BAPI_UI_GETDETAIL - switching it on and off?

Hi,
a short question - since which R/3 release is BAPI_UI_GETDETAIL available? We had problems with a piece of software because apparently the BAPI is not available in (Kernel release) 4.6D and Partner release 4.6C.
When I look into the transaction BAPI (on a ECC 5.0 System), I see that it is release since 620. Since I am not totally sure about the versions, I take it that a 4.6C system is a 640 system. Shouldn't that mean that the BAPI should be available there?
If not, from what version is the BAPI actually available?
Sameer
P.S - I also posted the same question in the Data Transfers section in ABAP Development and have recieved no response. I thought that since the question is a general one and not really related to development, maybe I could start the topic here in Coffee Corner too...

Hi Kjetil,
you brought up an interesting point - looks like I was mixed up in the versions too.
We tried a few tests (JCo) with the remote system, and the information we got was this -
sap.info.Kernel.Release = 46D
sap.info.Release = 640
sap.info.Partner.Release = 46C
Therefore, in addition to the original question, my new question - on my ECC 5.0 system, I see that the SAP_BASIS is also 640. So if 46C and/or 46C is SAP release 640, why does the BAPI not show up?
Basis isn't my area either though I am starting to get the hang of it
Bye,
Sameer

Similar Messages

How to switch trends on and off in a graph

Hi,
Quite new to this so bear with me. I've numerous temperature sensors I'd like to be able to display on a graphical display. To display all of them on one graph would be a bit of a headache for the user and I don't want numerous graphical displays. I'm after the best way to code this up so I can select the required channels by using individual boolean switches for each channel.
I'm thinking that a switch next to each channel name would be a neat solution to switch channels on and off on the graph.
Thank you
Carl
Solved!
Go to Solution.

LabVIEW 2013 has inbuilt Plot Visible selection in Plot Legand in Waveform Graph

Ios 6, my wifi doesnt work, even after switching wifi on and off, aswell as removing saved wifi spots and switching from manual to auto

ios 6, my wifi doesnt work
even after switching wifi on and off
as well as removing saved wifi spots
and tried switching from manual to auto
it works intermittently after these changes are made, but still shuts off.
i have ios 6 on both the iPhone 4 & the Iphone 5.
my router at home is D-Link router
please help!

You have the same problem in two mobiles? Uou....
I have had used D Link router before, and I faced problems to connect my computer.
Now I bought Netgear, and it shows strongly better than the f.... D Link...
Try:
Settings>>WiFi, and then turn off Ask for Conection;
Or:
Settings>>Privacity, be sure the Location Service is turn on;
Or:
In Settings>>General>>Reset, select "Reset all Adjusts". (Sorry, but it will change some personal adjustments, but will not delete anything at all)

My i pod appears to be in a loop it just switches itself on and off

my i pod appears to be in a loop it just switches itself on and off anyone else had this problem if so whats the fix??
Ray

Have you tried following the steps in these articles:
http://docs.info.apple.com/article.html?artnum=61584
http://docs.info.apple.com/article.html?artnum=304997

My iphone 5 keeps switching itself on and off and screen different colours?

My iphone 5 keeps switching itself on and off randomly, the screen has also gone a green and red colour prior to it turning itself off and sometimes will not come back on unless re-set? help?!

If you already tried a restore to factory settings, it looks like a hardware issue to me.
I would take it to an Apple Store for replacement.

I got Iphone 3 gs and updated ios 5.01 when charging my phone it keeps switching itself on and off

I got Iphone 3 gs and updated ios 5.01 when charging my phone it keeps switching itself on and off.

Same problem. Phone was unusable. I managed to turn airplane mode on during one of the phone's "on" moments. It went off once more but then came back on and stayed on long enough to back up and restore via iTunes. As I don't rely on the phone to retain photos, contacts or mail etc I chose to do a complete restore and treat it as a new phone. I did this just to make it as clean a restore as possible but you may be able to restore from your backup and get the same fix? All is good still some 24 hours later. Hope this helps.

Hey guys i have the newest macbook air and i recently bought a magic mouse and my macbook doesn't detect it i already tried switching it on and off and all that other stuff. Any help??

Hey guys i have the newest macbook air and i recently bought a magic mouse and my macbook doesn't detect it i already tried switching it on and off and all that other stuff. Any help??

when you have the same issue after the SMC reset:
put new batteries in the MM (even if the others are not empty), turn Bluetooth off then on again on the MBA, take all USB connections out (if any), delete the pairing of the MM and re pair the MM.

Applications installed in my iTouch does not launch. the music and internet functions but the installed applications does not. tried switching it on and off, still problem persists

Applications installed in my iTouch does not launch. the music and internet functions but the installed applications does not. tried switching it on and off, still problem persists. help...

