header.
Issue
1) It is not getting copied to the line items.
2) Giving Incompletion log even though it has been entered in the header(reason it is not copying header values to the items), so they have to enter in the line items again, which is painful has they have entered for 100 line items.
Help Needed
How to solve this problem- The ideal solution would be whatever payment term entered, has to get copied to the line items or need to make payment term mandatory in some other way other than Incompletion log.
Any help ?
Thanks

Payment Terms not saved using BAPI_PO_CHANGE

Hi,
We are using BAPI_PO_CHANGE to save changes to the PO.
When I use a Payment Term with 'Day Limit' (i. e Day Limit not zero) the Payment term field in the PO header is blank after commit. This doesnt happen for other payment terms.
Has anyone faced this issue?
Any suggestions will be appreciated.
Ramesh-

Hi ramana ,
How r u populating the two table s?
POCOND
POCONDX of the bapi , can i know the code
here u have to populate all this
COND_TYPE
COND_VALUE
CURRENCY
COND_UNIT
COND_P_UNT
CHANGE_ID(I for insert a new condition ,U for Update , D for delete)
pls checjk thios and Pls ask if u have any thing.

BAPI_INCOMINGINVOICE_CREATE : Payment Terms not appearing

Similar Messages

Maybe you are looking for