BAPI or RFC function to delete a parked non-po document

Hello,
Does anybody know a BAPI or RFC function that can be used to delete a parked non-po (G/L) document? At the moment we delete those parked documents with batch input but we want that everything can run in the background with a RFC only user.
For parking we will use PRELIMINARY_POSTING_FB01 and for posting BAPI_ACC_DOCUMENT (method "post") but I cannot find anything that allows me to delete a parked invoice. (ECC 6.0)
Thanks for your help.
Patric

Hi,
Please go through the below OSS note 971193:-
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=971193
It provides a program for mass deletion of parked document.
You can run that program in background with batch user.
Regards,
Gaurav

Similar Messages

How to debug a RFC function when the user is non-dialog type? Please help!

hi Experts,
I am calling a RFC FM residing in B from R/3 system A.
R/3 A -
Call FM residing in B----
> R/3 B
The user attached to the remote destination is a non-dialog type.
I cannot change the user type of this user.
Therefore how to debug the RFC FM in System A?
Are there any alternatives?
Please help
Thanks
Gopal

in your RFC FM, code an endlees loop.
something like:
data: gv_x type xfeld value 'X'.
do.
if gv_x = space.
exit.
endif.
enddo.
now you can catch the mode in TA SM50, go in it, change gv_x to space and debug what is coming further.

Problem in the creation of rfc function module

hi,
I am creating one rfc function module comparing to standard non-rfc function module. In that one i have one export parameter with the standard strcture type. but this stcture component contains with strcture type. among all these components four fields are common. but when i am trying to activate function module it is giving message you cannot use internal tables, strings,references, or strctures as components. that function module name is BAL_FILTER_CREATE and that export parameter name is that export parameter name is E_S_LOG_FILTER that associated type is BAL_S_LFIL. how can i solve the problem. pls give me solution as soon as possible.

hi,
for rfc fm's u should enable the call by value check box which will appear on that of import and export parameters. tick that one for each parameter in rfc and activate.
if helpful reward some points.
with regards,
Suresh Aluri.

V Urgent : Debugging an RFC function Module in another R/3 system

Hi All
I have a function module in a R/3 system ( say WB1 ) and i am calling it from another R/3 system (say WD1) . Both have their RFC destinations set up as trusted system mutually . However when i try to debug that FM while in WD1 ( which basically exists only in WB1) i am not able to get inside that FM . Are there some settings that we need to do to allow us to debug function module in another R/3 system ? .
Yes ,we cant do this debugging if RFC function module is in a non SAP system but am sure it can be done atleast for R/3 to R/3 .
Any pointers to this as to what setting needs to done ?
Does some system parameter needs to be set in RSPARAM program for debugging RFC?
Please help
Regards
Shovit

Hi
Can you do a remote logon through the SM59 connection (the trusted one)?
If so, then the only thing preventing you would be debugging autorization.
If not, make sure you have trusted system logon auth (not part of SAP_ALL!).
Cheers
Dom

Posting Parked vendor invoice document

Hi Experts,
I have company code (ausbk), document number (belnr), fiscal year (gjahr ), using these parameters I need to post the parked vendor invoice document.
Please suggest how to write code or function module for posting parked vendor invoice document.
Thanks & Regards,
Sridhar

Hi,
You can post a parked document with T.code FBV0
& MR44 can be used to post a parked document
If useful, assign points.
regardrs
Sunil
Edited by: Sunil Goyal on Jun 4, 2008 11:28 AM

Third party system call function module/BAPI through RFC to update Z table

Dear Friends,
We have a third party system which directly inserts a Z table in SAP through its programming, which is an auditing issue.
We want the third party system should call function module/BAPI through RFC so that the Z table gets updated.
waiting for inputs..
Thanks,
Kumar

if third party system is capable of making Remote Function call, then writing a Function module & making it remote enable is not difficult task in ABAP.
You may have to prepare specifications first to decide if third party system is going to Read, insert, update, delete records from Zee table.

Is it possible to call custom designed RFC function module, apart from BAPI

Hi Friends,
1. Is it possible to call custom designed RFC function module, apart from BAPI.
2. Why we call it Adaptive RFC layer, Since every time the JCO layer updated with SAP, Why cant be dynamic.
Thanx for Ur time.
Cheers,
Sam

Also check <a href="http://help.sap.com/saphelp_nw04/helpdata/en/41/38bc8f813719488ddc9d9b21251ec3/frameset.htm">here</a> for more information on aRFC. Here you can find why it is called adaptive.
Regards,
Christophe

Regarding functions to delete items of FI parking document.

