Basic MIB and SNMP understanding using JMX
Hello
i am trying to get my head around SNMP using JMX, but i am finding it dificult to know where to start.
ideally i would love to find some basic code and go through it, so that i can understand it.
i would love to find some code which just "Gets" one parameter from a mib stored on a seperate PC and displays it on another PC.
I have looked at advent - to complex for what i want.
Any help or suggestions - or possibly Code!! would be appreciated.
Thanks
Norman
There is an example code included in the upcoming book "JMX: Managing J2EE with Java Management Extensions" that shows how to retrieve a simple attribute value from an JMX SNMP Adaptor using the Sun JDMK and AdventNet SNMP toolkits. It's a brief introduction to SNMP integration but should get you started.
http://www.amazon.com/exec/obidos/ASIN/0672322889/104-6670791-7933546
Unfortunately you still have to wait a week or two to get it.
Basically the examples show how you can generate the required MBeans from an SNMP MIB definition (in Sun's JDMK this is a tool called MibGen), then register the SNMP Adaptor to the MBean server and associate and register the MBeans that were generated from the MIB to the adaptor. You can then use an SNMP client to connect to the adaptor and manipulate the MBeans through SNMP.
Hope this is of some help.
-- Juha
Similar Messages
-
Hi,
I am new to mib world. I want to use mib in order to pull some information about routers health as below
CPU usage utilization
Free Memory
Interface Drops statistics
Environmental Parameter (temperature / power)Look at the CMS functionality in the bouncycastle provider, in the bcmail distro. You can find some examples in the bcmail distro also. Maybe I'll post an example later.
-
Reading SNMP packet using PL/SQL and XML
Hi,
Is it possible to read the content of a SNMP packet using MIB file converted into XML. I know it's possible to develop a java program which can collect SNMP packets from the network and inserts them into Oracle. The problem after that is how to read the content using MIB library file. It's possible to convert the MIB file into XML file but the problem is to create s PL/SQL block which can read the XML file and based on the content to translate the information from the SNMP packet. Is it possible?
regards
Edited by: user10484841 on Sep 24, 2010 3:15 AMThank you for the reply!
I have converted oracle MIB into xml using prtg's import tool. As far as I see prtg also uses xml as you can see below.
So how I can translate string for example 1.3.6.1.2.1.39.1.1.1.1.1111111111 using xml and pl/sql?
Can you give me direction where to start?
<?xml version="1.0" encoding="ISO8859-1" ?>
<oidlist>
<system>
<version>
1
</version>
</system>
<list>
<entry>
<name>
RDBMS-MIB|rdbms db: #[1.3.6.1.2.1.39.1.1.1.1]|rdbms db index
</name>
<oid>
1.3.6.1.2.1.39.1.1.1.1
</oid>
<type>
vmAbsolute
</type>
<kind>
mkTable
</kind>
<unittype>
sutCustom
</unittype>
<units>
</units>
<indicator>
rdbms db index
</indicator>
<scale>
1
</scale>
<multiply>
no
</multiply>
<max>
0
</max>
<usegetnext>
no
</usegetnext>
<is64bit>
no
</is64bit>
<isunsigned>
no
</isunsigned>
<isfloat>
no
</isfloat>
<description>
A numeric index, unique among all the databases from all products on this host. This value is a surrogate for the conceptually unique key, which is {PrivateMibOID, databasename}
</description>
</entry>
<entry>
<name>
RDBMS-MIB|rdbms db info: #[1.3.6.1.2.1.39.1.1.1.3]|rdbms db info size units
</name>
<oid>
1.3.6.1.2.1.39.1.2.1.3
</oid>
<type>
vmAbsolute
</type>
<kind>
mkTable
</kind>
<unittype>
sutCustom
</unittype>
<units>
</units>
<indicator>
rdbms db info size units
</indicator>
<scale>
1
</scale>
<multiply>
no
</multiply>
<max>
0
</max>
<usegetnext>
no
</usegetnext>
<is64bit>
no
</is64bit>
<isunsigned>
no
</isunsigned>
<isfloat>
no
</isfloat>
<description>
Identification of the units used to measure the size of this database in rdbmsDbInfoSizeAllocated and rdbmsDbInfoSizeUsed. bytes(1) indicates ndividual bytes, kbytes(2) indicates units of kilobytes, mbytes(3) indicates units of megabytes, gbytes(4) indicates units of gigabytes, and tbytes(5) indicates units of terabytes. All are binary multiples -- 1K = 1024. If writable, changes here are reflected in the get values of the associated objects.
</description>
</entry>
<entry>
<name>
RDBMS-MIB|rdbms db info: #[1.3.6.1.2.1.39.1.1.1.3]| rdbms db info size allocated
</name>
<oid>
1.3.6.1.2.1.39.1.2.1.4
</oid>
<type>
vmAbsolute
</type>
<kind>
mkTable
</kind>
<unittype>
sutCustom
</unittype>
<units>
</units>
<indicator>
rdbms db info size allocated
</indicator>
<scale>
1
</scale>
<multiply>
no
</multiply>
<max>
0
</max>
<usegetnext>
no
</usegetnext>
<is64bit>
no
</is64bit>
<isunsigned>
no
</isunsigned>
<isfloat>
no
</isfloat>
<description>
The estimated size of this database (in rdbmsDbInfoSizeUnits), which is the disk space that has been allocated to it and is no longer available to sers on this host. rdbmsDbInfoSize does not necessarily indicate the amount of space actually in use for database data. Some databases may support extending allocated size, and others may not. Note that a compliant agent does not need to allow write access to this object.
</description>
</entry>
</list>
</oidlist>
*Note that the xml file is not full die to 30000 character restriction of oracle's forum
regards
Edited by: user10484841 on Oct 19, 2010 6:07 PM
Edited by: user10484841 on Oct 19, 2010 6:07 PM -
When I try to open FF4 I get the message it can't be opened because it is not supported on my architecture. I can't believe no-one else has had this problem. You must have a lot of internet duffers who don't really know what they're doing. I need to get my old version of FF back if I'm going to run it on my computer. I don't understand why an app as widely used as this doesn't have a pre-app that assesses whether one has the architecture to run a new version. You advertisement merely said OS 10, and "all systems". It did not specify a newer MacOS than my 10.4.11. Now I seem to be out of luck and will just use Safari.
Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html -
I have no idea if the problem is with Safari or with the Gmail files. I get the msg. "Error' over and over and often "you may have entered the address wrong" (when I KNOW I HAVE NOT) and other msgs. which I do not remember at this time. I'm having to use ''Basic HTML" and that seems to be OK - tho it is insufficient. The "Mail" app in OS X works fine but I cannot tolerate the format and must solve this dilemma. Any suggestions? I've read the "related issues" section and have not found anything closely related to this issue and would appreciate any suggestions.
Thanks tons.
Sam Sayger
Hernando, MSI have no idea if the problem is with Safari or with the Gmail files. I get the msg. "Error' over and over and often "you may have entered the address wrong" (when I KNOW I HAVE NOT) and other msgs. which I do not remember at this time. I'm having to use ''Basic HTML" and that seems to be OK - tho it is insufficient. The "Mail" app in OS X works fine but I cannot tolerate the format and must solve this dilemma. Any suggestions? I've read the "related issues" section and have not found anything closely related to this issue and would appreciate any suggestions.
Thanks tons.
Sam Sayger
Hernando, MS -
I've been experimenting with Java instrumentation with MBeans.
I created a small app to try out some of the JMX features. The app has a class that I would like to monitor with MBeans. So I created to interfaces to function as MBeans and then had the class in my app implement both interfaces.
I then wrote a class with only a main() method to instantiate my class and call the methods it implemented from my MBean interface. In the main method I provided the code to get an MBeanServer object and then use that to register my class that implemented the MBean interfaces. My intention was to try this out, but before I did I commented out the code needed to register the class with the MBean server. I did this because I assumed the implemented interface methods would be available for monitoring without registering and it made me think if I can monitor the instrumented class like this why would I need the MBean server.
So what is the purpose of the JMX framework and MBeans if I can instrument any class as described above?
Is it necessary to register only to be able to monitor from outside the JMV where the instrumented class is running?
Or are there other advantages\features\reasons for registering with the MBean server?
Thanks"MS" <[email protected]> wrote:
>
Hello All,
I am looking for a java program that can create JDBC connection pool
and datasource
using JMX/Mbeans of WLS 7.0.2.
Can somebody help?
Thanks in advance.
rgds
MS -
Hi. Does anyone know what video editing software is compatible with my MacBook - version 10.6.3? I am looking to edit films and already have Final Cut Pro, but am looking for something a little more basic and easier to use. Thanks. Vicki
Hi Cereskit
Thanks again for the message. I've done the updates and have the App Store on my desktop. I went into it and searched for imovie but couldn't find the basic imovie, which I presume is what I'd need for editing?, rather than imovie 11 for £10.49, which is for making trailers, it seems. Also, were you saying that imovie would be free?
Vicki -
I have a windows laptop with Vista Home Basic and need to use windows for course work. How can I get it onto my Mac as I have no disks. Laptop arrived with Vista pre-loaded.
