Batch Design Capture of tables that include Object Types

When I attempt to use the Batch Design Capture facility to capture a table that includes an Object Type the facility dies without completing.
I am using Designer 9i / Oracle Design Editor v9.0.2.80.4.
The Batch Design Capture facility reports the following and then exits:
Repository connected successfully
Server Generator 9.0.2.80.4, Wed Jun 09 17:24:33 2004
Copyright (c) Oracle Corporation 1995, 2002. All rights reserved.
CDS-15334 Warning: The Oracle Object Type MESSAGEHEADER_TYPE already exists in the Repository. NOMERGE_AND_SAC Rule selected
=> the captured property values will not replace the existing property values in the repository but the Rules for the Secondary Elements (SACs) will apply for their own update
CDS-11305 Warning: Column 'E2B.MESSAGEHEADER' property DEFAULT VALUE exceeds maximum length (60) - Truncated
The table that I am trying to capture looks like this:
E2B
E2B_ID NOT NULL NUMBER
MESSAGEHEADER MESSAGEHEADER_TYPE
DATE_TRANSMITTED DATE
DATE_RECEIVED DATE
DATE_ACKNOWLEDGED DATE
... other columns ...
MESSAGE CLOB
and MESSAGEHEADER_TYPE looks like this:
MESSAGEHEADER_TYPE
MESSAGETYPE VARCHAR2(16)
MESSAGEFORMATVERSION VARCHAR2(3)
MESSAGEFORMATRELEASE VARCHAR2(3)
MESSAGENUMB VARCHAR2(100)
MESSAGESENDERIDENTIFIER VARCHAR2(60)
MESSAGERECEIVERIDENTIFIER VARCHAR2(60)
MESSAGEDATEFORMAT NUMBER(3)
MESSAGEDATE NUMBER(14)
Is is possible to use Designer to capture tables that include object types?

hi,
while running the package, use the activity "Maintain Table Reduction" in phase System Analysis to include / exclude / reduce the table from transfer.
Srila.

Similar Messages

Require help on Array of Nested tables and Oracle Object type

Hi All,
I have a scenario where I have some millions of records received from a flat file and the record is stored in Table as below:
Tablename: FILE_RECORD
Rows:
FILE_REG_ID = 1
RECORD_NBR = 1
PROCESSED_IND = U
RECORD= 00120130326006A
FILE_REG_ID = 1
RECORD_NBR = 2
PROCESSED_IND = U
RECORD= 00120130326003
1) I have to read these records at once and
a) Split the RECORD column to get various other data Eg: Fld1=001, Fld2=20130326, Fld3 = 003
b) send as an Array to Java.
2) Java will format this into XML and sent to other application.
3) The other application returns a response as Successful or Failure to Java in XML
4) Java will send RECORD_NBR and the corresponding response as Success or Failure back to PLSQL
5) PLSQL should match the RECORD_NBR and update the PROCESSED_IND = P.
I 'm able to achieve this using SQL Table type by creating a TYPE for Each of the fields (Flds) however the problem is Java cannot Access the parameters as the TYPE are of COLUMN Types
Eg: For RECORD_NBR
SUBTYPE t_record_nbr IS FILE_RECORD.T010_RECORD_NBR%TYPE;
Can you please let me know how I can achieve this to support Java, I know one way that is by creating an OBJECT TYPE and a TABLE of the OBJECT TYPE.
Eg: T_FILE_RECORD_REC IS OBJECT
FILE_REG_ID number(8), RECORD_NBR number (10), PROCESSED_IND varchar2(1), RECORD varchar(20)
Create type T_FILE_RECORD_TAB IS TABLE OF T_FILE_RECORD_REC
However I'm facing a problem to populate an Array of records, I know I'm missing something important. Hence please help.
It would be helpful to provide some guidelines and suggestions or Pseudo or a Code to achieve this. Rest all I can take up further.
Thanks in advance,

I know once way that is creating a OBJECT TYPE and a TABLE of OBJECT TYPE, howeve I feel I'm missing something to achieve this.You're right, you need SQL object types created at the database level. Java doesn't know about locally defined PL/SQL types
However you can do without all this by creating the XML directly in PL/SQL (steps 1+2) and passing the document to Java as XMLType or CLOB.
Are you processing the records one at a time?

