Batch Classification Data Report

Hi Experts,
I want to create a report that displays the contents of the batch classification data (characteristics) in each batch. Can I do this via ABAP query? May I know which tables contain this data? Thanks!
Regards,
Marvin

Hello
First way:
1. With material number and batch number goto table MCH1 and get CUOBJ_BM.
2. Goto table AUSP with OBJEK = MCH1-CUOBJ_BM and KLART = '023' (or '022')
You will get characteristics (AUSP-ATWRT, AUSP-ATFLV)
Other way: use bapi BAPI_OBJCL_GETDETAIL for this. (examples of use you may find yourself in SDN)

Similar Messages

  • Updating Batch classification data from MIGO for Purchase order

    Hi,
    I need to update batch classification data (in MSC3n) from MIGO for purchase order. The logic needed for this is as below,
    1) Pass material and batch to MCH1 table to get CUOBJ_BM.
    2) Pass CUOBJ_BM to INOB table to get INOB-OBJEK.
    3) Pass INOB-OBJEK to CLAF_CLASSIFICATION_OF_OBJECTS to get class name & characteristic name.
    4) Pass INOB-OBJEK, CLASS name and characteristic name to BAPI_OBJCL_CHANGE to update batch classification data.
    I created implicit enhancement at the bottom of FM "CLVF_VB_INSERT_CLASSIFICATION". But the problem is, the return parameter of BAPI_OBJCL_CHANGE is giving the following error.
    Class type 023, object type MCH1, object RAW-6             0000001151
    Object is currently locked by user
    The assignment was not changed
    Please let me know how to do it. Is there any BADI or User Exit?

    Hi,
    As you said the break point is not triggering did you activate your exit and activated even the project to which your exit is assigned.
    I hope you missed activating your project in CMOD transaction. Please verify it once and if it is not activated then immediately activate it and try debugging again.
    Regards,
    Rafi

  • Basics for Batch Classification Data

    Hello Experts ,
    I have few queries for Batch Classification Data .
    1. Which are the tables where Batch Classification Data for the batches is stored .
    2.Which Function module is called once we do the Goods movement which determines the batch
    classification data .
    3.When we do stock transfer for batches , then the Batch classification will run in Issuing plant and
    the batch classi. data will be copied in the receiving plant . Can you please tell me that which object
    carries this data from issuing plant to receiving plant.
    4.There is also a user exit with which we can play with Batch classification , can you please give some information on this .
    Thank you very much for the help !
    Regards
    Shashank

    1. The table is AUSP - but why would you need to know that. There are good function modules to query, read, change classifications of batches - so why would you like to read directly from DB?
    2. This depends on your release. Typicall in MIGO the module VB_CREATE_BATCH is called, the same one that is called within the BAPI to create batches.
    3. See 2. When you create a batch with reference, you call the same module additionally with the key of the reference batch (this is the issueing batch). 
    Inside that module are loads of user exits for all kind of purposes.
    Why not have a look yourself in Customizing at Logistics General -> Batch Management -> Batch Valuation.
    There's the "customer exits for goods movements in inventory management" (this is called e.g. in the goodsmovement bapi and the old transactions)  --> EXIT_SAPMM07M_004
    and the  "Valuation of Creation of New Batches Using Function Module" (this is called in the MSCxN and in MIGO) --> EXIT_SAPLV01Z_014 .
    In Customizing there's also the documentation what you can achieve with the exits.
    Hope this helps.
    Stefan

  • Batch classification "Date of last goods receipt" is "00.00.0000"

    Dear all,
    I have configured all steps for batch determination for FIFO.
    It worked fine for IM (stock transfer - mov.type 301) on last friday, however, get the issue today:
    - After I do GR (mov.type 101), the batch is auto created, batch classification is created,
    I use MSC2N to view batch classification:
    the value of "Date of last goods receipt" is "00.00.0000"
    What is wrong with my configuration?
    Could you pls help me to fix this?
    Thanl you very much for you help!
    Edited by: Ngo Quoc Hung on Dec 13, 2010 10:59 AM

    System Updates Batch Data in the Batch Master Record in the Following ways :
    1)  If the batch does not yet exist for the plant, it is automatically created.
    2)  If the batch already exists for the plant, the new quantity is simply posted as a receipt in the specified storage location.
    When posting a goods receipt with reference to Purchase order, the system updates Posting date as the goods receipt date in general data of the batch.