ThanksAs I have said before, AppleHFS.sys for one thing can interfere.
MacDrive or Paragon HFS help.
Paragon works
So yes if you can then use Paragon or something, though only one person has come here and really said they used Disk Utility. Not enough to endorse.
Windows 8 CP is what I use and it is more stable reliable etc etc than Windows 7 was on Mac Pro 1,1.
But why pop into someone's thread. -
Using TREX for Material master for longtext (basic data) and classification
Hi together,
I am only having some basic know how about TREX.
We want to use TREX for quick search in Material master long texts (like basic data and so on) and also for searching in characteristic values of material master (tab: classification).
The TREX is successfull installed and It was possible for me to create an index for Material BUS1006001 in SES_ADMIN and search the material in this transaction by TREX. I also find the index in TREX_ADMIN "green".
But there I could only use the attributes of the standard business objects (for example describtion of material master = short text).
Now I want to use the long texts and the classification. What do I have to do in SES_ADMIN or somewhere else? Actually I only want to use the functionality in SAP GUI. If I know how to make the indixes I could program an own F4-Help for this in ABAP.
Can anybody help me?
Thanks a lot.
FlorianHi Florian,
SES_ADMIN is the admin cockpit of the Search Engine Service (SES).
SES-based solutions usually include searching the long text. Just test!
SES-based solutions usually do not include searching via classification.
The successor framework of SES is "Embedded Search".
Embedded Search is available with NW 7.01, corresponding to ERP 6.04. For details see SAP note 1254901
Classification is supported by Embedded Search with NW 7.02, corresponding to ERP 6.05.
ERP 6.05 is in unrestricted availability since summer 2011.
If the customer can not upgrade to ERP 6.05, there is a preliminary SES-based solution for searching via classification.
The solution can only be provided via SAP PLM consulting.
Kind regards, Klaus Irle -
I must purchase a photo editing tool and don't know if I should go with Photoshop or Lightroom. I need to learn how to do basic photo editing on pictures used for a news website. Thoughts? Thanks!
Hi scienceiscool,
You can go ahead with the photography plan as mentioned in the link below:
https://creative.adobe.com/plans/photography?promoid=KLXML
Kindly refer to the link below to get used to the application better:
Photoshop CC tutorials from novice to expert
Regards,
Sheena K -
My daughter is using old round airport at college. I set it up originally without password protection because my macbook was too new to recognize the old style airport. I have an old iBook and I understand I can use that to set the passsword. But I can't seem to figure out even using the Airport admin how to establish a password. Any suggestions? Thanks.
If it even has that built-in, you would configure it using Airport Utility. It would likely be in the Wireless configuration for first turning on security and then setting the required password. For Macs you should use WPA Personal if the option is present.
-
Difference between MIB retrieval and SNMP server hosts
Hi all,
can anybody explain difference between MIB retrieval systems and SNMP server hosts?The two of these can both be different systems or the same system
A MIB retrieval system usually is an NMS system that actively polls the device to collect SNMP/MIB information (counters, stats, etc)
Whereas a host is typically where traps are sent to from the network devices.
Most NMS systems act as both a retrieval (poller) and host (trap receiver). -
Hello, my English his my second languish, i hope i will be understandable and will understand you.
First see if the image is in RGB, Image CMYK is not displayed on the Internet
The second image name has to be imported in website programming. For example: On the website the image is figura.jpg name if you rename the image to figura1.jpg the site will not find the image.
In Photoshop to save as web it will save us now for internet formats. PNG, JPG, Gif -
SCOM SP1 Groups, Classes and SNMP
I've been working on a management pack using some of the examples on the net (Kristopher Bash from the operating-quadrantin has been a huge inspiration) to monitor an Isilon cluster. This had lead me to a number of interesting challenges to over come since I have to design this within the confines of SP1 and I have a unique networking to device configuration.
Device Overview:
The Isilon cluster itself is a number of FreeBSD systems (nodes) joined together via and infiniband backend to create a single NAS. While normally this would not be an issue, network connectivity to the device and SNMP response from the cluster have been. In my configuration I have a total of 8 nodes each node has 2 network interfaces. Of these 16 network interfaces only 2 are accessible/on the same network as my RMS (em1 node2, em1 node4).
Device SNMP Design:
While the cluster is highly dynamic the SNMP sub-systems are not. The MIB created by Isilon does not join the whole of the cluster into an index for SNMP polling. I can only poll a single nodes OID's. To over come this limitation Isilon implemented SNMP-Proxy or comtosec within the system. This allowed me to poll node 3 by changing the community name for the OID I was polling from the discovered name to <discoveredname>_node_3.
MP Design:
Now I'm not the best at MP design since I rarely work within SCOM so don't laugh too hard... I reused items from Kristopher's Cisco MP and created a number of classes for discovery and item hosting. To address the limitation I found within SCOM for dynamic discovery and 1 IP address 1 Community Name, I created a class property within the root called ConfiguredNodes. I can poll the Isilon an populate this value (8). Then I created a sub-class property value called NodeCommStr to fill in all the custom community names I generate using a VB script with Base64 encode/decode, the discovery community name and the ConfiguredNodes value, in the data source for sub-class discovery. public_node_1 public_node_2 etc...
All in all this is working well however I have run into a few design roadblocks and I have some questions.
1. When I discover a set of items within the Isilon cluster the health explorer is not sorting this information alphabetically. Is there a value I can include in the dependency roll-up to correct this?
2. I have run into an issue with the Isilon MIB and I'm looking for the best way to overcome the MIB's design. They included a fan table with fan information and speed of the fans however there is no status (success{0}, warning{1}, error{2}). I created a monitor type to compensate for this and included overrides for the warning and critical event points. This is where I found the curve ball, seems that the fans are not the same.... There are 2 sets of fans - Chassis and Power Supply - and they have different thresholds *rolls eyes*. Some I'm asking for the best design advice, should I create 2 classes, discoveries, monitor types, etc.? Or can I address this issue by creating 2 monitor types with a string filter?
3. I've been successful in creating this MP and displaying the information as a single device however I was wondering if there was a way to create dynamic groups with sub groups. This would have to be 100% dynamic since I can add a 9th 10th 192nd (yes 192) node to the cluster.
Cluster
-ClusterNode1
-ClusterNode1Power
-ClusterNode1Fans
-etc
The information is there in the NodeCommStr, I'm just in brain lock on how to design it right now.
Again, code is raw and a work in progress so please no giggling. Oh this is a multi post... Code is too long.
<Manifest>
<Identity>
<ID>IsilonSNMP</ID>
<Version>1.0.1.2</Version>
</Identity>
<Name>IsilonSNMP</Name>
<References>
<Reference Alias="MicrosoftSystemCenterNetworkDeviceLibrary">
<ID>Microsoft.SystemCenter.NetworkDevice.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Snmp">
<ID>System.Snmp.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="SystemHardwareLibrary">
<ID>System.Hardware.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Windows">
<ID>Microsoft.Windows.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="SystemPerformanceLibrary">
<ID>System.Performance.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="System">
