Bar codes for zip codes
Will Pages 09 print bar codes for zip codes?
<Edited by Moderator>
I use the free Dashboard widget, EasyEnvelopes, that can print the USPS bar code for the entered address.
Similar Messages
-
Pass URL parameter for zip code
In this fake url I want to pass the zip code value of the confirmed BP into "zipcode"
https://acme.com/locator.jsp?zip=zipcode
from the other post I have read the parameter name would be "zipcode" and thru the transaction launcher I am able to assign parameter value =
//selectedClmBpLinkRelationship/BpRelLinkBusinessPartner/BuilStandardAddressRel/POSTL_COD1
The transaction launcher is opening the launcher but not passing the value into the field. The window opens but the field is not filled with the zip code.
If I open a new ie browser and put in url
https://acme.com/locator.jsp?zip=60001
the url is reached and 60001 is filling the zip code field.
Is there an easy way to debug and see if any value is getting passed?
Am I conceptually on base for what I am trying to do?Hi Shwetha,
That got me pointed in the right direction where we could get it to work.
For others, these were some other points we used to get it to work.
1. in the IMG where the url is defined don't add the ZIP parameter here so our IMG entry = https://acme.com/locator.jsp?
when the page launched correctly the parameters showed https://acme.com/locator.jsp?&zipcode=60001
2. for zip code parameter value we used //currentCustomer/BuilStandardAddressRel/POSTL_COD1 >> this goes in the transaction launcher with parameter zipcode and is then visible in the IMG entry "copy/delete launch transactions" -
Format column in Numbers for zip code
how do I get a leading zero for zip codes??
start by selecting the cell(s) yu want to format, then go to the Format menu and choose Create Custom Cell Format:
In the dialogue that opens:
Edit the name to reflect the use to which this format will be placed.
Leave the type as Numbers & Text
Note the example (orange circle) showing how a number will appear under the curent format.
Click the white triangle (see arrow) in the Integer tablet (red circle) to open the options menu.
Take three trips to the options menu:
Choose Hide Separator
Choose Show Zeros for Unused Digits
Choose Add Digit
Click OK to return to the document.
Note that this will work for the original five digit Zip codes. Extended five-four codes will be treated as text, as can be seen in the image above. and will not sort correctly (see column D of left table below). For correct sorting, format the column as text and enter the Zip codes including the leading zeros, as has been done in the single column on the right (before the column was sorted into the displayed order).
Regards,
Barry -
Ion Channel not working for Zip Code 32162. Frozen Screen!
About 2-3 days ago, the Ion Channel #15 for Zip Code 32162 is a frozen screen. What's the deal. Same on all 3 TVs which have different Boxes.
TomHosken wrote:
About 2-3 days ago, the Ion Channel #15 for Zip Code 32162 is a frozen screen. What's the deal. Same on all 3 TVs which have different Boxes.
Apologies for the issue and the experience that you described above. Are you still having this issue?
I have asked a colleague to review your account and reach out to you so that we can get any underlying issues identified and resolved.
Thanks for your patience. -
hello sir,i need labview code for a code which is written in matlab...
clc;
close all;
clear all;
Ez= zeros(1,200);
Hy=zeros(1,200);
Ca=1;
Cb=.4519;
n=1;
while(n<1500)
for k = 2:200
Ez(k)=Ez(k) + Cb*(Hy(k)-Hy(k-1));
end
Ez(1)=1;
for k=1:199
Hy(k)=Hy(k)+Cb*(Ez(k+1)-Ez(k));
end
plot(Ez,'b')
hold on
plot(Hy,'r')
hold off
pause(0.001);
n=n+1;
end
thankuWell, this code is quite trivial and if you have to learn LabVIEW anyway, you might as well try to implement it.
A few things to remember:
The first array element in LabVIEW has index #0, while in matlab it has index #1, so everything dealing with array indices needs to be adjusted slightly.
The zeroes function equivalent is "initialize array".
Keep the array in a shift register as you update elements.
use FOR loops.
Use one of the graphs to display the data.
