Multi Language issue with Invoice Printing
I have a Custom Report for Invoice. Now it has been associated to a Concurrent Program and if I submit the request through SRS, I am able to see Report output.
Same report I have associated to iReceivables application and invoke it from there (using custom PL/SQL APIs). On invoking the procedure with the same same parameter list as in the first case, I donot get any output.
I have tried to see the log. The obvious difference I noticed is that on being submitted though the SRS, the NLS function returns a different Language code than when we see the request log of the case when it is being submitted through iReceivables.
Any clues can be really helpful.
Thanks
Sumit
First goto se73 and click on system barcode > then search for ur barcode name. if the barcode is a standard one, copy it into ur Z barcode and increase the size of barcode and then test it. As chinese character's are 2-byte so probably the barcode length is small.
regards
Arun Kumar
Similar Messages
-
Open port issues with Direct Print functionality
Hi, I have been fighting with HP call support about the Photosmart 7525 printer.
Originally I setup and had performed all the functions to enable both web support and WIFI.
Within an hour the printer would not respond to wireless communication, though it had its wireless indecator showing it was connected.
I was told by HP support that the issue will be resolved in March, as there will be a firmware update to fix the issue.
Now that I had the printer install the new firmware I still get the issue.
Though I found through some sniffing, that there are a number of ports enabled and open that are over and beyond print requirements.
Funny thing I can send my printer into instant lockup with all lights flashing with a simple UDP ping sniff. I would think I can do this with other new HP printers using Eprint functions. I will find HP web based printers that are open for public printing and test my theory that HP Eprinters are open to hacking and denyal of service attempts. My Hp print app on andriod list three in my area, and one is at my local Walmart. This would be cool to find this, as I am usually not the first to point such matters out.
I assume some are for Apple devices to print.
Here is my sniffing report:
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 07:57 Central Daylight TimeNSE: Loaded 110 scripts for scanning.NSE: Script Pre-scanning.Initiating ARP Ping Scan at 07:57Scanning 192.168.223.1 [1 port]Completed ARP Ping Scan at 07:57, 0.23s elapsed (1 total hosts)Initiating Parallel DNS resolution of 1 host. at 07:57Completed Parallel DNS resolution of 1 host. at 07:58, 16.50s elapsedInitiating SYN Stealth Scan at 07:58Scanning 192.168.223.1 [1000 ports]Discovered open port 445/tcp on 192.168.223.1Discovered open port 139/tcp on 192.168.223.1Discovered open port 80/tcp on 192.168.223.1Discovered open port 443/tcp on 192.168.223.1Discovered open port 8080/tcp on 192.168.223.1Discovered open port 9220/tcp on 192.168.223.1Discovered open port 6839/tcp on 192.168.223.1Discovered open port 631/tcp on 192.168.223.1Discovered open port 7435/tcp on 192.168.223.1Discovered open port 8089/tcp on 192.168.223.1Discovered open port 9100/tcp on 192.168.223.1Completed SYN Stealth Scan at 07:58, 1.71s elapsed (1000 total ports)Initiating UDP Scan at 07:58Scanning 192.168.223.1 [1000 ports]Discovered open port 5353/udp on 192.168.223.1Completed UDP Scan at 07:58, 1.82s elapsed (1000 total ports)Initiating Service scan at 07:58Scanning 20 services on 192.168.223.1Discovered open port 161/udp on 192.168.223.1Discovered open|filtered port 161/udp on 192.168.223.1 is actually open
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 07:51 Central Daylight TimeNmap scan report for 192.168.223.1Host is up (0.0025s latency).Not shown: 93 closed portsPORT STATE SERVICE VERSION80/tcp open http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)139/tcp open tcpwrapped443/tcp open ssl/http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)445/tcp open netbios-ssn631/tcp open http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)8080/tcp open http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)9100/tcp open jetdirect?MAC Address: A03:C1:BD:C8:34 (Unknown)Device type: printer|general purposeRunning: HP embedded, Wind River VxWorksOS CPE: cpe:/h:hp:laserjet_cm1415fnw cpe:/h:hp:laserjet_cp1525nw cpe:/h:hp:laserjet_1536dnf cpe:/o:windriver:vxworksOS details: HP LaserJet CM1415fnw, CP1525nw, or 1536dnf printer, VxWorksNetwork Distance: 1 hopService Info: Device: printer; CPE: cpe:/h:hphotosmart_7520OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .Nmap done: 1 IP address (1 host up) scanned in 34.11 secondsOK now I am able to run a full scan on TCP ports without causing a lock up of the printer.
