Batch Derivation - No sender found during both Manual deriv & Order release

Folks,
I'm trying to simulate the batch derivation functionality but couldn't get it work. I have used both manual and release production order derivation events.
Necessary configuration is setup including batch where used list and related derivation configuration.
I have setup the condition records as follows (it is based on pull derivation; 1 receiver and n sender)
For sender condition, I have condition record based on receiving + sending material combination, in which I defined two sending materials (both HALB) along with the receiving material (FERT). VFDAT (SLED) is my field attribute.
For recipient condition, I have condition record based on material number, which is the same FERT material. VFDAT (SLED) is my field attribute and standard rules have been maintained.
Both HALB materials have batches with VFDAT (SLED) dates.
For manual derivation, I created a batch for the FERT without any VFDAT data in it and I'm trying to run DVMAN transaction for this FERT batch to invoke derivation, but it errors with two messages "No sender found for attribute VFDAT" & "The system did not find any sending batches".
I tried using a production order release as well, but it's the same problem.
Any thoughts as to why it is not working??
Thanks!!

Figured it out. I forgot to assign batches before invoking batch derivation.

Similar Messages

Batch Derivation - No sender found during manual derivation & order release

Folks,
I'm trying to simulate the batch derivation functionality but couldn't get it work. I have used both manual and release production order derivation events.
Necessary configuration is setup including batch where used list and related derivation configuration.
I have setup the condition records as follows (it is based on pull derivation; 1 receiver and n sender)
For sender condition, I have condition record based on receiving + sending material combination, in which I defined two sending materials (both HALB) along with the receiving material (FERT). VFDAT (SLED) is my field attribute.
For recipient condition, I have condition record based on material number, which is the same FERT material. VFDAT (SLED) is my field attribute and standard rules have been maintained.
Both HALB materials have batches with VFDAT (SLED) dates.
For manual derivation, I created a batch for the FERT without any VFDAT data in it and I'm trying to run DVMAN transaction for this FERT batch to invoke derivation, but it errors with two messages "No sender found for attribute VFDAT" & "The system did not find any sending batches".
I tried using a production order release as well, but it's the same problem.
Any thoughts as to why it is not working??
Thanks!!

Figured it out. I forgot to assign batches before invoking batch derivation.

Batch number coming automatically at the time of Process order release

Hi All,
I want the system generated batch number for header material to come automatically at the time of process order release.
At present ,the batch number is entered manualy dering process order creation.
Can anyone pls guide abt the settings required for the same

Dear,
Define the production scheduling profile CORY then
Auto Batch Creation = 2 On release.
Then assign this to your FG or SFG materials in work scheduling view in material msater MM02. Then create new order and check.
Now for automatic generation i have to set internal number asignment for batches.
Batch will create for movement type say 101 SPROLogistics - GeneralBatch mangment--Creation of New Batches --Define Batch Creation for Goods Movements. so it will have same logic in MM for 101 GR against PO will be internal number range but no effect in SD.
Regards,
R.Brahmankar
Edited by: R Brahmankar on Mar 12, 2010 12:40 PM

How to enable Order release to rejected status when batch derivation fails during release

Hi,
I need to enable production order release to rejected status when batch derivation fails during order release.
one way is to have Batch entry required for the sender material in the material master, with this standard SAP will reject the release.
Below is the scenario:
sender attribute for derivation - VFDAT from batch of the sender material
sender material - Batch Entry not required in material master
All required master data set for derivation.
during order release, since batch entry is not required, system carries out the derivation without sender batch and derivation fails. Order still gets released.
I am looking for advise on how to restrict release in above situation.
appreciate your help.
Thanks
Aheesh

Aheesh, Order release for instance is based on what we see as events/system statuses which are allowed/forbidden etc., for a particular action to happen/be triggered.
If you can figure out if there exists a status related to batch derivation, it may give some further leads.

Problems found during the EXPORT to specified keyin table.

Hi
I am getting this error in sending iDOC system( We have iDOC-XI-iDOC Scenario.) I tried to reregister the queues but still nothing is passing thru XI.
Thanks,
Manish