  • Batch Classification data not getting updated during the GR of the PO

    Dear Gurus,
    While doing the GR of the Purchase order the classification data for the batch should get updated .However we can see those data in MSC2N (Change batch) but not in MSC3N (Display Batch) .While consultuing with SAP we found that the data in MSC3N is directly picked in the AUSP table but the data in MSC2 N  reads the information directly from the
    reference table field (MCH1-LWEDT & MCH1-LIFNR .My Qusetion is why this the AUSP entries are not getting updated during the GR itself.
    Sumit Mohan

    Hi Sumit,
    I am not sure about your question, but if you want to populate the classification data during goods receipt then you need to maintain characteristics values in material master for classification tab under class type batch i.e. 022. After then it will apper during goods receipt for characteristics value for batch.
    Regards,
    Bhagat

  • Batch Classification data(charateristic) updation

    Hi All,
         I need to update certain classification data of a batch. I know the class of the bacth and the charateristic name. What I don`t know is the FM to do it. Can you please help me here. And also if there is some sample code then that would be great.
    Thanks
    Anuj

    Hi Anuj,
                 I am creating batch using BAPI_BATCH_CREATE. While creating batch i need to maintain Classification characteristics as well...how to maintain this classification data...in FM docu it is saying..
    You use this method to
    Change a batch master record
    Create classification of a batch in the background (object characteristics only)
    What does it mean and how can I pass the classification characteristics in background...plz help me.

  • Batch Classification for Finished Goods

    Hi,
    Can anybody explain me the significance of maintaining batch classification data for a finished material?
    Currently we have batch management active for all the finished materials but for some materials we have not maintained the classification data.
    When I checked the batch data in MMBE it shows me the Production date & Shelf life expiration date based on the values maintained in the material master.
    The class type is maintained at the plant level as 022 with characteristics as Last Goods Receipt & Shelf Life Expiration date.
    I want to know what impact will be on the distribution of these materials if I do not maintain the classification data?
    Thanks & Regards,
    Abhijit

    Hi Ravi & Lakshman,
    Thanks a lot for the response. I understand what batch classification is & how it is implemented to use in coordination with Batch Determination. What I would like to know is what if the batch search strategy & class type (022) is defined at the plant level and  batch management for a finished material is active but classification data is not maintained. GR (101) for this finished material is possible but does this mean that not having classification data will not have any impact on the goods movement of this material?
    In case of production when the classification data is not maintained for a back flushed material (raw / semifinish), after the process order confirmation the 261 movements end up in COGI with reason Enter Batch. Since the selection criteria fails due to the unavailability of classification data; the batch needs to be selected manually instead of the system picking up the correct batch automatically.
    Like in inventory (consumption of raw & semifinish) do we have batch determination & search strategy for distribution where the finished stock will be picked up for the sales orders based on the selection criteria & sorting rule?
    Thanks & regards,
    Abhijit
    Edited by: Abhijeet K. Nerurkar on Feb 14, 2011 2:18 AM

  • Report with Classification Data & Batch

    Hi,
    We have created a Material, say 10001, with Classification View with the following details:
    Class Type: 023     
    Class: PAPER_BATCH
    Characteristic: 1. Paper Bulk, 2. Paper Brightness
    While doing Goods Receipt for the Material 10001, we have entered the values 10 & 15 for Characteristic Paper Bulk & Paper Brightness respectively and Batch 082010.
    Now I want a report where in I can view the following all the above data like Material, Batch, and the Values of the Characteristic entering during the Goods Receipt
    What all are the reports related with Class & Batch?
    Please guide.
    Regards,
    PK

    Hi,
    There is No Standard SAP report
    Check this link
    Re: Table for Material Classification data
    check the above link for the table
    Using the table you can write Z reports
    Regards
    G.Ganesh Kumar

  • Report of all materials with tax classif data under a certain plant

    Hi All,
    I need a report which will show the list of all materials and their tax classification data .(
    under a certain plant ).
    Preethi.