I found that having the printer connect to a router that has been setup to use channel 5, 6 or 7 will cause port scanning issues with the printer.
It is obvious that there are 18 ports that are seen as open, whether they are used or not. Two of which are active but have no service connected to them. Some are just dead like port 25, but over half are active enough to recieve data and lock network connectivity within the printer.
As the firmware states some other laser jets may be affected depending on how the configuration can be set.
I moved my routers channel to channel 1 as it is the only other option I have in a highly congested location. It is not as good as channel 6, but the printer seems to have channel 6 locked in for direct printing.
Here is the latest full scan with UDP enabled, it is the furthest and most complete scan I am able to complete, with UDP ports enabled. The TCP port scan has a bit more and I have placed a simple list below the information given here:
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 13:27 Central Daylight Time
NSE: Loaded 110 scripts for scanning.
NSE: Script Pre-scanning.
Initiating ARP Ping Scan at 13:27
Scanning 192.168.1.211 [1 port]
Completed ARP Ping Scan at 13:27, 0.44s elapsed (1 total hosts)
Initiating Parallel DNS resolution of 1 host. at 13:27
Completed Parallel DNS resolution of 1 host. at 13:27, 0.03s elapsed
Initiating SYN Stealth Scan at 13:27
Scanning 192.168.1.211 [1000 ports]
Discovered open port 443/tcp on 192.168.1.211
Discovered open port 80/tcp on 192.168.1.211
Discovered open port 139/tcp on 192.168.1.211
Discovered open port 8080/tcp on 192.168.1.211
Discovered open port 445/tcp on 192.168.1.211
Discovered open port 631/tcp on 192.168.1.211
Discovered open port 9100/tcp on 192.168.1.211
Discovered open port 7435/tcp on 192.168.1.211
Discovered open port 9220/tcp on 192.168.1.211
Discovered open port 6839/tcp on 192.168.1.211
Completed SYN Stealth Scan at 13:27, 5.25s elapsed (1000 total ports)
Initiating UDP Scan at 13:27
Scanning 192.168.1.211 [1000 ports]
Discovered open port 137/udp on 192.168.1.211
Completed UDP Scan at 13:27, 4.46s elapsed (1000 total ports)
Initiating Service scan at 13:27
Scanning 16 services on 192.168.1.211
Discovered open port 161/udp on 192.168.1.211
Discovered open|filtered port 161/udp on 192.168.1.211 is actually open
Completed Service scan at 13:29, 82.51s elapsed (17 services on 1 host)
Initiating OS detection (try #1) against 192.168.1.211
NSE: Script scanning 192.168.1.211.
Initiating NSE at 13:29
Completed NSE at 13:30, 82.29s elapsed
Nmap scan report for 192.168.1.211
Host is up (0.023s latency).