<ID>System.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="SC">
<ID>Microsoft.SystemCenter.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Health">
<ID>System.Health.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
</References>
</Manifest>
<TypeDefinitions>
<EntityTypes>
<ClassTypes>
<ClassType ID="IsilonSNMP.Class.IsilonCluster" Accessibility="Public" Abstract="false" Base="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice" Hosted="false" Singleton="false">
<Property ID="Hostname" Type="string" Key="false" CaseSensitive="false" Length="256" MinLength="0" />
<Property ID="ConfiguredNodes" Type="string" Key="false" CaseSensitive="false" Length="256" MinLength="0" />
<!-- <Property ID="NodeCommStr" Type="string" Key="false" CaseSensitive="false" Length="256" MinLength="0" /> -->
</ClassType>
<ClassType ID="IsilonSNMP.Class.IsilonCluster.Nodes" Accessibility="Public" Abstract="false" Base="SystemHardwareLibrary!System.Chassis" Hosted="true" Singleton="false">
<Property ID="Name" Type="string" Key="true" CaseSensitive="false" Length="256" MinLength="0" />
</ClassType>
<ClassType ID="IsilonSNMP.Class.IsilonCluster.PhysicalDisk" Accessibility="Public" Abstract="false" Base="SystemHardwareLibrary!System.PhysicalDisk" Hosted="true" Singleton="false">
<Property ID="Index" Type="string" Key="true" CaseSensitive="false" Length="256" MinLength="0" />
<!-- <Property ID="ConfiguredNodes" Type="string" Key="false" CaseSensitive="false" Length="256" MinLength="0" /> -->
<Property ID="NodeCommStr" Type="string" Key="false" CaseSensitive="false" Length="256" MinLength="0" />
<Property ID="BayIndex" Type="string" Key="false" CaseSensitive="false" Length="256" MinLength="0" />
</ClassType>
<ClassType ID="IsilonSNMP.Class.IsilonCluster.PhysicalFan" Accessibility="Public" Abstract="false" Base="SystemHardwareLibrary!System.Fan" Hosted="true" Singleton="false">
<Property ID="Index" Type="string" Key="true" CaseSensitive="false" Length="256" MinLength="0" />
<Property ID="NodeCommStr" Type="string" Key="false" CaseSensitive="false" Length="256" MinLength="0" />
<Property ID="FanNumber" Type="string" Key="false" CaseSensitive="false" Length="256" MinLength="0" />
</ClassType>
<ClassType ID="IsilonSNMP.Group.IsilonClusters" Accessibility="Public" Abstract="false" Base="System!System.Group" Hosted="false" Singleton="true" />
</ClassTypes>
<RelationshipTypes>
<RelationshipType ID="IsilonSNMP.Relationship.ClusterHostsNodes" Accessibility="Internal" Abstract="false" Base="System!System.Hosting">
<Source>IsilonSNMP.Class.IsilonCluster</Source>
<Target>IsilonSNMP.Class.IsilonCluster.Nodes</Target>
</RelationshipType>
<RelationshipType ID="IsilonSNMP.Relationship.IsilonClustersGroupContainsIsilonClusters" Accessibility="Public" Abstract="false" Base="System!System.Containment">
<Source>IsilonSNMP.Group.IsilonClusters</Source>
<Target>IsilonSNMP.Class.IsilonCluster</Target>
</RelationshipType>
<RelationshipType ID="IsilonSNMP.Relationship.NodesHostsPhysicalDisk" Accessibility="Public" Abstract="false" Base="System!System.Hosting">
<Source>IsilonSNMP.Class.IsilonCluster.Nodes</Source>
<Target>IsilonSNMP.Class.IsilonCluster.PhysicalDisk</Target>
</RelationshipType>
<RelationshipType ID="IsilonSNMP.Relationship.NodesHostsPhysicalFan" Accessibility="Public" Abstract="false" Base="System!System.Hosting">
<Source>IsilonSNMP.Class.IsilonCluster.Nodes</Source>
<Target>IsilonSNMP.Class.IsilonCluster.PhysicalFan</Target>
</RelationshipType>
</RelationshipTypes>
</EntityTypes>
<ModuleTypes>
<DataSourceModuleType ID="IsilonSNMP.DataSource.BasicSNMPProbe" Accessibility="Internal" Batching="false">
<Configuration>
<xsd:element minOccurs="1" name="Interval" type="xsd:integer" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="IPAddress" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="CommStr" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="OID" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
</Configuration>
<OverrideableParameters>
<OverrideableParameter ID="Interval" Selector="$Config/Interval$" ParameterType="int" />
</OverrideableParameters>
<ModuleImplementation Isolation="Any">
<Composite>
<MemberModules>
<DataSource ID="Scheduler" TypeID="System!System.Scheduler">
<Scheduler>
<SimpleReccuringSchedule>
<Interval>$Config/Interval$</Interval>
<SyncTime />
</SimpleReccuringSchedule>
<ExcludeDates />
</Scheduler>
</DataSource>
<ProbeAction ID="SNMPProbe" TypeID="Snmp!System.SnmpProbe">
<IsWriteAction>false</IsWriteAction>
<IP>$Config/IPAddress$</IP>
<CommunityString>$Config/CommStr$</CommunityString>
<SnmpVarBinds>
<SnmpVarBind>
<OID>$Config/OID$</OID>
<Syntax>0</Syntax>
<Value VariantType="8" />
</SnmpVarBind>
</SnmpVarBinds>
</ProbeAction>
<ConditionDetection ID="ValueFilter" TypeID="System!System.ExpressionFilter">
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>NotEqual</Operator>
<ValueExpression>
<Value Type="String" />
</ValueExpression>
</SimpleExpression>
</Expression>
</ConditionDetection>
</MemberModules>
<Composition>
<Node ID="ValueFilter">
<Node ID="SNMPProbe">
<Node ID="Scheduler" />
</Node>
</Node>
</Composition>
</Composite>
</ModuleImplementation>
<OutputType>Snmp!System.SnmpData</OutputType>
</DataSourceModuleType>
<DataSourceModuleType ID="IsilonSNMP.DataSource.DiscoverContainmentClasses" Accessibility="Internal" Batching="false">
<Configuration>
<IncludeSchemaTypes>
<SchemaType>System!System.ParamListSchema</SchemaType>
<SchemaType>System!System.Discovery.MapperSchema</SchemaType>
</IncludeSchemaTypes>
<xsd:element minOccurs="1" name="IPAddress" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="ClassID" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="InstanceSettings" type="SettingsType" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
</Configuration>
<ModuleImplementation Isolation="Any">
<Composite>
<MemberModules>
<DataSource ID="Scheduler" TypeID="System!System.Scheduler">
<Scheduler>
<SimpleReccuringSchedule>
<Interval>60</Interval>
<SyncTime />
</SimpleReccuringSchedule>
<ExcludeDates />
</Scheduler>
</DataSource>
<ConditionDetection ID="Mapper" TypeID="System!System.Discovery.ClassSnapshotDataMapper">
<ClassId>$Config/ClassID$</ClassId>
<InstanceSettings>$Config/InstanceSettings$</InstanceSettings>
</ConditionDetection>
</MemberModules>
<Composition>
<Node ID="Mapper">
<Node ID="Scheduler" />
</Node>
</Composition>
</Composite>
</ModuleImplementation>
<OutputType>System!System.Discovery.Data</OutputType>
</DataSourceModuleType>
<DataSourceModuleType ID="IsilonSNMP.DataSource.DiscoverCluster" Accessibility="Internal" Batching="false">
<Configuration>
<xsd:element minOccurs="1" name="Interval" type="xsd:integer" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="IP" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="CommunityString" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="SystemOID" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
</Configuration>
<OverrideableParameters>
<OverrideableParameter ID="Interval" Selector="$Config/Interval$" ParameterType="int" />
</OverrideableParameters>
<ModuleImplementation Isolation="Any">
<Composite>
<MemberModules>
<DataSource ID="Scheduler" TypeID="System!System.Scheduler">
<Scheduler>
<SimpleReccuringSchedule>
<Interval Unit="Seconds">$Config/Interval$</Interval>
</SimpleReccuringSchedule>
<ExcludeDates />
</Scheduler>
</DataSource>
<ProbeAction ID="Probe" TypeID="Snmp!System.SnmpProbe">
<IsWriteAction>false</IsWriteAction>
<IP>$Config/IP$</IP>
<CommunityString>$Config/CommunityString$</CommunityString>
<SnmpVarBinds>
<SnmpVarBind>
<OID>.1.3.6.1.4.1.12124.1.1.4.0</OID>
<Syntax>0</Syntax>
<Value VariantType="8" />
</SnmpVarBind>
<SnmpVarBind>
<OID>.1.3.6.1.4.1.12124.1.1.1.0</OID>
<Syntax>0</Syntax>
<Value VariantType="8" />
</SnmpVarBind>
<SnmpVarBind>
<OID>.1.3.6.1.2.1.1.5.0</OID>
<Syntax>0</Syntax>
<Value VariantType="8" />
</SnmpVarBind>
<SnmpVarBind>
<OID>.1.3.6.1.2.1.1.1.0</OID>
<Syntax>0</Syntax>
<Value VariantType="8" />
</SnmpVarBind>
<SnmpVarBind>
<OID>.1.3.6.1.2.1.1.4.0</OID>
<Syntax>0</Syntax>
<Value VariantType="8" />
</SnmpVarBind>
<SnmpVarBind>
<OID>.1.3.6.1.2.1.1.6.0</OID>
<Syntax>0</Syntax>
<Value VariantType="8" />
</SnmpVarBind>
<SnmpVarBind>
<OID>.1.3.6.1.2.1.1.2.0</OID>
<Syntax>0</Syntax>
<Value VariantType="8" />
</SnmpVarBind>
</SnmpVarBinds>
</ProbeAction>
