How to set columns for Zip Codes?

I am new to iMac and in my first week using trial version of Numbers. I work in sales and we do lots of mailings using merging of data and addresses for post cards, labels, etc.
I cannot see how to set columns to a zip code setting. All zips entered beginning with a 0 drop the front 0. I tried calling the column as Text, but it did not help. I can type a ' in from of the 0 and it works, but this takes an insane amount of time and will not work for us.
How do you deal with Zip Codes? Are there labeling options for mailing built into Numbers? I really want to dump all MS products but will have to drop mac and return buy Office if this is not correctable.
Thank you,
Brownie

Hello
Setting the column format to text do the trick on my french version too.
With AppleWorks, I was accustomed to use a zeroSlashed so it remained in my zip codes when I moved codes here and there.
Yvan KOENIG (from FRANCE jeudi 13 septembre 2007 17:44:38)

Similar Messages

Now sure how to set columns for this outcome?

I have table with two columns. One column is a HolidayCode column and ranges from H1-H20, the next column is the DateDeparted column.
The rules i want to apply are you cant have the same HolCode with the same DateDeparted e.g H1 - 12-Oct-2001, H1-12-Oct-2001.
However the same HolCode can be used again with a different date, and the same date can be used with different HolCode.
How do i make it so once an entry has been made it is unique and cant be entered again?
Thanks for your help!

Create [url http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/clauses002.htm#SQLRF01111]composite unique key on those columns.

Format column in Numbers for zip code

how do I get a leading zero for zip codes??

start by selecting the cell(s) yu want to format, then go to the Format menu and choose Create Custom Cell Format:
In the dialogue that opens:
Edit the name to reflect the use to which this format will be placed.
Leave the type as Numbers & Text
Note the example (orange circle) showing how a number will appear under the curent format.
Click the white triangle (see arrow) in the Integer tablet (red circle) to open the options menu.
Take three trips to the options menu:
Choose Hide Separator
Choose Show Zeros for Unused Digits
Choose Add Digit
Click OK to return to the document.
Note that this will work for the original five digit Zip codes. Extended five-four codes will be treated as text, as can be seen in the image above. and will not sort correctly (see column D of left table below). For correct sorting, format the column as text and enter the Zip codes including the leading zeros, as has been done in the single column on the right (before the column was sorted into the displayed order).
Regards,
Barry

How to set password for a zip file and should be checked when reading that

Hi friends,
how to set password for a zip file and should be checked when reading that file???
thanks.
Praveen Reddy.J

Heyy man, i think, u did not get my problem.
all i have to do is:
i have to create a zip file, and we should secure it with password when creating. and whenever the user wants to open that zip file he should provide correct passowrd otherwise he could not read that file. So, we should check for that also.
Tanks for reply.

HOW TO: set anchoredObjectSettings for .palce() object?

Hi, I'm currently working on interesting script for GREP placing, and I'm wondering how I can set anchoredObjectSettings for .palce() object?
for(i=0; i < found.length; i++)
    foundElem = new File (myFolder + "/" + found[i].contents);
    found[i].place(foundElem); // Placing Ancored Object
    // HERE IS WHERE I NEED SOME HELP: how to set "anchoredObjectSettings" for just placed Ancored Object
    //anchoredObjectSettings.anchoredPosition = AnchorPosition.ABOVE_LINE;
    //anchoredObjectSettings.horizontalAlignment = HorizontalAlignment.TEXT_ALIGN;
Here you can download example files - script, InDesign file and images, that should be placed into InDesign file with script
Dropbox - GREP placing.zip
PS: I believe this script will be very useful, so if anybody have any ideas/suggestions, and want to help me with further development - this would be great!