Not shown: 1983 closed ports
PORT STATE SERVICE VERSION
80/tcp open http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
139/tcp open tcpwrapped
443/tcp open ssl/http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
| ssl-cert: Subject: commonName=HPPS7525/organizationName=HP/stateOrProvinceName=Washington/countryName=US
| Issuer: commonName=HPPS7525/organizationName=HP/stateOrProvinceName=Washington/countryName=US
| Public Key type: rsa
| Public Key bits: 1024
| Not valid before: 2014-02-25T10:12:24+00:00
| Not valid after: 2034-02-20T10:12:24+00:00
| MD5: 9144 ca3b 557e 09cc aba0 8387 2732 2375
|_SHA-1: a6b2 95c0 b72a 7201 578c 32de 662a e6fe b082 48ca
|_ssl-date: 2014-03-21T13:30:09+00:00; -4h59m12s from local time.
445/tcp open netbios-ssn
631/tcp open http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
6839/tcp open tcpwrapped
7435/tcp open tcpwrapped
8080/tcp open http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
9100/tcp open jetdirect?
9220/tcp open hp-gsg HP Generic Scan Gateway 1.0
137/udp open netbios-ns Samba nmbd (workgroup: HPPS7525)
138/udp open|filtered netbios-dgm
161/udp open snmp SNMPv1 server (public)
| snmp-hh3c-logins:
|_ baseoid: 1.3.6.1.4.1.25506.2.12.1.1.1
| snmp-interfaces:
| Wifi0
| IP address: 192.168.1.211 Netmask: 255.255.255.0
| MAC address: a0:d3:c1:bd:c8:32 (Unknown)
| Type: ethernetCsmacd Speed: 10 Mbps
| Status: up
|_ Traffic stats: 6.16 Mb sent, 3.43 Mb received
| snmp-netstat:
| TCP 0.0.0.0:7435 0.0.0.0:0
| TCP 192.168.1.211:56076 15.201.145.52:5222
| UDP 0.0.0.0:3702 *:*
| UDP 127.0.0.1:666 *:*
|_ UDP 192.168.223.1:67 *:*
| snmp-sysdescr: HP ETHERNET MULTI-ENVIRONMENT
|_ System uptime: 0 days, 3:34:23.28 (1286328 timeticks)
| snmp-win32-shares:
|_ baseoid: 1.3.6.1.4.1.77.1.2.27
1022/udp open|filtered exp2
1023/udp open|filtered unknown
3702/udp open|filtered ws-discovery
5355/udp open|filtered llmnr
MAC Address: A03:C1:BD:C8:32 (Unknown)
Device type: general purpose
Running: Wind River VxWorks
OS CPE: cpe:/o:windriver:vxworks
OS details: VxWorks
Uptime guess: 0.150 days (since Fri Mar 21 09:55:04 2014)
Network Distance: 1 hop
TCP Sequence Prediction: Difficulty=255 (Good luck!)
IP ID Sequence Generation: Busy server or unknown class
Service Info: Hosts: HPA0D3C1BDC832, HPPS7525; Device: printer; CPE: cpe:/h:hphotosmart_7520
Host script results:
| nbstat:
| NetBIOS name: HPA0D3C1BDC832, NetBIOS user: <unknown>, NetBIOS MAC: <unknown>
| Names
| HPA0D3C1BDC832<00> Flags: <unique><active><permanent>
| MSHOME<00> Flags: <group><active><permanent>
| HPA0D3C1BDC832<20> Flags: <unique><active><permanent>
| HPPS7525<00> Flags: <unique><active><permanent>
|_ HPPS7525<20> Flags: <unique><active><permanent>
| smb-security-mode:
| Account that was used for smb scripts: guest
| User-level authentication
| SMB Security: Challenge/response passwords supported
|_ Message signing disabled (dangerous, but default)
TRACEROUTE
HOP RTT ADDRESS
1 23.26 ms 192.168.1.211
NSE: Script Post-scanning.
Read data files from: F:\Progs\Nmap
OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 180.90 seconds
Raw packets sent: 2030 (74.829KB) | Rcvd: 2921 (149.377KB)
+++++++++++++++++++++++++++++++++++++++++++++++++++++===
Full TCP port scan without UDP scanning of all ports, showing up as open... * designates open and active.
