BAPI_OBJCL_CHANGE error: valuated with object dependencies

Hi expert,
having programmed an extension for a customer for automatic maintenance of characteristic values of technical object, we have come across an error.
When using BAPI_OBJCL_CHANGE to change a characteristic followed by BAPI_TRANSACTION_COMMIT (without wait) we have two scenarios:
1. if the technical object has no value in the characteristic before calling  BAPI_OBJCL_CHANGE  the characteristic will be set.
2. if there is already a value set there is an error stating
Characteristic 'XYZ' valuated with object dependencies (old value '00')
However, I can't find a dependency definition in CT04. do you know what's wrong here,or what is a usual cause of that?
thanks
Stefan

Hi,
Please see the given link, It may help you.
Re: BAPI_OBJCL_CHANGE and BAPI_TRANSACTION_COMMIT
Regards,
Shamma

Similar Messages

  • BOM UPload with object dependencies

    Hi PP Gurus,
              Does anyone have a LSMW project or upload program to upload BOM with Object Dependencies?.. I would really appreciate if someone could help me. Thank you very much.
    Sincerely,
    Heinrick Palad

    Hi Sir..
          Do you have an existing excel template for this BAPI. I cant seem to find the field where it assigns object dependencies.
    Thank you Sir

  • Batch specefic uom with object dependencies

    Hi all,
    i ' am working in variant configuration environment , i have a products as steel sheets this sheets have length, width, and thickness the so order is in ea, and the sales man configures length , width and thickness, in the configuration of so, i want the system to translate these characteristics as weight in the production order , i read about batch specific unit of measures with object dependencies but i couldn't do it  , can you tell me the required configuration and master data steps to fulfil this requirements?
    Regards,
    Ahmed Sobhi

    Dear Ahmed Sobhi !!!!
    If ur In variant Config Environment U have to Create Characteristic For Sheet  And assign value for that with length Width And Thickness So on like it should be like Permutation and Combination After that u need to make a class for this Characteristicsu2019 then assign this to the Material in classification view and For Finished Material also then and According to the Characteristic u need make a batch Selection either by dimension And In dependency as per the Selection Condition u can Make Selection of Particular Material And U can assign .
    In MSC1N u can call the Characteristic and Assign this to the Desire Batch
    Revert Back
    Pushpalas

  • Generate error list with object detail

    Dear All,
    I have two way (multimaster ) Replication but due to some reason it generated many errors during replicate data so to resolve errors, I want to generate error list (Report) with object details instead viewing them one by one. please guide
    Thanks

    What do you mean with generate error list (Report) with object details ?
    You can get all the errors from DEFERROR view.
    There are columns DEFERRED_TRAN_ID and CALLNO.
    You can join this columns with DEFCALL (DEFERRED_TRAN_ID and CALLNO).
    Joining this two views will provide information about the objects and transaction type involved in the call.
    DEFCALL.PACKAGENAME contains the reference to the table_name.
    DEFCALL.PROCNAME contains information about the transaction type.
    Example:
    select e.deferred_tran_id,
           e.callno,
           e.origin_tran_db,
           c.packagename,
           c.procname
    from deferror e, defcall c
    where e.deferred_tran_id=c.deferred_tran_id
    and e.callno=c.callno(below are the links to the 10gR2 docs containing information about DEFERROR and DEFCALL views. If your database is different version, than search http://tahiti.oracle.com for version specific documentation)
    DEFERROR
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14227/rardeftranviews.htm#sthref2599
    DEFCALL
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14227/rardeftranviews.htm#sthref2595
    Cheers!
    Message was edited by:
    tekicora

  • Select bom items with object dependencies

    Hello everyone,
    this is my problem: during bom explosion from production order I want to select
    a bom item (eg 0020) only if not selected the previous item (eg 0010). there any way? what's the syntax for this object dependencies?
    Thanks to all!

    Hi,
    As per my knowledge we can use selection condition in the BOM with reference to the Characteristics value only. I don't think so, there are options based on previous item selection.
    Let's wait for PP Guru's Answers.
    Thanks,
    R.Loganathan

  • Valuation with material cost estimate: error with product "117122"

    Hi people,
    We have the error:
    =====================
    Valuation with material cost estimate: error with product "117122"
    Diagnosis
    In Profitability Analysis (CO-PA), the system tried to valuate a line item using the current standard cost estimate.
    In order to determine the current plan period, the system needs to read the valuation segment of the material master.
    The system has found that the current plan period is not filled forproduct "117122" in plant "UBE1".
    We have the follow configuration in trans.: KE40:
    . Determine material cost estimate
       . Transf. Standard Cost Estimate
    . Costing Variant
    . Control Data for Standard Cost Estimate
       . Period Indicator = "Current Standard Cost Estimate acc. to entry in mat master
    . Addiitonal data CO-PC
        . Transfer cost estimate in controlling area currency  "activated"
    We think the reason about our error is because the field above is activated and some configuration more is necessary for this case. For examplo: Trans.: OKYW and this one was not configurated yet.
    Do you know what happend?
    If we need to configure some transation, or sonly process the cost estimate?
    Thanks,
    Rosana.

