Operations with object dependency not showing in CTM PDS

Hi all,
When PDS is created in APO, the operations with object dependency are excluded in CTM PDS but in PPDS PDS all the operations are fetched.
When I remove OD from operations and then CIF (curto_create), the operations are visible in CTM PDS too.
Please let me know the possible reasons for operations with OD getting excluded from CTM PDS
Regards,
RS

Hello RS,
If you are using SCM 7.0 please implement the following instructions in BADI /SAPAPO/CURTO_CREATE, for the method CREATE_CTM_PDS insert the code ev_true = 'x' and Activate it.
then execute the curto_create transaction, while executing curto_create don't select change transfer. Object dependencies should be visible.
PS: I assume there is no error in the object dependencies defined and the status of the object dependency is set to released.
Hope this helps you.
Thanks and Regards,
Roopesh

Similar Messages

PDS Creation with Object Dependency

Hello Gurus,
I´ve written a function to run BAPI_PDSSRVAPS_SAVEMULTI in order to create PDS with object dependency (Super BOM). The PDS created by my function looks good in CURTO_SIMU, but it is not respecting the characteristic dependency during PPDS Heuristic. If I take a PDS generated in ECC with the exact same attributes, the heuristics explodes the components correctly. When I run the getlist bapi, it shows both ECC created and function created with all tables (pds_header, pds_component,) filled with the same content. Though, one PDS works and the other doesnt. I am clueless.
thank you a lot.
Cheers
Rafael

Mainly due locking issues. Added some logic to wait.

CRM Business Object BUS1006005 Not Showing In LSMW Object List

I am trying to use Bus. Object BUS1006005 in an LSMW using BAPI. I noticed that I need to generate an ALE interface for the object before LSMW can use it.. Can someone please help me with this? When I drop-down on Business Object in LSMW Attributes, this object does not show on the list, however I noticed that Bus. Objects with ALE Message Types do show up.
Kind Regards,
Jason

