BAPI Program -Invoice_update- For not allowing MIRO if Quality not clear
Hello Gurus,
Does anybody have program done for BAPI -Invoice Update
This is for not allowing user to post MIRO-Vendor Incoming Invoice Creation & Posting if any material against that PO or GR is lying in the Quality Inspection.
Please send if you have the same.
Thanks
Rahul
hi,
You can use user exit --EXIT_SAPLMRMP_010 (LMR1M001) which definitely will solve ur issue.
revert to me if u have any doubts on it.
murali.c
Similar Messages
-
I want to sample Sideman Strut from Garageband for an interlude I'm making for an album. How do I do so without getting sued for not clearing a sample? Someone help please!
I want to sample Sideman Strut from Garageband for an interlude I'm making for an album. How do I do so without getting sued for not clearing a sample? Someone help please!
-
Reasons for not clearing GR/IR
Hi Gurus,
There are certain transactions, which have not been cleared by executing t.code:f.13
Can any one specify why is this?
What are the reasons?
plz.Hi,
Check whether the transaction data is posted in a currency which is not company code currency. If so, there could be foreign exchange variation.
Thanks
Murali. -
Rfebbu00 not clearing the invoice
Hi All,
I am developing a program to clear the invoice specified in lockbox file if check amount matches with the invoice amount. Also if invoice company code is different from lockbox company code, I need to clear that invoice against the invoice company code. I am updating this invoice company code in table AVIP(AVIP-ABWBU). But still program rfebbu00 is not clearing that invoice for this new company code. It is posting the check on customer's account? I debugged rfebbu00, in which it's checking in table FEBCL, whether FEBCL-AGBUK(company code) is not initial. If FEBCL-AGBUK is not initial, it is used for clearing that invoice else FEBKO-BUKRS(lockbox company code) is used for clearing that invoice? So do I need to update table FEBCL also with this new company code to clear that invoice with rfebbu00??
Kindly help me on this.
Regards,
PranjaliI have the same issue. Can you please describe how you resolved?
Regards, -
Invoice cancellation not clearing original entry at FBL5N
Hi Experts,
When we are doing a sales Invoice cancellation scenario the reversal accounting document is not getting cleared automatically, further it is posting as seperate line item at FBL5N. The requirement is to offset the entry of customer debit at FBL5N. Since the customer account debit is not getting cleared it is showing as due item.
At billing document settings we have maintained SD Doc category 'N',
It is picking up posting key 11 (credit memo) instead of 12 (Reverse Invoice) when I'm reversing the Invoice.
Where do we define posting key 12 for this scenario and do we need to create a separate document type for this or any other setting needs to be configured.
Thanks in AdvanceHi
See Note 309208 - Negative posting not performed to know the possible reasons for not clearing. As SAP Note 1259505 - FAQ: New cancellation procedure in SD says:
"The most evident effect of the new cancellation procedure is the automatic
clearing of the accounting documents."
So, search in note 309208 why it happens
I hope this helps you
Regards
Eduardo -
Will a program mention for MAC OSX be allowed to download on the newest iPad version. If so, how do I get past the "safari" can not download this file?
No, because iPads do not run Mac OS X. They run iOS.
-
How to restrict the user in MIRO for not modifying price
Hi All
My requirement is How to restrict the users in MIRO screen for not modifying Material Prices of only the for specific ROH types .
For example :
Valuation class RM description
3021 RM - A
3022 RM - B
3024 RM - C
when ever we procure the above Raw materials A,B and C and
the Quantity of each Raw material @ 10 units and value @ 1 INR for each unit
RM - A procured qty 10 @1 total price is INR 10
RM - B procured qty 10 @1 total price is INR 10
RM - C procured qty 10 @1 total price is INR 10
total price of PO is INR 30
when we received invoice material prices are assume it INR 1 is excess for each material.Now the invoice price for each RM has become INR 11.
in MIRO we want restrict the user to change the price from INR 10 to 11.
suggest the best possible ways to restrict in MIRO screen
Thanks & Regards
MalaDear:
Take help of ABABPER fo implement exit using INVOICE_UPDATE or MRMH0003 Logistics Invoice Verification: Revaluation/RAP exit. If this does not help then seek help of MM functional who will help you to find exit for the required task.
rEGARDS -
How to use BAPI Program for change workcenter in co02?
Hi Abapers.
Anybody please tell me how to change the workcenter in CO02 using BAPI Programe.
Please give me sample of this.
I will give urs reward of points.
Thanks
Regards,
S.Muthu.Hi,
Use the Function module CR_WORKCENTER_UPDATE
for workcenter change.
It is an update function module so you have to call it in update mode with a COMMIT statement to trigger it.
CALL FUNCTION CR_WORKCENTER_UPDATE IN UPDATE TASK
exporting...
imporing..
COMMIT WORK.
Note: only after the commit statement the function module will be called in update mode.
Regards,
Raj. -
Any FM/Bapi/program to find BAPIs for tcodes?
Hi,
Is there any program or BAPI or FM to find all the BAPIs that are used in Tcode.
Thanks
GaneshThere is no such report, and it will be hard (via ABAP) to determine which BAPI should be used for a certain transaction. These BAPI's are normally not used in transactions since these BAPI's are to be called from remote systems. So there is no 'where used' for this.