<ConditionDetection ID="Mapper" TypeID="System!System.Discovery.FilteredClassSnapshotDataMapper">
<Expression>
<RegExExpression>
<ValueExpression>
<XPathQuery>/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>ContainsSubstring</Operator>
<Pattern>1.3.6.1.4.1.12124.</Pattern>
</RegExExpression>
</Expression>
<ClassId>$MPElement[Name="IsilonSNMP.Class.IsilonCluster"]$</ClassId>
<InstanceSettings>
<Settings>
<Setting>
<Name>$MPElement[Name="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</Name>
<Value>$Data/Source$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/Name$</Name>
<Value>$Data/SnmpVarBinds/SnmpVarBind[5]/Value$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/SystemDescription$</Name>
<Value>$Data/SnmpVarBinds/SnmpVarBind[4]/Value$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/SystemContact$</Name>
<Value>$Data/SnmpVarBinds/SnmpVarBind[3]/Value$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/SystemLocation$</Name>
<Value>$Data/SnmpVarBinds/SnmpVarBind[2]/Value$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/SystemOID$</Name>
<Value>$Data/SnmpVarBinds/SnmpVarBind[1]/Value$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="System!System.Entity"]/DisplayName$</Name>
<Value>$Data/SnmpVarBinds/SnmpVarBind[5]/Value$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="IsilonSNMP.Class.IsilonCluster"]/Hostname$</Name>
<Value>$Data/SnmpVarBinds/SnmpVarBind[6]/Value$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="IsilonSNMP.Class.IsilonCluster"]/ConfiguredNodes$</Name>
<Value>$Data/SnmpVarBinds/SnmpVarBind[7]/Value$</Value>
</Setting>
</Settings>
</InstanceSettings>
</ConditionDetection>
<ConditionDetection ID="SystemOIDFilter" TypeID="System!System.ExpressionFilter">
<Expression>
<RegExExpression>
<ValueExpression>
<Value>$Config/SystemOID$</Value>
</ValueExpression>
<Operator>ContainsSubstring</Operator>
<Pattern>1.3.6.1.4.1.12124.</Pattern>
</RegExExpression>
</Expression>
</ConditionDetection>
</MemberModules>
<Composition>
<Node ID="Mapper">
<Node ID="Probe">
<Node ID="SystemOIDFilter">
<Node ID="Scheduler" />
</Node>
</Node>
</Node>
</Composition>
</Composite>
</ModuleImplementation>
<OutputType>System!System.Discovery.Data</OutputType>
</DataSourceModuleType>
<DataSourceModuleType ID="IsilonSNMP.DataSource.DiscoverPhysicalDisk" Accessibility="Internal" Batching="false">
<Configuration>
<xsd:element minOccurs="1" name="IPAddress" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="CommStr" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="Interval" type="xsd:integer" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="ConfiguredNodes" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="BayIndex" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="NodeCommStr" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
</Configuration>
<OverrideableParameters>
<OverrideableParameter ID="Interval" Selector="$Config/Interval$" ParameterType="int" />
</OverrideableParameters>
<ModuleImplementation Isolation="Any">
<Composite>
<MemberModules>
<DataSource ID="Scheduler" TypeID="System!System.Scheduler">
<Scheduler>
<SimpleReccuringSchedule>
<Interval>$Config/Interval$</Interval>
<SyncTime />
</SimpleReccuringSchedule>
<ExcludeDates />
</Scheduler>
</DataSource>
<ProbeAction ID="ScriptDiscovery" TypeID="Windows!Microsoft.Windows.ScriptDiscoveryProbe">
<ScriptName>DiscoverIsilonDisk.vbs</ScriptName>
<Arguments>$Config/IPAddress$ $Config/CommStr$ $MPElement$ $Target/Id$ $Config/ConfiguredNodes$</Arguments>
<ScriptBody>
<![CDATA['Discover PhysicalDisk
Dim oAPI, oDiscoveryData, oInst, objWMIServices, objWMILocator, oArgs
set oArgs = Wscript.Arguments
if oArgs.Count <5 Then
Wscript.Quit -1
End If
DeviceIP = oArgs(0)
CommStr = oArgs(1)
SourceID = oArgs(2)
ManagedEntityId = oArgs(3)
StrConfiguredNodes = oArgs(4)
CommStr = Decode(CommStr)
ConfiguredNodesCommStr = cstr(CommStr)
wscript.echo CommStr
Set oAPI = CreateObject("MOM.ScriptAPI")
set oDiscoveryData = oAPI.CreateDiscoveryData(0, SourceId, ManagedEntityId)
Set objWMILocator = CreateObject("WbemScripting.SWbemLocator")
Set objWMIServices = objWMiLocator.ConnectServer("","root\snmp\localhost")
'Name community name
GetPhysicalDisks
'Created community names
For i = 1 to StrConfiguredNodes
CommStr = ConfiguredNodesCommStr & "_node_" & i
GetPhysicalDisks
Next
'Return all data to SCOM
Call oAPI.Return(oDiscoveryData)
Sub GetPhysicalDisks
on error resume next
Set objWmiNamedValueSet = CreateObject("WbemScripting.SWbemNamedValueSet")
objWmiNamedValueSet.Add "AgentAddress", cstr(DeviceIP)
objWmiNamedValueSet.Add "AgentReadCommunityName", cstr(CommStr)
Set colPhysicalDisk = objWmiServices.InstancesOf("SNMP_ISILON_MIB_diskTable", , objWMINamedValueset)
For each objItem in colPhysicalDisk
nIndex = objItem.diskBay
sDesc = objItem.diskSerialNumber
if nIndex > 0 then
set oInst = oDiscoveryData.CreateClassInstance("$MPElement[Name='IsilonSNMP.Class.IsilonCluster.PhysicalDisk']$")
call oInst.AddProperty("$MPElement[Name='MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice']/IPAddress$", DeviceIP)
call oInst.AddProperty("$MPElement[Name='IsilonSNMP.Class.IsilonCluster.PhysicalDisk']/Index$", cstr(CommStr) & "-" & cdbl(nIndex))
call oInst.AddProperty("$MPElement[Name='IsilonSNMP.Class.IsilonCluster.PhysicalDisk']/NodeCommStr$", Encode(CommStr))
call oInst.AddProperty("$MPElement[Name='IsilonSNMP.Class.IsilonCluster.PhysicalDisk']/BayIndex$", cdbl(nIndex))
call oInst.AddProperty("$MPElement[Name='IsilonSNMP.Class.IsilonCluster.Nodes']/Name$", "Cluster")
call oInst.AddProperty("$MPElement[Name='System!System.Entity']/DisplayName$", "SNMP Host " & cstr(CommStr) & " - Bay " & nIndex & " - Serial Number " & HexToString(sDesc))
'call oInst.AddProperty("$MPElement[Name='System!System.Entity']/DisplayName$", HexToString(sDesc))
call oDiscoveryData.AddInstance(oInst)
'Test Section
'wscript.echo Base64Encode(CommStr)
'wscript.echo Base64Encoder(CommStr)
'wscript.Echo CommStr
'wscript.Echo nIndex
'Wscript.Echo HexToString(sDesc)
'wscript.echo cdbl(nIndex) & cstr(CommStr)
end if
Next
on error goto 0
End Sub
Function Decode(strB64)
strXML = "<B64DECODE xmlns:dt=" & Chr(34) & _
"urn:schemas-microsoft-com:datatypes" & Chr(34) & " " & _
"dt:dt=" & Chr(34) & "bin.base64" & Chr(34) & ">" & _
strB64 & "</B64DECODE>"
Set oXMLDoc = CreateObject("MSXML2.DOMDocument.3.0")
oXMLDoc.LoadXML(strXML)
decode = oXMLDoc.selectsinglenode("B64DECODE").nodeTypedValue
set oXMLDoc = nothing
End Function
Function Encode(Str)
'Use ADODB.Stream to write Ansi string to Unicode stream
Set objStream = CreateObject("ADODB.Stream")
objStream.Type = 2
objStream.Open
objStream.Charset = "unicode"
objStream.WriteText Str
objstream.Flush
'Read the stream back as a byte array
objStream.Position = 0
objStream.Type = 1
temp = objstream.read(2) 'read two bytes of the stream to discard the byte order mark
bArray = objStream.Read
objStream.Close
'Convert byte array to Base64
set objXML = createobject("MSXML2.DOMDocument.3.0")
Set objNode = objXML.createElement("b64")
objNode.dataType = "bin.base64"
objNode.nodeTypedValue = bArray
Encode = objNode.Text
Set Stream = Nothing
set objNode = nothing
set objXML = nothing
End Function
Function HexToString(str)
on error resume next
sOutput = ""
For x = 1 To len(str) Step 2
sChar = Chr(Clng("&h" & Mid(str,x,2)))
sOutput = sOutput & sChar
Next
if err.number = 0 then
HexToString = sOutput
Else
HexToString = str
end if
End Function
set oInst = nothing
set oDiscoveryData = nothing
set oArgs = nothing
set oAPI = nothing
set objWMILocator = nothing
set objWMIServices = nothing
set objWMINamedValueSet = nothing
]]>
</ScriptBody>
<TimeoutSeconds>120</TimeoutSeconds>
</ProbeAction>
</MemberModules>
<Composition>
<Node ID="ScriptDiscovery">
<Node ID="Scheduler" />
</Node>
</Composition>
</Composite>
</ModuleImplementation>
<OutputType>System!System.Discovery.Data</OutputType>
</DataSourceModuleType><DataSourceModuleType ID="IsilonSNMP.DataSource.DiscoverPhysicalFan" Accessibility="Internal" Batching="false">
<Configuration>
<xsd:element minOccurs="1" name="IPAddress" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="CommStr" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="Interval" type="xsd:integer" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="ConfiguredNodes" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="FanNumber" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="NodeCommStr" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="FanSpeedHighCritical" type="xsd:integer" />