IDOC Type:It is the Structure and format of the data that is to be exchanged
see the EDBAS table
MESSAGE TYPE: Determines and Processes the various outputs associated with an application document . Mostly used in SD and MM modules
See the EDMSG table
see the link for LSMW-IDOC
http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
LSMW-BAPI
Step-by-Step Guide for using BAPI in LSMW
Note! The screen prints in this article are from ECC 5.0. They may differ slightly in other versions.
Introduction:
This document details the usage of BAPI in LSMW. We have used the example of migration of the purchase order data into SAP.
Pre-requisites:
It is assumed that the reader of this article has the minimum knowledge required on the Business Object, BAPI, Message Types and IDoc Types.
Step-by-Step Procedure:
Details of the BAPI used in this scenario:
Business Object: BUS2012
Method: CreateFromData
Details of Message Type and Basic IDoc Type:
Message Type: PORDCR
Basic IDoc Type: PORDCR02
Lets have a look at the BAPI first, before proceeding to the LSMW:
1. Go to Transaction BAPI
2. Click on Search Button
3. Enter the value BUS2012 and select Obj.type(Technical Object Name
4. Press ENTER
5. Following screen appears:
6. On the left side of the screen, Expand the PurchaseOrder.
7. Select PurchaseOrder and double-click on the same for details.
Building LSMW using BAPI:
1. Go to Transaction LSMW.
2. Enter the Project, Subproject and Object information and click on CREATE.
3. Enter the descriptions for Project, Subproject and Object.
4. Now select Settings à IDoc Inbound Processing
5. IDoc Inbound Processing screen appears. Enter the required details as shown below:
6. Click on Activate IDoc Inbound Processing.
7. Click on Yes when prompted for Activate IDoc Inbound?
8. Hit on Back to return to the main screen.
9. Click on Continue (F8). Following Screen appears:
10. Select the Step 1 Maintain Object Attributes and select Execute.
11. Select the radio button Business Object Method and enter the following details:
Business Object: BUS2012
Method: CreateFromData
Hit ENTER
12. Save and click on BACK button. Following information message is displayed.
13. Now select step 2 Maintain Source Structures and click Execute.
14. In this step, we need to maintain the source structure. In our example, lets consider the example of a file with 2 structures Head and Item data as shown below:
Click on Create and name the source structure as HEADERDATA. Now select HEADERDATA and click on Create again to create the child structure. Following popup appears:
Select Lower Level and click on Continue. Enter the Item data structure name.
Click Save and hit BACK button to go to the main screen.
15. Select step 3 Maintain Source Fields and hit execute.
16. Enter the fields as shown below:
17. Click SAVE and return to main screen.
18. Select step 4 Maintain Structure Relations and click Execute.
Select E1PORDCR and click on CREATE RelationShip. Following screen appears:
Select HEADERDATA and hit ENTER
Similarly do the same for the structure E1BPEKKOA, E1BPEKPOC and E1BPPEKET.
Click Save and return to main screen.
19. Select the step Maintain Field Mapping and Conversion Rules and click on execute. Maintain the Field Mapping as seen below:
20. Select step 7 Maintain Source Files and provide the link for the test file created. (Create a test file with the same structure as defined earlier).
Save and return to main screen.
21. Select the step Assign Files and click on Execute.
Assign the file provided to the source structure. Here the same file is provided for both the structures.
Save and return to the main screen.
22. Select the step Read Data and click on Execute.
Click on Execute.
Return to the main screen.
23. Select the step Display read data and click on execute.
Click on the structure name to get the field level values.
24. Return to main screen and now select Convert Data.
25. Return to the main screen and select Display Converted data.
26. Return to main screen and select Start IDoc generation.
27. Now select the step Start IDoc Processing on the main screen.
28. Return to main screen and click on Create IDoc overview. Here the data record and status records of the IDoc could be viewed
It is given in screen shot.
http://www.****************
LSMW-IDOC
see this and do accordingly
http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
Go through the steps
Hi please go through the following steps for IDOC method
Step 1. Run the transaction ( /nlsmw ) you will reach to the screen
Here you have to specify
Project : 060_BUS_TRANS
Subproject : SERVICE_TICKET
Object : SRV_TICKET_ZSVT
click on the execute button .you will reach the screen :
The screen shows the 15 steps to Run the lsmw
Step 2) select the first step ( Maintain object attributes) and click the execute button.After clicking on the execute button you will reach at. the screen
Here you have to specify ( MEssage type and basic type)
click on the BACK button
Step 3) select the 2nd step ( Maintain source structures) and click the execute button
Here you have to specify the source structures.
Step 4) Select the 3rd step ( Maintain source fields) and click on the execute button :
Here you have to specify the fields present in the source structure
Step 5) select the 4th step ( Maintain structure relationship ) and click on the execute button :
Here you have to specify relationship between source and target structures
Step 6) select the 5th step ( Maintain field mapping ) and click on the exécute button :
Here you have to map the fields between source and target structure. Also you have to apply conversion rules here if any
STEP 7) select the 6th step and click on the exécute button
Here you can define any fixed value or user define routines
Step 8) select the 7th step ( Specify files) and click on the exécute button :
At This screen we have to specify the files for This we should be in change mode .So please click on the button shown in the above screen. After clicking on This button you will be in change mode and will be able to specify the files :
