BAPI_SAG_CREATE - time indepenedent condition for schdule line agreement

Hi all,
i have nade a BAPI -BAPI_SAG_CREATE for schedule line agreement. it is running okay for time dependent condition.
but it is giving error " schedule line fortime independent condition is not asllowed"when i am running for the same bapi for time independent condition whereas it is our requiirement.
kindly help.
Regards,
Santosh

Hello Santosh,
I think you have no chance, this time you found a missing funcionality, BAPI_SAG_CHANGE (and BAPI_SAG_CREATE) can only treat scheduling agreements with time-dependent conditions. Document conditions are not supported. Therefore, this kind of scheduling agreements cannot be
processed and you receive error message MEOUT019.
Regards,
Mauro

Similar Messages

Step wise config data for schedule line agreements

DEar All,
I need urgently one the foolowing doc:
step wise config data for schedule line agreements.
thanks
regards,
s KUMAR

Hi,
1) Scheduling Agreement is a long term agreement and PO is normally a one-off. When you have long term relation with supplier you will go with SA.
2) SA need not have delivery schedules at the time of ordering. It's like a contract with vendor for all basic prices, quantities & terms. You will release schedules as & when required. This method is very popular with manufacturing ind (e.g. automotive) where they negotiate prices but delivery schedules are given periodically based on their actual production/sales demands.
3) In a PO, you must give schedules in PO itself.
4) If you know contract & release order (or call-off) concept, then SA is like contract and SA schedule is like release order. PO is release order.
or
While using schedule agreement, you will create delivery schedule, when ever you require materials.
Firm and trade off zone in delivery schedule details will be forwarded to your vendor. you can create daily , weekly , monthly schedule lines
Example : if you have created a schedule agreement for product " A " for quantity 1000, and you require material of 100 nos in the first month, you can create schedule line for this 100 only and this will be transmitted to vendor( if you are using LPA you have to release schedule line). when ever you require further qty based on your requirement you will create another delivery schedule line, then it will be transmited to vendor.
In case of PO if you are ordering 1000 qty , you need to specify the delivery date in Purchase order it self, and all the dates are immediately transmited to vendor along with Purchase order.
For configuration steps please follow
http://help.sap.com/saphelp_47x200/helpdata/en/93/7439fb546011d1a7020000e829fd11/frameset.htm
Hope this will help.
Thanks,
Raja

Assigning Validation Rules to a Condition for Order Line entity

Hi,
Do we have any API(or interface) to load some validation rule( rule like 'Inventory Item= some item numbers) to a condition for Order line entity. (i.e. to load records into OE_DEF_CONDN_ELEMS).
Please let me know, thanks in advance

I am not sure of the purpose, if this to enforce a processing constraint, I will use API in the validation template defitniion and in the API I will qualify the items.
You can have these items setup in value set of a look up (custom) and then have user interface control on the same.
Is that what you are looking for?
Thanks
Nagamohan

Pricing Condition for Serivce Line Item

Hi Experts,
I'm trying to create a service PO with 1 Service line item and this service line item actually contains more than 1 service number. Using BAPI_PO_CREATE1, how can I define the pricing condition for each of the service number?
Currently, I'm able to define the pricing condition of the service item as a whole through this input parameter table POCOND.
Thanks.
Best Regards,
Weishan

Its really tricky requirement, when you are going for manual condition type.
- the best alternative to cater your requirement is to go for maintenance of condition record, which you can upload at mass with the help of LSMW. Also, will be really helpful in having report for pricing. Finally, reduce time to create sales order. Thus, discuss & encourage your user to maintain pricing based condition record. Only header condition should be on manual bases.
- If hard to convince your client on condition record. Then develop a routine with the help of ABAPer in your team. Where you can put logic. If the condition is manual enter and system is able find already entered value for material, then copy the price the slots where system don't find manually entered condition value.
Regards
JP

Price Conditions for Long Term Agreement

Hi,
i need to extract the price conditions from long term agreements. For what i can understand i have to access the KONH table with a Varkey = EBELN&EBELP of the contract, and then see conditions on KONP and KONM tables. One thing I can't understand is how a record in KONH is marked for deletion. If I create another record with same validity period for same item. the other one is superceeded as if it was cancelled. Is there any other table with header condition master data?
Furthermore, why the system lets me insert a new item with gross price, with same condition of an existing one, without having to flag for deletion the other. It seems that i can insert all the gross price (PB00) positions i want, and the last one i inserted is considered.
Someone has any clue?
thanks