<xsd:element minOccurs="1" name="FanSpeedLowWarn" type="xsd:integer" />
<xsd:element minOccurs="1" name="FanSpeedLowCritical" type="xsd:integer" />
</Configuration>
<OverrideableParameters>
<OverrideableParameter ID="Interval" Selector="$Config/Interval$" ParameterType="int" />
<OverrideableParameter ID="FanSpeedHighCritical" Selector="$Config/FanSpeedHighCritical$" ParameterType="int" />
<OverrideableParameter ID="FanSpeedLowWarn" Selector="$Config/FanSpeedLowWarn$" ParameterType="int" />
<OverrideableParameter ID="FanSpeedLowCritical" Selector="$Config/FanSpeedLowCritical$" ParameterType="int" />
</OverrideableParameters>
<ModuleImplementation Isolation="Any">
<Composite>
<MemberModules>
<DataSource ID="Scheduler" TypeID="System!System.Scheduler">
<Scheduler>
<SimpleReccuringSchedule>
<Interval>$Config/Interval$</Interval>
<SyncTime />
</SimpleReccuringSchedule>
<ExcludeDates />
</Scheduler>
</DataSource>
<ProbeAction ID="ScriptDiscovery" TypeID="Windows!Microsoft.Windows.ScriptDiscoveryProbe">
<ScriptName>DiscoverIsilonPhysicalFan.vbs</ScriptName>
<Arguments>$Config/IPAddress$ $Config/CommStr$ $MPElement$ $Target/Id$ $Config/ConfiguredNodes$</Arguments>
<ScriptBody>
<![CDATA['Discover PhysicalFan
Dim oAPI, oDiscoveryData, oInst, objWMIServices, objWMILocator, oArgs
set oArgs = Wscript.Arguments
if oArgs.Count <5 Then
Wscript.Quit -1
End If
DeviceIP = oArgs(0)
CommStr = oArgs(1)
SourceID = oArgs(2)
ManagedEntityId = oArgs(3)
StrConfiguredNodes = oArgs(4)
CommStr = Decode(CommStr)
ConfiguredNodesCommStr = cstr(CommStr)
wscript.echo CommStr
Set oAPI = CreateObject("MOM.ScriptAPI")
set oDiscoveryData = oAPI.CreateDiscoveryData(0, SourceId, ManagedEntityId)
Set objWMILocator = CreateObject("WbemScripting.SWbemLocator")
Set objWMIServices = objWMiLocator.ConnectServer("","root\snmp\localhost")
'Name community name
GetPhysicalFan
'Created community names
For i = 1 to StrConfiguredNodes
CommStr = ConfiguredNodesCommStr & "_node_" & i
GetPhysicalFan
Next
'Return all data to SCOM
Call oAPI.Return(oDiscoveryData)
Sub GetPhysicalFan
on error resume next
Set objWmiNamedValueSet = CreateObject("WbemScripting.SWbemNamedValueSet")
objWmiNamedValueSet.Add "AgentAddress", cstr(DeviceIP)
objWmiNamedValueSet.Add "AgentReadCommunityName", cstr(CommStr)
Set colPhysicalFan = objWmiServices.InstancesOf("SNMP_ISILON_MIB_FanTable", , objWMINamedValueset)
For each objItem in colPhysicalFan
nIndex = objItem.fanNumber
sDesc = objItem.fanDescription
if nIndex > 0 then
set oInst = oDiscoveryData.CreateClassInstance("$MPElement[Name='IsilonSNMP.Class.IsilonCluster.PhysicalFan']$")
call oInst.AddProperty("$MPElement[Name='MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice']/IPAddress$", DeviceIP)
call oInst.AddProperty("$MPElement[Name='IsilonSNMP.Class.IsilonCluster.PhysicalFan']/Index$", cstr(CommStr) & "-" & cdbl(nIndex))
call oInst.AddProperty("$MPElement[Name='IsilonSNMP.Class.IsilonCluster.PhysicalFan']/NodeCommStr$", Encode(CommStr))
call oInst.AddProperty("$MPElement[Name='IsilonSNMP.Class.IsilonCluster.PhysicalFan']/FanNumber$", cdbl(nIndex))
call oInst.AddProperty("$MPElement[Name='IsilonSNMP.Class.IsilonCluster.Nodes']/Name$", "Cluster")
'call oInst.AddProperty("$MPElement[Name='System!System.Entity']/DisplayName$", "SNMP Host " & cstr(CommStr) & " - Bay " & nIndex & " - Serial Number " & HexToString(sDesc))
call oInst.AddProperty("$MPElement[Name='System!System.Entity']/DisplayName$", "SNMP Host " & cstr(CommStr) & " - " & HexToString(sDesc))
call oDiscoveryData.AddInstance(oInst)
'Test Section
'wscript.echo Base64Encode(CommStr)
'wscript.echo Base64Encoder(CommStr)
'wscript.Echo CommStr
'wscript.Echo nIndex
'Wscript.Echo HexToString(sDesc)
'wscript.echo cdbl(nIndex) & cstr(CommStr)
end if
Next
on error goto 0
End Sub
Function Decode(strB64)
strXML = "<B64DECODE xmlns:dt=" & Chr(34) & _
"urn:schemas-microsoft-com:datatypes" & Chr(34) & " " & _
"dt:dt=" & Chr(34) & "bin.base64" & Chr(34) & ">" & _
strB64 & "</B64DECODE>"
Set oXMLDoc = CreateObject("MSXML2.DOMDocument.3.0")
oXMLDoc.LoadXML(strXML)
decode = oXMLDoc.selectsinglenode("B64DECODE").nodeTypedValue
set oXMLDoc = nothing
End Function
Function Encode(Str)
'Use ADODB.Stream to write Ansi string to Unicode stream
Set objStream = CreateObject("ADODB.Stream")
objStream.Type = 2
objStream.Open
objStream.Charset = "unicode"
objStream.WriteText Str
objstream.Flush
'Read the stream back as a byte array
objStream.Position = 0
objStream.Type = 1
temp = objstream.read(2) 'read two bytes of the stream to discard the byte order mark
bArray = objStream.Read
objStream.Close
'Convert byte array to Base64
set objXML = createobject("MSXML2.DOMDocument.3.0")
Set objNode = objXML.createElement("b64")
objNode.dataType = "bin.base64"
objNode.nodeTypedValue = bArray
Encode = objNode.Text
Set Stream = Nothing
set objNode = nothing
set objXML = nothing
End Function
Function HexToString(str)
on error resume next
sOutput = ""
For x = 1 To len(str) Step 2
sChar = Chr(Clng("&h" & Mid(str,x,2)))
sOutput = sOutput & sChar
Next
if err.number = 0 then
HexToString = sOutput
Else
HexToString = str
end if
End Function
set oInst = nothing
set oDiscoveryData = nothing
set oArgs = nothing
set oAPI = nothing
set objWMILocator = nothing
set objWMIServices = nothing
set objWMINamedValueSet = nothing
]]>
</ScriptBody>
<TimeoutSeconds>120</TimeoutSeconds>
</ProbeAction>
</MemberModules>
<Composition>
<Node ID="ScriptDiscovery">
<Node ID="Scheduler" />
</Node>
</Composition>
</Composite>
</ModuleImplementation>
<OutputType>System!System.Discovery.Data</OutputType>
</DataSourceModuleType>
</ModuleTypes>
<MonitorTypes>
<UnitMonitorType ID="IsilonSNMP.MonitorType.PhysicalDiskStatus" Accessibility="Internal">
<MonitorTypeStates>
<MonitorTypeState ID="PhysicalDiskOK" NoDetection="false" />
<MonitorTypeState ID="PhysicalDiskNotOK" NoDetection="false" />
</MonitorTypeStates>
<Configuration>
<xsd:element minOccurs="1" name="Interval" type="xsd:integer" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="IPAddress" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="OID" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="NodeCommStr" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
</Configuration>
<MonitorImplementation>
<MemberModules>
<DataSource ID="DS1" TypeID="IsilonSNMP.DataSource.BasicSNMPProbe">
<Interval>$Config/Interval$</Interval>
<IPAddress>$Config/IPAddress$</IPAddress>
<CommStr>$Config/NodeCommStr$</CommStr>
<OID>$Config/OID$</OID>
</DataSource>
<ConditionDetection ID="CDPhysicalDiskOK" TypeID="System!System.ExpressionFilter">
<Expression>
<RegExExpression>
<ValueExpression>
<XPathQuery Type="String">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>ContainsSubstring</Operator>
<Pattern>HEALTHY</Pattern>
</RegExExpression>
</Expression>
</ConditionDetection>
<ConditionDetection ID="CDPhysicalDiskNotOK" TypeID="System!System.ExpressionFilter">
<Expression>
<RegExExpression>
<ValueExpression>
<XPathQuery Type="String">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>DoesNotContainSubstring</Operator>
<Pattern>HEALTHY</Pattern>
</RegExExpression>
</Expression>
</ConditionDetection>
</MemberModules>
<RegularDetections>
<RegularDetection MonitorTypeStateID="PhysicalDiskOK">
<Node ID="CDPhysicalDiskOK">
<Node ID="DS1" />
</Node>
</RegularDetection>
<RegularDetection MonitorTypeStateID="PhysicalDiskNotOK">
<Node ID="CDPhysicalDiskNotOK">
<Node ID="DS1" />
</Node>
</RegularDetection>
</RegularDetections>
</MonitorImplementation>
</UnitMonitorType>
<UnitMonitorType ID="IsilonSNMP.MonitorType.PhysicalFanStatus" Accessibility="Internal">
<MonitorTypeStates>
<MonitorTypeState ID="PhysicalFanOK" NoDetection="false" />
<MonitorTypeState ID="PhysicalFanWarn" NoDetection="false" />
<MonitorTypeState ID="PhysicalFanCritical" NoDetection="false" />
</MonitorTypeStates>
<Configuration>
<xsd:element minOccurs="1" name="Interval" type="xsd:integer" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="IPAddress" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="OID" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="NodeCommStr" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
<xsd:element minOccurs="1" name="FanSpeedHighCritical" type="xsd:integer" />
<xsd:element minOccurs="1" name="FanSpeedLowWarn" type="xsd:integer" />