Step 9) select the 8th step ( Assign files) and click on the exécute button
For assigning files yoy should be in change mode do the same thing click on the button as shown in the above screen :
Then assign the files to different structures.
Step 10 ) select the 9th step ( Read Data) and click on the exécute button :
After clicking on the exécute button you will reach to the screen
Again click on the exécute button . After clicking on the exécute button you will reach to the next screen
Here you will see data is read.
Step 11) select the 10th step ( Display read data) and click on the exécute button :
Here you can see your test data present in test files assign to source sturcture
Step 12 ) select the 11th step ( Convert data) and click on the exécute button :
After clicking on the exécute button you will reach to the screen
Click on the exécute button as shown on the : After click on the exécute button you will reach to the next screen
Data is converted
Step 12th ( Display converted data is same as Display read data )
Step 13 ) select the 13th step ( Start idoc generation) and click on the exécute
button :
At this step Idoc is generated using converted data
Step 14) select the 14th step ( Start idoc processing ) and click on the exécute button :
After clicking on the exécute button you will reach to the screen :
And then click on the exécute button : After clicking on the exécute button you will reach to the final processive screen
If data is processed correctly you will see ( 53 Status message with green sign)
http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI.ppt
Step-by-Step Guide for using BAPI in LSMW
Note! The screen prints in this article are from ECC 5.0. They may differ slightly in other versions.
Introduction:
This document details the usage of BAPI in LSMW. We have used the example of migration of the purchase order data into SAP.
Pre-requisites:
It is assumed that the reader of this article has the minimum knowledge required on the Business Object, BAPI, Message Types and IDoc Types.
Step-by-Step Procedure:
Details of the BAPI used in this scenario:
Business Object: BUS2012
Method: CreateFromData
Details of Message Type and Basic IDoc Type:
Message Type: PORDCR
Basic IDoc Type: PORDCR02
Lets have a look at the BAPI first, before proceeding to the LSMW:
1. Go to Transaction BAPI
2. Click on Search Button
3. Enter the value BUS2012 and select Obj.type(Technical Object Name
4. Press ENTER
5. Following screen appears:
6. On the left side of the screen, Expand the PurchaseOrder.
7. Select PurchaseOrder and double-click on the same for details.
Building LSMW using BAPI:
1. Go to Transaction LSMW.
2. Enter the Project, Subproject and Object information and click on CREATE.
3. Enter the descriptions for Project, Subproject and Object as prompted.
4. Now select Settings à IDoc Inbound Processing
5. IDoc Inbound Processing screen appears. Enter the required details as shown below:
6. Click on Activate IDoc Inbound Processing.
7. Click on Yes when prompted for Activate IDoc Inbound?
8. Hit on Back to return to the main screen.
9. Click on Continue (F8). Following Screen appears:
10. Select the Step 1 Maintain Object Attributes and select Execute.
11. Select the radio button Business Object Method and enter the following details:
Business Object: BUS2012
Method: CreateFromData
Hit ENTER
12. Save and click on BACK button. Following information message is displayed.
13. Now select step 2 Maintain Source Structures and click Execute.
14. In this step, we need to maintain the source structure. In our example, lets consider the example of a file with 2 structures Head and Item data as shown below:
Click on Create and name the source structure as HEADERDATA. Now select HEADERDATA and click on Create again to create the child structure. Following popup appears:
Select Lower Level and click on Continue. Enter the Item data structure name.
Click Save and hit BACK button to go to the main screen.
15. Select step 3 Maintain Source Fields and hit execute.
16. Enter the fields as shown below:
17. Click SAVE and return to main screen.
18. Select step 4 Maintain Structure Relations and click Execute.
Select E1PORDCR and click on CREATE RelationShip. Following screen appears:
Select HEADERDATA and hit ENTER
Similarly do the same for the structure E1BPEKKOA, E1BPEKPOC and E1BPPEKET.
Click Save and return to main screen.
19. Select the step Maintain Field Mapping and Conversion Rules and click on execute. Maintain the Field Mapping as seen below:
20. Select step 7 Maintain Source Files and provide the link for the test file created. (Create a test file with the same structure as defined earlier).
Save and return to main screen.
21. Select the step Assign Files and click on Execute.
Assign the file provided to the source structure. Here the same file is provided for both the structures.
Save and return to the main screen.
22. Select the step Read Data and click on Execute.
Click on Execute.
Return to the main screen.
23. Select the step Display read data and click on execute.
Click on the structure name to get the field level values.
24. Return to main screen and now select Convert Data.
25. Return to the main screen and select Display Converted data.
26. Return to main screen and select Start IDoc generation.
27. Now select the step Start IDoc Processing on the main screen.
28. Return to main screen and click on Create IDoc overview. Here the data record and status records of the IDoc could be viewed:
Please Go through these Links ,
BAPI with LSMW
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI
For document on using BAPI with LSMW, I suggest you to visit:
http://www.****************/Tutorials/LSMW/BAPIinLSMW/BL1.htm
http://myweb.dal.ca/hchinni/sap/lsmw_home.htm
http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf
bapi-idoc:
http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
Thanks
Naveen khan