Acutally I am getting this DUMP in ST22.
ShrtText |
Problems found during the EXPORT to specified key in table.
What happened?
Error in ABAP application program.
The current ABAP program "CL_XMS_PERSIST================CP" had to be
terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
The table " " does not contain any data records with the specified key.
The system called the internal SAP database interface because it
expected to find such a key.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"EXPORT_TABLE_UPDATE_CONFLICT" C
"CL_XMS_PERSIST================CP" or "CL_XMS_PERSIST================CM00W"
"INSERT_MSG_ALL"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
Information on where terminated
The termination occurred in the ABAP program "CL_XMS_PERSIST================CP"
in "INSERT_MSG_ALL".
The main program was "SAPMSSY1 ".
The termination occurred in line 302 of the source code of the (Include)
program "CL_XMS_PERSIST================CM00W"
of the source code of program "CL_XMS_PERSIST================CM00W" (when
calling the editor 3020).
Source Code Extract
Line
SourceCde
272
IF lv_switch_mode = 2.
273
IF export_to_db_optimized = co_true.
274
CALL FUNCTION 'SXMB_EXPORT_TO_DB'
275
EXPORTING
276
iv_kind = 'P'
277
it_prop = lt_prop
278
iv_switch_mode = lv_switch_mode
279
iv_msgguid = clustkey-msgguid
280
iv_pid = clustkey-pid
281
iv_vers = clustkey-vers.
282
ELSE.
283
EXPORT lt_prop FROM lt_prop
284
TO DATABASE sxmsclup2(is) FROM wa_clup ID clustkey.
285
ENDIF.
286
ELSE.
287
IF export_to_db_optimized = co_true.
288
CALL FUNCTION 'SXMB_EXPORT_TO_DB'
289
EXPORTING
290
iv_kind = 'P'
291
it_prop = lt_prop
292
iv_switch_mode = lv_switch_mode
293
iv_msgguid = clustkey-msgguid
294
iv_pid = clustkey-pid
295
iv_vers = clustkey-vers.
296
ELSE.
297
EXPORT lt_prop FROM lt_prop
298
TO DATABASE sxmsclup(is) FROM wa_clup ID clustkey.
299
ENDIF.
300
ENDIF.
301
>>>>>
IF sy-subrc <> 0. "#EC *
303
 m_syserr_raise 'PERSIST' 'MSGGUID_EXISTING'
304
 clustkey-msgguid clustkey-pid
305
 clustkey-vers ''.
306
lv_p1 = clustkey-msgguid.
307
lv_p2 = clustkey-pid.
308
lv_p3 = clustkey-vers.
309
310
RAISE EXCEPTION TYPE cx_xms_syserr_persist
311
EXPORTING id = cx_xms_syserr_persist=>co_id_msgvers_existing
312
p1 = lv_p1
313
p2 = lv_p2
314
p3 = lv_p3.
315
316
ENDIF.
317
318
319
320
table SXMSPRES (resources)
321
table SXMSPXRES (X-resources)
Internal notes
The termination occurred in the function "expOutDb" of the SAP
Basis System, specifically in line 3748 of the module
"//bas/640_REL/src/krn/runt/abexpo.c#8".
The internal operation just processed is "cmpr".
The internal session was started at 20060724051049.
Internal call code.........: " "
Key..................: " "
It is very likely that a constellation similar to the following applies:
Process 1: Process 2:
UPDATE x. ==> NOT_FOUND
UPDATE x. ==> NOT_FOUND
INSERT x. ==> ok
INSERT x. ==> DUPLICATE KEY
DELETE x. ==> ok
UPDATE x. ==> NOT FOUND
+ DUMP
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
[0] DoStack2 ( 0x105a4f7c0, 0x0, 0x2d1b000, 0x100000000, 0x1, 0x0 ), at 0x100471a60
[1] CTrcStack2 ( 0x105a4f7c0, 0x0, 0x100000000, 0x2d1ac00, 0x2, 0x102d1ada4 ), at 0x100471610
[2] __1cQrabax_CStackSave6F_v_ ( 0x10303b400, 0x303b400, 0x103874d10, 0x101fcfce8, 0x100000000, 0x
[3] ab_rabax ( 0x1, 0x2d1ac00, 0x0, 0x100000000, 0x3873800, 0x100000000 ), at 0x100a7fa04
[4] __1cIexpOutDb6FppCpLLInJEXPO_MODE__i_ ( 0x2, 0xe82, 0xffffffffffffffff, 0x101f97a90, 0x2, 0x38
[5] __1cTwrite_data_compress6FkpnICONNE_WR_C_i_ ( 0xffffffff7fffb038, 0x1070, 0x1000, 0x10095fa9c,
[6] __1cMab_connwrite6FIIpHIpFp0pIppnHAB_DATA_ppv_ipFppCpLLInJEXPO_MODE__i_i_ ( 0x0, 0x4, 0x10302a
[7] __1cLexpo_export6F_v_ ( 0x0, 0x960000, 0x95f800, 0x0, 0x103847980, 0x1 ), at 0x10095aa20
[8] __1cIab_jexpo6F_v_ ( 0x0, 0x5b52800, 0xd0, 0x100000000, 0x1, 0x0 ), at 0x100952df4
[9] __1cIab_extri6F_i_ ( 0x100000000, 0x5a37800, 0x2f0, 0x1, 0x0, 0x5e ), at 0x10068ccf8