<xsd:element minOccurs="1" name="FanSpeedLowCritical" type="xsd:integer" />
</Configuration>
<OverrideableParameters>
<OverrideableParameter ID="Interval" Selector="$Config/Interval$" ParameterType="int" />
<OverrideableParameter ID="FanSpeedHighCritical" Selector="$Config/FanSpeedHighCritical$" ParameterType="int" />
<OverrideableParameter ID="FanSpeedLowWarn" Selector="$Config/FanSpeedLowWarn$" ParameterType="int" />
<OverrideableParameter ID="FanSpeedLowCritical" Selector="$Config/FanSpeedLowCritical$" ParameterType="int" />
</OverrideableParameters>
<MonitorImplementation>
<MemberModules>
<DataSource ID="DS1" TypeID="IsilonSNMP.DataSource.BasicSNMPProbe">
<Interval>$Config/Interval$</Interval>
<IPAddress>$Config/IPAddress$</IPAddress>
<CommStr>$Config/NodeCommStr$</CommStr>
<OID>$Config/OID$</OID>
</DataSource>
<ConditionDetection ID="CDPhysicalFanOK" TypeID="System!System.ExpressionFilter">
<Expression>
<And>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="Integer">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>Less</Operator>
<ValueExpression>
<Value Type="Integer">$Config/FanSpeedHighCritical$</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="Integer">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>Greater</Operator>
<ValueExpression>
<Value Type="Integer">$Config/FanSpeedLowWarn$</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</And>
</Expression>
</ConditionDetection>
<ConditionDetection ID="CDPhysicalFanWarn" TypeID="System!System.ExpressionFilter">
<Expression>
<And>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="Integer">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>LessEqual</Operator>
<ValueExpression>
<Value Type="Integer">$Config/FanSpeedLowWarn$</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="Integer">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>Greater</Operator>
<ValueExpression>
<Value Type="Integer">$Config/FanSpeedLowWarn$</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</And>
</Expression>
</ConditionDetection>
<ConditionDetection ID="CDPhysicalFanCritical" TypeID="System!System.ExpressionFilter">
<Expression>
<Or>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="Integer">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>GreaterEqual</Operator>
<ValueExpression>
<Value Type="Integer">$Config/FanSpeedHighCritical$</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="Integer">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>LessEqual</Operator>
<ValueExpression>
<Value Type="Integer">$Config/FanSpeedLowCritical$</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</Or>
</Expression>
</ConditionDetection>
</MemberModules>
<RegularDetections>
<RegularDetection MonitorTypeStateID="PhysicalFanOK">
<Node ID="CDPhysicalFanOK">
<Node ID="DS1" />
</Node>
</RegularDetection>
<RegularDetection MonitorTypeStateID="PhysicalFanWarn">
<Node ID="CDPhysicalFanWarn">
<Node ID="DS1" />
</Node>
</RegularDetection>
<RegularDetection MonitorTypeStateID="PhysicalFanCritical">
<Node ID="CDPhysicalFanCritical">
<Node ID="DS1" />
</Node>
</RegularDetection>
</RegularDetections>
</MonitorImplementation>
</UnitMonitorType>
</MonitorTypes>
</TypeDefinitions>
<Monitoring>
<Discoveries>
<Discovery ID="IsilonSNMP.Discovery.Cluster" Enabled="true" Target="IsilonSNMP.Class.IsilonCluster" ConfirmDelivery="true" Remotable="true" Priority="Normal">
<Category>Discovery</Category>
<DiscoveryTypes>
<DiscoveryClass TypeID="IsilonSNMP.Class.IsilonCluster.Nodes" />
<DiscoveryRelationship TypeID="IsilonSNMP.Relationship.ClusterHostsNodes" />
</DiscoveryTypes>
<DataSource ID="DS1" TypeID="IsilonSNMP.DataSource.DiscoverContainmentClasses">
<IPAddress>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</IPAddress>
<ClassID>$MPElement[Name="IsilonSNMP.Class.IsilonCluster.Nodes"]$</ClassID>
<InstanceSettings>
<Settings>
<Setting>
<Name>$MPElement[Name="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</Name>
<Value>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="System!System.Entity"]/DisplayName$</Name>
<Value>Cluster</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="IsilonSNMP.Class.IsilonCluster.Nodes"]/Name$</Name>
<Value>Cluster</Value>
</Setting>
</Settings>
</InstanceSettings>
</DataSource>
</Discovery>
<Discovery ID="IsilonSNMP.Discovery.IsilonCluster" Enabled="true" Target="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice" ConfirmDelivery="true" Remotable="true" Priority="Normal">
<Category>Discovery</Category>
<DiscoveryTypes>
<DiscoveryClass TypeID="IsilonSNMP.Class.IsilonCluster" />
</DiscoveryTypes>
<DataSource ID="DS1" TypeID="IsilonSNMP.DataSource.DiscoverCluster">
<Interval>600</Interval>
<IP>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</IP>
<CommunityString>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/CommunityString$</CommunityString>
<SystemOID>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/SystemOID$</SystemOID>
</DataSource>
</Discovery>
<Discovery ID="IsilonSNMP.Discovery.IsilonClustersGroup" Enabled="true" Target="IsilonSNMP.Group.IsilonClusters" ConfirmDelivery="true" Remotable="true" Priority="Normal">
<Category>Discovery</Category>
<DiscoveryTypes>
<DiscoveryRelationship TypeID="IsilonSNMP.Relationship.IsilonClustersGroupContainsIsilonClusters" />
</DiscoveryTypes>
<DataSource ID="GP1" TypeID="SC!Microsoft.SystemCenter.GroupPopulator">
<RuleId>$MPElement$</RuleId>
<GroupInstanceId>$MPElement[Name="IsilonSNMP.Group.IsilonClusters"]$</GroupInstanceId>
<MembershipRules>
<MembershipRule>
<MonitoringClass>$MPElement[Name="IsilonSNMP.Class.IsilonCluster"]$</MonitoringClass>
<RelationshipClass>$MPElement[Name="IsilonSNMP.Relationship.IsilonClustersGroupContainsIsilonClusters"]$</RelationshipClass>
<Expression>
<RegExExpression>
<ValueExpression>
<Property>$MPElement[Name="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</Property>
</ValueExpression>
<Operator>ContainsSubstring</Operator>
<Pattern>.</Pattern>
</RegExExpression>
</Expression>
</MembershipRule>
</MembershipRules>
</DataSource>
</Discovery>
<Discovery ID="IsilonSNMP.Discovery.PhysicalDisk" Enabled="true" Target="IsilonSNMP.Class.IsilonCluster.Nodes" ConfirmDelivery="true" Remotable="true" Priority="Normal">
<Category>Discovery</Category>
<DiscoveryTypes>
<DiscoveryClass TypeID="IsilonSNMP.Class.IsilonCluster.PhysicalDisk" />
<DiscoveryRelationship TypeID="IsilonSNMP.Relationship.NodesHostsPhysicalDisk" />
</DiscoveryTypes>
<DataSource ID="DS1" TypeID="IsilonSNMP.DataSource.DiscoverPhysicalDisk">
<IPAddress>$Target/Host/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</IPAddress>
<CommStr>$Target/Host/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/CommunityString$</CommStr>
<Interval>7800</Interval>
<ConfiguredNodes>$Target/Host/Property[Type="IsilonSNMP.Class.IsilonCluster"]/ConfiguredNodes$</ConfiguredNodes>
<BayIndex>$MPElement[Name="IsilonSNMP.Class.IsilonCluster.PhysicalDisk"]/BayIndex$</BayIndex>
<NodeCommStr>$MPElement[Name="IsilonSNMP.Class.IsilonCluster.PhysicalDisk"]/NodeCommStr$</NodeCommStr>
</DataSource>
</Discovery>
<Discovery ID="IsilonSNMP.Discovery.PhysicalFan" Enabled="true" Target="IsilonSNMP.Class.IsilonCluster.Nodes" ConfirmDelivery="true" Remotable="true" Priority="Normal">
<Category>Discovery</Category>
<DiscoveryTypes>
<DiscoveryClass TypeID="IsilonSNMP.Class.IsilonCluster.PhysicalFan" />
<DiscoveryRelationship TypeID="IsilonSNMP.Relationship.NodesHostsPhysicalFan" />
</DiscoveryTypes>
<DataSource ID="DS1" TypeID="IsilonSNMP.DataSource.DiscoverPhysicalFan">
<IPAddress>$Target/Host/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</IPAddress>
<CommStr>$Target/Host/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/CommunityString$</CommStr>
<Interval>8000</Interval>
<ConfiguredNodes>$Target/Host/Property[Type="IsilonSNMP.Class.IsilonCluster"]/ConfiguredNodes$</ConfiguredNodes>
<FanNumber>$MPElement[Name="IsilonSNMP.Class.IsilonCluster.PhysicalFan"]/FanNumber$</FanNumber>
<NodeCommStr>$MPElement[Name="IsilonSNMP.Class.IsilonCluster.PhysicalFan"]/NodeCommStr$</NodeCommStr>
<FanSpeedHighCritical>14500</FanSpeedHighCritical>
<FanSpeedLowWarn>3400</FanSpeedLowWarn>
<FanSpeedLowCritical>3000</FanSpeedLowCritical>
</DataSource>
</Discovery>
</Discoveries>
<Monitors>
<UnitMonitor ID="UIGeneratedMonitore2c4dd195da8497bb99c9711e4134d70" Accessibility="Public" Enabled="true" Target="IsilonSNMP.Class.IsilonCluster" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="Snmp!System.SnmpTrapProvider.2SingleEvent2StateMonitorType" ConfirmDelivery="false">