192.168.223.1Discovered open port 25/tcp on
*192.168.223.1Discovered open port 80/tcp on
*192.168.223.1Discovered open port 110/tcp on
*192.168.223.1Discovered open port 119/tcp on
*192.168.223.1Discovered open port 139/tcp on
192.168.223.1Discovered open port 143/tcp on
*192.168.223.1Discovered open port 443/tcp on
*192.168.223.1Discovered open port 445/tcp on
192.168.223.1Discovered open port 465/tcp on
192.168.223.1Discovered open port 563/tcp on
192.168.223.1Discovered open port 587/tcp on
*192.168.223.1Discovered open port 631/tcp on
192.168.223.1Discovered open port 993/tcp on
192.168.223.1Discovered open port 995/tcp on
*192.168.223.1Discovered open port 7435/tcp on
*192.168.223.1Discovered open port 6839/tcp on
*192.168.223.1Discovered open port 8080/tcp on
192.168.223.1Discovered open port 8089/tcp on
*192.168.223.1Discovered open port 9100/tcp on
*192.168.223.1Discovered open port 9220/tcp on -
I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport -
Hi Experts
I am facing an issue with invoice. When i am cancelling an invoice , the system is actually not clearing the accounting doc for original invoice and neither it is clearing the accounting doc for cancelled invoice.
Also if i see the customer line item of the accounting doc for the cancelled invoice , then instead of taking the posting key as 12 i.e. Reverse Invoice it is taking as 11 : Credit Memo which is quite unusual and as far as i know this is something standard and not modifiable.
Kindly let me know if you can suggest any solution or comments to this issue
ThanksHi,
Check copy controls in VTFF.
Cancelled invoice should have the original invoice number in header and original invoice should contain the cancelled tick at header.
Check if you are getting those status in the respective documents.
Also, your delivery or order with reference to which the invoice was created will become open or being processed.
Also try running std program for reorganization of status indexes in SE38 , program RVV05IVB.
Regards,
Amit -
i've a big problem with my site!
i'm using muse and i love it so much!but i need some Help!
I can see that too many people have the same issues and they didn't find a solution.
So, if i am just one more. Anyone Just Tell me! i've problems with multi-language. My website is in English, A friend of mine is Spanish, he tried to open my website in Google Chrome and because his language is Spanish, Chrome show a small tip bar says "This Page is in English, Translate page to Spanish". when he perform that option, my site looks so strange. the text, shapes and spaces. Everything changes. the whole design changes.
How can i fix that !! is there is any help i can get on that matter !! Please !
www.disagno.com"Maps API usage has been disabled" !!!!!!
i want to show what i have about Google Translation. i will send some print screens now!
this is my website in the Original case, without any translation!
After Google Translation!
you can see the different in the Green Circle!! it's not a circle anymore!
Note that i already changed some spacing for the text in my Muse Site. So, i can get the same shapes in place with the Spanish Text.
I Hope you can understand my problem!
Multi-regional and multilingual sites.
Sanjit_Das
Amy_Wong -
In BI Publisher RTF table layout issue for invoice printing
Hi,
I am working on check printing and invoice printing project on bi publisher and i am facing one issue. That is i have used section break on check priting so because of that if the the records are more than 20 then check will print on second page and on first page there would be void printed othervise it should print on first page only. In this case the preprinted stationary is not having invoice table form. we are using blank preprinted stationary to print this .
Now i have done with invoice and cheque layout but in output if the number of records are more than 20 then its going to second page but the problem is that invoice table break into two parts and and the end lineof table layout is not coming on first page .even on second page i am not getting start layout line to make complete table outline.
I want that full table layouton both the pages of the table. i have tried to to create table skeleton and used it as a watermark to print all the records on it but it is coming in to the middle of the page .so it not working.
Please anyone knows the solution on this problem please let me know or share your thoughts on this issue.
As i have tried many options but still stuck into this issue .Kindly help me.
