Barcode 3 of 9 size

I did a search on this, but need some more detail. I know there's no real way to resize these, but is there a way to overlay a label or something over top of the barcode to cut it in half (shorten the height)?
Thanks in advance!

I'm not sure I understand what you are objecting to because there are 4 different sizes available (large, medium, small, compressed). At least there is in version 5.6 of the software. The large is just under 5/8 inch high, medium is just over 3/8 inch, small is 5/16 inch and compressed is 1/4 inch. At least that is what my HP printer produces.
Even though I don't understand the problem, I see two possibilities:
1) Create a blank graphic and overlay the barcode. Whoops. I just tested this and the software puts the graphic behind the barcode. This results in not wiping out any of the barcode. That leaves you with one possibility.
2) There are a number of "barcode.*" & "barcodex.*" files in the 'config' folder. They appear to correspond with the various presentment target printer types. These can all be editted with a text editor such as Notepad. If you locate the one for your printer you will find a "BarcodeHeight" parameter for the various barcodes. The values appear to be in 1/1000th of an inch (.250). Reducing the value should reduce the height. Once you have modified the barcode from the "standard" you need to check that whatever scanner is going to read it, can do so.

Similar Messages

  • Crystal Report Print report on different paper size (A4/Letter)

    I develop the crystal report 2008 with VS.net 2008. The report runs on web.
    when I preview or debug with VS on my local computer, the crystal report using A4 (8.3 * 11.7 in), Which is correct.
    However, after I deploy the program to the server, and try view and print report through IE, the print out is actually using Letter size (8.5 * 11 in).
    Both on my local computer and the server, the default printer is set to A4 size. And on the crystal report, in the printer setup, the paper size is A4 as well.
    I try on firefox, and safari. No luck. Same as IE.
    The crystal report need to print barcode, and the paper size must be A4, cuz the barcode page is designed and printed on A4 Avery Laser Barcode sheet.
    I tried on my PC by using remote server data souce, the printing works perfectly in A4 size (8.3"*11.7").
    And I don't know why same program after deploy to the server, then it using Letter size (8.5" * 11"), which the size I never set to.
    So strange.
    Thanks

    A few ideas \ suggestions:
    1) Make sure you are using FP 3.3 runtime:
    https://smpdl.sap-ag.de/~sapidp/012002523100016807202010E/cr2008fp33_redist.zip
    2) Try a simple win app - use saved data report (crystalreportviewer1.reportsource = <path to saved data report>). Does this print correctly?
    3) What print mode are you using; PDF or ActiveX?
    4) Try export to RPT and PDF from your web app. Does it export correctly?
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

  • Crystal Report Viewer (SmartViewerActiveX/ActiveXViewer) barcode problem

    I am using the crystal reports viewer to show my reports in my asp website.
    In the reports, I have a barcode using the font source IDAutomationHC39M.ttf.
    This code must be a certain size that I indicated in my report design.
    The problem is that the viewer appears in the browser with the barcode expanded to full size, and not with the size that I indicated in report design.
    If I print from the program Crystal Reports, it appears according to the size indicated.
    It seems that this is a problem of the Viewer in the browser.
    Someone can help me? this matter is very urgent.
    Thank you.

    Thread moved to the .NET - SAP Crystal Reports forum.
    A few details missing:
    1) Version of CR?
    2) CR updates applied?
    3) Version of .NET?
    4) OS?
    5) What browser and version?
    6) is the issue present on dev / deployed computer / both?
    Oh, BTW.; if this is urgent, consider creating a phone case here:
    http://store.businessobjects.com/store/bobjamer/en_US/pd/productID.98078100?resid=S6I@hgoHAkEAAGsiyVkAAAAR&rests=1282226845369
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]
    Edited by: Ludek Uher on Feb 3, 2012 10:26 AM

  • Printing a barcode font no longer works properly

    I have been using a true type font "3 of 9 barcode" to print mailing labels on an internal website using the following css for some time:
    .barcode { font-family: "3 of 9 Barcode", Times, serif; font-size:36px; }
    After upgrading to Firefox 5 it stopped working. This currently renders the font correctly on the page but when I try to print the page it uses Wingdings. This is happening on multiple computers and multiple printers. The font is installed on all the computers and I've even tried using @font-face with no success.
    [http://www.thomaspainerants.com/firefox_barcode_works.png Screenshot of Firefox properly rendering the barcdoe font.]
    [http://www.thomaspainerants.com/firefox_barcode_broken.png What happens when I try to print]. In this case I printed to PDF but the same thing happens when printing to a normal printer. Printing in the latest versions of Chrome & IE9 works properly though not in Safari.
    [http://www.thomaspainerants.com/3_OF_9_BARCODE.TTF 3 of 9 Barcode font]

