BAPI_PO_CHANGE ADD NEW POSITIONS WITH AGREEMENT REFERENCE ACCOUNT ASSIG. U

Hello, we are trying to add new positions to a MM orders
using "BAPI_PO_CHANGE". The positions take into account an agreement number as reference and executing it, the bapi overwrites the value of the account asingment and sets 'U' instead of blank which is the value set as parameter in the field POITEM-ACCTASSCAT and shows the error message ME069 unknown account assignment.
I tried to set in the bapi the value '*', for example, and the bapi returns correctly the message: This value doesn't exist as an account assingment category. I did this to confirm that the bapi substitutes the value set as parameter for the U value brought from the agreement. I need the same functionality but setting blank. I tried to create a blank entry as account assignment category but the bapi doesn't recogniced it.
I have tried to code in the next points:
Field exit KNTTP
Includes ZXM06U41, ZXFMYU03, zxmewu09 and ZXMEWU11.
In none of the mentioned cases we have changed the value 'U' for blank,
because the system always runs before the function MEX_PSTYP_KNTTP where makes the check and shows the error message ME069 unknown account assignment.
Thanks for your help.
Jose Luis.

Hi,
please check the note 420332.
If you want to add a new service line please use a dummy packno in the structures POITEM ,POSERVICES, POSRVACCESSVALUES. A dummy packno means that it does not have any entries in the tables ESLL and ESLH yet. The best solution would be to choose a packno which is a very low number which is not occupied in esll and eslh.
If you add a new service line please fill in first the father line into POSERVICES and add also the service line (2 entries), like it was described in note 420332, part 3.7
Regards,
Edit

Similar Messages

New iPad with the same account as older one

I will buy a new iPad mini for my son. Currently, I have iPad2 with several payed apps and games among other. I would like to keep new iPad with the same account and to transfer only games to new iPad. In that case I would like to be responsible for buying new apps for both iPads. Also, I would like to know could I backup two iPads to the same computer and same iTunes library?

As you said, Family Sharing would need iOS 8 on both iPads. You can go to the App Store and click on each app in your purchases, to check that each of your necessary apps are compatible with iOS 8, but the vast majority will be so that should not be too much of a concern. The easiest way for you to carry out this entire operation is through Family Sharing, once both iPads are on iOS 8, all you would have to do is go into the App Store from the new iPad and click "purchases" which will now show your name as a family member and allow access to all your previously purchased apps that allow family sharing, including the games. Again, in App Store you can check that each of the game apps allow Family Sharing, by touching on the icon of the app and scrolling to the details area it will say "Family Sharing: Yes/No". It will be free to download any previous purchases to the new iPad. To answer your other question, yes you can back up two iPads to the same iTunes Library, they have different serial numbers and are recognized as separate devices, for ease of use it is recommended to uncheck automatic syncing on the new device for music, photos, and more. See below excerpt from the Family Sharing link above for your options with Apple ID's depending on your sons age:
Kids under 13 can have an account, too.
Now kids under 13 can have their own Apple IDs. As a parent or legal guardian, the family organizer can create an Apple ID for a child and add the child to the family group automatically. Ask to Buy is turned on by default, and the organizer can also limit the content kids have access to on their devices through Restrictions on an iOS device or parental controls in OS X and iTunes.

New positions with BAPI_DELIVERYPROCESSING_EXEC

Hi, Masters.
I've got a VBELN from tables LIPS and I must create new positions (the current POSNR + 1) using BAPI_DELIVERYPROCESSING_EXEC.
What I can do for add a position with this BAPI?
I didn't find any example, using LIPS...
Thanks a lot.

Have you read the documentation? And what have you tried to do so far?

How can I sync my new iPad with my itunes account on my 4 yr old macbook? I plugged the iPad in once and all music synced. The 2nd time it said update needed. Mac says no update available.

How can I sync my new iPad with my itunes account on my 4 yr old macbook? I plugged the iPad in once and all music synced. The 2nd time it said update needed. Macbook says no update available.