    Hi,
    You create the Query in SQVI by joining the tables --MARC, MVKE,MLAN.
    So include the selection fields with Plant, Sales organization, Dist channel, Country, etc..
    Out put fields you can include as per your requirements from all these tables .
    rgds
    gsc

  • Report for Inventory batch creation date

    Hi experts,
    Is there a report in SAP that shows inventory batch creation date?  We want the actual creation date NOT when the batch was input into SAP. For example, we went live on 4/1/2010 with SAP but there are inventory batch created prior to that date.  We want the creation date NOT the 4/1/2010 of data conversion date.
    Regards
    Rajneesh Gulati

    Hi Rajneesh,
    Check these tables which are relevant for batch management.
    MCHA
    MCH1
    MCHB
    Regards
    Ram

  • Batch data transfer from batch classification to inspection lot.

    Hi Gurus,
    My client requirement is that the results he enters in batch classification should get transfer to inspection lot in QM.The results in batch classification will be maintained by prod. person.
    These results should be visible in QM lot and Q.M person should be able change these results and these changed results should get reflected in Batch classification.
    for eg.
    Production person will enter width in batch classification. for eg 1200mm.This value should be visible to QM person in QM lot and it should be modifiable and if modified by QM person(for eg 1300 mm) , the changed value should be updated in batch classification.
    Is this scenario possible in std. SAP and if possible pls. provide the information as early as possible.
    thanks in advance.

    My guess is your having a production person perform an in-process test themseleves or entering in a vendor provided value for the characteristic.
    Why not just set up a separate operation in the inspection plan for the production person?  Set up a workcenter for the operation and do security at that level so the production person can only record against his/her workcenter.
    Create a second operation for the lab with there own workcenter.  Make the characteristic required for the production operation and optional on the lab operation.
    Allow the lab access to both workcenters.
    The lab can now review any data enterred by production, and if necessary, record a new value in there own operation. 
    The UD copies the last recorded result to the batch, (std SAP).
    Craig

  • Reading classification data of batchs from archiv files (MM75)

    Hi,
    At performance of archiving and deleted batch (object MM_SPSTOCK in SARA, Release 4.7), which have classification assignments (class type 022) there was a following situation: all batches in run with same material, have in index table for selection from archiv same offset, and at review of data of classification in transaction MM75 batch classification, charact values of classification are collected in one general list from all values batches on the same material in run. Besides, at viewing of a key of object of party on the screen classification in transaction MM75 (MATNR, WERKS, CHARG) it is visible incomplete batch number (3 signs from 10) only. Please support as to solve the given problem - it is required to have possibility of reading from  archiv file data for separate required batch, and in this case in archive the information has mixed up for all batches with an same material.
    Pls help.

    open a message at sap

  • Reporting On Classification Data Out Of Material Master Inquiry (MM03)

    I have a question for anyone who can help.  Getting classification data out of SAP table is not straight foreward as most other data in MM03.  Has anyone ever extracted classification data ??  If so, how  ??
    Thank-You
    Jeff

    hello there,
    were you able to obtain any information on your query? I have a similar requirement and I'd be grateful if you could help.
    Thanks,
    Yusuf