    Abandon all hope yee who enter this thread. Abandon hope for mozilla fixing the issue that is. I went with a jQuery based bmp generator. It's pretty easy to implement and has worked well for me.
    download: http://code.google.com/p/jquery-barcode/downloads/detail?name=jquery.barcode.0.3.js&can=2&q=
    demo : http://jquery-barcode.googlecode.com/svn/trunk/jquery-barcode/demo/demo.html
    Implementation:
    Put these includes in your header:
    &lt;script type=&quot;text/javascript&quot; src=&quot;http://ajax.googleapis.com/ajax/libs/jquery/1.2.6/jquery.min.js&quot;&gt;&lt;/script&gt;
    &lt;script type=&quot;text/javascript&quot; src=&quot;js/jquery.barcode.0.3.js&quot;&gt;&lt;/script&gt;
    Everything that needs to be a barcode should have the same class. I chose &quot;barcode39&quot;.
    &lt;span class=&quot;barcode39&quot;&gt;405479&lt;/span&gt;
    &lt;span class=&quot;barcode39&quot;&gt;405339&lt;/span&gt;
    &lt;span class=&quot;barcode39&quot;&gt;405341&lt;/span&gt;
    Then run this script at the bottom:
    &lt;script&gt;
    $(&#39;.barcode39&#39;) .barcode({code:&#39;code39&#39;});
    &lt;/script&gt;

  • Reg. barcode printing in adobe form

    Hi experts,
          I want to display barcode in adobe form.
    I am using code128 standard barcode.
    My requirement is to display the humanreadable format in barcode(text that displays with barcode) with 16 font size and
    it should have format DTAPxxxxxxxxxx.i.e DTAP should be the prefix and remaining should be dynamic.
    However i didnt find any option in adobe form to the same.
    Request you all to tell me the solution for this problem..
    Thanks in advance,
    Swathi..

    Hi,
    Declare a variable of character type and concatenate DTAP and Bar code value into that variable.
    Later print that in required bar code format.
    Try this.

  • Barcode growing vertically till the top of page

    Hi
    we are using barcode in our form , and i had place a barcode field
    with 3x9 medium, and the forn tid arial 10 and width is 20, when i test presentment it through the designer on my local it showing up fine , (i mean regular size), but when we are testing it through the server (after running a batch) the result pdf has the barcode grow big in size almost vertically the entire page.but when i use the .dat generated by batch and test it in local with designer it works fine.
    any changes to be taken care on server side or designer side..?
    Thank you all

    Hi all,
    i have noticed that my testpresentment option on my designer has
    -advglobal:pagecount=8 (believe its hardcoded), but when i remove this option and test my template locally it shows the barcode on the entire page just as it shoed when it came through the jfmerge.
    so i believe this has (-advglobal:pagecount=8) to do something with this behaviour.
    and my dat at top looks as below
    ^job "CN.mdf" -axx"JFMERGE" -z"\\PWISCHZ03128\apps\mci\application\batch\devl\Correspondence\data\COR_32819.pdf" -afp"\\pwissatrpt02\Apps\MCI\DEV\Adobe\SARLIN\Mdf\" -aduon -afxon
    can somebody help me out on this..?
    Thanks

  • Smartforms layout printing diffrent in diffrent printer

    Hi,
    I have a layout designed in Smartforms. Till now it was printing fine from a specific printer but when using diffrent printer it is not printing well. Major issues are:barcode not showing, Font size is bit smaller & some text from the right hand side is missing. Is there any printer issue we need to fix or do i need to design diffrent layout for this printer? Please advise.
    Rgds
    Sid

    We are having a similar problem with SMARTFORMS for 1099 called IDWTCERT_US_1099MISC.  We noticed that the print preview after testing the 1099 and the print preview from the SPOOL (trx SP01) shows the 1099 form OK, but printing it out cuts off the right side of the form/image.
    There are two things we've tried so far:
    1) In SPAD, we have adjusted in the Output Attributes Tab of the DEVICE the area called Additional SAPScript and Smart Form Information.  Here, the horizontal move can be entered as a -10 (in millimeters) for instance.
    This didn't work for us, as it only shifted the truncated image to the left 1 CM.
    2) Before printing from the spool in SP01 we changed the printer from the device type to be LOCL.  This worked well, but we are not sure that it will work well when they print the 1099s in the production run.
    I'd love to get some more feedback on this issue to see if using LOCL is the best way to do this, or if I can shift the background image or something.  Shifting the background image would be difficult, however, not to mention it would make all the SMARTFORM fields on the 1099 print in the wrong spot.
    Further ideas?
    Jeremy

