Reading classification data of batchs from archiv files (MM75)

Hi,
At performance of archiving and deleted batch (object MM_SPSTOCK in SARA, Release 4.7), which have classification assignments (class type 022) there was a following situation: all batches in run with same material, have in index table for selection from archiv same offset, and at review of data of classification in transaction MM75 batch classification, charact values of classification are collected in one general list from all values batches on the same material in run. Besides, at viewing of a key of object of party on the screen classification in transaction MM75 (MATNR, WERKS, CHARG) it is visible incomplete batch number (3 signs from 10) only. Please support as to solve the given problem - it is required to have possibility of reading from archiv file data for separate required batch, and in this case in archive the information has mixed up for all batches with an same material.
Pls help.

open a message at sap

Similar Messages

How can i retrieved data into the infocube from archived files

hi,
i have archived cube data and i have to load data into the cube from archived files.
so now i want to find archived files and how to load data into the cube.
thanks

Hi.....
Reloading archived data should be an exception rather than the general case, since data should be
archived only if it is not needed in the database anymore. When the archived data target is serving also as a
datamart to populate other data targets, Its recommend that you load the data to a copy of the original
(archived) data target, and combine the two resulting data targets with a MultiProvider.
In order to reload the data to a data target, you have to use the export DataSource of the archived data
target. Therefore, you create an update rule based on the respective InfoSource (technical name 8<data
target name>). You then trigger the upload either by using Update ODS data in data target or by
replicating the DataSources of the MYSELF source system and subsequently scheduling an InfoPackage
for the respective InfoSource
If you want to read the data for reporting or
control purposes, you have to write a report, which reads data from the archive files sequentially.
Alternatively, you can also use the Archiving Information System (AS). This tool enables you to define an
InfoStructure, and create reports based on these InfoStructures. The InfoStructures define an index for
the archive file data. At the moment, the archiving process in the BW system does not fill the
InfoStructures during the archiving session automatically. This has to be performed manually when
needed.
Another way of displaying data from the archive file is by using the Extractor checker (TCODE RSA3).
Enter the name of the export DataSource of the respective data target (name of the data target preceded
by 8), and choose the archive files that are to be read. The extractor checker reads the selected archive
files sequentially. Selection conditions can be entered for filtering but have to be entered in in internal
format
It will remain same in the change log table.
Check this link :
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b32837f2-0c01-0010-68a3-c45f8443f01d
Hope this helps you...........
Regards,
Debjani............

Unable to get Field Names from Archived File

Hi All,
We have a ECC 6 Ehp4 system. When i retrieve Idocs archived using SARA, the data only contains application data. There is no field names available - eg: posting date, tax code etc. Please find below the background on this issue.
I configured archiving of process idocs (status 52,12,03) from EDIDC tables. I set up the settings for Archive Object IDOC and archived the data for 15 days.
Both archiving and deletion of data from the table was successful.
I tried reading the Idoc data from Archive File using the Information System option -> Info structure (available as default for Idoc).
But the data retrieved only shows the Application data for all the segments of the IDoc. The fields for the segments like Tax Code, Posting Date etc are not available in the data. Functional teams will not be able to make sense with just the application data.
Am I missing some setting? Is there any way to retrieve the related field values also ?
Please help.
Thanks and Regards,
Raghavan

Hi All,
There is tcode WE10. You could choose if the data source is archive and also the archive session. You will get the list of segments provided. click on the segment number and you will get the data.
Thanks and Regards,
Raghavan

