Batch input help

HI,
I wont to avoid message in TR. cne1 .
when i put project & i remove the V from Processing Options (test run) And Excute i get pop-up with text:
Actual values can be deleted and i don't wont it (pop-up)
how can i remove it?
i try with batch-input but i don't success .
how i can do that?
i reward kindly for helping answer .
Regards

Hi Ramiro Escamilla ,
Thanks for your replay i am desperate,
i try K_ABC_PROGR_DEGREE_FOR_PROJECT
but it don't exist,
i find Enhancement GRWTAUTH maybe i can do it in it?
i don't now to use user exit maybe you can give me direction?
Best REgards

Similar Messages

Batch input: help to delete a field

Hi, I have a little problem with my program, My program have a field PLMKB-QMTB_WERKS, I need to clear this field but I can´t, I dont Know why I can´t to delete this field, If I put another value like '9999' the program take this value, but If I put ' ' or SPACE, it dont do it anything.
I appreciate your help.
Thanks

Hi,
Check if you are clearing the work area at the end of the loop. Once the record is processed from the work area , you should clear it before starting the processing of next transaction.
Regards,
Siddhesh

Problem Recording FMX1 Transaction for Batch Input. Plz Help

Hi Everyone!!!
I'm using the Transaction SHDB to create a new recording over the FMX1 Transaction for a Batch Input. The strange thing is that when i'm about to save the recording i get the following error:
"A runtime error: SAPSQL_ARRAY_INSERT_DUPREC"
I tried using the transaction FMX1 with the same data(constants), and it works perfectly. And I know it's not a duplicated key or anything, it works fine when i use the transaction.
This lead me to think that the problem is somewhere when i try to record the transaction.
Any Ideas of how to fix the problem, or does anyone knows if its a SAP problem that needs some kind of fix.
Any help would be really aprreciated!
Thx again.

Try using recording method and try to post 1 item...U will get the recording. In this recording, the field might be shown up which can be used.

Please help me with some questions with batch input session?

hello everyone.
I come to some questions like
1 What is a batch input session ,
2 What is the alternative to batch input session?
3 An ABAP program creates a batch input session.   We need to submit the program and the batch session in back ground. How to do it?
   would you please help me with the questions, couldn't thank you more.
   Best regards
                                                                      Frank

Hi
Batch Input Session:
BATCH INPUT SESSION is an intermediate step between internal table
and database table. Data along with the action is stored in session
ie data for screen fields, to which screen it is passed, program
name behind it, and how next screen is processed.
Three processing modes of executing Batch Input Session :-
Run Visibly : You can correct faulty transactions online & work step-by-step through the transactions not yet executed.
Display Errors only : You can correct faulty transactions online.   Transactions not yet executed, but without error, run in the background.
Run in Background .
2) What is the alternative to batch input session?
Call transaction.
3) An ABAP program creates a batch input session. We need to submit the program and the batch session in back ground. How to do it?
go to SM36 and create background job by giving
     job name,job class and job steps (JOB SCHEDULING)

LSMW for Listings via Batch Input recording - Help ?

Hi
Has anyone had any luck with trying to upload Listings via LSMW at all ?
I have created on, via batch input recording
I have lots of records with entries from 1 to 16
I have recorded enough entries to cope with 16
However when i try to execute the batch session, if there is only 1 material that requires an entry, then i cannot get past this screen, the LSMW is wanting entries for the next line and so on
I presume I must have to put some sort of a ruling in per Material number it is expecting, so if it is not poupulated then to move on, but to save the entries that have already been made
I do not have much experience in writing rules into LSMW so
Any ideas / help would be much appreciated
Thanks
Tony

Hello Tony,
In the past I have suggested this to few people and were successful with this link, please try, but only thing you need to take care is use VB02 instead of XK01 with reference to this link what I am trying to say.
http://youtu.be/fz94PcvtdZw
Regards,
Sridhar.