Join table with an object type

Hi,
I would like ot know how to join a table with another table having an object type as a column value.
For ex:
Create type add_obj as object (st varchar2(10), city varchar2(10), zip varchar2(10));
Table A
Cust_id number
cust_address add_obj
Table B
Cust_id number
order_id number
I want to select the complete address for each order.
Is this the correct way to do this select:
Select o.order_id, c.customer_id, c.cust_address.st, c.cust_address.city, c.cust_address.zip
from table A c, table B o;
Any leads is appreciated. Thanks in advance.

>
unfortunately with a crashed Oracle db I could try nothing.... Forums are for getting help and offering help in times of need.
Will take your advice some other time. Now need help on how to select the address city, st and zip along with the order_id.
>
Ah - I understand - you mean before your class is over.
Unfortunately with a crashed Oracle db you will not know if our advice is correct or not since you won't be able to test it.
So I will offer advice some other time. Now need to get some fresh air and a hot cup of coffee.
Let us know when you DB is back up and you have run your tests. Then if you still have any questions other forum members may decide to help you. Well - if their database is up and running that is.

TYPE OR TABLE DEPENDENCY OF OBJECT TYPE (ORA-2303)

제품 : SQL*PLUS
작성날짜 : 2004-05-20
==================================================
TYPE OR TABLE DEPENDENCY OF OBJECT TYPE (ORA-2303)
==================================================
PURPOSE
Type이나 table의 dependency가 있는 type을 drop하거나 replace하고자
하면 ORA-02303 error가 난다. 이 error의 원인을 알아보도록 한다.
Explanation
Object의 attribute나 method를 수정하기 위해서는 object type을 drop하고 재생성
해야 한다. Type이나 table의 dependency가 있는 type을 drop하거나 replace하고자
하면 ORA-02303 error가 난다. Object type은 type (nested table 또는 VARRAY)
또는 object table로써 구체적으로 표현된다. 만약 data의 보존이 필요하다면
temporary table에 manual하게 옮겨놓아야 한다.
SQL Reference guide에 의하면 DROP TYPE FORCE 옵션은 recommend하지 않는다.
왜냐하면 이 옵션을 쓰게 되면 복구가 불가능하고 dependency가 있던 table들은
access하지 못하는 결과를 초래한다.
Example
아래의 query 1, 2, 3은 dependency을 확인하는 query문이다.
1. Find nested tables
select owner, parent_table_name, parent_table_column
from dba_nested_tables
where (table_type_owner, table_type_name) in
(select owner, type_name
from dba_coll_types
where elem_type_owner = '<typeOwner>'
and elem_type_name = '<typeName>');
2. Find VARRAYs
select owner, parent_table_name, parent_table_column
from dba_varrays
where (type_owner, type_name) in
(select owner, type_name
from dba_coll_types
where elem_type_owner = '<typeOwner>'
and elem_type_name = '<typeName');
3. Find object tables
select owner, table_name
from dba_object_tables
where table_type_owner = '<typeOwner>'
and table_type = '<typeName>'
and nested = 'NO';
Example ) Logon as Scott
/* Create an user defined object type */
SQL> create type object_type as object (
col1 number,
col2 varchar2(20))
Type created.
/* Create nested table type */
SQL> create type object_ntable as table of object_type
Type created.
/* Create varray type*/
SQL> create type object_varray as varray(5) of object_type
Type created.
/* Create parent table with nested table and varray */
SQL> create table master (
col1 number primary key,
col2_list object_ntable,
col3_list object_varray)
nested table col2_list store as master_col2
Table created.
/* Create object table */
SQL> create table object_table of object_type (col1 primary key)
object id primary key;
Table created.
ORA-2303 results if attempt to drop type with dependencies
SQL> drop type object_type;
drop type object_type
ERROR at line 1:
ORA-02303: cannot drop or replace a type with type or table dependents
위의 queery 1,2,3을 이용하여 object type dependency을 확인한다.
-- Find nested tables utilizing object type
SQL> select owner, parent_table_name, parent_table_column
from dba_nested_tables
where (table_type_owner, table_type_name) in
(select owner, type_name
from dba_coll_types
where elem_type_owner = 'SCOTT'
and elem_type_name = 'OBJECT_TYPE');
OWNER PARENT_TABLE_NAME PARENT_TABLE_COLUMN
SCOTT MASTER COL2_LIST
-- Find VARRAYs utilizing object type
SQL> select owner, parent_table_name, parent_table_column
from dba_varrays
where (type_owner, type_name) in
(select owner, type_name
from dba_coll_types
where elem_type_owner = 'SCOTT'
and elem_type_name = 'OBJECT_TYPE');
OWNER PARENT_TABLE_NAME PARENT_TABLE_COLUMN
SCOTT MASTER COL3_LIST
-- Find object tables
SQL> select owner, table_name
from dba_object_tables
where table_type_owner = 'SCOTT'
and table_type = 'OBJECT_TYPE'
and nested = 'NO';
OWNER TABLE_NAME
SCOTT OBJECT_TABLE
참고)
bulletin : 11576 처럼 utility을 이용하는 방법이 있다.
우리는 여기서 주의하여야 할 것은 script $ORACLE_HOME/rdbms/admin/utldtree.sql
을 내가 보고자 하는 user에서 돌려야 한다는 것이다.
$sqlplus scott/tiger
SQL> @$ORACLE_HOME/rdbms/admin/utldtree.sql
SQL> exec deptree_fill('TYPE','SCOTT','OBJECT_TYPE');
PL/SQL procedure successfully completed.
SQL> select * from ideptree;
DEPENDENCIES
TYPE SCOTT.OBJECT_TYPE
TYPE SCOTT.OBJECT_NTABLE
TABLE SCOTT.MASTER
TYPE SCOTT.OBJECT_VARRAY
TABLE SCOTT.MASTER
TABLE SCOTT.MASTER_COL2
TABLE SCOTT.OBJECT_TABLE
Reference Documents
Korean bulletin : 11576
<Note:69661.1>

