Table that maintain address type corresponding to value in PA0006

Hi,
I am looking for a table that maintains different address type with description. Can anyone help me?
Sunny

Hi Sunny
The field in PA0006 is ANSSA which is for address type. But the back end table for values T591A.
If you create any record in PA0006 with the address type 05 mailing address, then you can view the same in pa0006 table under the field ANSSA.
But Here the Adress type is nothing but your subtype.
Regards
Suresh

Similar Messages

Batch Design Capture of tables that include Object Types

When I attempt to use the Batch Design Capture facility to capture a table that includes an Object Type the facility dies without completing.
I am using Designer 9i / Oracle Design Editor v9.0.2.80.4.
The Batch Design Capture facility reports the following and then exits:
Repository connected successfully
Server Generator 9.0.2.80.4, Wed Jun 09 17:24:33 2004
Copyright (c) Oracle Corporation 1995, 2002. All rights reserved.
CDS-15334 Warning: The Oracle Object Type MESSAGEHEADER_TYPE already exists in the Repository. NOMERGE_AND_SAC Rule selected
=> the captured property values will not replace the existing property values in the repository but the Rules for the Secondary Elements (SACs) will apply for their own update
CDS-11305 Warning: Column 'E2B.MESSAGEHEADER' property DEFAULT VALUE exceeds maximum length (60) - Truncated
The table that I am trying to capture looks like this:
E2B
E2B_ID NOT NULL NUMBER
MESSAGEHEADER MESSAGEHEADER_TYPE
DATE_TRANSMITTED DATE
DATE_RECEIVED DATE
DATE_ACKNOWLEDGED DATE
... other columns ...
MESSAGE CLOB
and MESSAGEHEADER_TYPE looks like this:
MESSAGEHEADER_TYPE
MESSAGETYPE VARCHAR2(16)
MESSAGEFORMATVERSION VARCHAR2(3)
MESSAGEFORMATRELEASE VARCHAR2(3)
MESSAGENUMB VARCHAR2(100)
MESSAGESENDERIDENTIFIER VARCHAR2(60)
MESSAGERECEIVERIDENTIFIER VARCHAR2(60)
MESSAGEDATEFORMAT NUMBER(3)
MESSAGEDATE NUMBER(14)
Is is possible to use Designer to capture tables that include object types?

hi,
while running the package, use the activity "Maintain Table Reduction" in phase System Analysis to include / exclude / reduce the table from transfer.
Srila.

SAP has a table that maintains Stock on Hand for each day

SAP has a table that maintains Stock on Hand for each day
do u know which table is that
as i need to find data on stock on hand

HI Arunraj
if there is any specific time of the day that you want to extract the data, you can copy the data from the order series key figure (assuming that you want to extract the data from the order series keyfigure) to a time series key figure and extract the data from the time series key figure into a cube, etc.
I mention a specific time of the day because the stock situation is likely to change multiple times of the day due to stock movements on account of various reasons. Hence if you can establish a rule or a cut-off time of the stock situation, you can use the above route.
Hope this helps.
Thanks, Sandeep

Table that stores movement types and reversal movement type?

I want to take a movement type 561 and look that up in a table and find the reversing movement type in a program. is there a table that stores the movement type and reversing movement type

Hi
Table T156 has got movement type control and details. Where as other T156* tables stores other details directly or indirectly used b yMovement types
T156A
T156B
T156C
T156F
T156H
T156HT
T156K
T156M
T156N
T156Q
T156S
T156SC
T156SY
T156T
T156V
T156W
T156X
Regards
Virender Singh

Okc/okx table that contains Transaction Type from the pricing/billing tab

We are running 11.5.9 EBS, and the module is Service Contracts Authoring.
I have a sql script that pulls data from the header and subline level for service contracts. If possible I would like to get the Transaction Type form the Pricing/Billing Tab. Summary > Pricing/Billing - submenu "Billing". I have not been able to find a table in OKC or OKX that contains this Transaction Type ID which can be tied back the cust_trx_type_id in the AR.RA_CUST_TRX_TYPES_ALL and in turn get the NAME for the transaction.

I'm not sure where the cust_trx_type_id would be stored in OKC/OKS tables, but the table OKS_BILL_TRANSACTIONS stores the trx_number that you can link to ra_customer_trx_all and get the cust_trx_type_id.
HTH
Alka

Is there any function that output address by inputing the address no.?

Is there any function that accept an address number as input paramenter and return an address so that I don't need to build it myself?
Thanks!