Hi Kai, this script is still under development, here is updated version attached (now it can also place files/images by file name only, without extension):
#target indesign;
//#include "! Basic functions.jsx"
    GREP place files.
    This script will ask to select source folder with files to place,
    and then, with dialog box (or prompt) [this is not implemented yet, so I use static GREP value while developing]
    will ask to type GREP find expresion to search for text placeholder, that need to be replaced with file from source folder we just selected.
    TODO: Check how it works with other than image formats
        Also, this might be usefull to make anchored frame with column widh, and fit image proportionally
scriptName = decodeURI(File(app.activeScript).name.slice(0, -4)); // detect name of current script without expression
function Alert(msg) // function for native-looking alerts
    w = new Window ("dialog", scriptName, undefined, {closeButton: true});
    w.preferredSize = [300,75]; // window width and height
    w.margins = 15; // window margins
    w.orientation = "column";
    w.alignChildren = ["left", "top"];
    w.add("statictext", undefined, msg);
    close = w.add ("button", [0,0,96,20], "OK", {name: "Ok"});
    close.alignment = ["right", "bottom"];
    close.onClick = function(){exit();}
    w.show();
main();
function main()
    app.scriptPreferences.userInteractionLevel = UserInteractionLevels.interactWithAll;
    if(app.documents.length == 0)
        Alert("No documents are open. Please open a document and try again."); exit();
    else
        //> START OF doUndoWraper
        if (parseFloat(app.version) < 6) // "app.version < 6" if it's running under an earlier version than CS4, as earlier versions don't support "Undo" in scripts
            doUndoWrapper();
        else
            app.doScript(doUndoWrapper, ScriptLanguage.JAVASCRIPT, undefined, UndoModes.ENTIRE_SCRIPT, scriptName);
        //< END OF doUnoWraper
function doUndoWrapper() // this is the wraper function UNDO everything script made by single undo
{// START OF doUndoWrapper
defaultGREPexpression = "(?i)^[a-z0-9 _-]+\\.\\w{2,4}$"; // Paragraph that starts with upper or lower case latin character, digits, spaces, hyphen or underscore, and ends with .extension
var myFilteredFiles;
var myExtensions = []; // initialize array
myExtensions.push(".jpg", ".jpeg", ".png", ".gif"); // raster images
myExtensions.push(".psd", ".tif", ".tiff", ".pdf"); // raster images (layered)
myExtensions.push(".ai", ".eps", ".svg", ".cdr"); // vector graphics
myExtensions.push(".mp3"); // audio files
myExtensions.push(".mp4"); // video files
myExtensions.push(".swf"); // flash files
myExtensions.push(".doc", ".docx", ".rtf", ".txt"); // text documents
myExtensions.push(".xls", ".xlsx"); // table documents
//Display the folder browser.
if(app.activeDocument.saved) // our document was saved before - we suggest to start search for source folder from were InDesign file saved
    var myFolder = Folder(app.activeDocument.filePath).selectDlg("Select the source folder with files for placing", "");
else // file was not saved before, so we don't know where to search > suggest to start from Desktop
    var myFolder = Folder.selectDialog("Select the source folder with files for placing", "");
if(myFolder) // if folder was selected
    //Get the path to the folder containing the files you want to place.
    var files = new Object(); // This will assoc array with FILE_NAME => FILE_EXTENSION
    if(File.fs == "Macintosh")
        myFilteredFiles = myMacOSFileFilter(myFolder);
    else
        myFilteredFiles = myWinOSFileFilter(myFolder);
    if(myFilteredFiles.length != 0) // success: we have found supported files to place
        for(i = 0; i < myFilteredFiles.length; i++)
            var filename = myFilteredFiles[i].fsName.toString().replace(/^.*[\\\/]/, ""); // now we get only file names with extenstions
            var file = [];
            file = filename.split("."); // separate file name from file extension
            files[file[0]] = file[1]; // write FILE_NAME => FILE_EXTENSION as assoc array
    else // error: There is no supported files for placing in specified folder
        Alert("ERROR: There is no supported files for placing in specified folder.");
        exit();
else // ERROR: we have not choose source folder
    Alert("Folder with source files was not specified"); exit();
//Windows version of the file filter.
function myWinOSFileFilter(myFolder)
var myFiles = new Array;
var myFilteredFiles = new Array;