How to load date and time from text file to oracle table through sqlloader

hi friends
i need you to show me what i miss to load date and time from text file to oracle table through sqlloader
this is my data in this path (c:\external\my_data.txt)
7369,SMITH,17-NOV-81,09:14:04,CLERK,20
7499,ALLEN,01-MAY-81,17:06:08,SALESMAN,30
7521,WARD,09-JUN-81,17:06:30,SALESMAN,30
7566,JONES,02-APR-81,09:24:10,MANAGER,20
7654,MARTIN,28-SEP-81,17:24:10,SALESMAN,30my table in database emp2
create table emp2 (empno number,
                  ename varchar2(20),
                  hiredate date,
                  etime date,
                  ejob varchar2(20),
                  deptno number);the control file code in this path (c:\external\ctrl.ctl)
load data
infile 'C:\external\my_data.txt'
into table emp2
fields terminated by ','
(empno, ename, hiredate, etime, ejob, deptno)this is the error :
C:\>sqlldr scott/tiger control=C:\external\ctrl.ctl
SQL*Loader: Release 10.2.0.1.0 - Production on Mon May 31 09:45:10 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Commit point reached - logical record count 5
C:\>any help i greatly appreciated
thanks
Edited by: user10947262 on May 31, 2010 9:47 AM

load data
infile 'C:\external\my_data.txt'
into table emp2
fields terminated by ','
(empno, ename, hiredate, etime, ejob, deptno)Try
load data
infile 'C:\external\my_data.txt'
into table emp2
fields terminated by ','
(empno, ename, hiredate, etime "to_date(:etime,'hh24:mi:ss')", ejob, deptno)
this is the error :
C:\>sqlldr scott/tiger control=C:\external\ctrl.ctl
SQL*Loader: Release 10.2.0.1.0 - Production on Mon May 31 09:45:10 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Commit point reached - logical record count 5
C:\>
That's not an error, you can see errors within log and bad files.

Gif - file help: i don't want to read the gif each time from the file.....

Hello there guys,
i'm making a game and therefor i need to read a gif file like 20 times.
i don't want my program to read the gif each time from the file, but only once.
so i load it into an image or something?
cuz opening the gif 20 times from my hard disk is a lot of time loss....
opening it once and store it is much more efficient
thx in advance
plz help me out, cuz i don't really know how to do it.
(in Delphi it's easy, but Java......)
greetz,
SpeciesXX
Ramon Ribbe

yes, it works, i used this code, thx man
void button1_ActionPerformed(java.awt.event.ActionEvent event)
          ImageIcon image = new ImageIcon("f:/a.gif");
          JLabel label = new JLabel();
          label.setIcon(image);
          this.getContentPane().add(label);
          label.setBounds(10,10,100,100);
and there i see my image :-)
but 1 more thing, should i display all those blocks (images) on an applet, or should i use something else? (like what??)
a sort of frame?
because later on i have the field where all the blocks are in, and i have an area surrounding it, displaying all kinda information about the game, like how many lives remaining....
can i put 2 applets in eachother? like applet1 is the parent of applet2?
or should i use something else?
plz help me, cuz java is kinda new to me i see....
in delphi i just used 2 forms, form 1 with the blocks, form2 with the rest of info, and also being the parent of form1
thx again, soon i can help ya guys too, i hope..
(im learning java at school, but way too slow and to ez)
Ramon

Error 105, Could not read full block (2048 bytes) from checkpoint file ~/dirchk/sdfsdj.cpe

Hi expert,
i am getting below error in goldengate due to mount point full and i released the space and still the same error for all gg processes. i can see the *cpe cpr file become 0 bytes. so i deleted and re added the extract and repliacat and while adding the replcat i used add replicat checkpoint table because of that multiple entries of same replicat came in checkpoint table . my checkpoint details also present in ./GLOBALS. now my doubt is if add replicate with mentioning checkpoint table name will duplicate entry will be created or what is the work around for this.
MANAGER RUNNING
Invalid checkpoint for EXTRACT qqqq (error 105, Could not read full block (2048 bytes) from checkpoint file XXXXXXXXX)
Invalid checkpoint for EXTRACT qqq(error 105, Could not read full block (2048 bytes) from checkpoint file XXXXXXXXXX)
Invalid checkpoint for REPLICAT qqq (error 105, Could not read full block (2048 bytes) from checkpoint file XXXXXXXXXXX)