" how can I sync my iphone to my mac book without losing all the music and pictures on it?"
You cannot. Copy everything you want form the old computer to the new one, then sync it.
it basically says you have to erase your iphone to sync to a new itunes!
Correct Iphone will sync, or manually manage, with one and only one computer/library at a time. Syncing, or manually managing, to another will indeed erase the current content.

I am unable to access my digital editions library on a new computer with my existing account, it shows that my library is empty?

I am unable to access my digital editions library on a new computer with my existing account, it shows that my library is empty? Can anyone offer a suggestion to fix this?

If you have given correct info about you ios 6.1.3 - all you need to do is delete account. You will be able to sign in with new one afterwards. Make sure you don't delete any info when you see those prompts.

Is it possible to add new columns with format "Text" once a table is linked to a form

Is it possible to add new columns with format "Text" once a table is linked to a form in Numbers for iPhone or is it impossible and thus a serious bug?(Rating stars and numeric vales seem to work.)
Those bugs happen both for new speadsheets as well as existing onces, like the demo. When you are in the form only the numeric keyboard shows up.
Pat from the Apple Store Rosenstrasse/Germany approved that it looks like a Bug during the Numbers Workshop I was in: It is not possible to add new columns with format "Text". I reported the error for Version 1.4 but there is no update nor do I get statement of understanding the issue.

Hi Knochenhort,
I see what you are talking about now. Without knowing how the program actually works, I think this is what's going on:
When you add a new column to an already existing table (with already existing formats), the new cells come already formatted like the previous column. So when you add a column to the end of the demo table, the cells are already formatted like stars, and when you add a column to the beginning, they're already formatted like number.
I think this is why it's different when if you add columns to a table with blank (unformatted) columns. In that case, the new cells aren't already "tainted" with a set format, so you can change to text format without issue.
It seems like the problem is that you can't format cells that are already formatted as "number" as "text" format (even if it doesn't look like they are, because they are blank). IMO, this is a bug! This is why you don't see this issue when adding columns to a new table, because the new cells don't already come with a format.
To workaround, you can highlight the body cells after adding the new column, and delete the cells. This will "clear" the formatting, so you can then go in the inspector, format them as text, and the correct keyboard will pop up.
Hope that helps!

Hey, I'm trying to authorize my new laptop with my iTunes account. How would I go about doing this?

Hey, I'm trying to authorize my new laptop with my iTunes account. How would I go about doing this?

Hi Michael1296,
Thanks for visiting Apple Support Communities.
Here are the steps to authorize a computer in iTunes:
How do I authorize a computer?
Open iTunes on the computer you want to authorize.
Choose Store > Authorize This Computer from the menu bar.
You might need to show the menu barto see this option in Windows. In earlier versions of iTunes, you can access this option from the Advanced menu.
Enter your Apple ID and click Authorize.
If your Apple ID uses an expired MobileMe account, you can still use it to authorize your computer.
If iTunes asks you to authorize your computer again, it won't use a new authorization. iTunes uses the same authorization for the same computer.
You can find these steps and more information at this link:
Authorize your computer using iTunes
All the best,
Jeremy

My daughter just synched her new iphone with her itunes account and it wiped out her contacts and pictures. Is there any way to recover them?

My daughter just synched her new iphone with her itunes account and it wiped out her contacts and pictures. Is there any way to recover them?

Sorry, unless she backup up the new phone before or is using iCloud to save the photos, the photos are gone.

In browser editing: Can my client add new images with hyper-links to their websites without having to replace images already there?