Hi Carsten,
Thanks for the sharp hint. It works.
However, when I create a table using the schema, it gives me this error:
varray DOC."LISTOFASSIGNEDNUMBER"."ASSIGNEDNUMBER"
ERROR at line 14:
ORA-02337: not an object type column
Here is the script:
CREATE TABLE CUSTOMMANIFEST (
ID NUMBER PRIMARY KEY,
DOC sys.XMLTYPE
xmltype column doc
XMLSCHEMA "http://www.abc.com/cm.xsd"
element "CustomManifest"
varray DOC."LISTOFMANIFESTPORTINFO"."MANIFESTPORTINFO"
store as table MANIFESTPORTINFO_TABLE
(primary key (NESTED_TABLE_ID, ARRAY_INDEX))
organization index overflow
varray DOC."LISTOFASSIGNEDNUMBER"."ASSIGNEDNUMBER"
store as table ASSIGNEDNUMBER_TABLE
(primary key (NESTED_TABLE_ID, ARRAY_INDEX))
organization index overflow
LISTOFASSIGNEDNUMBER itself is complexType and not sure where is the error....
You may note there are more than two hierachy/levels...
Thanks.

Creating a fiscal date table that includes Day of Year and Week of Year column

Hi,
Our fiscal year runs between 1st October through to 30th September and I'm trying to create a date table that I can use to represent this in Powerpivot (I'm using Excel 2013). I had no probably creating columns for Fiscal month or fiscal year, however I am
having issue breaking it down more than that, specifically I cannot work out how to calculate:
- day of the year
- week of the year (with week one starting on the first day of the year rather than the first Monday)
I worked out how to do the day of the year until I had to try and account for leap years which broke the formula I had! Can anyone please recommend solutions, I cannot see anything online about this. Obviously I know that it is simple to do this for a normal
calendar year but this approach doesn't work with a custom fiscal year.
Whilst it is useful for several reasons, my main reason for wanting week is so that I can plot my Pivotcharts more smoothly (although I may have missed an easier way to do that).
Thanks,
James

For my example I started with 1 column in Power Pivot called [Date]
I created the following Columns
[DayofMonth] =Day([Date])
[MonthNumber] =Month([Date])
[Fiscal Year] =IF([MonthNumber]< 10, Year([Date]), (Year([Date])+1))
[Fiscal Day] =[Date] - DATE(([Fiscal Year] -1), 10,1) +1
[Fiscal Week] =RoundUp([Fiscal Day] / 7, 0)
Change [Date] to whatever your date column is and those DAX formulas will get you what you need

View of values in nested table attribute of object type

Hi,
I have:create or replace type ctx_line is object (
ctx_name varchar2(40),
ctx_value varchar2(1000)
create or replace type ctx_tab is table of ctx_line;
create type tp as object (
id      number,
ctx     ctx_tab
create table tt of tp nested table ctx store as ctx_nesttab;
create or replace view v as
SELECT VALUE(o).id as id
FROM tt o;Now I want to create an another view containing fields ctx_name, ctx_value and a key (maybe NESTED_TABLE_ID?) to the parent record in tt table. I must be able to join that view to each other. This is necessary because I will use that views in Forms 4.5 (which do not support nested tables).
Can someone help me, please?