Hi Kariyath
Increase the page size of your windows machine.Check for the recommanded page size.Remember that the recommanded page size should be the lower limit.If you have any issue feel free to ask.Your prob will be solved
Award suitable points

Reload Idoc from archive file

Hi,
I know the program RSEXARCL which will reload the idoc from archive file.
If there is any SAP program to reload the particular outbound idoc from archive file by giving idoc number in the selection screen?
After reloading to database ,we need to send this idoc to external system .
Kindly help.
Thanks,
Anil

Hi,
Please check the below link:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/17c435df-0901-0010-72a7-b9dcd271213d?QuickLink=index&overridelayout=true&5003637692468
Regards,
Rajesh

Does LabView program behave differently under Traditional Chinese version from regular English version. The program reads in numbers and characters from input files.

Does LabView program behave differently under Traditional Chinese version from regular English version. The program reads in numbers and characters from input files.

Hope this helps,
Ankita

Error while uploading data to ztable from excel file

Hi,
I have a requirement where i have to upload data from excel file to ztable.I have used the fm 'ALSM_EXCEL_TO_INTERNAL_TABLE' for reading the excel file.After reading the excel file i have used INSERT zrb_hdr from table t_zrb_hdr for updating the ztable with data .
here it is giving error as the data base table zrb_hdr and the internal table t_zrb_hdr should be declared of same type .
I got this error b'coz i have changed the date and time fields in t_zrb_hdr table to char type.so the structure of zrb_hdr and t_zrb_hdr are not same.If i don't change the date and time fields,in the o/p i am not getting proper date and time formats.
now how can i upload data into ztable?

Hi,
Try this.
Data: itab type standard table of ztable,
         wa_itab type ztable.
loop at t_zrb_hdr into wa_t_zrb_hdr.
   wa_itab-date = wa_t_zrb_hdr-date.
   wa_itab-time = wa_t_zrb_hdr-time.
   like move all the fiedl to wa_itab...........
   append itab with wa_itab.
Endloop.
now insert the records from itab to the database table ztable.
Thanks,
Muthu.

How do I restore addresses from archive file or time machine without iCloud overriding?

I recently had an issue with my address book contacts. About 90% of the contacts disappeared, then synched through iCloud to my iphone and ipad.....so nearly all my contacts were lost on all devices. I have both time machine and an address book archive file.
When I tried restoring from time machine, the iCloud synching saw it as an older version of the file and went to the deleted contacts version....i.e. I was right back where I started.
When I tried importing from the address book archive, the same thing happened.....iCloud saw the imported version as an older copy of the contacts file and deleted out everything I had just imported.
The only way I was able to get the contacts back was to go to time machine (with address book application open), select all the contacts, copy them, cancel out of time machine, and then paste the contacts into the current version of address book.....I guess the system sees that as a "new" version of the contact and doesn't overrite it. Problem is that it doesn't carry over all the different groups that way, and I have to move addresses into the groups all over again....kinda time consuming.
Any ideas on how to import from archive or restore from time machine (the normal way) without iCloud synching overriding the "older" and desired version of the file? Address book doesn't have any option to "override current contacts with imported ones".....
Thanks.

Try this:
Turn off your internet connection completely: check it's really off.
Import your backup into Address Book.
Select all your contacts.
From the File menu choose Export>vCard and save the file somewhere convenient.
Now turn the internet connection back on. Your contacts will disappear from Address Book again.
From the File menu choose 'Import' and select the file you exported to.
Hopefully this contacts list will stay in place: wait until it's synced to iCloud and check that it's on the website and syncs to your Phone.