So to determine this will be very very hard. A long shot, not even sure this will work:
1. Determine BAPI's called from IDoc's.
2. Determine function module which is called from within BAPI.
3. Simulate the 'where used' functionality in other programs.
4. Check if any of these programs have a transaction code attached to it.
As I said, very hard, if not impossible.
BTW: Are you looking for BAPI's or BADI's? Big difference.
Edited by: Micky Oestreich on Mar 6, 2009 6:22 PM -
Attempted to update Itunes to 10.5 (64-bit) tonight. About 20 seconds after it begins installing, it pauses and gives the following message,"There is a problem with this windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." Then, it backs out.
I got on the Apple support pages and after reading some posts decided to delete the appData/Local/Temp directory as instructed, but to no avail. This was not easy because windows cannot delete the file "FXSAPI Debuglogfile.txt" I was able to go through features and turn off document printing, which allowed me to delete the file....all to no avail. After this, tried uninstalling my current Itunes version, and then installing the new version, but that did not work either. Can't Apple include the prgrams required to install this new itunes update? Do not understand and am frustrated. I've spent several hours and would apprciate some help. Seems everytime Apple comes out with an new Itunes version there are problems!!!I had the same prob..
I tried repaiering Itunes 10.4 as described above - no effect. Then I deinstalled 10.4 completly.
Reinstalling 10.5 did not work after that.
Then I tried repairing "apple Software update" in control panel.
Now I could also install 10.5 - and all old data still there.
Hence - The problem seems to be in "Apple Software Update" Software -
Firefox doesn't know how to open this address, because one of the following protocols (itms-services) isn't associated with any program or is not allowed in this context.
You might need to install other software to open this address."
tried to fix in about:config but itms-services not foundn; also tried to fix using network.protocol-handler.external.foo but that wasn't listed either
trying to download an app related to a rewards gift card
firefox and os versions are up to date on MacBook AirHello!
Would you please provide the link you were trying to visit?
Also, you may want to post this question to the [https://support.mozilla.org/en-US/questions/new/desktop Firefox for Desktop Support Forum] . The Mozilla Support volunteers there may be able to better assist you.
I hope we can help you solve your problem. -
I buy adobe creative suite for teachers and students about one year ago but now i'm not longer a student. Can I still use this programs legally for commercial purposes or do I have to buy some upgrades or something like this? Please help
The license did not have use restrictions Licenses and terms of use | Adobe
BUT... when your one year Education account ends, I do not think you will be able to renew at the Education rate -
Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
Payment not clearing for Vendor through Automatic Payment Program
Hi
I had setup automatic payment program for my vendor to take $ from my GL account. When I run the payment program, it ran without any error, however, the vendor account was not cleared. The balance in GL and Vendor account remains the original amounts.
The log shows the following.
Job started
Step 001 started ( program SAPF110S, variant &0000000001081, user ID XXXXXXX)
Log for payment run for payment on 01/12/2008, identification XXXX
End of log
Job finished
Can anyone help ?
Thanks
ShaliniI have not proposed a solution. Now go to F110 and go to the table additional tab and press proposal log button on the lower right hand side. this will give a detailed log. Either analyse this error set right error or send the error log for analysis.
First run the proposal run and if it is successful, run the payment run and then to print run.
It should be run in the above sequence.
Edited by: Sivakumar Gopalakrishnan on Jan 12, 2008 7:54 PM -
I'm trying to update iTunes to 10.5.2. I have a Windows 7 64-bit Dell laptop, and when I try to update it, I get the message "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
I went to the troubleshooting page and did all of the steps they listed: uninstalled iTunes, deleted by Temp files, even disabled AVG while I downloaded again and tried to install. I still get the same message. If anyone can help me, I would really appreciate it!You must have gone to the old microsoft post.
Here is the link:
http://support.microsoft.com/kb/2438651
Maybe you are looking for
-
Using PowerShell to set Custom Access Rights on a Calendar Does not set Free/Busy Permissions
We recently discovered an issue where, if you use Exchange Management Shell to configure custom access rights, the Free/Busy permissions do not get set at all (they remain as "None"): $temp = [Microsoft.Exchange.Management.StoreTasks.MailboxFolderAcc
-
After loading FireFox 4 all worked OK for a while. Now when trying to change the tabs on left hand side (Home etc) or change selections on the apps (Weather or Calender) nothing happens. I am running iGoogle with FireFox 4 but this does not happen wh
-
Setting up a Wireless Internet Connection on Solaris 10
I am new to the whole Solaris/unix world and I was just wondering how to set up a wireless internet connection with a solaris 10 machine. I have a linksys router hooked up to a cable modem and a linksys receiver hooked up via USB on the solaris machi
-
GroupWise 7 Exchange Gateway "Bad GroupWise proxy"
I am testing the GW7 Gateway on a GW702(NW) and Exchange 2003SP2 installation. I have it basically running, but there are 2 issues that I cannot seem to fix. as part of my learning, I have determined that I must run the Gateway as an Application, due
-
Hi, is there any way to see the structure of any company code from company code to sloc level in graphical or tabular form?