BAPI to create profile for material

Hi all,
Is there a BAPI to do following things:
1. create Profile for material
2. Assign new Class Type 300 for Material
3. add variants class to have characteristics and update its values.
Thanks in advance,
Amruta

Hi Amrutha,
Please try this BAPI
BAPI_UI_CREATE
Regards
Rasheed

Similar Messages

How to display the change data in configruation profile for material

dear export :
i want to know when the dependencies of material is deleted and is added in confirgruation profile for material ,but i donnt know how to disaply the change data .
please help me .
best regards.

Hi
I don't know if the material document is managed by change document, after posting it any data can be changed in material document.
Max

How can I launch firefox on different displays simultaneously without creating profiles for each of them

On my solaris server, there is an application which, in order to display some information, opens the browser. The server can be accessed thorugh X windows by various users. The issue is that whn firefox is open on one display, it fails to open on another display.
The resolution for this problem as suggested by a lot of users on various forums is to create different profiles for various firefox instances. However, everytime my application will launch firefox, i will have to invoke it with -P option which will pop up the profile manager. I do not wish to show the pop up for creating profiles:(. Is there some way to allow multilple instances of firefox to run on different displays?

when you lock the preferences with the mozilla.cfg file in the firefox program folder as it's described in the mozillazine kb article above, it should apply for all users...

How to create profile for apple tv

How do i create profile file for Apple Tv?

it really comes down to what you mean by a pofile file
profile is often used for a custom setting for a user
a file is a storage unit located on a file system on a device
non of those things are a feature supported in the way you present it by the appletv

BAPI to create conatct for a ERP customer

hi all,
can we create contact for a customer using RFC or BAPI in ERP,if yes please help me by providing the FM(bapi or RFC) details.
regards,
goutham

Hello Goutham,
You can try BAPI_PARTNEREMPLOYEE_GETINTNUM and BAPI_ADDRCONTPART_SAVEREPLICA.
For mass updating of contact persons data it might be better to update such data from customer master transactions like VAP2 or XD02. The reason why I would not recommend to use BAPI_ADDRCONTPART is because it will not update the contact person table (KNVK) which is the main contact person table. VAP2 or XD02 will assure a consisten update on
both tables KNVK and ADRP. Therefore, you may use SXDA or LSMW or SM35 via batch input
Please have a look to notes 384462 and 306275.
If you still want to use directly Bapi_AddrcontPart-savereplica, please check the documentation or in the BOR (Transaction SWO1, Object BUS4003, method SAVEREPLICA and menu goto/documentation).
Hope this information could help you.
Thanks
Amber

Rounding Profile for Material Staging

To All
Is it possible to use a rounding profile for materials used in material staging transaction LP12?
Currently it totals production order demands. e.g.
Prod Order 1000000
Material A
Requirement 0.6kg
Prod Order 1000001
Material A
Requirement 0.7kg
So quantity to be staged to the PSA is shown as 1.3kg.
I know I can manually overide the quantity and enter 2 kg and process. However, how can I get LP12 to 'round up' the total quantity so that the screen diplays 2 kg to process instead of manually entering it?
Do I use the Rounding Profile in MRP1?

Rounding Profile is used to define the quantity of the planned orders during MRP run. It's not related to staging.
I wonder if you can use some different strategy in the control cycle : "2" crate parts and this can solve your issue...
But if you can work wtih cummulative quantities from released order, there is no solution in the standard.
Another option to explore is the HU (handling units) .

Create BOM for material

Hi All,
I am using CSAP_MAT_BOM_READ to read the BOM details of one material and using these detals i am creating BOM for other material. I am using CSAP_MAT_BOM_CREATE to create the BOM, But always it is returing
sy-subrc as 1.
I am not able to find out what kind of error this is, is this data error or any other error.
If anyone used this FM before please provide some input on how to use this FM for above requirement.
Regards,
Rahul

instead use BAPI_MATERIAL_BOM_GROUP_CREATE fm which will create a BOM for a material.

Bapi to create delivery for purchase orders

Hi Expets,
what is the bapi to create a delivery for purchase orders.urgent.please do the needful
kiran j

Hi,
Check below link.
Re: BAPI for Inbound delivery
Re: BAPI_OUTB_DELIVERY_CREATE_STO

Cannot create profile for IMG display only access - Timeout

Hello all,
I have created a role for IMG display only role. It has hundreds of Org values and fields. I have made ACTVT=03 in change Authorization
Everything is fine except when i click to create profile, the system does starts processing but its taking hell of a time. It times out since the system has time out after 9000s. Anyway 2 hrs for creating profile..phew!
Is there a way I can create profile?
Alternatively, Is there a simpler way to create role for IMG display only access?

How are you building your role? It shouldn't be timing out - might be worth having a chat with your basis team.
Alternatively, if you can save the role (but not generate it) you might be able to generate it in the background via transaction SUPC. It's better to understand why you cany create it first though.

Creating profiles for special illuminants in DNG Profile Editor

I have successfully used the DNG Profile Editor with images of the ColorChecker Passport to create simple dcp profiles for daylight and tungsten illumination. I have obtained very satisfactory profiles using both a single image and the "both color tables" option, as well as two images (one tungsten and one daylight) and the "dual illuminant" method.
Now I wish to construct separate profiles for use with unusual light sources: fluorescent lights and white LED lights. Can some one tell me how this is best done using the DNG Profile Editor.
Appreciate any suggestions.
Mike.