Read a non english word from text file

While Reading thai charater from text file which was sent by QAD(a different application),
We are reading 60 char using substr() function.
If the data is English word it reads correctly with 60 char.
But if it is in thai characters it returns more than 60 char.
In oracle all NLS Char set has been already set.
Can anyone help in this issue
thanks in advance

Maybe you should use SUBSTRC, SUBSTR2 or SUBSTR4 depending on the character set of your database. See http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96540/functions119a.htm#87068
Message was edited by:
Pierre Forstmann

Reading and writing to and from a file to a form

Hi there
I would like somebody to send me a code example,
showing me how to reading records from a file to a form,
and writing records to the same file from the same form.
I know that I have to use sycronize, but I just have not been
successful. I can constract forms, go from form to a form,
do buttons, do text fields. I can even read and write from and
to files. However I cannot do is write from a file to a form and
from a form to a file.
could somebody please explain how this done, and could you
please give me a code example. All the books seem to either
deal with forms or with files. None seem to combine both.
I am sure it is very ease to do if ONLY I knew how!!!
thank you very much in advance for you help.

I understand that code and I have used it before, however thanks for
trying to help me, it is really appreciated. However, that is not my
problem. I can read and write from a file to the console and vice versa.
what I cannot do, no matter how hard I try, is to write from a file, and
output it in.
I will tell you how far I have got.
I have a MenuFrame class, this is the code for it:
package WorkflowApp;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.io.*;
public class MenuFrame extends JFrame {
JMenuBar menuBar1 = new JMenuBar();
JMenu menuFile = new JMenu();
JMenuItem menuFileExit = new JMenuItem();
JMenu menuHelp = new JMenu();
JMenuItem menuHelpAbout = new JMenuItem();
JToolBar toolBar = new JToolBar();
JButton jButton1 = new JButton();
JButton jButton2 = new JButton();
JButton jButton3 = new JButton();
ImageIcon image1;
ImageIcon image2;
ImageIcon image3;
JLabel statusBar = new JLabel();
Button button2 = new Button();
Button button3 = new Button();
Button button4 = new Button();
Button button5 = new Button();
Button button6 = new Button();
Button button7 = new Button();
Button button1 = new Button();
//Construct the frame
public MenuFrame() {
enableEvents(AWTEvent.WINDOW_EVENT_MASK);
try {
jbInit();
catch(Exception e) {
e.printStackTrace();
//Component initialization
private void jbInit() throws Exception {
image1 = new ImageIcon(WorkflowApp.MenuFrame.class.getResource("openFile.gif"));
image2 = new ImageIcon(WorkflowApp.MenuFrame.class.getResource("closeFile.gif"));
image3 = new ImageIcon(WorkflowApp.MenuFrame.class.getResource("help.gif"));
this.getContentPane().setLayout(null);
this.setSize(new Dimension(400, 492));
this.setTitle("MenuFrame");
statusBar.setText(" ");
statusBar.setBounds(new Rectangle(0, 0, 3, 17));
menuFile.setText("File");
menuFileExit.setText("Exit");
menuFileExit.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
fileExit_actionPerformed(e);
menuHelp.setText("Help");
menuHelpAbout.setText("About");
menuHelpAbout.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
helpAbout_actionPerformed(e);
jButton1.setIcon(image1);
jButton1.setToolTipText("Open File");
jButton2.setIcon(image2);
jButton2.setToolTipText("Close File");
jButton3.setIcon(image3);
jButton3.setToolTipText("Help");
toolBar.setBorder(null);
toolBar.setBounds(new Rectangle(2, 2, 389, 30));
button2.setBounds(new Rectangle(217, 62, 135, 44));
button2.setLabel("Staff Details");