DNG files created with LR4 do not show thumbnails

Hi,
When using LR3 to create DNG files from my RAW files, those files would show me thumbnails of my image in Windows Explorer. I am running Windows/7 (64) and have installed a CODEC from "Fast Picture Viewer" that allows thumbnails from RAW & DNG files to be shown. It seems, however, that the thumbnails do not show for DNG's created with LR4.
To Remedy this I uninstalled the CODEC. Downloaded the most recent version and installed it but this did not fix the problem.
I then went to the user forum for the CODEC product and searched for my problem. I found a thread who's solution is to turn off "Embed Fast Load Data" when exporting to DNG and it fixes the problem. I tried this and indeed it did fix it. The responder went on to say ".....When this option is enabled the files created are no longer DNGs (just an undocumented private format of Adobe that no one else can read to this date)". This statement surprised me as it is counter to what I understand Adobe created DNG to be. Can I get some input on this comment as if true it is very troubling.
My second question is that I see where to turn off the "Embed Fast Load Data" in the LR Export module, but where do I do the same thing in the Import module when I'm selecting import mode "Copy to DNG"?
And, my thrid question is this. If indeed the DNG files created by LR4 are proper DNG files and this CODEC is just flawed in some way, does anyone have a better way to allow image thumbnails to be shown in Windows Explorer?
Thanks -- Dan

Hi David,
You testing does not coincide with mine. I have consistently kept "Use
lossy compression" turned off. With lossy turned off, it seems that using
Fast Data Load prevents the thumbnails from displaying whereas turning off
"Fast Data Load" allows the thumbnail to be shown.
Below is comment from Adobe confirming that they have yet to release the
spec containing "Fast Data Load".
From: Ian Lyons [email protected]
Sent: Tuesday, June 05, 2012 12:29 AM
To: Califdan
Subject: DNG files created with LR4 do not show
thumbnails
Re: DNG files created with LR4 do not show thumbnails
created by Ian Lyons in Photoshop Lightroom - View the full discussion

What would cause images with captions to not show up?

Still struggling with this issue. Images with captions are not showing up on the iPad preview.
Please help!
Thx!

Hi Andrew,
I have been struggling with this for days. I am working on it with Apple. We re-installed the software, I re-installed OSLion, I re-started in safe mode, looked at startup items, cache, etc.
Now I am about to create a partition and test again to determine if the issue is with another software program on my system.
BTW, I noticed this starting AFTER I upgraded to 1.1, but maybe that is a coincidence. Do you know if it started for you after the update? ALSO, check your help screen in IBA. Does it look the attached? This started happening at the same time as the caption/image issue.
Please stay in touch as you the first person other than myself (that I know about), who is having this issue.
I look forward to hearing if you have the Heklp issue.
THANKS!
Belinda

TS3276 Does anyone have problems with sent messages not showing in their Mail? I have two sent folders when really I only want one. Any tips?

Does anyone have problems with sent messages not showing in their Mail? I have two sent folders when really I only want one. Any tips?

Not sure if this is a fix, but I tried sending myself a test email from only the Bcc field, and lo and behold it now shows the Bcc field in all sent item previews;
...maybe leaving the 'To' field blank on purpose forced Mail to show it.
Rebooted the Mail program, still there - rebooted the machine, still there. Hope this is still relevant and it works for you too - J.

SQL 2012 install fails with 'Object reference not set to an instance of an object" On windows 8.1 Hyper-V