Loquat - That's not a good analogy. Let me help you with your bank analogy:
* You pay your mortgage payment on time faithfully for 24.5 years, and you want to REFINANCE your mortgage with your existing bank; however, your existing bank wants to charge you closing costs on your new loan AND a termination fee for the old loan.
* HOWEVER, to solicit new business, your bank is telling other customers that they will pay the termination fees on their old mortgages if they do their refinance with the bank. So why would the bank pay to get someone else's customer but not pay the same (OR EVEN MUCH LESS) to retain the customer that they already have?
* By the way, thanks for the banking analogy. As a 20+ year banker, I can tell you that a bank would never treat new, unproven customers better than their existing, long-time customers.
Thanks all for the lively debate, but nobody has been able to tell me how Verizon is better off by taking $130 now and letting $7,000 go to someone else. That would be the equivalent of a 1.8% discount to make an existing customer feel like Verizon values their business. But they would gladly give $600 ($150 per phone) to a new customer for bringing them the same business.
Loquat - by the way, that is not a "Special Privilege"! That is the same privilege that they are offering to others that are not current customers!! How is that "special privilege"? And yes, it does sound fair.

Time out condition for FTP parameters in communication channel

Hi
Could you please tell what should be the maximum limit for time out condition in receiver file communication channel for FTP.
it should be either 120,90 or 60 seconds or can we exceed time than this?
Thanks in advance
Best Regards,
Harleen Kaur Chadha

There is no hard limit, but the time limit should be less than the polling interval: if you set the polling interval to 60 seconds, your timeout interval should be less than that value. If you exceed this value, you have the risk of an adapter deadlock (adapter stops polling)
You can imagine that a timeout interval of 300 seconds would not make much sense.

Receiver determination condition for multiple line items

I have a structure like this
<Invoice>
   <InvoiceHeader></InvoiceHeader>
<InvoiceItemDetail>
   <InvoiceItem>
         <InvoicePrice>0.00</InvoicePrice>
    </InvoiceItem>
   <InvoiceItem>
         <InvoicePrice>0.00</InvoicePrice>
    </InvoiceItem>
   <InvoiceItem>
         <InvoicePrice>0.00</InvoicePrice>
    </InvoiceItem>
</InvoiceItemDetail>
   </Invoice>
if my Invoiceprice is 0.00 in all invoice items , i need to send to a particular receiver.
In this case, how do i need formulate a receiver condition? i have tried all, but it is not working.
Regards,
Raveendra

HI,
if i have two invoice items with one price with 0.00 and 30.00. your condition will find a receiver. But, it has to find receiver only when two invoice prices are 0.00
if i have two invoice items with one price with 0.00 and 30.00
for ex:
item A = 0.00
item B = 0.00 / 30.00
But, it has to find receiver only when two invoice prices are 0.00
rootnode/InvoiceItemDetail/InvoicePrice(A) = 0.00 AND rootnode/InvoiceItemDetail/InvoicePrice(B) = 0.00 -
> target A
rootnode/InvoiceItemDetail/InvoicePrice(A) # 0.00 OR     rootnode/InvoiceItemDetail/InvoicePrice(B) # 0.00 -
> target B
thanks,

Delivery cost in scheduling agreement having time dependent condition

Hi experts,
We have one peculiar requirement.
We have palnt at indonesia. We are doing import there from india.
Our requirement is as follows.
1. We should use scheduling agreement with time dependent conditions. Because we want to track the price changes and sometimes we want to retro pricing effect and revaluate it.
2. We want to add importers vat and import tax.
3. But those tax amount should not get added into inventory
4. During MIRO it should get accounted to vendor.
We could succeed this by removing "Time dependend condition" check in document type config.
But our client is definitely required the point no 1.
But when we activate time dependent condition check, during MIRO those conditions are not appearing. But if you remove that check, it is appearing in MIRO accounting.
Can any one suggest suitable solution?
Or SAP MIRO will not permit this scenario?
regards,
K.Sundaresan.

delivery cost will not work if u remove the tick Time dependend condition for SA
SAP MIRO will not permit this scenario
so u will have to decide what is more important to u and act accordingly
Solution will be u ask client what is mor imp for there company
as SAP will not support MIRO for deliver for time dependent condition
I had a talk with SAP on this and they have told that
SAP will not support MIRO for deliver for time dependent condition
AS in Case of imports in india we need to do MIRO before GR
hope this hel;sp

MWVS- Time Independent condition

Hi,
We are using MWVS condition type which is time independent condition for Input tax, now the requirement is percentage in this conditon is going to be changed form a future date. then how to bring in condition value baesd on time period.
Thanks,
Kiran Bodla

Hi,
This can be done through corresponding tax code and we have to change the percentage through FTXP.
Thanks,
Kiran

How to trigger Condition Access sequence multiple times for one line item?