My client would like to be able to add new images to their site themselves and use them as hyper-links to external sites without having to replace an old image with the new one (or blank place holding images - far from ideal). Is there ANY way that this is possible? They do not wish to update and add new images/links regularly and it is certanly not intended to be used as a blog or way of being able to constantly keep content new and fresh otherwise I would set them up with a blog account and add that to the site. It is merely a way of adding links to other local businesses every once in a while.
Please see the page they wish to update... Friends. (Please excuse the layout... the customer will not be able to resize or edit the images themselves and wishes to add them as-is!)
Thanks in advance for any help. If anybody knows how I can ask an Adobe official mod, that would be great... that, or make a request for a future addition in an update?
Warm regards,
Ben Gathercole

Hi Andria,
Changing links is currently not possible with in-browser editing.
Please post this as a feature request in the following feedback form :
http://feedback.inbrowserediting.com/?url=
Regards,
Akshay

Add new report with a checkbox form

I’m trying to create a list with check boxes to add “contacts to a event”.
I have my table contacts and events, when I create a event I should invite my contacts. I want to create a list with all my contacts with a checkbox option and populate a new table with all the assistance.
I’m searching but I can’t find info.
I hope you have some time thank you
Rodrigo

You can create a checkbox in your list with APEX_ITEM.CHECKBOX. There are quite a few examples to be found when you google, e.g.
http://www.apex-blog.com/oracle-apex/adding-a-checkbox-to-your-report-apex_item-tutorial-30.html
One time I just created a default tabular form with DELETE functionality, so the checkboxes were already in place. I just created another process instead of the normal MRU process. Went pretty well actually.

To add new row with the checkbox selected ....

Hi All,
In my project I have to create a table with 2 columns, 1 column is checkbox and other column is String type. In the same JFrame one textarea and one add button should be there. When we type text in the textarea and click add button, it should add a new row in the table with the checkbox selected and the 2nd column containing the text.
I want to use AbstractTableModel.
Please help me to solve this issue. If you have sample code that will be more helpful.
Thank you,
Regards,
mkumar

It would be better if you extend from DefaultTableModel rather than from Abstract Table Model. That is because DefaultTableModel provides functionality to add a row. In fact, you can directly use DefaultTableModel .
In the button's action performed,
public void actionPerformed(ActionEvent e)
if(e.getSource() == bAdd)
    Vector newRow = new Vector(2);
    newRow.add(new Boolean(Boolean.TRUE));
    newRow.add(" ");
    DefaultTableModel dm = (DefaultTableModel)yourTable.getModel();
    dm.addRow(newRow);
}Note : For the above code, Initialize the JTable with a DefaultTableModel parameter than directly with Vectors/ Arrays.
This is because when we try to cast from TableModel to DefaultTableModel as in the above code, there is a possibility of an
Exception if the Table is not initialized without a model.
For the CheckBox in the first column, you need to set an editor and a renderer so that you can manipulate and see your boolean values as the state of the check boxes.
JCheckBox b = new JCheckBox();
DefaultTableCellRenderer dr = new DefaultTableCellRenderer(b);
DefaultTableCellEditor de = new DefaultTableCellEditor(b);
yourTable.getColumnModel().getColumn(0).setCellEditor(de);
yourTable.getColumnModel().getColumn(0).setCellRenderer(dr);That should do it !
Cheers

How do i associate my new mac with my itunes account?

I was trying to download a movie from icloud that I bought on itunes. it said that this device was not associated with my itunes account. how do I do that? I thought if I just logged into my account from this device it would do it.
Thank you

If the Mac is brand new you will need to authorize it, as well as sign into the store. In iTunes pull down Store > Authorize and enter your iTunes Store account AppleID credentials.

Add new field with Report ME80FN

I would like to Add Invoice number and order acknowlegment field with standreport ME80FN. How can I add these field with that report.pls any1 sugesst me ?
Thanks in advance

This report is a query on logical database MEPOLDB, why don't you build your own query ?
Regards,
Raymond