Hi All,
Could you please help me here? On my Laptop which is running on windows 8.1 Operation system, I enabled the Hyper-V client feature and setup the Windows Fail-over Clustering using Windows 2012 Standard Edition. So, there are three machines which are running
on the Hyper-V. Below are the machine details;
1st machine - Working as Domain controller and its name is "ACONDomainGroup" and allocated to
1GB RAM to use.
2nd machine - Working as Node1 and its name is "AconNODE1W2K12STD"
and allocated to 2.5GB RAM to use.
3rd machine - Working as Node1 and its name is "AconNODE1W2K12STD"
and allocated to 1.5GB RAM to use.
and the windows virtual cluster name is "AconWinCLTR". While I am doing the SQL Cluster Installation, I am getting below mentioned error. all systems have 4.5 .net installed. May you please guide me where and what i am missing to complete sql clustering.....
Update Source: MU
User Input Settings:
ACTION: InstallFailoverCluster
AGTDOMAINGROUP: <empty>
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
ENU: true
ERRORREPORTING: false
FAILOVERCLUSTERDISKS: <empty>
FAILOVERCLUSTERGROUP:
FAILOVERCLUSTERIPADDRESSES: <empty>
FAILOVERCLUSTERNETWORKNAME: <empty>
FEATURES:
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL
Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft
SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network
Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
PID: *****
QUIET: false
QUIETSIMPLE: false
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup
Bootstrap\Log\20140420_052344\ConfigurationFile.ini
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup
Bootstrap\Log\20140420_052344\SystemConfigurationCheck_Report.htm
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: System.NullReferenceException
Message:
Object reference not set to an instance of an object.
HResult : 0x80004003
Data:
HelpLink.EvtType = 0x9AF1AE5E@0x44A889F9
DisableWatson = true
Stack:
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.ShouldRuleRun(Rule
rule)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.IsRuleSkipped(Rule
rule)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.LoadRule(String
ruleId, List`1 ruleProperties, XmlSchema ruleSchema, XmlElementParserFactory elementParser)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.LoadRules(IEnumerable`1
ruleIds)
at Microsoft.SqlServer.Configuration.InstallWizard.RunRuleProgressController.Initialize()

Dharmendra, the log details are incomplete are not sufficient enough for I guess anyone to help. Besides, from the details above, I can see that the Failover Cluster Disks are not selected:-
FAILOVERCLUSTERDISKS: <empty>
FAILOVERCLUSTERGROUP:
FAILOVERCLUSTERIPADDRESSES: <empty>
FAILOVERCLUSTERNETWORKNAME: <empty>
Please mark the answer as helpful if i have answered your query. Thanks and Regards, Kartar Rana

IDM 8.1 with firefox does not show all GUI items

Hi,
we are running IDM 8.1 Patch_5 on Solaris 10. We have 2 instances, Prod & UAT. UAT runs from Tomcat 5, Prod uses Sun Appserver 8.
But our problem seems to be the Web Client.
When We lookup a user and then open the tabs for them, for example "Security" Firefox is not showing the
little boxes that allow you to allocate attributes etc. Instead, we just get the form title and then a blank line.
I did some reading and noted that there were some Java issues with IDM and Java and Firefox but I cannot apply
the workaround. I also tried the edit of Waveset.properties and adjusting the baseHref as suggested elsewhere but this
also does not work.
We are using Firefox Mozilla/5.0 (X11; U; SunOS sun4u; en-US; rv:1.9.2.6) Gecko/20100627 Firefox/3.6.6
As you can see this is a SPARC desktop!
Also Java was tried with v1.5_16 and now currently jdk1.6.0_07.
Can anyone please assist? This is rather urgent. I will be trying my Mac at home tonight, but we need something
that works now! Interestingly, this is the first time I have seen this problem. It may be related to Firefox, but I tried using Opera as well
with the same result.
Please assist!

Hi,
thanks for the information. I doubt we will be modifying the base code of IDM in this way. I am a bit disappointed that a
Sun product, running on a Sun desktop has this issue, but I think it more of a synergy between Java and Firefox, although
Opera was basically broken the same way, too.
Our workaround for now, is to have a separate install of Firefox, which is 3.0.3 and Java 1.5.0_16, which we know work
and run this as a parallel browser, with a symlink to it as "firefox-idm". This is OK, but not really that good.
Interestingly, IDM 8.1 displays perfectly on Snow Leopard and G5 Leopard using Firefox 3.6.6 and Java 1.6 on
Snow Leopard and with Java 1.5 on the G5 release.
We are thinking of apply IDM patches, but are reticent to do so, if they break any existing functionality......
Cheers
rachel
Edited by: virag064 on Aug 19, 2010 6:04 PM

SQL 2012 install fails with 'Object reference not set to an instance of an object.'