I'm not sure what you are looking for exactly but is it something like this?
SELECT id
     , p.ctx_name
     , p.ctx_value
FROM   tt
     , TABLE(ctx) pWith the following test data:
INSERT INTO tt VALUES(1,CTX_TAB(CTX_LINE('A','SOME VALUE1')));
INSERT INTO tt VALUES(1,CTX_TAB(CTX_LINE('B','SOME VALUE2')));
INSERT INTO tt VALUES(1,CTX_TAB(CTX_LINE('B','SOME VALUE2')));this is the result:
SQL> SELECT id
2       , p.ctx_name
3       , p.ctx_value
4 FROM   tt
5       , TABLE(ctx) p
6 /
        ID CTX_NAME                                 CTX_VALUE
         1 A                                        SOME VALUE1
         1 B                                        SOME VALUE2
         1 B                                        SOME VALUE2

How to pass conventional table values in object types Dynamically

Hi All,
Need urgent help...
TYPE add_ty is object
(add1     varchar2(50),
add2     varchar2(50),
add2     varchar2(50))
type add_ty_obj is table of add_ty;
create table company_dtl
(cmpid          number(10),
cmpname          varchar2(100),
address          add_ty_obj);
table company_dtl contains demo data as below:-
cmpid cmpname address
C101     abc     UK,
          USA,
          AUS
c102     xyz     UK,
          CN,
          GER
If I want to read data from table and pass data to object add_ty_obj,
So How can I do it dynamically. I am willing to create procedure
which can read data from above table and pass that to mentioned object in
OUT parameter.
Out parameter contains same object type somewhere in middleware.
Please help or advice.
Thanks in Advance..

Hi
i have tried to make procedure that take company id as input and give their address as output.I think it might be useful for you. Or if you want something different
please write us with more detail.
CREATE OR REPLACE PROCEDURE READ_DATA_PROC( VAR_CMPID IN NUMBER , VAR_TYP OUT ADD_TY_OBJ)
AS
BEGIN
SELECT ADDRESS INTO VAR_TYP FROM COMPANY_DTL WHERE CMPID = V_CMPID ;
END READ_DATA_PROC;
here i'm also adding your table and type definition i've used
CREATE TYPE ADD_TY IS OBJECT
(ADD1 VARCHAR2(50),
ADD2 VARCHAR2(50),
ADD3 VARCHAR2(50));
CREATE TYPE ADD_TY_OBJ AS TABLE OF ADD_TY;
CREATE TABLE COMPANY_DTL
(CMPID NUMBER(10),
CMPNAME VARCHAR2(100),
ADDRESS ADD_TY_OBJ)
NESTED TABLE ADDRESS STORE AS ADDRESS_TAB;thanks,
Neeraj
Edited by: Neeraj.Ora on Feb 26, 2011 1:03 PM

Table that stores movement types and reversal movement type?

I want to take a movement type 561 and look that up in a table and find the reversing movement type in a program. is there a table that stores the movement type and reversing movement type

Hi
Table T156 has got movement type control and details. Where as other T156* tables stores other details directly or indirectly used b yMovement types
T156A
T156B
T156C
T156F
T156H
T156HT
T156K
T156M
T156N
T156Q
T156S
T156SC
T156SY
T156T
T156V
T156W
T156X
Regards
Virender Singh

Table that maintain address type corresponding to value in PA0006

Hi,
I am looking for a table that maintains different address type with description. Can anyone help me?
Sunny

Hi Sunny
The field in PA0006 is ANSSA which is for address type. But the back end table for values T591A.
If you create any record in PA0006 with the address type 05 mailing address, then you can view the same in pa0006 table under the field ANSSA.
But Here the Adress type is nothing but your subtype.
Regards
Suresh

Designer 10.1.2.02: failed using batch design capture

Hi,
running Oracle 10g on Solaris server release 9, and Designer on Windows XP SP1.
I tried to capture the current database model but it always failed with a windows error.
The report contains the following data:
AppName: dwzrun61.exe AppVer: 101.2.6.18 ModName: domdll61.dll
ModVer: 101.2.6.18 Offset: 00013b4a.
Do anybody knows the reason of such error ?
Do I need special patch to my service pack ?

Designer 10gR2 (10.1.2.0.2) is certified with Windows XP SP2. [Check metalink for complete certification information] Assuming that your installation is not corrupt and other Designer tools are working correctly, you could try installing SP2.
- Suresh

How do I update a Nested Table of inherited Object Types?