Regards,
Prachi G.Hmmm ... sounds like a regression bug.
I would contact support, provide, the version you are using, layout template, sample XML data, 2000 RTF output and 2003 RTF output and ask them to investigate.
Tim -
New HH3 - Issues with Kodak Printer and iPhone 3GS
Hello,
Here is the background:
Previously had a D-Link DSL-G624M router and everything connected wirelessly. This included 2 laptops, Kodak ESP 5250 Printer and iPhone 3GS. Router broadcasting on channel 6 (locked).
Since upgrading to Infinity replaced the D-Link with a HH3. Laptops connect fine but have issues with other wireless devices.
iPhone: Seems to lose internet (not necessarily wireless connection though) intermittently. The phone remains connected to the HH3 and can be seen in the DHCP table and Home Network screens. The iPhone also reports that it is connected to the HH3. However, when attempting to access the internet using either Safari or apps it doesn't work. This can be fixed by forgetting the network and re-joining or turning Airplane Mode on and then off.
Kodak ESP5250 Printer: This connects fine to the HH3 and remains in the DHCP table and Home Network with the correct IP Address. Laptop A is able to connect and print successfully. However, after putting the laptop into sleep mode and re-waking it it is unable to Print. The Printer is still connected to the HH3 and laptop claims it is 'Ready' but unable to print. The only way i have found to fix this is to re-install the entire Printer software!! However, Laptop B does not have this problem and can be put into Sleep mode, Hibernate or restart and the printer remain connected. I do not think it is a firewall issue as able to connect until re-waking from sleep.
You're probably thinking the same as me that this sounds like hardware issues and not the HH3. Maybe coincidence that it started happening after changing to HH3. Maybe something wrong with the iPhone or Laptop A and/or Printer?!? Tried setting a manual channel on the HH3 as suggested by other posts but this had no effect. (Used inSSIDer to determine best channel). Also increased the IP Address lease time from 1 Day to 21 Days - but again no difference.
Current situation: Connected the D-Link router to the HH3 using Ethernet cable. Disabled DHCP and DNS on the D-Link router and kept SSID different. Now connected all devices to the D-Link router and nothing to the HH3 and everything is working as it did previously. The iPhone remains stable and the Kodak printer remains connected to both Laptops after re-waking from Sleep Mode.
I haven't yet contacted BT but i'm leaning towards it being a dodgy HH3. Anyone have any suggestions??
Thanks,
Martyn...For starters, there's nothing wrong with your Iphone or Kodak prn. The issue is the HH3
I had a very similar issue connecting iMac, iPad, Macbook Pro, iPhone, Thinkpad and Canon prn via wireless to the HH3... Lots of disconnections, devices that couldn't log in, very low wireless speeds, printer not recognized, etc,etc
I went mad, pretty much did the same things as you did: inSSIDer, changing channels, re-installing whole softw drv !, reorientating HH3 position, manually assigning IPs and channels... nothing would seem to work!
Then I connected a Netgear router to HH3 via ethernet cable -like you did- and suddenly everything seemed to go back to normal. Here's what I found out after much head knocking:
1) The issue is the HH3, not that it's faulty but simply put it can't deal with lots of wireless traffic. The minute you connect several devices it gets clogged up
2) HH3 seem not to recognize WiFI printers that have a 'static' IP (not sure why)... this was a nightmare
3) if you have many devices connected, HH3 doesn't seem to 'like' Apple devices or wifi Airport powered (not sure why). After sleep mode these device can't pick up IP over the air, and you need to manually renew DHCP leases. There are several reports about this in Apple forums.