Hi, I'm trying to install SQL 2012 RTM Enterprise on a Windows 2008 R2 single node cluster.
The installer starts goes through some checks and then fails with the message 'Object reference not set to an instance of an object.' It happens while the small 'wait while...' dialog box is
showing, another window pops up briefly (I think the feature selection window - can't really tell as it doesn't draw before disappearing). Then the ‘Object reference not set’ message comes up.
From the summary log file..
Overall summary:
Final result:
Failed: see details below
Exit code (Decimal):
-2147467261
Exit facility code:
0
Exit error code:
16387
Exit message:
Object reference not set to an instance of an object.
Start time:
2012-09-26 08:52:53
End time:
2012-09-26 08:54:08
Requested action:
InstallFailoverCluster
Exception help link:
http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0x9AF1AE5E%400x44A889F9&EvtType=0x9AF1AE5E%400x44A889F9
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: System.NullReferenceException
Message:
Object reference not set to an instance of an object.
Data:
HelpLink.EvtType = 0x9AF1AE5E@0x44A889F9
DisableWatson = true
Stack:
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.ShouldRuleRun(Rule rule)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.IsRuleSkipped(Rule rule)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.LoadRule(String ruleId, List`1 ruleProperties, XmlSchema ruleSchema, XmlElementParserFactory elementParser)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.LoadRules(IEnumerable`1 ruleIds)
at Microsoft.SqlServer.Configuration.InstallWizard.RunRuleProgressController.Initialize()
I have rebooted, tried different media, tried uninstalling the setup files and rerunning but always get the same result.
Any help would be gratefully accepted.
Thanks,
Bruce.

Hi Alberto,
Whenever I am trying to install SQL 2012 with SP1 clustering, I am getting below error. Can you please advise on this.
Additional information are
Windows Servers Version and Edition - Windows 2012 Strandedition
SQL Server Version and Edition - SQL 2012 with SP1
All the machines are running on Hyper-V and Passed the cluster validation test successfully. there is no issue. The servers' (Nodes) names are;
DomainServerName - ACONDomainGroup (1gb ram allocated)
Node1 - AconNODE1W2K12STD (2.5gb ram allocated )
Node2 - AconNODE2W2K12STD (1.5 ram allocated allocated)
WindowsClusterName - AconWinCLTR
Below is Summary.txt Error
Update Source: MU
User Input Settings:
ACTION: InstallFailoverCluster
AGTDOMAINGROUP: <empty>
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
ENU: true
ERRORREPORTING: false
FAILOVERCLUSTERDISKS: <empty>
FAILOVERCLUSTERGROUP:
FAILOVERCLUSTERIPADDRESSES: <empty>
FAILOVERCLUSTERNETWORKNAME: <empty>
FEATURES:
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
PID: *****
QUIET: false
QUIETSIMPLE: false
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140420_052344\ConfigurationFile.ini
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140420_052344\SystemConfigurationCheck_Report.htm
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: System.NullReferenceException
Message:
Object reference not set to an instance of an object.
HResult : 0x80004003
Data:
HelpLink.EvtType = 0x9AF1AE5E@0x44A889F9
DisableWatson = true
Stack:
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.ShouldRuleRun(Rule rule)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.IsRuleSkipped(Rule rule)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.LoadRule(String ruleId, List`1 ruleProperties, XmlSchema ruleSchema, XmlElementParserFactory elementParser)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.LoadRules(IEnumerable`1 ruleIds)
at Microsoft.SqlServer.Configuration.InstallWizard.RunRuleProgressController.Initialize()