Does anyone know why the following line (commented out) doesn't work and what I can do? Is there some way to cast the column I am trying to update? I think I am going crazy....
create or replace type person_ot as object (name varchar2(10)) not final;
create or replace type student_ot under person_ot (s_num number) not final;
create type person_tt as table of person_ot;
declare
lv_person_list person_tt;
lv_sql varchar2(1000);
ref_cur sys_refcursor;
begin
lv_sql:= 'select new student_ot(''fred'', 100) from dual
union all
select new student_ot(''sally'', 200) from dual';
open ref_cur for lv_sql;
fetch ref_cur bulk collect into lv_person_list;
close ref_cur;
dbms_output.put_line(lv_person_list.count);
for i in lv_person_list.first..lv_person_list.last loop
lv_person_list(i).name := initcap(lv_person_list(i).name ); -- This works!
lv_person_list(i).s_num := 9999; Why doesn't this line work and how can I update the column s_num ??? :-(
end loop;
end;
/

Hi Tubby - You are right...It would make sense to create the Type as type of student_ot. Only problem is I am trying to keep it generic. I will include full listing to show what I am doing...
create or replace type person_ot as object (name varchar2(10)) not final;
create or replace type student_ot under person_ot (s_num number) not final;
create type person_tt as table of person_ot;
create table persons of person_ot;
declare
lv_person_list person_tt;
lv_sql varchar2(1000);
ref_cur sys_refcursor;
begin
lv_sql:= 'select new student_ot(''fred'', 100) from dual
union all
select new student_ot(''sally'', 200) from dual';
open ref_cur for lv_sql;
fetch ref_cur bulk collect into lv_person_list;
close ref_cur;
for i in lv_person_list.first..lv_person_list.last loop
lv_person_list(i).name := initcap(lv_person_list(i).name );
lv_person_list(i).s_num := 9999;* Why doesn't this line work?? :-(
end loop;
forall i in lv_person_list.first..lv_person_list.last
insert into persons values lv_person_list(i);
end;
/

How to handle the procedure that reutrn object types as out parameter

I have a procedure where it returns object(CREATE OR REPLACE TYPE xyz AS OBJECT) as a OUT parameter.
Now i have to pull the data from this type and need to send the data in excel.
Procedure will fetch data and assign it to object with lot of validations and local parameters variables..
How can i push the data from the out parameter and need to send that in excel..Its an oracle database 10g..

here's a basic example...
SQL> set serveroutput on;
SQL> create or replace type t_obj as object (x number, y number);
2 /
Type created.
SQL> ed
Wrote file afiedt.buf
1 create or replace package mypkg as
2    procedure testit(p_obj out t_obj);
3    procedure callme;
4* end;
5 /
Package created.
SQL> ed
Wrote file afiedt.buf
1 create or replace package body mypkg as
2    procedure testit(p_obj out t_obj) is
3    begin
4      p_obj := t_obj(1,2);
5    end;
6    procedure callme is
7      v_obj t_obj;
8    begin
9      testit(v_obj);
10      dbms_output.put_line('X='||v_obj.x||' Y='||v_obj.y);
11    end;
12* end;
SQL> /
Package body created.
SQL> exec mypkg.callme;
X=1 Y=2
PL/SQL procedure successfully completed.
SQL>

Okc/okx table that contains Transaction Type from the pricing/billing tab

We are running 11.5.9 EBS, and the module is Service Contracts Authoring.
I have a sql script that pulls data from the header and subline level for service contracts. If possible I would like to get the Transaction Type form the Pricing/Billing Tab. Summary > Pricing/Billing - submenu "Billing". I have not been able to find a table in OKC or OKX that contains this Transaction Type ID which can be tied back the cust_trx_type_id in the AR.RA_CUST_TRX_TYPES_ALL and in turn get the NAME for the transaction.