FU ADDRESS_INTO_PRINTFORM        ADDRESS_TYPE
Text
Address type: 1,2,3 or ' '(default)
Description
There are three address types:
Address type '1': 'Normal' address (company or organization); the address structure used in most SAP applications as 'Address'.
Address type '2': Address of a person
Address type '3': Work address, usually the address of a contact person in a company
The default address type SPACE is treated as type '1' and is required for the upwards compatibility of the function module.
The interface parameters ADRSWA_IN and ADRSWA_OUT are only used in address type SPACE.
The other address types use:
ADDRESS_1 or ADDRESS_2 or ADDRESS_3 for the attributes, and
SENDER_COUNTRY, RECEIVER_LANGUAGE, NUMBER_OF_LINES, STREET_HAS_PRIORITY and LINE_PRIORITY for control.
The parameters COUNTRY_NAME_IN_RECEIVER_LANGU, LANGUAGE_FOR_COUNTRY_NAME and NO_UPPER_CASE_FOR_CITY are address type-independent.
The address attributes can be read directly instead of being passed in the structures ADDRESS1/2/3, if the address is in the Central Address Management tables.
The Business Address Services keys must be passed instead of the structures ADDRESS1/2/3:
Address type 1: ADDRESS_NUMBER
Address type 2: ADDRESS_NUMBER and PERSON_NUMBER
Address type 3: ADDRESS_NUMBER and PERSON_NUMBER
The following parameters are used (Import) or filled (Export):
Address type 1
Import parameters:
ADDRESS_1
ADDRESS_TYPE
ADDRESS_NUMBER
SENDER_COUNTRY
RECEIVER_LANGUAGE
NUMBER_OF_LINES
STREET_HAS_PRIORITY
LINE_PRIORITY
COUNTRY_NAME_IN_RECEIVER_LANGU
LANGUAGE_FOR_COUNTRY_NAME
NO_UPPER_CASE_FOR_CITY
Export parameters:
ADDRESS_PRINTFORM
ADDRESS_SHORT_FORM
ADDRESS_SHORT_FORM_S
ADDRESS_DATA_CARRIER
ADDRESS_DATA_CARRIER_0
NUMBER_OF_USED_LINES
NAME_IS_EMPTY
ADDRESS_NOT_FOUND
ADDRESS_PRINTFORM_TABLE
Address type 2
Import parameters:
ADDRESS_2
ADDRESS_TYPE
ADDRESS_NUMBER und PERSON_NUMBER
SENDER_COUNTRY
RECEIVER_LANGUAGE
NUMBER_OF_LINES
STREET_HAS_PRIORITY
LINE_PRIORITY
COUNTRY_NAME_IN_RECEIVER_LANGU
LANGUAGE_FOR_COUNTRY_NAME
NO_UPPER_CASE_FOR_CITY
Export parameters:
ADDRESS_PRINTFORM
ADDRESS_SHORT_FORM
ADDRESS_SHORT_FORM_S
ADDRESS_DATA_CARRIER
ADDRESS_DATA_CARRIER_0
NUMBER_OF_USED_LINES
NAME_IS_EMPTY
ADDRESS_NOT_FOUND
ADDRESS_PRINTFORM_TABLE
Address type 3
Import parameters:
ADDRESS_3
ADDRESS_TYPE
ADDRESS_NUMBER und PERSON_NUMBER
SENDER_COUNTRY
RECEIVER_LANGUAGE
NUMBER_OF_LINES
STREET_HAS_PRIORITY
LINE_PRIORITY
COUNTRY_NAME_IN_RECEIVER_LANGU
LANGUAGE_FOR_COUNTRY_NAME
NO_UPPER_CASE_FOR_CITY
Export parameters:
ADDRESS_PRINTFORM
ADDRESS_SHORT_FORM
ADDRESS_SHORT_FORM_S
ADDRESS_DATA_CARRIER
ADDRESS_DATA_CARRIER_0
NUMBER_OF_USED_LINES
NAME_IS_EMPTY
ADDRESS_NOT_FOUND
ADDRESS_PRINTFORM_TABLE
Address type SPACE (default value; the previous interface up to Release 3.0B):
Import parameters:
ADRSWA_IN
ADDRESS_TYPE
ADDRESS_NUMBER (only for special cases such as Japan)
COUNTRY_NAME_IN_RECEIVER_LANGU
LANGUAGE_FOR_COUNTRY_NAME
NO_UPPER_CASE_FOR_CITY
Export parameters:
ADRSWA_OUT
NAME_IS_EMPTY
ADDRESS_PRINTFORM_TABLE
The following parameters correspond to each other (on the left the individual parameter - on the right the fields in the old interface structures ADRSWA_IN and ADRSWA_OUT):
ADDRESS_NUMBER                   -   no equivalent
PERSON_NUMBER                    -   no equivalent
SENDER_COUNTRY                   -   ADRSWA_IN-INLND
RECEIVER_LANGUAGE               -   ADRSWA_IN-SPRAS
NUMBER_OF_LINES                 -   ADRSWA_IN-ANZZL
STREET_HAS_PRIORITY             -   ADRSWA_IN-WAREN
LINE_PRIORITY                    -   ADRSWA_IN-PRIOR
COUNTRY_NAME_IN_RECEIVER_LANGU -   no equivalent
LANGUAGE_FOR_COUNTRY_NAME       -   no equivalent
NO_UPPER_CASE_FOR_CITY          -   no equivalent
ADDRESS_SHORT_FORM              -   ADRSWA_OUT-LINEK
ADDRESS_SHORT_FORM_S            -   no equivalent
ADDRESS_DATA_CARRIER            -   ADRSWA_OUT-LINED
ADDRESS_DATA_CARRIER_0          -   ADRSWA_OUT-LINED0
NUMBER_OF_USED_LINES            -   ADRSWA_OUT-ANZZL
NAME_IS_EMPTY                    -   no equivalent
ADDRESS_NOT_FOUND               -   no equivalent
ADDRESS_PRINTFORM_TABLE         -   no equivalent
The parameters are described in the parameter documentation.