So here's what I did:
1) I ditched the HH3
2) I connected the Openreach router to a dual-band Netgear wndr3400 **cable** router (PPPoE connection)
3) I re-installed the prn drv in USB mode and then added wifi printer in wifi mode while usb connected
4) I created two-split WIFI networks; one in the channel 6/2.4Ghz frequency and another in the channels 44-48/5Ghz freq to which I assigned most devices (It seems BT Infinity wifi works best in 5Ghz channels)
Results: all devices recognised & connected via WiFI, no disconnections, steady WIFI speed almost as fast as ethernet cable, wifi prn prints fine from all devices... No more WIFI connnectivity issues.
I hope this helps, good luck
(note: my current issue is that my profile dropped from 34/8 to 21/2 during testing phase) -
Issues with Form printing using a 3rd party software!!!!!!!!!!!!!!!11
Hi All,
We are printing our month end AR statements using Xerox DP100 printers. We are using a SAP Script as the layout form. Everything works perfectly alright when a direct print is issued to the printer. But the scenario here is the statements are sent to a 3rd party software so that the statements can be saved in their repository and made available to be viewed and printed whenever necessary. Now the issue is when this 3rd Party Software(TPS) reads the SAP generated PCL from its report store on the unix host and generates a PDF File that it presents to the web client user for (re)printing via his/her PC it appears that the TPS or Websphere or Adobe is performing a font substituion - replacing the Univers font(used in R/3) which is not loaded on the unix host with a different font(with different sizing and/or behavior).
As a result the horizontal and vertical positioning generated by SAP(which is correct for the Univers font) is 'wrong' for the substituted font. The fixed size fields print OK but gradually move to the right. The varying size amount columns do not align correctly and fall off the right side of the page.
Can anyone give me pointers on what can be done to arrest this error.
Does the font need to be loaded on the unix host or the font used in the form be changed?
Regards,
KarthikKarthik,
Sap script behaves differently for different printers. You will have to change margins when you change your printer/software accordingly. -
Hello
we have an issue with printing from redirected printer
on the local machine Windows 8.1 i have a printer installed and when i try to print from a remote pc to my installed printer on my local pc the paper type is replaced.
on the local printer it was set to letter but on the remote the redirected printer is set to legal.
i try to switch it to letter but it was not kept it switch back to legal.
any adviced will be good ?
ThanksHi,
What's the operating system of remote PC we log onto? Here, I am not sure that this can help but we can give a try by disabling the following policy setting:
Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Printer Redirection\Use Remote Desktop Easy Print printer driver first
Regarding this point, the following KB article can be referred to for more information.
The client printer may print the documents by using an incorrect paper size if the "Use Remote Desktop Easy Print printer driver first" policy is enabled
https://support.microsoft.com/en-us/kb/980056
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Multi monitor issues with resolution(?)
At a customer I have got a really strange and annoying problem. The customer has got a Hyper-V VM with 2012 R2 Server as a RDS server aka Terminal Server.
One user has got issues with his multi monitor setup. The connection settings seems to be OK. It is set to full screen and the checkbox for the multi monitor configuration is enabled. Theoretically this works because the user sees a correct setup with one
primary display and one secondary display. The settings itself are correct.
1. Primary display: 1680*1050
2. Secondary display: 27" 1920*1080
The display settings on the client are nearly the same except that the numbers of the two monitors are different (those numbers you get when you click identify at the resolution change window). On the Windows 7 client the primary display
number 2 and the 27" has got the number 1. On the Terminal Server the primary display has got the number 1 and the 27" display has got the number 2. But the corresponding resolution at the display number is correct.
Now the problem. Everything seems fine, the desktop is expended. But when the user is "touching" the top or bottom edge of the screen the display is scrolling (in full screen) - like in a 3D game scrolling over a map. The user told me that
both screens are scrolling equally at the same time. I am not sure but the user told me that if he is going to the bottom the CLIENT task bar appears. Changing the task bar of the client to fixed the user told me that the task bar will always show up. - Strange
that CTRL + ALT + BREAK does not work.