<Category>Custom</Category>
<AlertSettings AlertMessage="UIGeneratedMonitore2c4dd195da8497bb99c9711e4134d70_AlertMessageResourceID">
<AlertOnState>Warning</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>MatchMonitorHealth</AlertSeverity>
</AlertSettings>
<OperationalStates>
<OperationalState ID="UIGeneratedOpStateId843498792d7d4fbf80d83f3939255dd9" MonitorTypeStateID="SecondEventRaised" HealthState="Success" />
<OperationalState ID="UIGeneratedOpStateId9fd776cd21a747c5994738e863b31fb9" MonitorTypeStateID="FirstEventRaised" HealthState="Warning" />
</OperationalStates>
<Configuration>
<FirstIP>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</FirstIP>
<FirstCommunityString>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/CommunityString$</FirstCommunityString>
<FirstAllTraps>false</FirstAllTraps>
<FirstVersion>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/Version$</FirstVersion>
<FirstOIDProps>
<OIDProp>.1.3.6.1.4.1.12124.1.1.2.0</OIDProp>
</FirstOIDProps>
<FirstExpression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">1</Value>
</ValueExpression>
</SimpleExpression>
</FirstExpression>
<SecondIP>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</SecondIP>
<SecondCommunityString>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/CommunityString$</SecondCommunityString>
<SecondAllTraps>false</SecondAllTraps>
<SecondVersion>$Target/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/Version$</SecondVersion>
<SecondOIDProps>
<OIDProp>.1.3.6.1.4.1.12124.1.1.2.0</OIDProp>
</SecondOIDProps>
<SecondExpression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">/DataItem/SnmpVarBinds/SnmpVarBind[1]/Value</XPathQuery>
</ValueExpression>
<Operator>NotEqual</Operator>
<ValueExpression>
<Value Type="String">1</Value>
</ValueExpression>
</SimpleExpression>
</SecondExpression>
</Configuration>
</UnitMonitor>
<UnitMonitor ID="IsilonSNMP.Monitor.PhysicalDiskStatus" Accessibility="Internal" Enabled="true" Target="IsilonSNMP.Class.IsilonCluster.PhysicalDisk" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="IsilonSNMP.MonitorType.PhysicalDiskStatus" ConfirmDelivery="true">
<Category>AvailabilityHealth</Category>
<AlertSettings AlertMessage="IsilonSNMP.Monitor.PhysicalDiskStatus_AlertMessageResourceID">
<AlertOnState>Warning</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>MatchMonitorHealth</AlertSeverity>
<AlertParameters>
<AlertParameter1>$Target/Property[Type="System!System.Entity"]/DisplayName$</AlertParameter1>
<AlertParameter2>$Data/Context/SnmpVarBinds/SnmpVarBind[1]/Value$</AlertParameter2>
</AlertParameters>
</AlertSettings>
<OperationalStates>
<OperationalState ID="IsilonSNMP.Monitor.PhysicalDiskStatus_PhysicalDiskOK" MonitorTypeStateID="PhysicalDiskOK" HealthState="Success" />
<OperationalState ID="IsilonSNMP.Monitor.PhysicalDiskStatus_PhysicalDiskNotOK" MonitorTypeStateID="PhysicalDiskNotOK" HealthState="Warning" />
</OperationalStates>
<Configuration>
<Interval>120</Interval>
<IPAddress>$Target/Host/Host/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</IPAddress>
<OID>.1.3.6.1.4.1.12124.2.52.1.5.$Target/Property[Type="IsilonSNMP.Class.IsilonCluster.PhysicalDisk"]/BayIndex$</OID>
<NodeCommStr>$Target/Property[Type="IsilonSNMP.Class.IsilonCluster.PhysicalDisk"]/NodeCommStr$</NodeCommStr>
</Configuration>
</UnitMonitor>
<UnitMonitor ID="IsilonSNMP.Monitor.PhysicalFanStatus" Accessibility="Internal" Enabled="true" Target="IsilonSNMP.Class.IsilonCluster.PhysicalFan" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="IsilonSNMP.MonitorType.PhysicalFanStatus" ConfirmDelivery="true">
<Category>AvailabilityHealth</Category>
<AlertSettings AlertMessage="IsilonSNMP.Monitor.PhysicalFanStatus_AlertMessageResourceID">
<AlertOnState>Warning</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>MatchMonitorHealth</AlertSeverity>
<AlertParameters>
<AlertParameter1>$Target/Property[Type="System!System.Entity"]/DisplayName$</AlertParameter1>
<AlertParameter2>$Data/Context/SnmpVarBinds/SnmpVarBind[1]/Value$</AlertParameter2>
</AlertParameters>
</AlertSettings>
<OperationalStates>
<OperationalState ID="IsilonSNMP.Monitor.PhysicalFanStatus_PhysicalFanOK" MonitorTypeStateID="PhysicalFanOK" HealthState="Success" />
<OperationalState ID="IsilonSNMP.Monitor.PhysicalFanStatus_PhysicalFanWarn" MonitorTypeStateID="PhysicalFanWarn" HealthState="Warning" />
<OperationalState ID="IsilonSNMP.Monitor.PhysicalFanStatus_PhysicalFanCritical" MonitorTypeStateID="PhysicalFanCritical" HealthState="Error" />
</OperationalStates>
<Configuration>
<Interval>120</Interval>
<IPAddress>$Target/Host/Host/Property[Type="MicrosoftSystemCenterNetworkDeviceLibrary!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</IPAddress>
<OID>.1.3.6.1.4.1.12124.2.53.1.4.$Target/Property[Type="IsilonSNMP.Class.IsilonCluster.PhysicalFan"]/FanNumber$</OID>
<NodeCommStr>$Target/Property[Type="IsilonSNMP.Class.IsilonCluster.PhysicalFan"]/NodeCommStr$</NodeCommStr>
<FanSpeedHighCritical>14500</FanSpeedHighCritical>
<FanSpeedLowWarn>3400</FanSpeedLowWarn>
<FanSpeedLowCritical>3000</FanSpeedLowCritical>
</Configuration>
</UnitMonitor>
<DependencyMonitor ID="IsilonSNMP.Monitor.ClusterPhysicalDiskAvailabilityDependency" Accessibility="Internal" Enabled="true" Target="IsilonSNMP.Class.IsilonCluster.Nodes" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" RelationshipType="IsilonSNMP.Relationship.NodesHostsPhysicalDisk" MemberMonitor="IsilonSNMP.Monitor.PhysicalDiskStatus">
<Category>AvailabilityHealth</Category>
<Algorithm>WorstOf</Algorithm>
<MemberUnAvailable>Error</MemberUnAvailable>
</DependencyMonitor>
<DependencyMonitor ID="IsilonSNMP.Monitor.ClusterPhysicalFanAvailabilityDependency" Accessibility="Internal" Enabled="true" Target="IsilonSNMP.Class.IsilonCluster.Nodes" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" RelationshipType="IsilonSNMP.Relationship.NodesHostsPhysicalFan" MemberMonitor="IsilonSNMP.Monitor.PhysicalFanStatus">
<Category>AvailabilityHealth</Category>
<Algorithm>WorstOf</Algorithm>
<MemberUnAvailable>Error</MemberUnAvailable>
</DependencyMonitor>
<DependencyMonitor ID="IsilonSNMP.Monitor.ClusterClusterAvailabilityDependency" Accessibility="Internal" Enabled="true" Target="IsilonSNMP.Class.IsilonCluster" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" RelationshipType="IsilonSNMP.Relationship.ClusterHostsNodes" MemberMonitor="Health!System.Health.AvailabilityState">
<Category>AvailabilityHealth</Category>
<Algorithm>WorstOf</Algorithm>
<MemberUnAvailable>Error</MemberUnAvailable>
</DependencyMonitor>
</Monitors>
</Monitoring>
<Presentation>
<StringResources>
<StringResource ID="UIGeneratedMonitore2c4dd195da8497bb99c9711e4134d70_AlertMessageResourceID" />
<StringResource ID="AlertMessageIDb1a3848769824949889fcc4c159cf462" />
<StringResource ID="IsilonSNMP.Monitor.PhysicalDiskStatus_AlertMessageResourceID" />
<StringResource ID="IsilonSNMP.Monitor.PhysicalFanStatus_AlertMessageResourceID" />
</StringResources>
</Presentation>
<LanguagePacks>
<LanguagePack ID="ENU" IsDefault="true">
<DisplayStrings>
<DisplayString ElementID="IsilonSNMP">
<Name>Isilon SNMP MP</Name>
<Description>Management pack to discover a Isilon cluster running OneFS 5.5</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Class.IsilonCluster">
<Name>Isilon Cluster</Name>
<Description>Isilon SNMP Device</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Class.IsilonCluster" SubElementID="Hostname">
<Name>Hostname</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Class.IsilonCluster" SubElementID="ConfiguredNodes">
<Name>ConfiguredNodes</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Class.IsilonCluster.Nodes" SubElementID="Name">
<Name>Name</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Class.IsilonCluster.Nodes">
<Name>Isilon Cluster Hosts Nodes</Name>
<Description>Containment class for the Isilon cluster with components such as hard disks, fans, power supplies, etc.</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Relationship.ClusterHostsNodes">
<Name>Isilon Cluster Hosts Nodes</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Discovery.IsilonCluster">
<Name>Discover Isilon Cluster</Name>
<Description>Discovery of the Isilon Cluster using OID strings from RFC1213.</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.DataSource.BasicSNMPProbe">