BPM Message is incomplete. No Sender found

Hi,
i am not strong in using BPM, i have searched related to this error on sdn, but still not find.
bpm step
receive1, receive2 in fork in block, out of block transformation and then send step.
receiver determination
BSFILE01 -> BPM (no map)
BSFILE02 -> BPM (no map)
BPM -> BSFILE03 (map2)
i made two mapping in IR,
map1 : N -> 1.
BSFILE01 and BSFILE02 TO ABS(1)
map2 : ABS(1) TO BSFILE03
configuration time does not use map1,
bpm was received two receive in fork as well and then
my XI 3.0 sp info is SP15
error message on moni , but no error on PE, everything green.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">MESSAGE_INCOMPLETE</SAP:Code>
<SAP:P1>Sender</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message is incomplete. No Sender found</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
thanks
venjamin
Message was edited by: venjamin
Message was edited by: venjamin
Message was edited by: venjamin

Hi,
Are you trying to collect 2 different files into a single file or multiple same files into a single file?
If you are trying the former, which I think you are doing as you are using a fork with coreelation to collect the 2 files, you need to have a mapping step which will combine these 2 files into a single file ( N:1 ) mapping and , there is no need for a multiline container element as, both the files are of different message types.
Is this what you are tyring?
Regards,
Bhavesh

"Errors Found During Burning Process"

Hi,
Having sucessfully burned AVI movies using iDVD in the past I have started getting errors. iDVD now does the same thing regardless of the movie i'm trying to burn and the media I use.
Having selected Best Quality (due to the film size), the menu rendering works fine, as does the prolonged job of encoding the video. When iDVD gets to the Audi encoding bit, just before it starts to burn the DVD itself, iDVD ejects the disc and states: Errors Found During Burning Process.
Clicking on the arrow to get more info it states: "The recording device reported the hardware error: Tracking servo failure. (0x09, 0x01.)" Bizarrely, the main iDVD progress window states both 'Cleaning Up' and 'Writing Lead-In' and the only way to get out if it is to force quit.
I've read a few posts on here and tried a couple of things such as trashing the plist file and reparing permissions. I also booted up the diagnostic disc to see if it could see a problem with the optical drive. But nothing has solved the problem.
Any ideas?
For reference, I'm running iDVD 5.0.1 on Tiger on a 1.8 G5 iMac with 1GB RAM.
Appreciate any help you can give me.
Neil

Colleagues:
Ran into the same error, # -34506. Definitely frustrating as I was burning a DVD of an iMovie that I'd spent many hours editing. The iMovie is only 30 miniutes in length, so I don't think it's a size issue. iDVD went through each one of it's steps in burn DVD sequence. However, 45 minutes later when processing is finished, the message reads: "Burning Finished, Errors were found during the burning process." Clicked to see the detail: "The error # -34506 was reported." Checked the DVD and nothing was burned!!! The same thing happens when I opt for disk image. No img file is produced. This is especially frustrating as it looks like it all but completed processing.
Does anyone know what Error # -34506 specifically indicates? How do you fix this? Does it only happen in a specific sequence? And, is Apple aware of the problem?
Thanks!

Idvd5.01 Errors were found during the burning process (Burned Finished)

I've never had this problem before, but i'm trying to burn a dvd after all the media and dvd are ready for burning and when I click on the burn icon the following message pops up: Errors were found during the burning process. I've check to make sure nothing is hanging outside the title safe area. Any suggestion to why I'm getting this error.

Hello, Oscar,
This message can mean several things.
First, are you burning an iMovie or a slideshow or both?
Do you have chapter markers in your movie? Are they on or withing 2 seconds of any transition or at the beginning of your movie?
Does everything encode properly?
Are you able to 'save as disk image'?
Post back with some more details about your project.

Nokia X6 - Cannot send DTMF during a call

Hi all,
I just upgraded to an X6 and was wondering how to send a DTMF tone during a call (since there is no physical keypad).
Here is what I tried but to no avail :-
a) Dial number (O2 customer support : 202)
b) select Dialer and the keypad appears. Press "2" ... but nothing happens.
c) Close dialer. Press Options, select send DTMF, select Enter manually, select 2, select "tick", and still nothing.
d) select Dialer and the keypad appears. Press "2", press the "call symbol" on the keypad ... but nothing happens.
Anyone have any other ideas ?
Thanks.
Solved!
Go to Solution.

i think this was a issue for the first call ,until you rejected send dtmf i remember when i made 1st call i had to do the same when i got this phone
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

If two iPhones are linked to the same Apple ID can the other phone see the iMessages I'm sending, received or both?