button2.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(ActionEvent e) {
button2_actionPerformed(e);
button3.setBounds(new Rectangle(26, 127, 135, 44));
button3.setLabel("Arange Viewing");
button3.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(ActionEvent e) {
button3_actionPerformed(e);
button4.setBounds(new Rectangle(218, 127, 136, 41));
button4.setLabel("Valuation");
button4.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(ActionEvent e) {
button4_actionPerformed(e);
button5.setBounds(new Rectangle(28, 196, 135, 41));
button5.setLabel("Schedule");
button6.setBounds(new Rectangle(221, 194, 133, 40));
button6.setName("button6");
button6.setLabel("Register Interest");
button7.setBounds(new Rectangle(31, 266, 133, 42));
button7.setLabel("Register Offers");
button1.setBounds(new Rectangle(27, 62, 131, 42));
button1.setLabel("New Client");
button1.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(ActionEvent e) {
button1_actionPerformed(e);
menuFile.add(menuFileExit);
menuHelp.add(menuHelpAbout);
menuBar1.add(menuFile);
menuBar1.add(menuHelp);
this.setJMenuBar(menuBar1);
this.getContentPane().add(statusBar, null);
this.getContentPane().add(toolBar, null);
toolBar.add(jButton1);
toolBar.add(jButton2, null);
toolBar.add(jButton3, null);
this.getContentPane().add(button3, null);
this.getContentPane().add(button5, null);
this.getContentPane().add(button7, null);
this.getContentPane().add(button2, null);
this.getContentPane().add(button4, null);
this.getContentPane().add(button6, null);
this.getContentPane().add(button1, null);
//File | Exit action performed
public void fileExit_actionPerformed(ActionEvent e) {
System.exit(0);
//Help | About action performed
public void helpAbout_actionPerformed(ActionEvent e) {
MenuFrame_AboutBox dlg = new MenuFrame_AboutBox(this);
Dimension dlgSize = dlg.getPreferredSize();
Dimension frmSize = getSize();
Point loc = getLocation();
dlg.setLocation((frmSize.width - dlgSize.width) / 2 + loc.x, (frmSize.height - dlgSize.height) / 2 + loc.y);
dlg.setModal(true);
dlg.show();
//Overridden so we can exit on System Close
protected void processWindowEvent(WindowEvent e) {
super.processWindowEvent(e);
if(e.getID() == WindowEvent.WINDOW_CLOSING) {
fileExit_actionPerformed(null);
void button2_actionPerformed(ActionEvent e) {
StaffDetails myFrame = new StaffDetails();
myFrame.show();
void button3_actionPerformed(ActionEvent e) {
ArrangeViewing myFrame = new ArrangeViewing();
myFrame.show();
void button1_actionPerformed(ActionEvent e) {
NewClientFrame myFrame = new NewClientFrame();
myFrame.show();
// System.exit(1);
void button4_actionPerformed(ActionEvent e) {
Valuation myFrame = new Valuation();
myFrame.show();
then I have a new form class, this is the code for it
package WorkflowApp;
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class NewClientFrame extends JFrame {
Label label1 = new Label();
Label label2 = new Label();
Label label3 = new Label();
Label label4 = new Label();
Label label5 = new Label();
Label label6 = new Label();
Label label7 = new Label();
Label label8 = new Label();
Label label9 = new Label();
Label label10 = new Label();
TextField textField1 = new TextField();
TextField textField2 = new TextField();
TextField textField3 = new TextField();
TextField textField4 = new TextField();
TextField textField5 = new TextField();
TextField textField6 = new TextField();
TextField textField7 = new TextField();
TextField textField8 = new TextField();
TextField textField9 = new TextField();
TextField textField10 = new TextField();
Button button1 = new Button();
Button button2 = new Button();
//Construct the frame
public NewClientFrame() {
enableEvents(AWTEvent.WINDOW_EVENT_MASK);
try {
jbInit();
catch(Exception e) {
e.printStackTrace();
//Component initialization
private void jbInit() throws Exception {