HELP with a Batch Input - Transaction VF01

Hi
It's me again, with another question... this time it's a Batch Input, creating a delivery with more than 20 items, how can I do with the error
Field KOMFK-VBELN(69) does not exit in the screen SAPMV60A 0102
and if I click on OK-Code how to indicate (in code lines) to simulate the process EDIT (From Menu bar) More Documents F7
Thanks in advance!!!
Tokio

Thanks to all of you...
These are my fist lines to answer one of my posted problems ...
Preview code lines:
perform bdc_dynpro using 'SAPMV60A' '0102'.
 loop at entregas.
 move sy-tabix to fila.
 concatenate 'KOMFK-VBELN(' fila ')' into cadena.
 perform bdc_field using cadena entregas-entrega.
IF FILA GE '20'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE' '=P+'.
 MOVE SY-TABIX TO FILA.
 CONCATENATE 'KOMFK-VBELN(' FILA ')' INTO CADENA.
 PERFORM BDC_FIELD USING CADENA ENTREGAS-ENTREGA.
 ENDIF.
New code lines:
CLEAR ENTREGAS.
PERFORM BDC_DYNPRO USING 'SAPMV60A' '0102'.
LOOP AT ENTREGAS.
 MOVE SY-TABIX TO FILA.
 IF FILA LT 22.
 CONCATENATE 'KOMFK-VBELN(' FILA ')' INTO CADENA.
 PERFORM BDC_FIELD USING CADENA ENTREGAS-ENTREGA.
 ENDIF.
 IF FILA EQ 22.
 CONCATENATE 'KOMFK-VBELN(' FILA ')' INTO CADENA.
 PERFORM BDC_FIELD USING CADENA ENTREGAS-ENTREGA.
 PERFORM BDC_OKCODE USING '=FKAN'.
 PERFORM BDC_DYNPRO USING 'SAPMV60A' '0102'.
 ENDIF.
 IF FILA GE 23. BREAK FOSTKFRT.
 DATA: FILA2(2), CNT2 LIKE SY-TABIX VALUE 2. MOVE CNT2 TO FILA2.
 CONCATENATE 'KOMFK-VBELN(' FILA2 ')' INTO CADENA.
 PERFORM BDC_CURSOR USING CADENA.
 PERFORM BDC_FIELD USING CADENA ENTREGAS-ENTREGA.
 CNT2 = CNT2 + 1.
 ENDIF.
ENDLOOP.
CLEAR CNT2.
I hope these lines could help.
Regards
Tokio

Help in batch input

HI,
if u go to transaction CNE1 & i put project number ,
and i remove the v from TEST RUN and i Execute,
i get pop-up with message : Actual values can be deleted.
i don't wont this pop-up how can i neutralize it?
i try with batch input but i don't success ,i do save after i push V TO POP-UP and when i check it in process the massege still come,
what i do wrong?
plz help
i reward
Regards

Hi shyla kumar
i try it but when i check it in process i get this massage maybe u have idea?
Actual values can be deleted
    Message no. 7A060
Diagnosis
    When you determine the POC or ea
    current one, the actual values f
    working in are deleted.
System response
Procedure
Procedure for System Administration
Regards

Help PA30 batch input (infotypes 45, 267, 15 )

Hi developers..
Any code for this batch input?
im going to do a batch input for the following infotypes in PA30 transaction.
267
45
15 sub 9900
any help is more than welcome
tks in advance

Hi
You can use FM HR_INFOTYPE_OPERATION for CREATING inforecords.
For eg:
p0045-pernr = pernr.
p0045-subty = subty.
p0045-begda = begda.
p0045-endda = endda.
p0045-darbt = darbt.
p0045-dkond = dkond.
p0045-tilbt = tilbt.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
 EXPORTING
 infty = '0045'
 number = pernr
 subtype = subty
 record = p0045
 operation = create
 nocommit = nocommit
 IMPORTING
 return = return
 key = bapikey
 EXCEPTIONS
 OTHERS = 0.
Regards,
Raj