Hi all:
I searched in google and SDN but in vain for functions to delete items of FI parking document. could you please give one to me ?
or is there a function can delete or modify FI parking document?
thank you very much
Edited by: jingying Sony on Jun 2, 2010 6:54 AM
Edited by: jingying Sony on Jun 2, 2010 6:57 AM

Hi,
Try some of below Function Modules.
FI_DOCUMENT_LIST_DISPLAY
FI_DOCUMENT_CROSS_COMP_DISPLAY
FI_DOCUMENT_DISPLAY_RFC
FI_FM_DOC_DISPLAY ,
FI_ITEMS_DISPLAY
KR Jaideep,

Exist RFC Function or Bapi for insert Records form a external program?

i create a Ztable same as tell me here:
http://abaplovers.blogspot.com/2008/02/creating-table-in-sap.html
5 String Fileds 2 Date Fields 2 Numeric Fields
my question is exist a RFC Function or Bapi for insert Records form a external program (Delphi/Visual Basic)?
Any advices?
Thanks.

hi madhurao123 thanks for answer.
But Why block the Thread?
This question is no so basic, yet never learn, the forum must be open to these questions maybe open a forum somewhere basic but must be able to do these basic questions.
IT Toolbox commented the same thing, but if not here or ITtoolbox or where else can ask basic questions?
Advise me, thank you.

Bapi or function to delete a connection objet (IL02)

Hi,
I need a bapi or function to delete a connection object.
In other words, I need to have my program work as if I set the deletion flag for a connection object from TCODE=IL02. It doesnt really delete the connobj but deactivates it somehow.
Anybody have a clue what to use?

Hello Berk,
Did you find a bapi or function to delete a connection object?
Kind Regards
Saima

Migrating BAPI & RFC function modules into web services

What is the advantage of migrating BAPI & RFC function modules into web services?

Hi.
That's a very good question. Why did you ask it, are you considering doing so?
I wouldn't think there would be any performance advantages using WebServices.
You could make your BAPI's available for other systems than Web Dynpro or SAP systems by turning them into WebServices.
That could be an issue when you want to use different integration engines perhaps.
A WebService might also be better for dealing with large number of requests I guess.
When dealing with XML you can also use the advantage of XSLT for validating your data.
The main advantages would still be the availability of your service for non-SAP systems.
/Mikael

Update Parked Non PO invoice - FBV2 functionality via BAPI or FM not BDC

Good day all,
after searching many days, I have found many threads similar to this request but none have been properly answers. My scenario: I need to change a header field (ZUONR) and account assignment related fields (KOSTL, AUFNR, etc) in the document items.
I have tried many FM for this but can't seem to overcome the fact that parked, non-po invoices have no entry in the BSEG table. I have progressed a long ways with the BAPI
PP_CHANGE_DOCUMENT_FBV2_ENJ
But I get an error message:
No item information transferred into Accounting
Message no. RW002
Diagnosis
The interface into Accounting requires:
Header data
Item data
Currency data
The item data is missing.
System Response
Processing of the data in the Accounting interface is not possible.
Procedure
This is a system error of the application which was called up.
This message seems to derive from a missing set of field what should be coming from the FM
AC_DOCUMENT_CREATE
I can't seem to debug there the internal table T_ACCIT should be getting it's values
Please help troubleshoot this.
Cheers
M

SG- Thank you for the reply.
I have been playing with BAPI_INCOMINGINVOICE_PARK and I'm not sure if it is doing exactly what we want, but it is something that I have considered in the past. I plan on looking into BAPI_ACC_INVOICE_RECEIPT_POST this morning, hopefully that will provide some more for us.
If possible I'd like to avoid BDC sessions because this program could hypothetically interface with multiple SAP systems with different configurations.
I will check into those FM's and thank you very much.

RFC FUNCTION/BAPI for derived Roles (PFCG)

Hi all,
I have found many RFC functions for Users and Roles management but nothing for create derived roles.
Any idea for creating derived roles from external applications ?
Thanks
Andrea

Hi Andrea,
check the link below.
automate update profiles by abap (without PFCG)
Re: automate update profiles by abap (without PFCG) ?
Also check if this is helpful
BAPI_JOBROLE_CLONE
Regards,
SuryaD.