Activating objects but not showing up in Cache Status Overview

Hello SDN.
We are on PI 7.1. A strange thing started happening. I can change an object and when activate, I get success, but in checking the Cache Status Overview it does not show up. We set up our SLD as follows
SC_Systems (i.e. SAP, Outside Vendors etc) (all service interfaces and actions go here)
Which is the parent of SC_Mapping (all operation and message mappings)
Which is the parent of SC_Models (all DataTypes, ED, and Message Types go here)
So
SC_SYstems
SC_Mappings
SC_Models
When making a change to the models SC and activate we get the following problem above, also for SC_Systems. But when I do this for mapping there is no issue.
One thing that is different is a new developer accessed the DataType from the SC_Systems and changed it, thus causing a conflict (We usually access and change DT, MT etc in SC_Models.
Since then it seems both are not allowing activation even though it says successful.
We have bounced the system, done all cache refreshes that I can think of and are about to go back 3 days to a backup store point, but want to see if anyone has any idea what the problem could be.
Thanks in advance
Cheers
Devlin

Hi,
It may be too obvious, but have you checked the Change Activation List?
Perhaps the objects that were edited are "pending" there.
Clear the SLD cache later.
Regards,
Caio Cagnani

Enhanced SAP class with new methods - Not showing these from standard task

Dear Gurus,
I have enhanced SAP standard class with new methods. After I have activated my new methods and would like to create a workflow task using these new methods. when I create a task and input object category as "ABAP Class" and object type is SAP enhanced class. When I try to drop down for methods SAP is not showing my new methods. I do not know why. Am I missing any? Any help would be appreciated.
Note: Remember I am trying to use SAP ABAP class custom methods.
Thanks,
GSM

Hi,
Your thread has had no response since it's creation over
2 weeks ago, therefore, I recommend that you either:
- Rephrase the question.
- Provide additional Information to prompt a response.
- Close the thread if the answer is already known.
Thank you for your compliance in this regard.
Kind regards,
Siobhan

Problem with Css styles not showing in live view or when i browse

I am using Mac osx 10.6 and building website with Dreamweaver CS5. Sometimes div tags i create not showing styles or rendering in live view or when I browse but showing in design view. I looked in dreamwever faq and they talk about not showing in design view to toggle the display styles. That is not the problem becuase it is check marked and I tried turning off and turning on and made no difference.I am using firefox browser.
It happened before the other day too. But all of my other pages in this site that i have created the same way building with div tags and css styles. So not sure what the problem is. Maybe someone has a suggestion here.
Johanna

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Portfolio</title>
<style type="text/css"></style>
<link href="css/jbstyles.css" rel="stylesheet" type="text/css" />
<style type="text/css"></style>
</head>
<body>
<div id="wrapper">
<div id="mainnav">
    <div id="navbar">
      <ul>
        <li><a href="index.html"><br />
        </a></li>
<li>
          <ul>
            <li><a href="index.html">          Home</a><a href="about.html">About</a></li>
            <li><a href="portfolio.html">Portfolio</a><a href="contact.html">Contact</a></li>
          </ul>
        </li>
      </ul>
</div>
    <div id="contentinside">
      <div id="navbar2">
        <ul>
          <li><a href="design.html">Design</a></li>
          <li><a href="multimedia.html">Multimedia</a></li>
          <li><a href="webdesign.html">Web Design</a></li>
        </ul>
      </div>
      <div id="mm1thumb">Content for id "mm1thumb" Goes Here</div>
      <div id="mm2thumb">Content for id "mm2thumb" Goes Here</div>
    </div>
    <img src="images/multimsidebar.gif" width="212" height="615" alt="mmsdbr" longdesc="http://multimsidebar" />
<div id="footer">
    <p> </p>
    <p>Johanna Bresnahan</p>
    <p>Web & Graphic Design - http://www.johannabresnahan.com</p>
    <p> email: [email protected] ....phone....857•991•5717<br />
</p>
</div>
</div>
</div>
</body>
</html>
Here is the html code above. not sure how to attach my file so get a visual. This is the first time I have used this forum.
Johanna