LabVIEW Champion . Do more with less code and in less time . -
Tax codes for Company code wise
hi kings
I am facing big problem is I want to listout the company codewise tax codes for whatever i am using in last year. So how can i get the list for tax code for my code with in period.
regards
sritry this:
REPORT ztaxrep01.
TABLES bset.
SELECT-OPTIONS: bk FOR bset-bukrs.
PARAMETERS yr TYPE gjahr.
DATA: BEGIN OF ztab OCCURS 0,
bukrs TYPE bset-bukrs,
land1 TYPE t001-land1,
kalsm TYPE t005-kalsm,
mwskz TYPE bset-mwskz,
END OF ztab.
DATA itab LIKE ztab.
SELECT bukrs land1 FROM t001 INTO CORRESPONDING FIELDS OF itab
WHERE bukrs IN bk.
SELECT SINGLE kalsm FROM t005 INTO itab-kalsm
WHERE land1 = itab-land1.
SELECT mwskz FROM t007a INTO itab-mwskz
WHERE kalsm = itab-kalsm.
SELECT SINGLE mandt FROM bset INTO sy-mandt
WHERE bukrs = itab-bukrs
AND gjahr = yr
AND mwskz = itab-mwskz.
IF sy-subrc = 0.
APPEND itab TO ztab.
ENDIF.
ENDSELECT.
CLEAR itab.
ENDSELECT.
LOOP AT ztab.
WRITE: / ztab-bukrs, ztab-land1, ztab-kalsm, ztab-mwskz.
AT END OF bukrs.
ULINE. SKIP.
ENDAT.
ENDLOOP.
A. -
Process code for T-code : FB60
Dear all.
Could you please tell me ,what is Process code for T-code : FB60?
if not avaiable,Please suggest me.
Thanks,
Prasad.Hello
in SRM 5.0 we dont have this FB60 transaction available...
REgards,
Daniel -
Leading zeros for zip codes in Numbers
I couldn't find an answer for this question but finally figured it out so wanted to share. Here's how I got the zeros to show in my zip code column:
You can make a custom cell format from the cells palette. You have to hide the separator and add a digit using the Integers bubble. Then choose show zeros for unused digits.
Then apply this format to the entire zip code column in your doc.I was having the same problem. You pointed me in the right direction but in 09 the prompts are slightly different.. Hilight the column. In the cell inspector, cell format, choose NUMERICAL SYSTEM and set the number of places to five.
It should now look right but before you save it, create a new column and format it as above into TEXT. Then copy the one you've fixed, and paste it into the new text column. This should save fine as cvs in any event, as well as numbers. -
How to set columns for Zip Codes?
I am new to iMac and in my first week using trial version of Numbers. I work in sales and we do lots of mailings using merging of data and addresses for post cards, labels, etc.
I cannot see how to set columns to a zip code setting. All zips entered beginning with a 0 drop the front 0. I tried calling the column as Text, but it did not help. I can type a ' in from of the 0 and it works, but this takes an insane amount of time and will not work for us.
How do you deal with Zip Codes? Are there labeling options for mailing built into Numbers? I really want to dump all MS products but will have to drop mac and return buy Office if this is not correctable.
Thank you,
BrownieHello
Setting the column format to text do the trick on my french version too.
With AppleWorks, I was accustomed to use a zeroSlashed so it remained in my zip codes when I moved codes here and there.
Yvan KOENIG (from FRANCE jeudi 13 septembre 2007 17:44:38) -
Msi Reg wrong fromat for zip code.
Iam a member of msi site I wont to reg a new motherboard and get some tech advice for the board working with command centre.
Every time I fill in my details on the site its giving me this error....
Error Number: 1366
Incorrect integer value: 'BN159BA' for column 'zip code' at row 1
So any idea what's happing ..I hope its the place to post this.
I'm in the uk so it will be mypostcode.Thanks for your answer mate, but i am still waiting
It's a pitty as i had to return my old earphones by 12/09/12 .... and there is no way to tell apple that my new earphones are still not here -
I need Native Code for my code
can anyone tell me native code for my method ..