When there are two illuminants in a profile ACR will interpolate an effective profile based on how far the actual image WB is from one of the illuminants in the dual profile. For example if the profile is using the 2650K (Tungsten) and 6500K (hazy sunight) as the two illuminants and your images is taken in direct sunlight with a WB of 5000K then the profile will be more the D65 profile but a little bit of the redder A profile mixed in. This allows the dual profile to be used for any lighting with a Temperature between A and D65 that also has a Tint number close to or a little above zero. An A/D65 dual profile fails for fluorescent lighting because the Tint number is quite a bit different than either the A or D65 Tint numbers.
To your question, for a single illuminant profile, you should use the Both Color Tables option so that no matter what WB your photo has, the profile used will be the same. This makes the illuminant A and D65 irrelevant because any interpolation between the two illuminants would result in the same profile numbers.
However, I also think that the dual illuminant numbers are not necessarily hard-coded to A and D65, at least not when you use the CCPP plug-in for LR to create the profile, but are actually whatever your photos WB numbers are, so you can make dual-illuminant profiles for other pairs of lighting, such as fluorescent and daylight or fluorescent and incandescent, or even sunlight and shade, depending on what mixed lighting you have at your location and time of day.
An easy way to test this would be to make a dual profile, one DNG being fluorescent and one being your blue LEDs (two sources far away from A or D65), then also create two single profiles, one for each of those same two lighting sources. Test the dual-illuminant profile with the fluorescent CCPP image, and then switch the profile to the single illuminant fluorescent one and see if anything looks different. Do the same test with the blue-LED CCPP image with dual and single blue-LED profiles.
If the look of the image is the same when using a dual profile where one end is the same as the single profile both tested with the actual CCPP image that was used to make the profile or one end of the profile, then the illuminant numbers in the dual profile change to whatever the DNGs illuminants were. However, if the look changes between the dual profile and the single profile when applied to one of the dual-profiles image's WB then the illuminant numbers must be fixed to A and D65, and so any dual profiles are useless if the two illuminants do not match A and D65.
If your experiment fails using the DNGPE, then try it using the CCPP software and the LR plug-in.

Mdm_clnt_extr is not able to create idoc for material

Hello ,
In my scenario material data has to transfered from ECC6.0 to MDM5.5 using XI.
Scenario is configured in XI.
Trying to extreact materials from ECC6.0 using mdm_clnt_extr.
Material_extract is extraction object used in variant required for mdm_clnt_extr.
once I give values for matnr and starts extraction, background job goes into error
saying 'This idoc is permitted for XI logical system'. where In we20 of ECC6.0 , I have MATMAS04 and MATMAS05. In both cases I am getting error 'This idoc is permitted for XI logical system'.
At the same one bp document od MDM , message type MATMDM is given, but i dont see that in ECC6.0.
Pl can anyone suugest on this.
thanks,
Sharada

Hi Sharada,
i think there is some problem in your RFC destination settings,tats why the error is coming.
I am trying to get the exact solution for your error,meanwhile you can check your configuration settings.
I will outline the ALE Settings .
1 WE21 : Set up the port in IDOC Processing
2 SM59 : Set the RFC Destination to XI and check it.
3 WE20 : Create a partner profile with Partner Type LS (Logical System) for XI
Include the message types : DEBMDM, MATMAS, MDMRECEIPT
4 BD64 : Create a Distribution model with Sender as SAP and receiver as XI.
Include the message type DEBMDM,MDMRECEIPT,MATMAS,/SAPSSLL/MATMAS_SLL
5 Generate partner profile. This will generate it in the receiving system.
Following transactions are useful for trouble shooting any idoc issues
WE02, WE20 ,BD87,SMQ2,SMQ3 and SALE->System Monitor->trfc check
Hope it will solve your problem.
<b>Please remark iof it really helped you :-)</b>
Thanks,
shiv prashant dixit

Create view for Material using BAPI_MATERIAL_SAVEDATA

Hello. I need create Accounting View(1&2) and Costing View(1&2) using FM BAPI_MATERIAL_SAVEDATA, but i don't now who importing values are required for this...
please HELP!!!!

Hi,
Check this link.
http://sap-img.com/abap/bapi-to-copy-materials-from-one-plant-to-another.htm
Thanks,
Anitha

BAPI to create output for invoice

Hi
I want to create an output (or repeat output) for an invoice, and been looking in SAP, on SDN, Google etc. for finding a BAPI that can manage that.
I have not been able to do that, so I have created a Batch Input - but it is really slow.
Does anybody know if there is a BAPI to do that - and maybe an example.
Thanks,

Hi ,
To create a Output or Send data to external system thorugh BAPI is not easy.
Through application we can trigger output.
On this cases we have changes pointers concept try to check it.
This is the BAPI 'BAPI_INCOMINGINVOICE_CREATE' to create a Invoice.
Prabhudas

Calibration chart for creating profile for Macro lens

I would like an LCP for my Tamron AF28-300mm F/3.5-6.3 XR Di VC LD Aspherical [IF] Macro lens. While I am willing to do the work to try to create this myself, I have a problem with the appropriate Calibration Chart to use for the Macro end of the zoom. At 300mm zoom, the camera images ~ 12x7cm, so none of the standard charts will fit within the frame, let alone being able to get one to fill roughly 1/2 the picture; even at only 28mm zoom one still images only ~52x25cm.
What is the best thing to do – print a chart of a reduced magnification or what?
Advice will be most welcome .
Jo

Very helpful, thanks MadManChan2000.
Just one supplementary question. I presume that I will need to set the Profile Creator with a reduced checker size, scaled in points by the reduction in printing scale?

How to create MRP for material?

Hello guys ,
I want to create the MRP for my FTRM material?
Thanks in advance.

Hi,
This is purely PP Configurations, Pls refer below link
http://www.sap-img.com/sap-pp.htm
http://www.sap-basis-abap.com/sappp01.htm
Regards,
Sankaran

BAPI to create profile for material

Similar Messages

Maybe you are looking for