  • Multi Language issue with Invoice Printing

    I have a Custom Report for Invoice. Now it has been associated to a Concurrent Program and if I submit the request through SRS, I am able to see Report output.
    Same report I have associated to iReceivables application and invoke it from there (using custom PL/SQL APIs). On invoking the procedure with the same same parameter list as in the first case, I donot get any output.
    I have tried to see the log. The obvious difference I noticed is that on being submitted though the SRS, the NLS function returns a different Language code than when we see the request log of the case when it is being submitted through iReceivables.
    Any clues can be really helpful.
    Thanks
    Sumit

    First goto se73 and click on system barcode > then search for ur barcode name. if the barcode is a standard one, copy it into ur Z  barcode and increase the size of barcode and then test it. As chinese character's are 2-byte so probably the barcode length is small.
    regards
    Arun Kumar

  • How to change the size of barcode

    Hi Gurus,
    I need to print barcode on my smartform. I have created my own barcode using se73 transaction and assign it to character format in my style. But barcode on print is very small (about 6 cm x 1 cm) I need to have the barcode much bigger(about 10 cm x 4 cm).
    Where  can I maintain barcode size?
    Thanks&regards,
    Jirka Faltin

    hi,
    check this thread
    Re: Increase the size of the Barcode output on the printed SAP Script
    hope it works
    thanks
    Sachin

  • How to reduce the barcode size

    hi
    How to reduce the barcode size in smartforms
    Thanks & Regards
    krishna rao

    Hai,
    Go to se73
    select system barcodes radi button
    click change button
    it wil moves to another screen .In that screen it wil show all Bar codes.
    select u r barcode from the list  click and change button.
    in this way u wil change barcode size.
    Reagards.
    kishore ale

  • Barcode size problem in different adobe reader versions

    Hi,
    In one of my requirements of Adobe form, I am displaying barcode for a value. The problem is of size of barcode which varies on different machines based on Adobe Reader version.
    On one machine 'Adobe Reader' version 9.4.0 is installed and on other machine 'Adobe Reader X' version 10.0.1 is installed. The barcode is displayed in correct size in version 10.0.1 while only half barcode is displayed in version 9.4.0 when value of the property 'Data length' is set to 10 (which is default).
    If I set the value of same property to 26 in order to fit the barcode in specified space in version 9.4.0, same barcode is displayed in half size in version 10.0.1.
    Kindly give suggestions.
    Regards.

    You cannot use Reader X until it has been installed. Installing means that the appropriate configuration has been entered into the Windows Registry. Copying a folder from another computer doesn't achieve that goal.
    Here's what I suggest you do now.
    Run this Microsoft fix first of all: http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Uninstall via Reader via Add/Remove Programs
    Download and install Reader X from here: http://get.adobe.com/reader/direct/
    P.S. There are some programs which are so called 'Standalone' apps. That means that the executable will run without using a system's processes. But Adobe Reader isn't one of them.

  • How do I re-size and print a barcode in Adobe Illustrator?

    I know this is a very, very simple thing to do, however I have no experience in AI.  My barcode vendor generated barcode files that were in AI, so I have no choice but to work from them (I think.  I can choose from several file types but I chose jpeg and it generated the images in AI)  I need to re-size the barcode to fit a very small label: 1/2" X 3/4"- Avery 5418. 
    Please help.   Thanks

    Jane,
    You need to create vector artwork to create and adapt/resize/edit barcodes properly.
    You may have a look at the Illustrator forum where we have quite a few threads about different aspects of the subject.
    Illustrator
    You may type in barcode in the box called Type to filter by text and wait for the relevant ones to turn up. I have done it here:
    Illustrator
    This should show a number of threads, such as this one;
    I am having trouble with scaling strokes in Illustrator CC 2014.
    if you need help, I believe it is best to start a new one there.

  • How to make Barcode Size double.

    Hi,
    I need to print Barcode with double size to existing Size.
    In SE71, in Character Formats, There is no Size Specification is there. Cient requirement is to make the Barcode Double.
    We are using RSNUM Barcode. In SE73, SAP is not allowing to create a new barcode or change the existing Barcode.
    How can we make the BARCODE size double. What are the prerequisites that needs to be considered.
    Thanks & Regards
    Sathish Kumar.

    Hi
    Sathish,
    Do like below .
    GO to Tcode SE73
    Choose System Bar Code and press Change
    Form the list choose your Barcode.
    Double Click on it..Pop Up will show the existing Dimensions
    Change them as per ur need ( Height and width will be available )
    It needsTR ..Save
    And job is done ,
    Hope it Helps.
    Praveen

  • Can you change the size of "Code QR" barcode?