I tried to press CTRL + ALT + BREAK twice, changing the resolution to a fixed value and back to full screen again, changing the primary display to the new 27" monitor, adding smart sizing:i:1 to rdp file and upgrading the Intel HD
4600 laptop graphic drivers (must be downloaded from Lenovo :/). NOTHING helped :(.
But this strange behavior does not exist on the client. Opening two programs (simple notepad e.g.) on each display and maximize them and moving the mouse the screen borders won't show this problem. It only exist on the remote session.
Now the "funny" part. If I connect with Team Viewer to the client the problem disappears as long as I am connected. If I disconnect the problem shows up again.Hi,
This is most likely a problem with the local machine's graphics driver and monitor configuration. I would suggest trying different things like removing and re-installing the display adapter and its drivers, removing the second monitor/restarting/adding
the second monitor back, adjusting the multi-monitor settings in display properties (changing between extending the desktop to the second monitor and not), undocking/restarting/docking, changing between different modes using Fn key on laptop (if laptop), etc.
The behavior under Team Viewer is likely because the graphics configuration is different when the driver is active.
I wish I could give you more precise instructions on how to resolve the issue. I have seen this behavior (panning desktop, multi-monitor config not exactly right) probably 3 times over the last 5 years, always with a laptop, and I had to "play"
with the settings before it finally went back to normal. The instances I have seen it occur did not involve Remote Desktop specifically.
-TP -
Issues With Word Print Dialogue in Leopard
I have run accross an issue with the MS Word 2008 print dialogue. The window is discolored and its contents located in strange locations. This would appear to be an issue with the OS's rendering of the Print window, as it looks like what might happen to a badly written program for system such as Tiger that use the old aqua appearance. Any suggestions regarding this issue would be appreciated.
I don't have Word 2008, but is that the only App that does it?
Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
Any change on reboot? -
Intermittent issues with SAP printing
Hi ALl, We have been having intermittent issues with printing (more specifically BOL printing) on both ECC production & Watre house production server recently. These issues occur at random hours and resolve themselves before the teams have had an opportunity to troubleshoot in detail. Also, both the Basis and hosting teams have analyzed the logs but haven’t reached a definite conclusion. Procedure used in printing: An outbound queue is created and processed in Warehouse Production and passed to ECC PRoduction. In ECC PRod an inbound queue is processed to update and trigger the shipment document. When the shipment document is completed it then triggers the print of the BOL output from the shipment. Then and only then is anything sent to the print queue. AND it will be with user id = ALEREMOTE. The other printing works fine. Any thought..will be highly obliged.. Regards, VIcky
Doug,
If you have a service contract feel free to call in to the support line and you'll be able to work with someone on the phone. That'll be the quickest way to resolution.
Feel free to send me a PM if you wish and I can take a look at the code and test it on our machine.
Notes for Branch AE:
Please reply to This Post within 24 hours
The US AE is expected to reply to all of your posts within 24 hours. Having this expectation will keep the escalation moving quickly and toward a fast resolution.
You can also use other communication channels: Phone, Sametime, Lync,etc. to discuss the issue with the US AE. This can help with troubleshooting and quick diagnosis of the issue.
Click here to provide kudos for a post on this page -
Hi; I'm running a Mac with the following specs:
3 x 30" ACD
MacPro 2,8 Ghz Quad
2x ATI Radon 2600 XT graphics cards (2 screens attached to 1 card; 1 screen to the other card)
I've encountered after the switch from CS3 to CS4 the following issue:
Whenever I try to use the new Bridge Review function using one of the the screens sharing one graphics card I just get a grey screen.
If I move the bridge window to the solely attached screen it works.
Is that an issue of CS4 or is just the throughput of the second graCard providing 2 monitors not sufficient.
Thanks t.T,
There are known issues with using more than one graphics card which Apple has not truly resolved. You may want to browse some of the threads in the Adobe Photoshop Macintosh forum.