Your only chance besides getting it serviced would be setting it up as new device:
http://support.apple.com/kb/HT4137

Magic Mouse: Is there and easy way to keep switching scroll on and off

I'm afraid I'm not very adventurous with Magic Mouse. The only feature I use is One finger Scroll - with intertia. Its great for web surfing. Trouble is its a nightmare for programmes like illustrator and inDesign where the page leaps about in a crazy way at the slightest touch. So, I currently spend all day going to System Preferences - Mouse - to switch the Scroll feature on or off. Does anyone know a better way of doing this? Is there a keyboard command? Could I set something up in Automator? The ideal would be on the mouse itself: Two taps turns it on, two taps turns it off. I've just downloaded an app called BetterTouchTool which I though would be an answer to my prayers - but I can figure it out.
Any ideas, anyone?

Thanks Capfred
I've tried switching off inertia - but I prefer it for websites. Inertia is much faster and more fun to use. Annoying thing is, I never had this problem with the old Mighty Mouse because it was easy to avoid touching the little scroll ball when I didn't want to. My body language is obviously not cut out for Magic Mouse because sometimes when I'm reaching for it my finger must slightly slide across it before I grip it firmly. This isn't a problem on most websites because the only option is to scroll up and down. But in Illustrator and inDesign, this causes my carefully centred page to go flying left or right and I have to use a keyboard command to re-centre it.
I'm sure I can't be the only one to have this problem!

I have to switch bluetooth on and off to use bluetooth keyboard??

I'm using an iPad 3G 64GB with my Apple bluetooth keyboard. Everything works great, but one thing annoys me. If I'm using the bluetooth keyboard and then walk away from my desk and lay in bed with my ipad, I cant bring up the software keyboard without turning bluetooth "off." But, if I take my ipad to work (without my keyboard), then bluetooth can be "on," and the software keyboard works fine (because I'm out of range of the Apple keyboard).
I want to be able to leave bluetooth "on" all the time.
Is there any way to force up the software keyboard without switching bluetooth "off" or physically bringing it up using the bluetooth keyboard?

I have the same issue. I know you can turn bluetooth off in "settings" or turn off the apple wireless keyboard when it's near the iPad and it will disconnect.
However, I'm using this for business and I have the autolock turned on. If I'm using the iPad with the wireless keyboard, and I pack up for the day to go, without turning the settings off or the wireless keyboard off, the next time I pull up the iPad, the autolock screen comes up with no place to type (software keyboard). If I don't have the wireless keyboard handy, there is no other way to turn off the bluetooth, or bring up the software keyboard.
There really should be someway to address this. Perhaps when the autolock shows up expecting the wireless keyboard, you could double tap the screen and the software keyboard would appear and/or ask you if you want to turn off the bluetooth connection for the keyboard.

Do I need to manually switch Wifi on and off?

I'm in the habit of manually switching the 3G off and Wifi on, when I get home. Do I need to? Or is there a way to get the phone to pick up Wifi automatically? I think our friend's iPhone does this automatically.

tjmack99 wrote:
So, if I'm out driving, using 3G, then arrive home where I have WIFI, there's no way for WIFI to automatically be recognized, it has to be manually switched on? I think that's what I'm hearing from everyone.
Thanks
If you have the WiFi switch on, when you arrive at home, the device will switch to the WiFi radio automatically. Mine does it all the time. However leaving the switch on all day will reduce your daily battery life as the phone looks for a connection.

Creating Subtitles and Switching them ON and OFF

Hi, I am new to Adobe Premiere Pro and wanted to author a video, I would also like to add subtitles in English and then allow the published to have an option that allows you to Switch ON/OFF the subtitles, If anyone can guide me on the right path for this it would be much appreciated.
Many Thanks in advance

This is not something that can be done in a video. Are you thinking in terms of a DVD? If so you can ask your question in the Adobe Encore DVD forums.
Cheers
Eddie
Forum FAQ
Premiere Pro Wiki
- Over 250 frequently answered questions
- Over 100 free tutorials
- Maintained by editors like
you

Grid lines in numbers, how do you switch them on and off?

I am having trouble getting the grid lines to show in numbers, the format has grid lines highlighted in blue but switching this off or on has no effect on grid lines in the sheet

Hi algebra,
I got an email notification of your reply, but this page has not yet updated. This forum software sometimes is out of sync with the emails.
Numbers 3.2
Click on the 'bullseye' top left of the table to select the whole table
In the format panel on the right of the Numbers window, click on Cell
Border > Line style, Width (I prefer 1pt), Colour (I prefer Black) , border pattern (I prefer to set them all the same, see below)
Regards,
Ian.

TS1559 I can't connect any WiFi on my iPhone 4s. Switch is grey and "OFF"

Also, it scans for Bluetooth devices, but never finds any. I did the latest update BECAUSE I was having problems, but that didn't fix it. I reset network settings; still a grey WiFi switch "off". Software restore didn't help.e

Here's an apple support article specfically for your issue:
http://support.apple.com/kb/ts1559

My phone keeps on switching itself on and off and when I check the diagnostic data it says that there is a crash.cps

how does one deal with a panic.cps

I have had voice mail set up on my phone for 10 years. When I did the last iOS update before 7 I guess it wiped out my voice mail. Can I not set it up myself? I haven't changed my message in years.

BAPI_UI_GETDETAIL - switching it on and off?

Similar Messages

Maybe you are looking for