How do I fix a problem with .eps files not showing up properly in icon view

Actually my .eps files are not showing properly in any of the views but icon view is most important to me. I am using OSX.8.5 on a mac mini and mac book air. Almost all of my .eps files are conversions of .wmf files converted to .eps by WMF Converter software. All of these files used to be on a PC running windows Vista using ST Thumbnails explorer to be able to view thumbnails. For background info: I had to use a program to view the WMF files becasue hackers could put viruses into the thumbnail for WMF fies so instead of fixing the problem Microsoft disabled the thumbnail view for all WMF files.
A few of my .eps files are conversions of files created in CorelDraw 3x and converted to .eps in CorelDraw 3x. Both types of .eps files misbehave the same.
I downloaded one .eps file today from the internet to see if it would misbehave the same way (it does).
Here is the problem: After a reboot when I first view a folder that contains .eps files in icon view I can see the file contents fine. If I use the resize slider at the bottom of the window or resize the window itself then some or all of my .eps files revert to displaying the "generic icon" of a Loupe with a picture behind it. If i can manage to put the resize slider to exactly where it was then my icons display the file contents as they did before I messed with the slider. There seems to be no rhyme or reason as to when an icon will display as the file contents or when the generic icon comes up. In some folders all the icons display correctly at the smallest icon size and in other folders the icons may display correctly or as only generic or a mix of generic and file contents. Icons to files that came from the same source will not necessarily display the same way. Icons to files that came from the same source and were converted by WMF Converter at the same minute do not necessarily display the same way. If I display "info" for the files sometimes the previev pane of the info box will display the generic icon or sometimes it will show the file contents. If I take an .eps icon that displays properly and drop it into a folder where all .eps icons are displayed as generic then that icon displays generic. When I move that same icon out of that folder then it will display properly. Icon view, list view, column view and cover flow view all display differently with no discernable pattern. Sometimes I can see file contents in column view and not icon view. Sometimes in cover flow and not in icon view. It makes no difference if I have a handful of .eps files in a folder or hundereds of files in a folder. After an undetermined amount of time the icons might display properly again or maybe not.
What I have done so far: exhaustive search of the internet did not find anyone else with the same issue. I checked and fixed all disk permission errors that disk utilities would fix. I know that icon view and quick look are two different things, but, I did however, download and install an eps quicklook plugin that did not seem to make a difference for my issue. BTW Quick look sometimes works and sometimes not (no discernable pattern to this behavior either). I tried the cnet download fix for quicklook just for grins. It had me force QL to reload plugins and it's cache then I cleared out the QL configuration files. This did not seem to make a difference in the behavior of icon view or Quicklook. The only two things I have found to be consistant are 1) The "open with preview" always works but I know this is different because this preview actually generates a pdf view of the file. 2) When the icon does display the file contents it always displays correctly.
When you read this please be mindful of: I am a Microsoft refugee not yet familiar with the Apple world so you may have to tell me how to do "simple" things. I have no idea what is the difference between a "thumbnail" or a "preview" or the behind the scenes way that apple generates the icon appearance for the 4 different views.
Any assistance would be greatly appreciated. I tried to insert a screen shot but got an error message when I did it.

Was the error number really 0XE8....
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

PDF document opened with Preview does not show french accents

Hi everybody,
I've got some issues with PDF documents opened with Preview.
They show a blank space for all the accented vowels.
If I open the same document with Safari, it's the same. But with Chrome, it works perfectly.
I assume there's a problem with fonts, but, nothing wrong with fontbook (checked duplicates for instance).
Last information : it looks ok within chrome on my Imac, but the issue comes back when I try to print from chrome app...the accents are gone on the sheet.
Any idea ? I don't want to install Adobe reader...
Thanks for your help !
http://www.art-shots.net/

I don't want to install Adobe reader...
Why not? It can handle some pdf's that Preview can't. At least it's worth a try.
In case you change you mind get it from here.

Duplicate files affixed with a "-1" not showing in search results

When I download files from the internet sometimes I get the same file twice and of course OS X affixes a "-1" to denote this, however when I search a folder (via the top right search tool) for any files containing "-1" in the file name (boolean) it does not show them, why is this?

If you try Easy Find and don't like it you can unistall it just by deleting the App.
It is one of the best Search programs I have used on either Mac or Windows.
You may also like to try Find Any File.
As to not using any 3rd party apps, well that is odd. Apple does not make all apps for all operations/needs. So at some point you will need to use an appplication written and sold by some other software company. So you don't use any Adobe software or any other software from other software companies?

Operations with object dependency not showing in CTM PDS

Similar Messages

Maybe you are looking for