    Hello Guido
    Thank you very much for your return.
    It is happenning in a Client that some people are doing the configuration.
    Before we didin't have in KE40, the fiel "Transfer cost estimate in controlling area currency" activated.
    And now, the people activate that in this new Client and I don't know the impact about that.
    I think we have to make the configuration in OKYW.
    The other transation you told me, we don't have any information.
    Could you tell me some other idea what happend?
    Message error is just "Message no. KE350"
    Abou claculate the cost:
    It was calculated by trans.: CK11N for future planning and the real wasn't not possible to release because this material already have moviments.
    Could you tell us is there is some thing more to do?
    Thanks,
    Rosana.

  • Valuation with material cost estimate: error with product " 200038 "

    Hi,
    I am getting an error:
    Valuation with material cost estimate: error with product " 200038 "  (Message KE350).
    Kindly assist on the same?

    If this material is mto material go to t.code KE40 and maintain define access to standard cost estimate define cost key with
    "Transfer sales orde cost estimatex".
    If it is mts material define costing key with Transfer std cost estimate  and in costing data
    costing variant : ppc1
    costing verstion: 1
    period  indicator:  Release std cost estimate matching with goods issue or material costing matching posting date.
    This will resolve ur problem.

  • Operations with object dependency not showing in CTM PDS

    Hi all,
    When PDS is created in APO, the operations with object dependency are excluded in CTM PDS but in PPDS PDS all the operations are fetched.
    When I remove OD from operations and then CIF (curto_create), the operations are visible in CTM PDS too.
    Please let me know the  possible reasons for operations with OD getting excluded from CTM PDS
    Regards,
    RS

    Hello RS,
    If you are using SCM 7.0 please implement the following instructions in BADI /SAPAPO/CURTO_CREATE, for the method CREATE_CTM_PDS insert the code ev_true = 'x' and Activate it.
    then execute the curto_create transaction, while executing curto_create don't select change transfer. Object dependencies should be visible.
    PS: I assume there is no error in the object dependencies defined and the status of the object dependency is set to released.
    Hope this helps you.
    Thanks and Regards,
    Roopesh

  • Valuation with Material cost estimate

    Hi,
       I am getting an error: "Valuation with material cost estimate:error with product 003443434(material number)
    Does anyone know which transaction is used to correct this error?
    Thanks

    Hi,
    Go to MM02. Select the views of the materials i.e. accounting 1 & 2 , costing 1 & 2 . Look at the valuation class u have maintained for the same material in the view Accounting 1.
    Hope u will get ur problem solved..Assign points, if helpful.
    Satya

  • Variant configuration-- syntax error in creation of object dependencies

    In variant configuration when i try to create object dependency (tcode=cu01), after entering the dependency and also description when i enter the syntax in the source code it is giving error: error in syntax check for simple condition
    I have entered syntax as  : engine_cap in ('1000','1400','2000'), pls guide me with the solution to create object dependency

    Dear, Shakeer
    Please follow along with my very own config guide of variant config.
    1)     Create a configurable Material Using KMAT u2013Material Type. Item Category 0002 and Item Category Group 0002. Go to classification tab-here you maintain the class type 300 and assign the class, we will create this shortly. (So after creating class come back into MM02 and input the class that you create in step 2.)
    2)     Create a class in T-Code CL01. Use class type 300 for Variants. In this we assign the characteristics we will create shortly.
    3)     Create characteristics in T-Code CT04. Create your characteristic like for example, Z_Type, Z_Model, and Z_Color.
    4)     We must create a characteristic for the pricing. Example, Z_CarPrice inside this characteristic we must maintain. Table Name SDCOM, Field Name VKOND in the additional data tab. Also, go to restrictions tab and enter the class type 300 Variants. Now in order to make this pricing work for you, you must maintain (enter) all the values from the characteristics. For example, Red, Blue, Black, Honda, Toyota, GLI, XLI, and 2.0D.
    5)     Now going back to the characteristics in CT04 change mode. Make sure Basic Data has *Multiple Selections circled. * Character Format has 26 and a check in case sensitive. Make sure in restrictions tab class type 300 Variants is present. Go back to Values and highlight the first one. Example, Red then go to Extras->Object Dependencies->Assignments You must maintain this code $self.Z_CarPrice=u2019Redu2019 in basic data make sure itu2019s released & procedure is filled in. Go back to dependency editor and paste the same code there after 000010 $self.Z_CarPrice=u2019Redu2019 and do this for each and every value. Very Important * Maintain configuration profile in T-Code CU41 for the material -> Priority 01, Variant Configuration, Class 300, status, Released 1, then click save. Note: If 2 conditions are inactive use class group A instead of B in SPRO for Condition type VA00.
    6)     Go to T-Code VK11 and enter VA00 condition type. Enter all the values maintained in the characteristics for example, Red, Blue, Black, Toyota, Etc and enter the price then click on save. Now it should work fine in VA01. Make sure you have assigned the VA00 condition type in the pricing procedure.
    Good Luck,
    Muhammad Ali Lozada