Database Adapter: cannot access table with complex record type as columns

Hi all,
I cannot perform any operations on a table that has columns with complex record type.
I have created a table to store purchase order details.
Sample script:
CREATE type XX_CUST_INFO_TYP as object
ssn VARCHAR2(20),
rating NUMBER(15)
CREATE type XX_ITEM_TYP as object
item_name VARCHAR2(20),
unit_price NUMBER(15),
quantity NUMBER(15)
CREATE table XX_PORDER (cust XX_CUST_INFO_TYP, porder XX_ITEM_TYP);
When i try to access the table X_PORDER in jdev through a database Adapter, i receive the error as
"some tables contains columns that are not recognized by the database adpter"
1.) so in this case, how to include such tables that have complex types?
Also, check out this scenario also..
1. add a table through a database adapter
2. drop the table in backend
3. i can still see the table and its structure in the database adapter wizard even after restarting Jdeveloper.. How is it possible?
These are some really interesting scenarios to experiment. Please suggest your ideas on this..
Thanks All!

Hi Hem,
for a select you could select against a view. And for inserts you could create a stored procedure. They support complex types since 10.1.2. Complex types support in tables/views was added for 11 (next major release).
You might be able to use PureSQL as a workaround too, i.e.
insert into XX_PORDER values (XX_CUST_INFO_TYP(?,?), XX_ITEM_TYP(?, ?, ?))
As for your other problem, in 10.1.2/10.1.3 the DBAdapter wizard sits on top of the Jdev Offline Tables and TopLink Mapping Workbench components. When you remove a table in the wizard it won't delete the Offline DB component. It was added by the wizard, but afterwards it is public to the entire Jdev project. You must remove it from Jdev yourself. This has been improved for the next major release too, no artifacts from underlying components are created.
To remove it select:
Offline DB Objects -> <schema> -> <table> and try File.. Erase From Disk.
Thanks
Steve

Business Partner: Maintain addresses per role

Hi Guros
We have a customer in a bankin sector that needs to maintain multiple addresses per BP and role. What we see in the system is managing multiple addresses per BP.
The requirement is the following data model:
BP ->> roles ->> addresses.
Please advise how to meet this requirement.
Regards,
Benni Perzy

Hi Benni,
In the standard, this is not possible.
Address is a part of the Central Business partner data sets- and is totally independent of role.
In fact, role and address are different datasets that have a 1:n cardinality with the BP.
You would need to make a modification to realise this.
Option 1 :
Use the Adderss usage concept.
Create a new address type in TB009, e.g. : correspondence address. Now, to ensure that this address type is only linked to this role, hide this address type for all other roles (using code modification).
So only your special role can maintain and see correspondence addresses.
Option 2 :
Create a new relationship category. Suppose you want the BP to have multiple role dependent addresses, manintan these addresses for a master BP, and derive these addresses for other BP using the Assign Address function.
E.g : Suppose I want to see 10 addresses only in role employe. I maintain an Employee relationship with an organization, maintain 10 addresses for the org, and then derive the addresses for the BP using the orgnization addresses through the Employee relationship. You can make the role as a prerequisite for the relationship so the link is like this.
BP1> Role>Relationship->BP2-->Addresses
You would ultimately need to do some different to realize this requirement since this is not supported in the standard !
I hope this helps you.
Cheers,
Rishu.