Failed on Java CI add-in installation with Java Admin Account Create

I've installed an ABAP stack and it works smoothly. Java Central Instance Service(add-in) and Java Database Instance(add-in) are both installed successfully. When I install Java Central Instance(Add-in), I get an error when system asks me to input passwords of Java admin accounts. I use same password for all sap account, eg. james123, but in this step, I input same password, the screen does not change to the next.
I paste error info below for reference.
=====================
=======sapinst.log======
=====================
WARNING 2008-08-06 20:08:01
Execution of the command "/tmp/sapinst_instdir/ERP/LM/AS-JAVA/ADDIN/DB6/DISTRIBUTED/CI/install/jlaunch UserCheck.jlaunch com.sap.security.tools.UserCheck /tmp/sapinst_instdir/ERP/LM/AS-JAVA/ADDIN/DB6/DISTRIBUTED/CI/install/lib:/tmp/sapinst_instdir/ERP/LM/AS-JAVA/ADDIN/DB6/DISTRIBUTED/CI/install/sharedlib:/tmp/sapinst_instdir/ERP/LM/AS-JAVA/ADDIN/DB6/DISTRIBUTED/CI/install -c sysnr=00 -c ashost=eccdev -c client=001 -c user=DDIC -c XXXXXX -a checkBeforeCreate -u J2EE_ADMIN -p XXXXXX -r SAP_J2EE_ADMIN -message_file UserCheck.message" finished with return code 2. Output:
java.lang.ClassNotFoundException: com.sap.security.tools.UserCheck
     at com.sap.engine.offline.FileClassLoader.findClass(FileClassLoader.java:691)
     at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:600)
     at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:578)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:79)
Please advise. Thanks so much.
James

Hi
I still got the problem.
Here is some more details
1. "Central Instance Java Add-in" installation.
2. The step is "ABAP UME" (Enter the J2EE engine user passwords). System ask user to enter password of administrator user, password of communication user, and password for SDM.
I enter a password like james123, it does not go to next screen. then I try to input other passwords, it does not go to next screen either. Does password cause the problem? What's the rule of password? And what's the return code 2 in below log file?
Here is the information which I can find out in file sapinst_dev.log.
==================sapinst_dev.log=====================
WARNING    2008-08-07 07:13:10
           CJSlibModule::writeWarning_impl()
Execution of the command "/tmp/sapinst_instdir/ERP/LM/AS-JAVA/ADDIN/DB6/DISTRIBUTED/CI/install/jlaunch UserCheck.jlaunch com.sap.security.tools.UserCheck /tmp/sapinst_instdir/ERP/LM/AS-JAVA/ADDIN/DB6/DISTRIBUTED/CI/install/lib:/tmp/sapinst_instdir/ERP/LM/AS-JAVA/ADDIN/DB6/DISTRIBUTED/CI/install/sharedlib:/tmp/sapinst_instdir/ERP/LM/AS-JAVA/ADDIN/DB6/DISTRIBUTED/CI/install -c sysnr=00 -c ashost=eccdev -c client=001 -c user=DDIC -c XXXXXX -a checkBeforeCreate -u J2EE_ADMIN -p XXXXXX -r SAP_J2EE_ADMIN -message_file UserCheck.message" finished with return code 2. Output:
java.lang.ClassNotFoundException: com.sap.security.tools.UserCheck
     at com.sap.engine.offline.FileClassLoader.findClass(FileClassLoader.java:691)
     at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:600)
     at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:578)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:79)
Please advise. thanks so much
James

Document Search - how to add new document with link to ALL

CRM 5.0, can easily add documents in the ICWC under the Document Search or gui t-code CRM_KW but the linkage is to me. How can I change or create the link to to "ALL" so all users can find them in the search.

Hi Glenn,
Just to clarify for other readers, I assume you are referring to the document search functionality in the Interaction Center that uses Content Management to search for documents and link them to the current business transaction, the current account (business partner) or the current agent/user?
I am not aware of any out of the box method for linking a document to all CRM users or agents. But if you want to have a look around at the code, I think the class and methods you might want to start with class CL_CRM_IC_CUCOCM_IMPL method REGISTER_*.
Maybe someone else has an idea how to link multiple users/agents (e.g. all users belonging to a particular org unit or profile) at once, instead of only linking the current user/agent?
Warm regards,
John

BAPI_PO_CHANGE ADD NEW POSITIONS WITH AGREEMENT REFERENCE ACCOUNT ASSIG. U

Similar Messages

Maybe you are looking for