If two iPhones are linked to the same Apple ID can the other phone see the iMessages I'm sending, received or both?

Yes, if both devices is using the same apple id for imessage.

Hey, does anybody know how can i have two different apple ids on my mac imessages, because i have two mobile phones with different ids and i would like to be able to send imessages from both accounts on my mac. Tnx

Hey does anybody know how to set up 2 apple ID on mac imessages? Because i have 2 different iphones and i would like to send imessages fron both accounts on my mac...

Associate your mobile numbers with your Apple ID, if you haven't already done so.
Sign out of iMessage on the Mac:
Messages ▹ Preferences ▹ Accounts ▹ Sign out
and on the iPhone:
Settings ▹ Messages ▹ Send & Receive ▹ Apple ID ▹ Sign out
Then, on the phone, tap
Use Your Apple ID for iMessage
Sign back into iMessage on both devices and test. If there's no change, you may have to wait for a change in network conditions.
Credit for this solution to ASC member SmittyLove and to Glenn Fleishman of tidbits.com.

HT4356 I have the up photos smart 5514 printer and can't get it hooked up to print web pages. It says no air printers found and both a connected to the same wifi

I have the up photos smart 5514 printer and can't get it hooked up to print web pages. It says no air printers found and both a connected to the same wifi

Shannmo-
The HP PhotoSmart 5514 is on Apple's list of AirPrint printers, so it should work. <iOS: AirPrint 101>
One problem might be that your WiFi router does not correctly handle Bonjour data required by AirPrint. Contact the router's manufacturer to see if there is a change to its setup or a firmware update that will solve the problem.
I had a printing problem several months ago, where the WiFi had jumped to a neighbor's WiFi that happened to have the same name. There are a LOT of WiFi routers out there named "Linksys"!
Fred

Message is incomplete. No Sender found ( in BPM )

Hi my scenario is as follows
BPM:
receive
Send
Transform
Synchronous Send
Transform
Send
I'm getting error in Synch Send as Message is incomplete. No Sender found
I checked receiver Determinations and Interface Determinations and everything looks fine. Also in SXMB_MONI no sender or receiver found for this Synchronous step. We are on PI7.0 so I dont think problem can be fixed with any patch.
Thanks in Advance

Hi Ram, Have a look at this forum thread,
you might get your problem's answer by this :
BPM Message is incomplete. No Sender found
thanks,
pooja

Error in File name or class name not found during Automation operation: 'CreateObject'

Hello Team,
When I am trying to execute the below code i am getting the following error. Any help would be greatly appreciated.
Set oFSO = CreateObject("Scripting.FileSystemObject")
If Not oFSO.FolderExists(SavePath) Then
Set f = oFSO.CreateFolder(SavePath)
Else
End If
53 4/11/2014 12:27:22 PM Error:
Error in <NoName(4).VBS> (Line: 9, Column: 1):
File name or class name not found during Automation operation: 'CreateObject'
I have googled through the error and tried to re-register the scrrun.dll using regsvr32 eventhogh it is successfully registered, i am getting the following error. My PC is windows 7 32bit OS.
any help is greatly appreciated.

The following script class will write a log file entry. See if it will run for you.
The script is using a class object that you might not have seen before. A little intro: The top section is just for testing the class. Normally I just comment this out after the class is working well. It should run right way. I would save the vbs file in the editor, That way when you are using autoactpath or currentscriptpath variables they will be able resolve the paths.
Paul
Attachments:
LoggingCode_V2.VBS ‏5 KB

Cannot Select Both "Manually manage music" and "Sync ringtones" for iTunes

iTunes won't let me sync when both "manually manage music and videos" and "sync ringtones" is checked. If I choose "manage music and videos" first, add my music, then check "sync ringtones" all my music that I sync'd is deleted. The only way it worked for me was to sync the ringtones first without any music in the iPhone then checking "manually manage music and videos" afterwards but the problem is that once the "manual manage music and videos" is checked the "sync ringtones" isn't checked anymore so if I decide to add a ringtone later on I have to check "sync ringtone" causing my music to be deleted from the iPhone. This is a bad glitch Apple please fix it!

If you manually manage music, to get ringtones on your phone, you have to drag them to the "actual iphone icon" in the device pane window, on the left side in itunes.
FYI:
Since the iphone DOES NOT support disk mode(like some ipods), there is no advantage to manually managing music, IMO.

Batch Derivation - No sender found during both Manual deriv & Order release

Similar Messages

Maybe you are looking for