Error: No batch input data for screen SAPMZVKDIALOGDEMO 1000 Help Needed

Hi Experts!
I wrote a program for BDC. I am attaching the code herewith. When i am trying to process the session in SM35, i was getting the error: No batch input data for screen SAPMZVKDIALOGDEMO 1000. Can anyone please tell me, what am i doing wrong.
Thanks.
REPORT zvkbdcdemo01.
DATA: bdc_tab LIKE bdcdata OCCURS 6 WITH HEADER LINE.
DATA: session LIKE apqi-groupid VALUE 'Session #1'.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
 client = sy-mandt
* DEST = FILLER8
 group = session
* HOLDDATE = FILLER8
* KEEP = FILLER1
 user = sy-uname
* RECORD = FILLER1
* PROG = SY-CPROG
* IMPORTING
* QID =
* EXCEPTIONS
* CLIENT_INVALID = 1
* DESTINATION_INVALID = 2
* GROUP_INVALID = 3
* GROUP_IS_LOCKED = 4
* HOLDDATE_INVALID = 5
* INTERNAL_ERROR = 6
* QUEUE_ERROR = 7
* RUNNING = 8
* SYSTEM_LOCK_ERROR = 9
* USER_INVALID = 10
* OTHERS = 11
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM fill_bdc_tab.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
 tcode = 'ZVKTR001'
* POST_LOCAL = NOVBLOCAL
* PRINTING = NOPRINT
* SIMUBATCH = ' '
* CTUPARAMS = ' '
TABLES
 dynprotab = bdc_tab
* EXCEPTIONS
* INTERNAL_ERROR = 1
* NOT_OPEN = 2
* QUEUE_ERROR = 3
* TCODE_INVALID = 4
* PRINTING_INVALID = 5
* POSTING_INVALID = 6
* OTHERS = 7
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'BDC_CLOSE_GROUP'
* EXCEPTIONS
* NOT_OPEN = 1
* QUEUE_ERROR = 2
* OTHERS = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form fill_bdc_tab
* text
FORM fill_bdc_tab.
REFRESH bdc_tab.
PERFORM populate_bdc_tab USING:
'1' 'SAPMZVKDIALOGDEMO' '1000',
' ' 'SFLIGHT-CARRID' 'LH',
' ' 'SFLIGHT-CONNID' '0400',
' ' 'SFLIGHT-FLDATE' '07/07/2007',
' ' 'SFLIGHT-PRICE' '1982',
' ' 'SFLIGHT-CURRENCY' 'EUR',
' ' 'SFLIGHT-PLANETYPE' 'A310-300',
' ' 'BDC_OKCODE' 'CREA'.
ENDFORM. "fill_bdc_tab
*& Form POPULATE_BDC_TAB
* text
* -->FLAG text
* -->VAR1 text
* -->VAR2 text
FORM populate_bdc_tab USING flag var1 var2.
CLEAR bdc_tab.
IF flag = '1'.
 bdc_tab-program = var1.
 bdc_tab-dynpro = var2.
 bdc_tab-dynbegin = 'X'.
ELSE.
 bdc_tab-fnam = var1.
 bdc_tab-fval = var2.
ENDIF.
APPEND bdc_tab.
ENDFORM. "POPULATE_BDC_TAB

This normally means that you are trying to insert data on a screen for which a particular field is not available.
So check screen number, screen fields and report name. In case of screen fields, use F1, F9 (technical information), and check the name of the screen field for batch processing (all the way at th bottom of the pop-up). This can differ from actual name of the screen field.
If all this is ok, try to create a recording of the transaction with SM37.

Physical inventory With the help of Batch input method

Dear all;
Can anyone tell me the procedure of Physical inventory procedure with batch input method ?
kindly Give me the step .
Thanking you;
Regarsds;
Joydeep mukherjee

Hi,
Go through this following code,
selection-screen begin of block B2 with frame title TEXT-005.
selection-screen begin of line.
parameters:     P_BIRPT type C radiobutton group RAD1 default 'X' user-command UCOMM.
selection-screen comment 3(20) TEXT-002 for field P_BIRPT.
selection-screen end of line.
selection-screen begin of line.
parameters:     P_COLRPT type C radiobutton group RAD1.
selection-screen comment 3(20) TEXT-003 for field P_COLRPT.
selection-screen end of line.
selection-screen begin of line.
parameters:     P_PAYRPT type C radiobutton group RAD1.
selection-screen comment 3(20) TEXT-004 for field P_PAYRPT.
selection-screen end of line.
selection-screen end   of block B2.
selection-screen begin of block B1 with frame title TEXT-001.
select-options: SO_KTOKD for KNA1-KTOKD modif id M4,
          SO_BLART for BSIS-BLART modif id M2.
parameters:     P_PAID   type ZCLEAR     modif id M3 as listbox visible length 20.
selection-screen end   of block B1.
at selection-screen output.
loop at screen.
    if P_BIRPT eq 'X'.
      if SCREEN-GROUP1   = 'M2' or SCREEN-GROUP1 = 'M3' .
        SCREEN-INVISIBLE = '1'.
        SCREEN-ACTIVE    = '0'.
        modify screen.
      endif.
    elseif P_COLRPT eq 'X'.
      if SCREEN-GROUP1   = 'M3'.
        SCREEN-INVISIBLE = '1'.
        SCREEN-ACTIVE    = '0'.
        modify screen.
      endif.
    elseif P_PAYRPT eq 'X'.
      if SCREEN-GROUP1   = 'M2'.
        SCREEN-INVISIBLE = '1'.
        SCREEN-ACTIVE    = '0'.
        modify screen.
      endif.
      if SCREEN-GROUP1   = 'M4'.
        SCREEN-INVISIBLE = '1'.
        SCREEN-ACTIVE    = '0'.
        modify screen.
      endif.
    endif.
endloop.
Thanks
Anil D