    Hi all,
    The "Code QR" type barcode that is available by default in our system works fine, but creates a very small image that I would like to enlarge. The Objects Field properties list only contains a property called "Data Length = 10" (which I also do not know what it does? I tried changing it to 40 and it did nothing!).
    Is there a way to change the size at which a QR type barcode will be printed? I know size is related to the amount of information being encoded, but I'd like to enlarge the basic resolution of the image as well...
    Thanks in advance,
    N

    Yes. Duplicate your book first in case of issues with text reflow ( depress the command key and press d to duplicate) then select the book, click on themes and choose the same theme and the new size
    LN

  • Printing barcode numbers: size changes when printed through different ways

    Hello friends at www.oracle.com ,
    here we have a Reports program that uses 3of9.ttf barcode font.
    When barcode numbers are printed directly through Reports, size is correct - however, if the same Reports is called through a Forms program (that is, called through RUN_PRODUCT Forms built-in), size is printed wrong.
    I'm relating Forms and Reports version numbers and products below, as taken from Help/About option - I think this might help, since maybe it could be a bug from a previous version.
    Forms version numbers are related below.
    Forms [32 Bit] Version 6.0.5.0.2 (Production)
    Oracle8i Release 8.1.5.0.6 - Production
    PL/SQL Release 8.1.5.0.6 - Production
    Oracle Toolkit Version 6.0.5.6.0 (Production)
    PL/SQL Version 8.0.5.1.0 (Production)
    Oracle Procedure Builder V6.0.5.0.0 - Production
    PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
    Oracle Query Builder 6.0.5.6.0 - Production
    Oracle Virtual Graphics System Version 6.0.5.5.0 (Beta)
    Oracle Tools GUI Utilities Version 6.0.5.0.0 (Production)
    Oracle Multimedia Version 6.0.5.0.0 (Production)
    Oracle Tools Integration Version 6.0.5.5.0 (Production)
    Oracle Tools Common Area Version 6.0.5.4.0
    Oracle CORE Version 4.0.5.0.0 - Production
    Reports version numbers are described below.
    Report Builder 6.0.5.28.0
    ORACLE Server Release 8.0.5.1.0
    Oracle Procedure Builder 6.0.5.0.0
    Oracle ORACLE PL/SQL V8.0.5.1.0 - Production
    Oracle CORE Version 4.0.5.0.0 - Production
    Oracle Tools Integration Services 6.0.5.5.0
    Oracle Tools Common Area 6.0.5.4.0
    Oracle Toolkit 2 for Windows 32-bit platforms 6.0.5.6.0
    Resource Object Store 6.0.5.0.0
    Oracle Help 6.0.5.6.0
    Oracle Sqlmgr 6.0.5.24.0
    Oracle Query Builder 6.0.5.6.0 - Production
    PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
    Oracle ZRC 6.0.5.24.0
    Oracle Virtual Graphics System 6.0.5.5
    Oracle Image 6.0.5.0.0
    Oracle Multimedia Widget 6.0.5.0.0
    Oracle Tools GUI Utilities 6.0.5.0.0
    Thanks for helping, and best regards,
    Franklin Goncalves Jr.

    Could anyone please help me?
    Franklin Goncalves Jr.

Maybe you are looking for

  • User Name in a background job

    Hello All, I am running a report in background that creates data in IT0105. This table has a field "UNAME". When I run it in foreground this field takes up the id from which I am logged in. The program doesn't complete in background because it has a

  • I am unable to update my Creative Cloud.

    The Creative Cloud Icon is gray and the Adobe Updater pulls up an empty Creative Cloud list. Please help!

  • CROSSTAB from an XML file with iReport / Jasper Report

    Hi all, I need to create a report using crosstab with an XML file. The iReport guide doesn't answer to my problem. The XML file contents one tag called "HEADERS" with "NAME-HEADERS" corresponding to all column names and different tags called "LINE-DA

  • Which cleaning product to clean behind the glossy panel?

    Hello. I have the gradient issue again but this time I can't get the inside of the screen clean. The yellow/grayish tint on the left side of the screen certainly is dirt becuase if I turn off the iMac and shine a light on the screen, I see white dust

  • Launching Photoshop CS6 when you have an active subscription to Creative Cloud

    What is the proper sequence of steps when you launch Photoshop CS6 and you are a subscriber to Adobe Creative Cloud.  I don't believe my software is taking me down the right path as it continues to ask if I want to end the trial.