for(myExtensionCounter = 0; myExtensionCounter < myExtensions.length; myExtensionCounter++)
        myExtension = myExtensions[myExtensionCounter];
        myFiles = myFolder.getFiles("*"+ myExtension);
if(myFiles.length != 0)
            for(var myFileCounter = 0; myFileCounter < myFiles.length; myFileCounter++)
myFilteredFiles.push(myFiles[myFileCounter]);
return myFilteredFiles;
function myMacOSFileFilter(myFolder)
var myFilteredFiles = myFolder.getFiles(myFileFilter);
return myFilteredFiles;
//Mac OS version of file filter
//Have to provide a separate version because not all Mac OS users use file extensions and/or file extensions are sometimes hidden by the Finder.
function myFileFilter(myFile)
    var myFileType = myFile.type;
    switch (myFileType)
        case "JPEG":
        case "EPSF":
        case "PICT":
        case "TIFF":
        case "8BPS":
        case "GIFf":
        case "PDF ":
            return true;
            break;
        default:
        for(var myCounter = 0; myCounter<myExtensions.length; myCounter++)
            var myExtension = myExtensions[myCounter];
            if(myFile.name.indexOf(myExtension)>-1)
                return true;
                break;
return false;
//> START OF GREP expression dialog
w = new Window ("dialog", scriptName+": specify expression", undefined, {closeButton: true});
w.preferredSize = [300,75]; // window width and height
w.margins = 15; // window margins
w.orientation = "column";
w.alignChildren = ["left", "top"];
panel = w.add("panel", undefined, "Find what: (GREP expression)");
if(app.findGrepPreferences.findWhat != "")
    grepExpression = app.findGrepPreferences.findWhat;
    clearFindWhat = false;
else
    grepExpression = defaultGREPexpression; // use default GREP expression
    //fgrepExpression = "\\[.+\\]"; // \\< means "begining of the world", and \\> means end of the world;
    clearFindWhat = true;
var grepExpression = panel.add ("edittext", [0,0,270,20], grepExpression);
grepExpression.active = true;
panel.add("statictext", undefined, "GREP expression no need for for double \\\\ escaping");
ok = w.add ("button", [0,0,96,20], "Continue", {name: "Ok"});
ok.alignment = ["right", "bottom"];
ok.onClick = function()
    findWhat = grepExpression.text;
    w.hide();
w.show();
//< END OF GREP expression dialog
if(typeof findWhat !== "undefined") // check we have not left GREP expression field empy
    app.findGrepPreferences.findWhat = findWhat; // our GREP that search for image placeholder text;
    found = app.activeDocument.findGrep();
    for(i=0; i < found.length; i++)
        if(found[i].contents.indexOf(".") > -1) // we wroking with file name with extension
            foundElem = new File (myFolder + "/" + found[i].contents);
        else // we work with file name only, so we need to add file extension manually
            found[i].contents = found[i].contents.replace(/[^a-z0-9 _-]/gi, ""); // remove all unwanted characters from file name: only letters, numbers, spcaces, minus and underscores allowed
            foundElem = new File (myFolder + "/" + found[i].contents + "." + files[found[i].contents]);
      try
            placedObj = found[i].place(foundElem)[0].parent; // THANKS TO: Jump_Over for help @ https://forums.adobe.com/message/6912489#6912489
            placedObj.anchoredObjectSettings.anchoredPosition = AnchorPosition.ABOVE_LINE;
            placedObj.anchoredObjectSettings.horizontalAlignment = HorizontalAlignment.TEXT_ALIGN;
            placedObj.frameFittingOptions.autoFit = true;
            placedObj.frameFittingOptions.fittingOnEmptyFrame = EmptyFrameFittingOptions.FILL_PROPORTIONALLY;
            placedObj.frameFittingOptions.fittingAlignment = AnchorPoint.CENTER_ANCHOR;
        catch(e)
            Alert(e);
    app.changeGrepPreferences.changeTo = "";
    app.activeDocument.changeGrep();
    if(clearFindWhat) // clearing only if typed GREP expression manually
        app.findGrepPreferences = app.changeGrepPreferences = null; // clear Find/Change preferences once we finished
else
    Alert("Find what GREP expression was not specified"); exit();
}// END OF doUndoWrapper
Top part with Windows/Mac filtering was copy-pasted from default InDeign script "ImageCatalog.jsx" as example and modified - I'm not sure if all this stuff is needed, I haven't test if it works the same without those filtering on both OS - if that's not needed - then thanks for tip!
PS: in your findWhat \l{3,4} will not catch .ai files
and what means .source at the end? is that doing necessary escaping, so with it it's posible to write \l instead of \\l