View of values in nested table attribute of object type

Hi,
I have:create or replace type ctx_line is object (
ctx_name varchar2(40),
ctx_value varchar2(1000)
create or replace type ctx_tab is table of ctx_line;
create type tp as object (
id      number,
ctx     ctx_tab
create table tt of tp nested table ctx store as ctx_nesttab;
create or replace view v as
SELECT VALUE(o).id as id
FROM tt o;Now I want to create an another view containing fields ctx_name, ctx_value and a key (maybe NESTED_TABLE_ID?) to the parent record in tt table. I must be able to join that view to each other. This is necessary because I will use that views in Forms 4.5 (which do not support nested tables).
Can someone help me, please?

I'm not sure what you are looking for exactly but is it something like this?
SELECT id
     , p.ctx_name
     , p.ctx_value
FROM   tt
     , TABLE(ctx) pWith the following test data:
INSERT INTO tt VALUES(1,CTX_TAB(CTX_LINE('A','SOME VALUE1')));
INSERT INTO tt VALUES(1,CTX_TAB(CTX_LINE('B','SOME VALUE2')));
INSERT INTO tt VALUES(1,CTX_TAB(CTX_LINE('B','SOME VALUE2')));this is the result:
SQL> SELECT id
2       , p.ctx_name
3       , p.ctx_value
4 FROM   tt
5       , TABLE(ctx) p
6 /
        ID CTX_NAME                                 CTX_VALUE
         1 A                                        SOME VALUE1
         1 B                                        SOME VALUE2
         1 B                                        SOME VALUE2

Count number of distinct values for a column for all tables that contains that column

Imagine I have one Column called cdperson. With the query below I know which Tables have column cdperson
select
t.[name]fromsys.schemassinnerjoin
sys.tables
tons.schema_id=t.schema_idinnerjoin
sys.columnscont.object_id=c.object_idinnerjoin
sys.types
donc.user_type_id=d.user_type_idwherec.name ='cdperson'
now I want to know for each table, how many distinct values of cdperson I have and I want the result ordered by the table that has more distinct values (descending)
Table1
   cdperson                        select distinct(cdperson) = 10
   cdadress
   quant
Table2 with
   cdaddress                      (no column cdperson in this table)
   quant
Table3
   cdperson                        select distinct(cdperson) = 100
   value
Table 4
   cdperson                        select distinct(cdperson) = 18
   sum
I want this result ordered by number of distinct cdperson
table3   100
table4   18
table    10
Thks for your answers

I had to add schema name to the above script to make it work in AdventureWorks:
CREATE TABLE #temp(TableName sysname , CNT BIGINT)
DECLARE @QRY NVARCHAR(MAX);
SET @qry=(SELECT
N'INSERT INTO #TEMP SELECT '''+schema_name(t.schema_id)+'.'+T.[name] +''' AS TableName, COUNT (DISTINCT ProductID) DistCount FROM '+
schema_name(t.schema_id)+'.'+t.[name] +';'
FROM sys.schemas s INNER JOIN sys.tables t ON s.schema_id=t.SCHEMA_ID
INNER JOIN sys.columns c ON t.object_id=c.object_id INNER JOIN sys.types d ON c.user_type_id=d.user_type_id
WHERE c.name ='ProductID'
FOR XML PATH(''))
EXEC(@QRY)
SELECT * FROM #temp ORDER BY TableName
DROP TABLE #temp
Production.Product 504
Production.ProductCostHistory 293
Production.ProductDocument 31
Production.ProductInventory 432
Production.ProductListPriceHistory 293
Production.ProductProductPhoto 504
Production.ProductReview 3
Production.TransactionHistory 441
Production.TransactionHistoryArchive 497
Production.WorkOrder 238
Production.WorkOrderRouting 149
Purchasing.ProductVendor 211
Purchasing.PurchaseOrderDetail 211
Sales.SalesOrderDetail 266
Sales.ShoppingCartItem 3
Sales.SpecialOfferProduct 295
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

How do I reference a table in a cell so that when I type in a word, other cells in that row are automatically filled in?