In addition, you should know that Photoshop and Bridge cannot really take advantage of more than one graphic card.
http://forums.adobe.com/message/1540485#1540485
This bit of information in relation to GPU and OpenGL features and
limitations in Photoshop CS4 had totally escaped me until now. Though
it doesn't affect my setup, it might be of interest to others who may
have missed it too.
Excerpt from
http://www.adobe.com/go/kb404898
Q. Does Photoshop take advantage of dual-GPU display cards?
A. Not at this time.
Q. Why can't Photoshop take advantage of more than one display card?
A. When you move an image window between two monitors that are
each on a separate display card, the GPU attached to the second monitor
does not have access to the data necessary to accelerate drawing. The
SLI and Crossfire technologies that use more than one GPU to speed up
full-screen games will not work with Photoshop, because their use is
limited by design to accelerate only full-screen games. -
Issue with network printing after installation of 10.5.6.
Ehhmm, sorry if I disturb, but can you help me? I cannot print/scan over wireless time capsule since I have installed 10.5.6. The printer is connected to a windows cable network. Before everything performed perfectly. The printer is a HP Photosmart 3210 all in one. I have already installed the newest software.
Thnk you. CPi tried the firewall settings, but that didn't help.
after reading for hours, downloading useless drivers, resetting the printer, plugging and unplugging and on and on, i uninstalled and then reinstalled by HP printer software (the disc that came with the printer years ago) for the second time. Configured the printer with the printer USB plugged into my Airbook. That was never the problem - always worked fine.
Then I turned the printer off, plugged the USB into the Airport Extreme Base Station, unplugged the Airport Extreme Base Station, plugged it back in, turned the printer on. And lo and behold when i went to my SysPrefs, Print and Fax, and added another printer, it was recognized as a bonjour printer (that was always the case - the hold up was that it wouldn't find an appropriate driver), and when I chose AutoSelect for the driver, it came up with one! This was where the hang up was before. It selected a 2.2.9 driver, and when the printer is plugged directly into my computer via USB it uses a 4.0.1 driver - who knows why. but it's printing.
i had also read that it might be impossible to run this particular HP officejet all-in-one (5510v) wirelessly, so i'm very happy. hope this can help someone else. -
Print preview issue with invoice script
Hi folks
i am working on preparing UTP for a invoice script(modification of standard one).
here when i am running the billing document number in VF02 i am not able to see the print preview.
i would like to know what should i do on this as i need a printpreview to prepare UTP on this layout.
when i select the message type(output type) of that layout and press the option print preview nothing is happening.
when i say print in the status bar it is giving success message and when i saw in the spool the status is in waiting.
can anyone let me know what i need to do ?
thanks in advanceHi
Do u know the o/p type of the script ?
if not ist see the out put type by going to Tcode NACE
after thatjust go through the steps...
1 vf02 > give a doc no-> enter
2
from menue bar chose GOTO> Header> output
3.
now give the output type . medium -> printout press enter
4
save and go bck to 1st screen of vf02
from menue bar chose billing document--> issueoutput type
chose select the printout and select print preview.
rewards if useful
Regards
Sachhi
Maybe you are looking for
-
I startet by having iphoto 6, and the library update did not finish up. Tried to uninstall iphoto 6 and then install '11 again. I have back up my library on external. I have tried to download the tool for preparing an old iphoto library, to see if th
-
Nautilus have problem with opening paths other than /home
Hi, I have strange problem with nautilus. When I want to open some path ie. /media/*some mounted device* or /tmp usign gnome-menu "Places" I see hourglass cursor for a while and then nothing happens. Only home would open with "Places" however typing
-
Anyone know if all the features of the Harman Kardon Go+Play work with the iphone. will I dock the phone, does the video out function work. If anybody has the Iphone and these speakers or has any more info please help.
-
What is the best way to Handle them ?
-
How could I add another web service (like the ones hosted) to the main index page that link to another computer hosting a filemaker pro database? I would love for it to have the same look as the way the current page is. Thanks in advance. mark