  • Batch Classification Values not getting changed

    Hi Gurus,
    I am using the following bapi ( BAPI_OBJCL_CHANGE ) to change Batch classification values Eg: Cut clarity etc.
    when i pass these values thru the function module in the program it is not getting changed while when i change it through msc2n it gets changed successfully...
    I have passed the following values in the parameters of the bapi :
    OBJECTKEY            = v_objectkey          
    OBJECTTABLE        = 'MCH1'          
    CLASSNUM             = V_CLASSNUM 
    CLASSTYPE           = '023'
    KEYDATE                = 30.04.2010
    ALLOCVALUESCHARNEW
    CHARACT = CLARITY
    VALUE_CHAR =  P040
    VALUE_NEW   = P040.
    Can some one help me solve this....
    Needed urgently..
    Edited by: NAVIN FERNANDES on Apr 30, 2010 12:31 PM
    Edited by: NAVIN FERNANDES on Apr 30, 2010 12:32 PM

    Hi Jacky,
    I am posting the code here.. Do let me know if u have ne queries:
    REPORT  ZNAVBATCH.
    SELECTION-SCREEN BEGIN OF BLOCK B1.
    PARAMETERS: P_MATNR TYPE MATNR,
                P_CHARG TYPE CHARG_D,
                P_WERKS TYPE WERKS_D,
                P_LGORT TYPE LGORT_D.
    SELECTION-SCREEN END OF BLOCK B1.
    START-OF-SELECTION.
      DATA: WA_BATCH TYPE BAPI1003_OBJECT_KEYS,
            WA_ALLOCCHAR TYPE BAPI1003_ALLOC_VALUES_CHAR,
            WA_ALLOCVAL TYPE BAPI1003_ALLOC_VALUES_NUM,
            INT_BATCH TYPE STANDARD TABLE OF BAPI1003_OBJECT_KEYS,
            INT_RET1 TYPE STANDARD TABLE OF BAPIRET2,
            INT_RET2 TYPE STANDARD TABLE OF BAPIRET2,
            INT_RET3 TYPE STANDARD TABLE OF BAPIRET2,
            LV_KEY TYPE BAPI1003_KEY-OBJECT,
            INT_ALLOCVAL TYPE STANDARD TABLE OF BAPI1003_ALLOC_VALUES_NUM,
            INT_ALLOCCHAR TYPE STANDARD TABLE OF BAPI1003_ALLOC_VALUES_CHAR,
            INT_ALLOCCURR TYPE STANDARD TABLE OF BAPI1003_ALLOC_VALUES_CURR.
      WA_BATCH-KEY_FIELD = 'MATNR'.
      WA_BATCH-VALUE_INT = P_MATNR.
      APPEND WA_BATCH TO INT_BATCH.
      WA_BATCH-KEY_FIELD = 'CHARG'.
      WA_BATCH-VALUE_INT = P_CHARG.
      APPEND WA_BATCH TO INT_BATCH.
      CALL FUNCTION 'BAPI_OBJCL_CONCATENATEKEY'
        EXPORTING
          OBJECTTABLE    = 'MCH1'
        IMPORTING
          OBJECTKEY_CONC = LV_KEY
        TABLES
          OBJECTKEYTABLE = INT_BATCH
          RETURN         = INT_RET1.
      IF SY-SUBRC = 0.
       WRITE: 'SUCCESSFUL'.
        CALL FUNCTION 'BAPI_OBJCL_GETDETAIL'
          EXPORTING
            OBJECTKEY              = LV_KEY
            OBJECTTABLE            = 'MCH1'
            CLASSNUM               = 'ZTBATCHCHR'
            CLASSTYPE              = '023'
            KEYDATE                = SY-DATUM
          UNVALUATED_CHARS       = ' '
          LANGUAGE               = SY-LANGU
        IMPORTING
          STATUS                 =
          STANDARDCLASS          =
          TABLES
            ALLOCVALUESNUM         = INT_ALLOCVAL
            ALLOCVALUESCHAR        = INT_ALLOCCHAR
            ALLOCVALUESCURR        = INT_ALLOCCURR
            RETURN                 = INT_RET2
        IF SY-SUBRC = 0.
          WRITE : 'SUCCESSFUL'.
          READ TABLE INT_ALLOCCHAR INTO WA_ALLOCCHAR WITH KEY CHARACT = 'CLARITY'.
          IF SY-SUBRC = 0.
            WA_ALLOCCHAR-VALUE_CHAR = 'C02'.
            WA_ALLOCCHAR-VALUE_NEUTRAL = 'C02'.
            MODIFY INT_ALLOCCHAR FROM WA_ALLOCCHAR INDEX SY-TABIX TRANSPORTING VALUE_CHAR VALUE_NEUTRAL.
          ENDIF.
          CALL FUNCTION 'BAPI_OBJCL_CHANGE'
            EXPORTING
              OBJECTKEY                = LV_KEY
              OBJECTTABLE              = 'MCH1'
              CLASSNUM                 = 'ZTBATCHCHR'
              CLASSTYPE                = '023'
             STATUS                   = '1'
             STANDARDCLASS            =
             CHANGENUMBER             =
             KEYDATE                  = SY-DATUM
             NO_DEFAULT_VALUES        = ' '
           IMPORTING
             CLASSIF_STATUS           =
            TABLES
              ALLOCVALUESNUMNEW        = INT_ALLOCVAL
              ALLOCVALUESCHARNEW       = INT_ALLOCCHAR
              ALLOCVALUESCURRNEW       = INT_ALLOCCURR
              RETURN                   = INT_RET3
          IF SY-SUBRC = 0.
            CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
             EXPORTING
               WAIT          = 'X'
            IMPORTING
              RETURN        =
            IF SY-SUBRC = 0.
              WRITE: 'SUCCESSFUL'.
            ENDIF.
          ENDIF.
        ENDIF.
    ENDIF.