Get the return value of an RFC function / BAPI

Hello,
I'm a Web Dynpro Java beginner and I try to get the return value (domain: NUMC6) of an RFC function without success.
Here is what I do, could you please tell me what is wrong?
First, here is my context:
Context
|
|---- ZMy_Bapi
     |
     |---- MyOutputResult
     |     |
     |     |---- MyReturnValue
     |
     |---- MyInput
My model:
MyModel
|
|---- ZMy_Bapi_Input
     |
     |---- Output
     |     |
     |     |---- ZMy_Bapi_Output
     |          |
     |          |---- Return_Value
     |
     |---- Input_Value
The mapping between them:
- MyInput is mapped to Input_Value
- MyReturnValue is mapped to Return_Value
And my code:
ZMy_Bapi_Input bapiInput = new ZMy_Bapi_Input();
wdContext.nodeZMy_Bapi().bind(bapiInput);
bapiInput.setInput_Value("A value");
executeZMy_Bapi();
ZMy_Bapi_Output bapiOutput = new ZMy_Bapi_Output();
wdContext.nodeMyOutputResult().bind(bapiOutput);
IMyOutputResultElement outputElement = wdContext.nodeMyOutputResult().currentMyOutputResultElement();
String result = outputElement.getMyReturnValue();
Finally, here is the code of the executeZMy_Bapi() function:
try {
     wdContext.currentZMy_BapiElement().modelObject().execute();
     wdContext.nodeMyOutputResult().invalidate();
} catch (Exception ex) {
     ex.printStackTrace();
My problem is that "result" keeps being empty
Thanks in advance for your help!

It still doesn't work, I'm gonna turn crazy!
But there is one good point: I get the method you mentioned: getZMy_Bapi_OutputElementAt and getMyReturnValue without casting, just as you said first.
Here are the updated context, model, mapping and code.
Context:
MyContext
|
|---- ZMy_Bapi
     |
     |---- MyOutputResult
     |     |
     |     |---- ZMy_Bapi_Output
     |          |
     |          |---- MyReturnValue
     |
     |---- MyInput
Model:
MyModel
|
|---- ZMy_Bapi_Input
|     |
|     |---- Output
|     |     |
|     |     |---- ZMy_Bapi_Output
|     |          |
|     |          |---- Return_Value
|     |
|     |---- Input_Value
|
|
|---- ZMy_Bapi_Output
     |
     |---- Return_Value
Mapping
ZMy_Bapi     --> ZMy_Bapi_Input
MyOutputResult     --> Output
ZMy_Bapi_Output     --> ZMy_Bapi_Output
MyReturnValue     --> Return_Value
MyInput          --> Input_Value
Code
ZMy_Bapi_Input bapiInput = new ZMy_Bapi_Input();
wdContext.nodeZMy_Bapi().bind(bapiInput);
bapiInput.setInput_Value("A value");
executeZMy_Bapi();
ZMy_Bapi_Output bapiOutput = new ZMy_Bapi_Output();
wdContext.nodeMyOutputResult().bind(bapiOutput);
String result = "";
for (int i = 0; i < wdContext.nodeZMy_Bapi_Output().size(); i++) {
     IZMy_Bapi_OutputElement resultElem = wdContext.nodeZMy_Bapi_Output().getZMy_Bapi_OutputElementAt(i);
     if (resultElem.getMyReturnValue() != "" && resultElem.getMyReturnValue() != null) {
          result = resultElem.getMyReturnValue();
Edited by: Franis Pignon on Oct 17, 2008 11:16 PM

Difference between BAPI and RFC?

Difference between BAPI and RFC?
also where to use BAPI and where to use RFC?

Hi,
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA. in this case u only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
The following standardized BAPIs are provided:
Reading instances of SAP business objects
GetList ( ) With the BAPI GetList you can select a range of object key values, for example, company codes and material numbers.
The BAPI GetList() is a class method.
GetDetail() With the BAPI GetDetail() the details of an instance of a business object type are retrieved and returned to the calling program. The instance is identified via its key. The BAPI GetDetail() is an instance method. BAPIs that can create, change or delete instances of a business object type
The following BAPIs of the same object type have to be programmed so that they can be called several times within one transaction. For example, if, after sales order 1 has been created, a second sales order 2 is created in the same transaction, the second BAPI call must not affect the consistency of the sales order 2. After completing the transaction with a COMMIT WORK, both the orders are saved consistently in the database.
Create( ) and CreateFromData! ( )
The BAPIs Create() and CreateFromData() create an instance of an SAP business object type, for example, a purchase order. These BAPIs are class methods.
Change( )
The BAPI Change() changes an existing instance of an SAP business object type, for example, a purchase order. The BAPI Change () is an instance method.
Delete( ) and Undelete( ) The BAPI Delete() deletes an instance of an SAP business object type from the database or sets a deletion flag.
The BAPI Undelete() removes a deletion flag. These BAPIs are instance methods.
Cancel ( ) Unlike the BAPI Delete(), the BAPI Cancel() cancels an instance of a business object type. The instance to be cancelled remains in the database and an additional instance is created and this is the one that is actually canceled. The Cancel() BAPI is an instance method.
Add<subobject> ( ) and Remove<subobject> ( ) The BAPI Add<subobject> adds a subobject to an existing object inst! ance and the BAPI and Remove<subobject> removes a subobject from an object instance. These BAPIs are instance methods.
Regards,
Prakash

BAPI or RFC function to delete a parked non-po document

Similar Messages

Maybe you are looking for