I'm making a cheat sheet for my fantasy football league. To this point I have separate sheets that list players at various positions (the sheets are characterized by the positions they cover i.e. quarterback/running back etc). I also have at the end a table that lists a team abbreviation (identical to how I would reference the team in the other sheets) with that team's bye week and schedule listed.
I want to be able to type a team name next to a player's name and have that team's information be filled into the cells on the same row, by referencing that table I have at the end.
Can anyone help? Very much appreciated. Thanks.

Take a look at VLOOKUP in the iWork Formulas and Functions User Guide.
You'll also find several discussions here on essentially the same question by searching for VLOOKUP. Also check the More Like This list to the right of these messages.
Regards,
Barry
PS: The iWork Formulas and Functions User Guide may be downloaded via the Help menu in Numbers.
B

Table that has the hier text names and the corresponding hier ID

Hi,
Would anyone happen to know the table that has the hier name text as it appears from the infoObject level and the corresponding Internal hierarchy ID (unique ID) for data element RSHIEID. I would want ot be bale to match the text name o f the hier to the hier ID.
Thanks
Will

Trying to make it simpler taking the 0material hierarchy note that the 0material has been loaded with 3 different hierarchies:
fields in the H table:
HIEID - 434FLR9O6DX0XXJS3CLIYZODD (Refers to the particular hierarchy as mentioned I have 3 hierarchies loaded to 0Material)
OBJVERS - Active and so on
NODEID - 4 digit internal number of the hierarchy
These are the Keys that identifies the hierarchy uniquely in my case the 1st hierarchy.
Now if you want to find the nodes then based on the example above I will take the hierarchy id ie 434FLR9O6DX0XXJS3CLIYZODD for the field HIEID that would give me all the nodes of this hierarchy
Note: the HIEID for a particular hierarchy can be found from the HEADER info
Thanks,
Raj

Table that stores Analysis authorization values

Hi all,
       We generated analysis authorizations for users on Profit centers. In RSECADMIN for each user we see an automatic authorization object being assigned with a name like RSR_000234 so on. We can see the values (profit centers) for this object when we double click on it. I would like to create a list of all users and the assigned profit centers. Can you please tell me if a table is available to get this list.
Thanks,
Ram.

Chetan,
         We are loading authorizations values to 0PROFIT_CTR from ECC and flatfile into the Authorization DSO's and generating authorizations to assing the profit centers to users. I would like to see the profit centers assigned to a user. For example suppose if a user is assigned a particular region. I would like to see all the values of the profit centers assigned to the user from a table rather than going to the hierarchy and getting the list for each region.
        The tables that you specified give the userid and the technical name of the authorization(RSR_000234..) but I would like to see the actual values in the authorization.
      Hope I am clear. Thank you for your assistance.
Ram.

Maintaining Service Arrangement for Employees: Address type-ID not availabl

Hello,
I´m facing the following problem while implementing CRM Service via Best Practices for CRM V1.70:
Building Block Configuration Guide C26 CRM SERVICE:
Section 3.3.3 WFM Core Settings:
3.3.3.1 Maintaining Service Arrangements for Employee
Assignment Block u2018Service Arrangementsu2019:
In Assignment block Location there is no address type-ID u2018XXDEFAULTu2019 for adress source u2018Organizationu2019. Thus I receive the following error message: u2018Enter a valid address usage typeu2019. Address type-ID u2018XXDEFAULTu2019 is only available for adress source u2018Individualu2019.
What exactly do I have to do in order to make address type-ID u2018XXDEFAULTu2019 also available for adress source u2018Organizationu2019.
Thanks in advance.
Best regards,
AEV

Hi,
I am facing similar problem what did you do to resolve it.
Thanks in advance.
Rahul

PO structures or tables that hold the values at Routine level

hi
can any one tell me what are all the MM structures or tables that holds value of mode of transport (OIC_MOT) and Order acknowledgment requirement (KZABS) values at VOFM routine level.
if we caunt find these values at the routine level through structures, is there any other method to get those values at the routine level
vamsi

hi Mav,
it's normal to have + and - records in infocube, the way infocube work is always ADD/INSERT records, any changes to data will be - first then insert new value, e.g
Data come from transaction
Date           Customer     Order Qty
12.12.2005     A            100
Data go to infocube
Date           Customer     Order Qty
12.12.2005     A            100
Then transaction change :
Date           Customer     Order Qty
12.12.2005     A            50
so in infocube will have 3 records :
12.12.2005     A            100
12.12.2005     A           -100
12.12.2005     A             50
-- total = 50 (correct)
so its' normal to have - in infocube
you can eliminate these records by do infocube compression.
hope this helps.

Table that maintain address type corresponding to value in PA0006

Similar Messages

Maybe you are looking for