How to set value for trim and bleed using jsx script?

I have tried using bleedoffsetRect but somehow it is not working. Can anybody please help me on how to set value for trim and bleed using jsx script? Any example will be highly appreciated.
Following is the code I am trying with:
var _saveName = new File ( root_path +_strFileName+".pdf");
    var _saveOpts = new PDFSaveOptions();
    _saveOpts.printerResolution = 300;
    var bleedarray = new Array();
     bleedarray[0] =9.00;
     bleedarray[1]=9.00;
     bleedarray[2]=9.00;
     bleedarray[3]=9.00;
    _saveOpts.bleedOffsetRect = bleedarray;

I would expect although I've not actually tried this for the bleed off set box to be larger than the artbaord and the first two values to be negative or 0…
var bleedarray = new Array(-9,-9,artboard.width+9,artboard.height+9);
Where 'artboard.width' & 'artboard.height' you will have calculated from your file. An Array(9,9,9,9); would not constitute any boxes bounds.

How to set color for a tabstrip in BSP

Hello all,
Can anyone please let me know how to set color for a tabstripn in BSP?
I am using the below syntax but it still gives me the default color.
<htmlb:content design="design2003" >
<htmlb:page title="test " >
    <htmlb:form>
<htmlb:tabStrip id         = "TabStrip"
                      bodyHeight = "200"
                      bodyColor = "red"
                      width      = "700" >
</htmlb:tabStrip>
</htmlb:form>
</htmlb:page>
</htmlb:content>
Thanks,
Sandeep

Hi...
The below code is working fine for me...
<%@page language="abap" %>
<%@extension name="htmlb" prefix="htmlb" %>
<htmlb:content design="design2003" >
<htmlb:page title="stg " >
    <htmlb:form>
      <htmlb:tabStrip width      = "430"
                      bodyColor = "rgb(88,5,64)"
                      id         = "t1"
                      bodyHeight = "112" >
        <htmlb:tabStripItem id      = "t1"
                            index   = "1"
                            title   = "Sales"
                            tooltip = "My Tooltip for Tab 1" >
          <htmlb:textView text="Tab N 1" />
          <htmlb:tree id        = "treeReports"
                      showTitle = "true"
                      table2    = "<%= mt_nodes %>"
                      title     = "Menu"
                      width     = "100%" />
        </htmlb:tabStripItem>
        <htmlb:tabStripItem id      = "t2"
                            index   = "2"
                            title   = "Production"
                            tooltip = "My Tooltip for Tab 2" >
          <htmlb:textView text="Tab N 2" />
        </htmlb:tabStripItem>
      </htmlb:tabStrip>
    </htmlb:form>
</htmlb:page>
</htmlb:content>

How to set column width in alvgrid

hi
how to set column width in alvgrid.
thanks.