this.getContentPane().setLayout(null);
this.setSize(new Dimension(411, 488));
this.setTitle("NewClientFrame ");
this.addWindowListener(new java.awt.event.WindowAdapter() {
public void windowClosing(WindowEvent e) {
this_windowClosing(e);
label1.setBounds(new Rectangle(21, 23, 110, 23));
label1.setAlignment(2);
label1.setText("Assign Number");
label2.setBounds(new Rectangle(23, 57, 108, 25));
label2.setAlignment(2);
label2.setText("Name");
label3.setBounds(new Rectangle(40, 91, 94, 24));
label3.setAlignment(2);
label3.setText("Address 1");
label4.setBounds(new Rectangle(21, 124, 112, 29));
label4.setAlignment(2);
label4.setText("Address 2");
label5.setBounds(new Rectangle(20, 159, 116, 29));
label5.setAlignment(2);
label5.setText("PoscCode");
label6.setBounds(new Rectangle(18, 197, 119, 26));
label6.setAlignment(2);
label6.setText("Telephone");
label7.setBounds(new Rectangle(25, 228, 112, 26));
label7.setAlignment(2);
label7.setText("Other Telephone");
label8.setBounds(new Rectangle(12, 261, 125, 24));
label8.setAlignment(2);
label8.setText("Email Address");
label9.setBounds(new Rectangle(6, 301, 138, 25));
label9.setAlignment(2);
label9.setText("Staff Assigned (Name)");
label10.setBounds(new Rectangle(22, 341, 124, 23));
label10.setAlignment(2);
label10.setText("Staff Assigned (No.)");
textField1.setBounds(new Rectangle(155, 19, 80, 26));
textField2.setBounds(new Rectangle(155, 58, 193, 24));
textField3.setBounds(new Rectangle(156, 90, 192, 25));
textField4.setBounds(new Rectangle(157, 126, 192, 23));
textField5.setBounds(new Rectangle(157, 159, 195, 25));
textField6.setBounds(new Rectangle(157, 194, 195, 26));
textField7.setBounds(new Rectangle(157, 230, 192, 24));
textField8.setBounds(new Rectangle(157, 263, 193, 25));
textField9.setBounds(new Rectangle(157, 303, 196, 24));
textField10.setBounds(new Rectangle(158, 337, 95, 24));
button1.setBounds(new Rectangle(23, 398, 144, 34));
button1.setLabel("Staff Available");
button2.setBounds(new Rectangle(211, 396, 148, 34));
button2.setLabel("Submit Record");
button2.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(ActionEvent e) {
button2_actionPerformed(e);
this.getContentPane().add(label1, null);
this.getContentPane().add(label2, null);
this.getContentPane().add(label3, null);
this.getContentPane().add(label4, null);
this.getContentPane().add(label5, null);
this.getContentPane().add(label6, null);
this.getContentPane().add(label7, null);
this.getContentPane().add(label8, null);
this.getContentPane().add(label9, null);
this.getContentPane().add(label10, null);
this.getContentPane().add(textField1, null);
this.getContentPane().add(textField2, null);
this.getContentPane().add(textField3, null);
this.getContentPane().add(textField4, null);
this.getContentPane().add(textField5, null);
this.getContentPane().add(textField6, null);
this.getContentPane().add(textField7, null);
this.getContentPane().add(textField8, null);
this.getContentPane().add(textField9, null);
this.getContentPane().add(textField10, null);
this.getContentPane().add(button1, null);
this.getContentPane().add(button2, null);
public void fileExit_actionPerformed(ActionEvent e) {
System.exit(0);
// exit(this);
// close();
//Overridden so we can exit on System Close
protected void processWindowEvent(WindowEvent e) {
super.processWindowEvent(e);
if(e.getID() == WindowEvent.WINDOW_CLOSING) {
System.exit(0);
void button2_actionPerformed(ActionEvent e) {
// myFrame.close();
this.dispose();
void this_windowClosing(WindowEvent e) {
this.dispose();
I also have an about box, staff details, and valuation forms.
what I am trying to do is for the New client form to be able to read and write from and to a file, and display the info.
I am working in JBuilder3, a bit out of date I know, but it is the best I can do. Any Ideas how to do this.