  • Valuation with material cost estimate: error with product

    Hi Experts,
    Message no. KE350, Valuation with material cost estimate: error with product "2286940000". Please suggest me to resolve this issue.
    Points will be provided for good solution.
    Regards,
    Jay

    Hi Jaya
    This means that your customization is wrong then...
    In KE4J or KEPC you have assigned costing keys to your material types or some other combination... You should have done this config in a way that costing key is not called  for in the case of non valuated materials...
    In Ke40 you have defined costing key where in you have specified "Issue error msg if no cost estimate found".. This costing key is assigned in KE4J or KEPC in a way that it is getting called even in case of non valuated materials...
    Do you have a separate mat type for non valuated material? If yes, remove this mat type from KE4J/KEPC..
    If you dont have separate mat type i.e. in the same mat type if you have both valuated and non valuated, then you have a problem.. You would get stuck in that case
    Regards
    Ajay M

  • Class with objects compile error in Java 1.5.0 and 1.4.2.05

    Hi, I have some problems with creating objects to my java program.
    See below:
    JAVA, creating new class object.
    class AccountTest {
         public static void main(String[]args) {
         Account olesAccount = new Account(123456676756L, "Ole Olsen", 2300.50);
         olesAccount.deposit(1000.0); //Input of 1000$ to account
         double balance = olesAccount.findBalance(); //Ask object about balance!
         System.out.println("Balance: " +balance);
    ERRORS, from compiler (javac):
    AccountTest.java:7: cannot find symbol
    symbol : class Account
    location: class AccountTest
    Account olesAccount = new Account(123456676756L, "Ole Olsen", 2300.50);
    ^
    AccountTest.java:7: cannot find symbol
    symbol : class Account
    location: class AccountTest
    Account olesAccount = new Account(123456676756L, "Ole Olsen", 2300.50);
    ^
    2 errors
    This error occurs with both java 1.5.0 RC and 1.4.2.05
    */

    Assuming you haven't forgotten to compile the Account class, tt seems to be a problem with visibility. Are you sure your classpath is set up correctly and that the class Account is visible to the AccountTest driver?
    I'd try moving the Account out of whatever package it's in right now and making it public. Then, restrict acces from there.

  • How to fix the .pdf file with error "invalid annotation object"

    how to fix the .pdf file with error "invalid annotation object"

    As long as the PDF opens, then just try saving it to a new file name. There may be a preflight script that would help troubleshoot the issue.

  • Error during precalculation Object variable or With block variable not set.

    Hi
    We are tyring to set up a precal server for broadcasting. The precal server is running on a windows 2003 server and the service is running under a local admin account.
    When we try to run a test workbook, we get the email with the workbook, but there is no data in it.
    The Precal server shows us the following log:
    Connection transfer server BIPRD service sapgw00 system number
    S:RSRPREC:000 BIPRD sapgw00  ALEX
    S:RSRPREC:000 BIPRD sapgw00  ALEX
    S:RSRPREC:000 BIPRD sapgw00  ALEX
    S:RSRPREC:000 BIPRD sapgw00  ALEX
    S:RSRPREC:000 BIPRD sapgw00  ALEX
    Precalculation request type: E, printer: , variant:
    Request dispatched to precalculation DLL
    S:RSRPREC:000 E   ALEX
    S:RSRPREC:000 E   ALEX
    Unresolved exception occurred on the precalculation server
    E
    Error during precalculation Object variable or With block variable not set.
    S:RSRPREC:000  Object[] args  String[] paramnames  Boolean[] CopyBack) ALEX
    S:RSRPREC:000  DataTable iServerProperties  DataTable iVarTable)  Boolean[] CopyBack) ALEX
    S:RSRPREC:000  DataTable iServerProperties  DataTable iVarTable)  Boolean[] CopyBack) ALEX
    S:RSRPREC:000  DataTable iServerProperties  DataTable iVarTable)  Boolean[] CopyBack) ALEX
    Application server requires status report
    Application server requires status report
    Has anyone seen this issue?
    Please let us know, if anyone has any ideas.
    Thanks

    Does the query in the workbook require variable input, and, if so, have you provided a variant in the precalculation setting?

  • ERROR:Unknown WorkItem Object with id #ID#..............

    Hi,
    I am getting this error while updating some user from user login interface. I m using IDM 5.0
    ERROR:Unknown WorkItem Object with id #ID#..............
    Please help me out

    This error comes when the task instance with that ID gets terminated/finished and deleted. The solution is to restart the process you are trying to do. Also, check whether you have imported the required form in repository.

Maybe you are looking for