Hi,
Check this,
REPORT ztest.
DATA: BEGIN OF i_scarr_tab OCCURS 0.
        INCLUDE STRUCTURE scarr.
DATA: END OF i_scarr_tab.
DATA: i_scarr LIKE TABLE OF i_scarr_tab WITH HEADER LINE,
      w_scarr LIKE LINE OF i_scarr_tab.
DATA: o_grid      TYPE REF TO cl_gui_alv_grid,
      o_container TYPE REF TO cl_gui_custom_container.
DATA: lt_fcat     TYPE lvc_t_fcat,
      ls_layo     TYPE lvc_s_layo,
      ls_sort     TYPE lvc_s_sort,
      lt_sort     TYPE lvc_t_sort,
      ls_fieldcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
START-OF-SELECTION.
CALL SCREEN 9000.
*&      Module status_9000 OUTPUT
      text
MODULE status_9000 OUTPUT.
SET PF-STATUS '9000'.
SET TITLEBAR '9000'.
ENDMODULE.                 " status_9000 OUTPUT
*&      Module user_command_9000 INPUT
      text
MODULE user_command_9000 INPUT.
CASE sy-ucomm .
    WHEN 'BACK' OR 'EXIT'.
      SET SCREEN 0.
      LEAVE SCREEN.
ENDCASE.
ENDMODULE.                 " user_command_9000 INPUT
*&      Module init_9000 OUTPUT
      text
MODULE init_9000 OUTPUT.
IF o_container IS INITIAL.
    SELECT * FROM scarr INTO CORRESPONDING FIELDS OF TABLE
       i_scarr UP TO 100 ROWS.
    IF cl_gui_alv_grid=>offline( ) IS INITIAL.
Create a custom container control for ALV Control
      CREATE OBJECT o_container
          EXPORTING
              container_name = 'CONTROL'.
Create a ALV Control
      CREATE OBJECT o_grid
          EXPORTING i_parent = o_container.
      PERFORM build_field_catalgue.
      ls_layo-sel_mode = 'A'.
      CALL METHOD o_grid->set_table_for_first_display
        EXPORTING
          i_save          = 'A'
          i_default       = 'X'
          is_layout       = ls_layo
        CHANGING
          it_outtab       = i_scarr[]
          it_fieldcatalog = lt_fcat
          it_sort         = lt_sort[].
    ENDIF.
ENDIF.
ENDMODULE.                 " init_9000 OUTPUT
*&      Form build_field_catalgue
      text
--> p1        text
<-- p2        text
FORM build_field_catalgue .
DATA: ls_fcat TYPE lvc_s_fcat.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
      i_program_name         = sy-cprog
      i_internal_tabname     = 'I_SCARR_TAB'
      i_structure_name       = 'SCARR'
     i_client_never_display = 'X'
    CHANGING
      ct_fieldcat            = ls_fieldcat[]
    EXCEPTIONS
      inconsistent_interface = 1
      program_error          = 2
      OTHERS                 = 3.
IF sy-subrc <> 0.
    MESSAGE 'FCAT Error' TYPE 'I'.
    EXIT.
ENDIF.
LOOP AT ls_fieldcat.
    CLEAR ls_fcat.
    ls_fcat-fieldname = ls_fieldcat-fieldname.     "Fieldname
    ls_fcat-ref_table = ls_fieldcat-tabname.       "DDIC ref struct
    ls_fcat-inttype   = ls_fieldcat-inttype.       "Data type
    ls_fcat-outputlen = ls_fieldcat-outputlen.     "Column width
    ls_fcat-coltext   = ls_fieldcat-seltext_m.     "Column Header
    ls_fcat-seltext   = ls_fieldcat-seltext_m.     "Column Desc
    ls_fcat-ref_field = ls_fieldcat-ref_fieldname. "Reference field
    ls_fcat-ref_table = ls_fieldcat-ref_tabname.   "Reference table
    CASE ls_fieldcat-fieldname.
      WHEN 'LUGGWEIGHT' OR 'FORCURAM'.
        ls_fcat-edit      = 'X'.
        ls_fcat-do_sum    = 'X'.
      WHEN 'URL'.
        ls_fcat-no_out = 'X'.
      WHEN OTHERS.
        ls_fcat-edit      = ' '.
        ls_fcat-do_sum    = ' '.
    ENDCASE.
    APPEND ls_fcat TO lt_fcat.
ENDLOOP.
ENDFORM.                    " build_field_catalgue
check the programs bcalv_grid*.
check this link for more detailed example.
http://www.supinfo-projects.com/fr/2005/alv_display_fr/2/
Regards
Sruthi

How to set registry for sql client on win...

Hi.
how to set registry for sql client on win fro work with Ukranine
charset.
I got such problem
nls_language set to American_Ukranine.clmswin1251 on client
this give me ukraniane char.
but it override all my settings in initsid.ora this mean
nls_date_format=DD-MON-YYYY
nls_date_languages
twhen I type select sysdate vrom dual answer is 11-jun-99, but
not 11-(ukr month)-1999;
What should I correct in regestry? ( i don't like to do alter
session set..... each time I start sqlplus )
Thank You in advice
null

you can create method on Application Module and to Client listener
like
    public Object[] getData(Number n,Date d)
Object val[]= new Object[2];
String sp = "{? = call get_data(?,?,?)}";
            Connection conn = null;
            CallableStatement proc = null;
            try {
             //   conn = isConnSupplied ? userConn : ResourceManager.getConnection();
                proc = getDBTransaction().createCallableStatement(sp,0);
            proc.registerOutParameter(1, OracleTypes.Number);
            proc.setObject(2,12);
           proc.setObject(3,dateobj);
          proc.registerOutParameter(2, OracleTypes.VARCHAR);
            proc.executeQuery();
             int amttext= proc.getInt(1); //for return value
String msg=proc.getString(2);//for out param
val[0]=amttext;
val[1]=msg;
            catch(Exception e)
                System.out.println(e);
return val;
}and access this method from backing bean using following code-
            BindingContext bindingctx=BindingContext.getCurrent();
               BindingContainer binding=bindingctx.getCurrentBindingsEntry();
            OperationBinding operationBinding1 = binding.getOperationBinding("getData");
            operationBinding1.getParamsMap().put("n",anyno);
            operationBinding1.getParamsMap().put("d",dateobj);
            operationBinding1.execute();
            String vval[] =(String[])operationBinding1.getResult();