Help in batch input recording

HI Experts ,
if u go to transaction CNE1 & i put project number ,
and i remove the v from TEST RUN and i Execute,
i get pop-up with message : Actual values can be deleted.
i don't wont this pop-up how can i neutralize it?
i Try with Batch input, i recored the process and when i get the pop-up i push V and save,
but when i try to run process again i get the pop-up again .
I Think that here is the problem this is the pop-up (in bold i check in appl.data ) i can change it?
T CNE1
SAPLKAZB 1000 X
BDC_CURSOR RKAUF-TEST
BDC_OKCODE =RUN
RKAUF-TEST
*BDC_SUBSCR SAPLCNEV_01_MASTER_DATA* 0550BLOCK1
LKP74-PSPID E0-0005
BDC_SUBSCR SAPLKAZB 2450BLOCK2
RPSCO_X-VERSN_EV N01
RKAUF-TO 5
RKAUF-GJAHR 2008
Regards

hi,
sorry in this line :
BDC_SUBSCR SAPLCNEV_01_MASTER_DATA 0550BLOCK1
Regards

Batch input of a list of values

Hello,
I have to make a batch input of a list.
The screen of the transaction contains a list with 9 lines, if i enter a value in one, another line is added to the list.
I did record this transaction and have an incremented list in the generated program that looks like this :
it begins whith ADRPCIT-POST_CODE(01) and increments till 09
perform bdc_dynpro using 'SAPLSZRL' '0400'.
perform bdc_field using 'BDC_CURSOR'
 'ADRPCDCITY-POST_CODE(08)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_field using 'ADRPCDCITY-POST_CODE(08)'
 record-POST_CODE_08_017.
perform bdc_dynpro using 'SAPLSZRL' '0400'.
perform bdc_field using 'BDC_CURSOR'
 'ADRPCDCITY-POST_CODE(09)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_field using 'ADRPCDCITY-POST_CODE(09)'
 record-POST_CODE_09_018.
perform bdc_dynpro using 'SAPLSZRL' '0400'.
perform bdc_field using 'BDC_CURSOR'
 'ADRPCDCITY-POST_CODE(09)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_dynpro using 'SAPLSZRL' '0400'.
perform bdc_field using 'BDC_CURSOR'
 'ADRPCDCITY-POST_CODE(07)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_field using 'ADRPCDCITY-POST_CODE(07)'
 record-POST_CODE_07_019.
perform bdc_dynpro using 'SAPLSZRL' '0400'.
perform bdc_field using 'BDC_CURSOR'
 'ADRPCDCITY-POST_CODE(08)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_field using 'ADRPCDCITY-POST_CODE(08)'
 record-POST_CODE_08_020.
perform bdc_dynpro using 'SAPLSZRL' '0400'.
perform bdc_field using 'BDC_CURSOR'
 'ADRPCDCITY-POST_CODE(09)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_field using 'ADRPCDCITY-POST_CODE(09)'
 record-POST_CODE_09_021.
perform bdc_dynpro using 'SAPLSZRL' '0400'.
perform bdc_field using 'BDC_CURSOR'
 'ADRPCDCITY-POST_CODE(09)'.
perform bdc_field using 'BDC_OKCODE'
 '=SAVE'.
What i did is setting the value of the incremented number to 09 if it's greater than 09 but i'm not sure it's the right way to do it cause i get only 9 records
My code :
LOOP AT gt_record ASSIGNING <fs_record>.
 IF sy-tabix > 9.
 ligne = 9.
 ELSE.
 ligne = sy-tabix.
 ENDIF.
 IF ligne > 1.
 IF city_mem EQ <fs_record>-city_code_001.
 flag_end = 'X'.
 ELSE.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=SAVE'.
 PERFORM bdc_transaction USING 'SR10'.
 CLEAR flag_end.
 ENDIF.
 ENDIF.
 city_mem = <fs_record>-city_code_001.
 IF flag_end NE 'X'. "premier passage
 PERFORM bdc_dynpro USING 'SAPLSZRC' '0100'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'ADRCITYD-CITY_CODE'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'ADRCITYD-CITY_CODE'
 <fs_record>-city_code_001.
 PERFORM bdc_field USING 'ADRCITYD-COUNTRY'
 'FR'.
 PERFORM bdc_field USING 'ADRCITYD-LANGU'
 'F'.
 PERFORM bdc_dynpro USING 'SAPLSZRC' '0200'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'ADRCITYD-COMMU_CODE'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'ADRCITYD-FLAG_STRTS'
 'X'.
 PERFORM bdc_field USING 'ADRCITYD-CITY_NAME'
 <fs_record>-city_name_005.
 PERFORM bdc_field USING 'ADRCITYD-REGION'
 <fs_record>-region_006.
 PERFORM bdc_field USING 'ADRCITYD-TIME_ZONE'
 'CET'.
 PERFORM bdc_field USING 'ADRCITYD-COMMU_CODE'
 <fs_record>-commu_code_008.
 PERFORM bdc_field USING 'ADRCITYD-DEF_LANGU'
 'F'.
 PERFORM bdc_dynpro USING 'SAPLSZRC' '0200'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'ADRCITYD-CITY_NAME'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=PSTC'.
 PERFORM bdc_field USING 'ADRCITYD-FLAG_STRTS'
 'X'.
 PERFORM bdc_field USING 'ADRCITYD-CITY_NAME'
 <fs_record>-city_name_005.
 PERFORM bdc_field USING 'ADRCITYD-REGION'
 <fs_record>-region_006.
 PERFORM bdc_field USING 'ADRCITYD-TIME_ZONE'
 'CET'.
 PERFORM bdc_field USING 'ADRCITYD-COMMU_CODE'
 <fs_record>-commu_code_008.
 PERFORM bdc_field USING 'ADRCITYD-DEF_LANGU'
 'F'.
* PERFORM bdc_dynpro USING 'SAPLSZRL' '0400'.
 ENDIF.
 PERFORM bdc_dynpro USING 'SAPLSZRL' '0400'. "ajout2
 lignec = ligne.
 CONCATENATE 'ADRPCDCITY-POST_CODE(' lignec ')' INTO cp.
 PERFORM bdc_field USING 'BDC_CURSOR'
 cp.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING cp
 <fs_record>-post_code_01_016.
ENDLOOP.
* deniere sauvegarde
PERFORM bdc_field USING 'BDC_OKCODE'
 '=SAVE'.
PERFORM bdc_transaction USING 'SR10'.
CLEAR flag_end.
PERFORM close_group.
PERFORM close_dataset USING dataset.
Can somebody help me on this one ?
Thank you,
Tom.