  • Batch Number Transaction Report

    Dear Experts,
    Is it possible to modify the form settings of Batches table in Batch Number Transaction Report as I need to add in some user-defined fields into it?
    Below is the layout of my Batches table in the report:
    Batches
    #   Item No   Item Description   Batch   WhsCode   Qty   Status   Manufacturing Date
    and I would like to add in Width, Length & Height columns in the table.
    I can't preset the value of length, width & height of the item in Item Master Data because different batches of same item will have different length, width & height. So I created these fields (Width, Length, Height) in Goods Issue & Goods Receipt and assigned different values there. After that, I need to do some references at Batch Number Transaction Report to find out which batches got the specified measurement of that item.
    Thanks in advance.

    Hi Sachin. I think you have misunderstood what I mentioned before.
    I want the report to show like this
    Item No.   Item Description              Batch   WhsCode   Qty   Direction   Status        T     W        L
    A893S     Pine 14 x 125 x 1030mm          A123    WH01       100   In        Released   14   125    1030
    A893S     Pine 14 x 125 x 1030mm          A123    WH01       -10  Out       Released     14   125    1030
    A126B     Ash 14 x 125 x 1090mm          J123     WH01        50   In         Released   14   125    1090
    In fact, below is the result table that I get
    Item No.   Item Description                Batch   WhsCode   Qty   Direction   Status        T     W        L
    A893S     Pine 14 x 125 x 1030mm            A123    WH01       100   In           Released   14   125    1030
    A126B     Ash 14 x 125 x 1090mm            J123     WH01        50   In            Released   14   125    1090
    using this query
    SELECT T0.[ItemCode], T0.[ItemName], T0.[BatchNum], T0.[WhsCode], T0.[Quantity],
    case when T0.[Direction]=0 then 'In' when T0.[Direction]=1 then 'Out' end Direction,
    Case when T1.[Status]=0 then 'Released' end Status, T2.[U_Height], T2.[U_Width], T2.[U_Length]
    FROM IBT1 T0 
    INNER JOIN OIBT T1 ON T0.BatchNum = T1.Batchnum and T0.Itemcode=T1.ItemCode
    INNER JOIN IGN1 T2 ON T1.ItemCode = T2.ItemCode and T0.Quantity = T2.Quantity
    WHERE T1.[ItemCode] =[%0]
    Thanks,
    Xavier

Maybe you are looking for