I'm not sure where the cust_trx_type_id would be stored in OKC/OKS tables, but the table OKS_BILL_TRANSACTIONS stores the trx_number that you can link to ra_customer_trx_all and get the cust_trx_type_id.
HTH
Alka

Problems on Object types

Hi
I faced some problems with O8(Release 8.0.5.0.0) object types.
Look at the following definition:
CREATE TYPE T_JMJX AS OBJECT( LBNO NUMBER(3),...);
CREATE TYPE LIST_JMJX AS TABLE of T_JMJX;
CREATE TABLE JXGC.JMJXJL
(JMJX LIST_JMJX,...)
NESTED TABLE JMJX STORE AS N_JMJXJL;
One day when I opened Schema Manager,I got a shock: TABLE JXGC.JMJXJL has four colunms with the same name !!
name schema datatype
JMJX none LIST_JMJX
JMJX none LIST_JMJX
JMJX none LIST_JMJX
JMJX JXGC LIST_JMJX
But in SQL*Plus I type 'decs JMJXJL',the column JMJX appears only once.
Other tables that has object type columns has the same problem.
This doesn't has any infection on my applications.
The real problem comes when one day I want to move the user JXGC to an other server.
Export was done successfully but has curious phenomenon:
Exporting NJMJXJL(the Nested Table)......19678 Exported
The number of rows Exported is about four times than the rows it should has.
When Imp80 goes to the tables that have object type columns ,I got the following errors:
Importing Table JMJXJL ........
IMP-00009: abnormal end of export file
Import terminated successfully with warnings.
Please help me to solve this problem.Thanks a lot!

Hi Alberto/Herald,
Thanks for your response.
p_serial_prod_in is a variable of table type srl_prd_type, and there are two elements in the table, serial number and product number.
My procedure has to handle all the serials and the products that it will receive as an input, (Both Forms and Java application will use this procedure)
I have used l_serial_num because after all the special characters are filtered i will use the value that i have captured in the l_serial_num.
I wish to put the validation in a loop for all the serials and products that i receive as an input. Please advise.
Thanks and Regards
Srinivas

Object Type Problem

Hi
I faced some problems with O8(Release 8.0.5.0.0) object types.
Look at the following definition:
CREATE TYPE T_JMJX AS OBJECT( LBNO NUMBER(3),...);
CREATE TYPE LIST_JMJX AS TABLE of T_JMJX;
CREATE TABLE JXGC.JMJXJL
(JMJX LIST_JMJX,...)
NESTED TABLE JMJX STORE AS N_JMJXJL;
One day when I opened Schema Manager,I got a shock: TABLE JXGC.JMJXJL
has four colunms with the same name !!
name     schema datatype
JMJX     none LIST_JMJX
JMJX     none LIST_JMJX
JMJX     none LIST_JMJX
JMJX     JXGC LIST_JMJX
And I query USER_TAB_COLUMNS, it do have 4 records.
But in SQL*Plus I type 'decs JMJXJL',the column JMJX appears only once.
Other tables that has object type columns face the same problem.
This doesn't has any infection on my applications.
The real problem comes when one day I want to move the user JXGC to an
other server.
Export was done successfully but has a curious phenomenon:
Exporting NJMJXJL(the Nested Table)......19678 Exported
The number of rows Exported is about four times than the rows it
should has.
When Impport goes to the tables that have object type columns ,I got
the following errors:
Importing Table JMJXJL ........
IMP-00009: abnormal end of export file
Import terminated successfully with warnings.
Please help me to solve this problem.Thanks a lot!

Stone,
You need to go to metalink.oracle.com to file an iTAR on this.
Regards,
Geoff
Hi
I faced some problems with O8(Release 8.0.5.0.0) object types.
Look at the following definition:
CREATE TYPE T_JMJX AS OBJECT( LBNO NUMBER(3),...);
CREATE TYPE LIST_JMJX AS TABLE of T_JMJX;
CREATE TABLE JXGC.JMJXJL
(JMJX LIST_JMJX,...)
NESTED TABLE JMJX STORE AS N_JMJXJL;
One day when I opened Schema Manager,I got a shock: TABLE JXGC.JMJXJL
has four colunms with the same name !!
name     schema datatype
JMJX     none LIST_JMJX
JMJX     none LIST_JMJX
JMJX     none LIST_JMJX
JMJX     JXGC LIST_JMJX
And I query USER_TAB_COLUMNS, it do have 4 records.
But in SQL*Plus I type 'decs JMJXJL',the column JMJX appears only once.
Other tables that has object type columns face the same problem.
This doesn't has any infection on my applications.
The real problem comes when one day I want to move the user JXGC to an
other server.
Export was done successfully but has a curious phenomenon:
Exporting NJMJXJL(the Nested Table)......19678 Exported
The number of rows Exported is about four times than the rows it
should has.
When Impport goes to the tables that have object type columns ,I got
the following errors:
Importing Table JMJXJL ........
IMP-00009: abnormal end of export file
Import terminated successfully with warnings.
Please help me to solve this problem.Thanks a lot!

Batch Design Capture of tables that include Object Types

Similar Messages

Maybe you are looking for