<Name>Isilon Basic Probe Data Source</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.DataSource.DiscoverCluster">
<Name>Discover Isilon Cluster</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Relationship.IsilonClustersGroupContainsIsilonClusters">
<Name>Isilon Devices Group Contains Isilon Cluster</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Discovery.Cluster">
<Name>Discover Isilon Cluster Containment Class</Name>
<Description>Discovers the Cluster containment class, which hosts managed objects such as fans</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Discovery.IsilonClustersGroup">
<Name>Isilon Deivce Group Populator</Name>
</DisplayString>
<DisplayString ElementID="UIGeneratedMonitore2c4dd195da8497bb99c9711e4134d70">
<Name>PlaceHolder</Name>
<Description>Place Holder to detect isilon cluster</Description>
</DisplayString>
<DisplayString ElementID="UIGeneratedMonitore2c4dd195da8497bb99c9711e4134d70" SubElementID="UIGeneratedOpStateId843498792d7d4fbf80d83f3939255dd9">
<Name>Second Event Raised</Name>
</DisplayString>
<DisplayString ElementID="UIGeneratedMonitore2c4dd195da8497bb99c9711e4134d70" SubElementID="UIGeneratedOpStateId9fd776cd21a747c5994738e863b31fb9">
<Name>First Event Raised</Name>
</DisplayString>
<DisplayString ElementID="UIGeneratedMonitore2c4dd195da8497bb99c9711e4134d70_AlertMessageResourceID">
<Name>PlaceHolder</Name>
<Description>placeholder alert to detect isilon</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.PhysicalDiskStatus">
<Name>Isilon PhysicalDisk Status Monitor</Name>
<Description>Monitor that generates an alert when the PhysicalDisk status is not ok.</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.PhysicalDiskStatus" SubElementID="IsilonSNMP.Monitor.PhysicalDiskStatus_PhysicalDiskOK">
<Name>PhysicalDiskOK</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.PhysicalDiskStatus" SubElementID="IsilonSNMP.Monitor.PhysicalDiskStatus_PhysicalDiskNotOK">
<Name>PhysicalDiskOK</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.PhysicalDiskStatus_AlertMessageResourceID">
<Name>Isilon PhysicalDisk Status</Name>
<Description>The Disk ({0}) is in a warning or error state. The Disk state is: {1}.</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Class.IsilonCluster.PhysicalDisk">
<Name>Isilon Disk</Name>
<Description>Disk</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Class.IsilonCluster.PhysicalDisk" SubElementID="Index">
<Name>Index</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Relationship.NodesHostsPhysicalDisk">
<Name>Isilon Cluster Hosts PhysicalDisk</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Discovery.PhysicalDisk">
<Name>Discover Isilon Cluster Physical Disks</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.DataSource.DiscoverPhysicalDisk">
<Name>Discover Isilon Cluster PhysicalDisk</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.ClusterPhysicalDiskAvailabilityDependency">
<Name>Isilon Disk</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.PhysicalFanStatus">
<Name>Isilon PhysicalFan Status Monitor</Name>
<Description>Monitor that generates an alert when the PhysicalFan speed is not within a premited range.</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.PhysicalFanStatus" SubElementID="IsilonSNMP.Monitor.PhysicalFanStatus_PhysicalFanOK">
<Name>PhysicalFanOK</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.PhysicalFanStatus" SubElementID="IsilonSNMP.Monitor.PhysicalFanStatus_PhysicalFanWarn">
<Name>PhysicalFanWarn</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.PhysicalFanStatus" SubElementID="IsilonSNMP.Monitor.PhysicalFanStatus_PhysicalFanCritical">
<Name>PhysicalFanCritical</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.PhysicalFanStatus_AlertMessageResourceID">
<Name>Isilon PhysicalFan Status</Name>
<Description>The Fan ({0}) is in a warning or error state. Current Fan speed is: {1}.</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Class.IsilonCluster.PhysicalFan">
<Name>Isilon Fan</Name>
<Description>Fan</Description>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Class.IsilonCluster.PhysicalFan" SubElementID="Index">
<Name>Index</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Relationship.NodesHostsPhysicalFan">
<Name>Isilon Cluster Hosts PhysicalFan</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Discovery.PhysicalFan">
<Name>Discover Isilon Cluster Physical Fans</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.DataSource.DiscoverPhysicalFan">
<Name>Discover Isilon Cluster PhysicalFan</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.ClusterPhysicalFanAvailabilityDependency">
<Name>Isilon Fan</Name>
</DisplayString>
<DisplayString ElementID="IsilonSNMP.Monitor.ClusterClusterAvailabilityDependency">
<Name>Cluster</Name>
</DisplayString>
</DisplayStrings>
</LanguagePack>
</LanguagePacks> -
Enterprise monitoring using JMX
Hello,
So, my company has a lot of J2EE/Tomcat servers running on java 1.6. I'm trying to find a way to monitor them all via JMX from a centralized system, which would be accessible to multiple users (web based, ideally).
Based on my understanding of JMX, it should be possible to extract the data we need from each JVM. I have been using JConsole to do this on an ad-hoc basis when we have problems with a particular JVM and it's great.
But I can't seem to find any good software for doing enterprise-wide monitoring and long-term data collection... can anyone suggest a good package, either free/open-source (ideally) or commercial?
Basically, I want to be able to:
* collect CPU, memory, DB (hibernate), HTTP request stats, etc. via JMX and archive it
* view graphs of the above
* ideally, we could also receive email alerts if certain conditions were met, e.g. memory almost full.
As a side note:
We're already using Zenoss (http://www.zenoss.com) to monitor the OS-level stuff and we really like it, but we need more visibility into each JVM (we have multiple JVMs per physical server). As far as I can tell, Zenoss doesn't support JMX monitoring... but has anyone found a way to make this work? If so, I'd love to hear about it, since this would be ideal for me.You may want to have a look at Glassbox, an open source troubleshooting agent for pinpointing problems in Enterprise Java applications.
http://www.glassbox.com
It offers both JMX and web-based access to the collected data but I'm not sure the web-based console allows you to present the collected data graphically. But still you could write your own JConsole plugins and display the collected
data coming from Glassbox and your own custom MBeans in a graphical way but of course JConsole is Swing-based.
Have a look at the JavaOne 2007 Hands-On Lab 1420 to get more detailed info about using Glassbox/JMX/JConsole together.
http://blogs.sun.com/lmalventosa/entry/j1_07_hol_1420
Regards,
Luis-Miguel Alventosa
Java SE JMX/JConsole development team
Sun Microsystems, Inc.
http://blogs.sun.com/lmalventosa/
Maybe you are looking for
-
Accrual engine: manual accrual, accrual method
Hello My client has following specific requirement for making an accrual. There is vendor invoice for payment of advance of rental of the building for 300 eur for 3 months of rent. posting 1st of month: entry of rent invoice: rent cost 300 eur agains
-
MACPRO: Is there an interface that uses DIGITAL AUDIO IN?
I just got my new MacPro (woohoo!) and was getting ready to replace my 'ol tube preamp-to-soundcard configuration with a FW input box... when I realized I only have ONE of each FW port! I already have my USBs overpopulated, and my FW800 daisy-chainin
-
Dear all I have activated the web-dms using SICF, then went to bc-bsp and activated "cvaw_entire" I have added the required entries in c:\windows\system32 after clicking u201CTest servicesu201D I could able to login to web-dms but not able to create
-
Problems installing 9.2.0 on aix 5L
Hi.. I´m getting several "make" errors on the linking phase of the installation of oracle 9.2.0.1 The messages looks like this: Error invoking target install of makefile /opt/oracle/product/9.0.1/plsql/lib/ins_plsql.mk and others calling different mk
-
SRM 7.01 and ECC6.0 EhP5 Hi experts, on srm- POWL application many buttons dont work. Im able to see Purchase orders etc., but when i select a PO, the buttons(e.g.: "edit", "change", "disyplay" ) are clickable, but no action follows. A javascript.vo