Hi,
We have a situation that, User will enter a Promo code (custom Field) in Sales order Header Additional data B tab to apply discount for line items.
Logic goes like this:
1. For each Promo code .. there may be multiple sale deals (Max 3 at this point).
2. For each line item (refering to tkomp table) we have to apply the sale deals (found above) the Condition access sequence will pick the right sale deal to apply the line item.
3.we have enhanced the tkomp structure to hold the sale deal.
Challenge:
As we have the standard logic to trigger the condition access sequence once for each line item, how we can apply 3 sale deals for single line item. Is there any logic or way to trigger the condition access sequence multiple times for single line item with diffrent sale deals. ~ There may be one valid sale deal for one line.
Functional team maintained diffrent access tables in the access sequence!!!
Fnds, please help me to get some clue
Thanks,
Sunil Y

Hi Eduardo , Thanks for the response.
I am trying to explain again, this is the requirment given by the functional guys.
we have Promo code in Hearder Addtional data B tab --> Have to retrieve Sale Deals -->
At this point of time we may have at max 3 Sale Deals. we don't know which sale deal is vallied for which item we have in TKOMP. We have enhanced the TKOMP structure to hold one sale deal only (ZZPROMO).
We have enhanced USEREXIT_PRICING_PREPARE_TKOMP in RV60AFZZ to populate the value in TKOMP. Then it will go for diffrent access sequence to find the proper condition.
Our challenge is that, for each line item we have 3 sale deals, we don't know which one is valid for which line. but we have to apply the vallied sale Deal to the line items. Line item 10 may have Sale Deal 2 , item 20 may have Sale Deal3 and 30 may have sale deal 1.
We may have solution, by fixing some thing in the code or through config. But i am confused that is it a valid requirment?
Please help me ...
Thanks,
Sunil Y

Issue in using custom discount condition type in pricing agreement at Service Contract line item level

Hello
We are facing an issue while using a Z discount condition type in price agreement at service contract line item level.
A Z Condition type has been created in ECC and assigned to the pricing procedure. This pricing procedure is downloaded in CRM and determined in the service contract.
A condition maintenance group using this Z condition type is created in CRM and assigned to service contract item category.
Condition records are created in CRM for this condition type/condition maintenance group for specific products along with sales org and discount percentage.
But when the price agreement(using this condition type) is used at the item level of a service contract, the system throws errors (related to product/unit of measure and sales org, even though no issues seem to be there)and thus the price agreement is not allowed to be used.
If anyone has worked on such kind of scenario, please get in touch, I will share more details for the same.
Regards
Ankit Arora

Dear Ankit,
Once the pricing procedure is downloaded, please maintain the document pricing procedure at service contract header level, and maintain the customer pricing procedure at business partner sales area billing data.
In spro, maintain the pricing procedure for the combination of sales area, document pricing procedure, customer pricing procedure.
Please crosscheck whether the condition table is active or not.
Regards,
Maddy

HT4009 where is the agree button on I phone 4 to agree to new updated terms and conditions for downloading new apps? read all info all 54pages but no agree button at end?

where is the agree button on I phone 4 to agree to new updated terms and conditions for downloading new apps? read all info all 54pages but no agree button at end?

Try first signing out of the iTunes and App Store in Settings>iTunes and App Stores (tap on your apple ID and choose sign out) then sign back in.
Then do a hard reset, hold down the home button and the sleep/wake button at the same time until you see a white Apple then release.
Then go ahead and try again, should work.
I hope this helps!

My ipod 4th gen with ios.51or something doesnt let me agree to the march latest terms and conditions for the apple app store

Hi the title explains it and i need help cause it is really annoying and i am not sure if i need to get a new ipod please help and tell me wahat to do thanks and the question is my ipod 4th gen is not letting me agree to the lattest terms and conditions for the apple store the latest terms and conditions is the march one thanks soo much if you can help me :)

- Try a reset. Nothing is lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Also see the previous discussions on the right side of this page under the heading "More Like This" with your same problem.

HT1904 when accepting the terms and conditions for the new terms of agreement of the policy, i press accept the terms and press agree and it will not allow me to purchase the music because it keeps going to the same page of terms and agreements

when accepting the terms and conditions for the new terms of agreement of the policy, i press accept the terms and press agree and it will not allow me to purchase the music because it keeps going to the same page of terms and agreements

If you can't scroll to the bottom
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

Price and Pricing conditions are not copied to PO for a line item !!

Hi
I have created a PO w.r.t a PR which has only one line item.
Now, I add another line item to this existing PO, i get an error message that the Price and Pricing conditions are not copied.
How do i rectify this error !!
Where might be the link for this Price and Pricing conditions to get copied in to this PO ??
MaruthiRam

What kind of PR and in the PO same material you enter for new line or new material and do you have any funcitonal authorization assigned o your user id
please reply

BAPI_SAG_CREATE - time indepenedent condition for schdule line agreement

Similar Messages

Maybe you are looking for