BOOL CALLBACK DetectProcesses(HWND hwnd, LPARAM lParam)
char str[60] ;
::GetWindowText(hwnd, str, 60) ;
CListBox listbox = (CListBox )lParam ;
if( str[0] != 0 )
listbox->AddString( str ) ;
return true ;
BOOL CAllProcessesDlg::OnInitDialog()
CDialog::OnInitDialog();
// Add "About..." menu item to system menu.
// IDM_ABOUTBOX must be in the system command range.
ASSERT((IDM_ABOUTBOX & 0xFFF0) == IDM_ABOUTBOX);
ASSERT(IDM_ABOUTBOX < 0xF000);
CMenu* pSysMenu = GetSystemMenu(FALSE);
if (pSysMenu != NULL)
CString strAboutMenu;
strAboutMenu.LoadString(IDS_ABOUTBOX);
if (!strAboutMenu.IsEmpty())
pSysMenu->AppendMenu(MF_SEPARATOR);
pSysMenu->AppendMenu(MF_STRING, IDM_ABOUTBOX, strAboutMenu);
// Set the icon for this dialog. The framework does this automatically
// when the application's main window is not a dialog
SetIcon(m_hIcon, TRUE); // Set big icon
SetIcon(m_hIcon, FALSE); // Set small icon
LPARAM lp = (LPARAM)&m_process ;
::EnumWindows(DetectProcesses, lp) ;
return TRUE; // return TRUE unless you set the focus to a control
}can anyone tell me native code for my method ..native code for your method
-
58L7300 No provider found for my zip code or zip codes near me
I again am not able to access all "features" of the cloud. So I did my usual factory default of the device and now I can't progress on the Cloud registration via wired or wireless. I was able to populate my FB username in there and it recognized that with the email that was sent to register the device. Now I cannot complete the cloud registration and forced to have the smart TV to run as a dumb TV. See attached
Attachments:
IMG_0064.JPG 1591 KBIf you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 631-3811.
- Peter -
Which Code and ZIP code do I need to type in when creating my Account?
I am creating my account in app store and it asks information as VISA and adress...
I am typing NONE to VISA and when I am typing code it says "incorrect"! Which code do i need to type?
I am in russia, does it mean that this code has to be the code of the city where I am?You can only purchase from the itunes store of the country of your residence and you must physically be in that country to purchase.
From the itunes store terms of service:
"The Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the Service from outside these locations. Apple may use technologies to verify your compliance."
http://www.apple.com/legal/itunes/us/terms.html#SERVICE -
my ipod wont let me buy any appps because it says i have an invalid security code for my moms credit card but its the right one. and it also says i owe money for upgrading an app does anyone know how to remove my moms credit card cause i cant figure itout
To change asccount information see:
Changing Account Information
For the code issue this may help.
iTunes Store: My credit card's security code or zip code does not match my bank's records
For a standard iTunes account you need a valid payment method even for free apps and app updates.
What is making it think that you own money for an app upgrade? -
I'm trying to update my apps on my third generation Ipod but, I'm having some difficulty. I can't update my Ipod or apps via my laptop because it's broken. Itunes keeps saying that my security code for my card is wrong. I can't update my apps now or continue to play games. What do I do???
Perhaps this article can be of assistance.
iTunes Store: My credit card's security code or zip code does not match my bank's records
B-rock
Maybe you are looking for
-
How much data does AirPlay use?
Let's say one 90 min. movie streaming from my Mac to atv2. Any ideas aprox. How much Internet data that uses?
-
How do i shrink a picture i have already printed?
I printed off a picture and it is a little too large for what I need it for. I would like to shrink it slightly. I just installed the new 6500a plus printer. This question was solved. View Solution.
-
Hi, we try to pach a Sun Cluster environment: 2 Nodes, Solaris 10 and SC 3.2 We want to patch the systems in non cluster nodes, but during the patch, the system is rebooted and starts in cluster-mode. One workaround would be booting of one node in mu
-
IPod touch 4th generation..Facetime.
-
Hai forum is it possible to assign same credit limit to two altogether diffrent customers. if it is possible please let me know the scenerio. prasad