How to set Classpath for MySQL

Hi
I want to connect to my mySQL db with a java program , but I don't know how to install the mySQL connector driver. Can anyone help me? or indicate somewhere where I might find the answer?
And how to set Classpath for MySQL.
my program gives an exception ClassNotFound.
Exception :com.mysql.jdbc.Driver
java.lang.ClassNotFoundException: com.mysql.jdbc.Driver
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at Files.main(Files.java:352)
Plz help me
Thanx
Lalit

to make your life easy i tried to connect..
what you have to do is.. you mysql database server should be running
next you have to download one of the version of mysql driver.. i downloaded mysql-connector-java-5.0.5
go to my computer right click - >advance tab -> click on environment variable -> put you path e.g. C:\Program Files\Java\jarFiles\mysql-connector-java-5.0.5\mysql-connector-java-5.0.5-bin.jar
into your classpath in a user variable section..
Try this code
import java.sql.*;
public class MySqlConnect{
     public static void main(String [] args){
          try{
               Class.forName("com.mysql.jdbc.Driver");
               String url ="jdbc:mysql://localhost:3306/test";
               Connection con =DriverManager.getConnection(url,"root", "password");
               System.out.println("Connection: " + con);
          }catch(ClassNotFoundException cnfe){
               cnfe.printStackTrace();
          }catch(SQLException se){
               se.printStackTrace();
}have fun
Gurnah

How to set View for Completed items inside Tasks?

How to set button for 'View' and see Completed items or not completed inside Tasks?

Hi,
You want to set custom views for Tasks folder so that when we click a view button, it will show all Completed or incomplete tasks, am I correct?
Which version of Outlook are you using? There are existing views for completed/incomplete tasks in Outlook. In Outlook 2010 and Outlook 2013, we can find the buttons under View tab > Change View. Click Completed button to view all completed
tasks; Click Active button to view incomplete tasks.
In Outlook 2007, just click View > Current View to switch between different views.
If I've misunderstood something, please feel free to let me know.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to set password for BPEL domain

Hi,
I am new to SOA.
I want to setup client-server environment for few developers.
I installed SOA 10.1.3.3 in the server machine.
And I created few domains in BPEL, one for each developer.
It didn't ask me to set the password while creation of the domain.
Please let me know how to set password for newly created domain so that each developer login to his/her own domain and manage processes.
Thanks!!!

Thanks for the prompt response.
What roles should I give to my developers to allow them to manage their services in ESB control, BPEL control, WSM control.
And I would like to know how to set the password for a BPEL domain too.
Message was edited by:
user644377

How to set password for every application

Hi,
As a administrator how to set password for every weblication in sharepoint 2013.
Is there any way to set?
Thanks,

Who's password are you trying to set? Please provide more details.

How to set password for Local are connection?

How to set password for Local are connection?

do you mean the 802.1x authentication?
check out links below:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2950/software/release/12-1_9_ea1/configuration/guide/scg/Sw8021x.html
http://technet.microsoft.com/en-us/network/bb545365.aspx
Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
IT Stuff Quick Bytes

Pass URL parameter for zip code

In this fake url I want to pass the zip code value of the confirmed BP into "zipcode"
https://acme.com/locator.jsp?zip=zipcode
from the other post I have read the parameter name would be "zipcode" and thru the transaction launcher I am able to assign parameter value =
//selectedClmBpLinkRelationship/BpRelLinkBusinessPartner/BuilStandardAddressRel/POSTL_COD1
The transaction launcher is opening the launcher but not passing the value into the field. The window opens but the field is not filled with the zip code.
If I open a new ie browser and put in url
https://acme.com/locator.jsp?zip=60001
the url is reached and 60001 is filling the zip code field.
Is there an easy way to debug and see if any value is getting passed?
Am I conceptually on base for what I am trying to do?

Hi Shwetha,
That got me pointed in the right direction where we could get it to work.
For others, these were some other points we used to get it to work.
1. in the IMG where the url is defined don't add the ZIP parameter here so our IMG entry = https://acme.com/locator.jsp?
when the page launched correctly the parameters showed https://acme.com/locator.jsp?&zipcode=60001
2. for zip code parameter value we used //currentCustomer/BuilStandardAddressRel/POSTL_COD1 >> this goes in the transaction launcher with parameter zipcode and is then visible in the IMG entry "copy/delete launch transactions"

How to set columns for Zip Codes?

Similar Messages

Maybe you are looking for