Bulk Data - Insert / Update from text file - Urgent

hi,
Consider there is a Table A. There are around 1.7 Million
Records.
i have a situation that i will be getting the Data,
Every two Weeks, around 100 - 200 thousand Records.
I have to do some calculations.
If any Old Data Exists, then update the Data
for the Non - Primary Key Fields.
Else
I have to Insert the New Data.
Most of the time, i will be getting update information.
very few hundreds, insert records.
Please, help me, by providing the techniques or tools.
Is it posssible to automate the whole process.
Sreedhar V
null

Sreedhar V (guest) wrote:
: hi,
: Consider there is a Table A. There are around 1.7 Million
: Records.
: i have a situation that i will be getting the Data,
: Every two Weeks, around 100 - 200 thousand Records.
: I have to do some calculations.
: If any Old Data Exists, then update the Data
: for the Non - Primary Key Fields.
: Else
: I have to Insert the New Data.
: Most of the time, i will be getting update information.
: very few hundreds, insert records.
: Please, help me, by providing the techniques or tools.
: Is it posssible to automate the whole process.
: Sreedhar V
Here's a process that might help:
create a temporary table the same format as the flat file.
create a sqlldr control file to load the data from the file into
the temp table
create a pl\sql or JAVA script to cursor through the records
from the temp table and for each row see if there is a match on
TABLE A. If so this is an update, if not it is an insert.
If you are in a Unix environment you can write a shell script to
automate the whole process and schedule it in kron.
null

Read at each new line from .txt file

Hi guys
I want to read from a file which I am saving using labview. What I am doing is reading 128 bytes fro VISA port and saving it in .txt file with new line constant. At some later time I want to read 128 bytes from that text file do some processing and display it. The "read from text file" vi has convert EOL but I am not able to configure it. Please help me..
Thanks in advance
Niladri

Hi Newbee_3,
Do 1 thing, Read the txt file & convert this into string, Then you have all the flexibility to do whatever you want.
Thanks
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet

Reading Classification data for material

Hi all
can anybody give me a FM or BAPI to read the classification data
for a particular material..
Kindly help . apt points will be rewarded
Regards
N manjrekar

Hi Nikhil
just copy paste this code to get the clasification of any material.
hope this will be helpful.
DATA: V_CLASS LIKE KLAH-CLASS VALUE 'MAT_SEL_CLASS_JASC',
        V_CLASSTYPE LIKE KLAH-KLART VALUE '023',
        V1_OBJECT LIKE AUSP-OBJEK,(nothing but material no)
        V_OBJECTTABLE LIKE TCLA-OBTAB VALUE 'MARA',
        V_LANGU LIKE SY-LANGU,
        V_DATUM LIKE SY-DATUM.
        V_LANGU = 'EN'.
        V_DATUM = SY-DATUM.
CALL FUNCTION 'CLAF_CLASSIFICATION_OF_OBJECTS'
EXPORTING
   CLASS                      = V_CLASS
CLASSTEXT                  = 'X'
    CLASSTYPE                  = V_CLASSTYPE
CLINT                      = 0
FEATURES                   = 'X'
   LANGUAGE                   = V_LANGU
   OBJECT                     = V1_OBJECT
   OBJECTTABLE                = V_OBJECTTABLE
   KEY_DATE                   = V_DATUM
INITIAL_CHARACT            = 'X'
NO_VALUE_DESCRIPT          =
CHANGE_SERVICE_CLF         = 'X'
INHERITED_CHAR             = ' '
CHANGE_NUMBER              = ' '
TABLES
    T_CLASS                    = T_CLASS
    T_OBJECTDATA               = T_CLOBJDAT
I_SEL_CHARACTERISTIC       =
T_NO_AUTH_CHARACT          =
EXCEPTIONS
   NO_CLASSIFICATION          = 1
   NO_CLASSTYPES              = 2
   INVALID_CLASS_TYPE         = 3
   OTHERS                     = 4 .
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
     READ TABLE T_CLOBJDAT INDEX 2. " KEY 'MAT_CHAR_THICKNESS'.
      IF SY-SUBRC = 0.
        T_OUTPUT1-THICK = T_CLOBJDAT-AUSP1.
      ENDIF.
Please close the thread if your query in answered
Reward points if helpful.
Regards
Zarina

Reading classification data of batchs from archiv files (MM75)

Similar Messages

Maybe you are looking for