If it is table control you may have to pass PageDown after 9 rec & again start with (01)
record number remains 1 to 9 but Top_line parameter will change to 9or10 after 1 pagedown.
Cxould be P++
you can record Pagedown & check recording.

Manual bank statement: no batch input was generated

Hi,
maybe somebody has a clue with this problem regarding FF67: after the data processing, no batch input is generated in order to post the bank statement.
Please, I need your help with an OSS note or with a posting solution without batch input ( I tried to process the bank statement with "processing type = 4", but it didn't work).

Hi Andrea,
Try to add value in Session name for bank postings
Do not hesitate to ask for further clarifications. Award points if useful.
Regards,
Siva

Batch input for IQ02 not accepting "yes" for 'POPUP_TO_CONFIRM'

Hello,
I wrote a batch input for a transaction (IQ02) and all works fine except one thing:
-when all data is entered and SAVE button is pressed, there is an additional pop-up, from an user exit which needs an YES/NO answer.
The function module used to display the popup is: 'POPUP_TO_CONFIRM'
I do not manage to press the YES button. This is the data I receive when pressing F1 on YES button:
Program SAPLSPO1
Function OPT1
Normally, in batch input, this is the way I pass user-commands:
PERFORM bdc_dynpro USING 'SAPMIEQ0' '0101'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
But it's not working for this particular situation.
Any ideas?
Thank you.
Edited by: Julius Bussche on Jan 5, 2009 2:07 PM
Quality of subject title improved.

Hi
Find out under which condition popups appears.
for that condition you have to put the following code
PERFORM bdc_dynpro USING 'SAPLSPO1' ''<SCREEN_NUMBER>'.
PERFORM bdc_field USING 'BDC_OKCODE' '=OPT1' .
Hope this helps,
Rajat

Error while creating a product group--Batch input error 9

Hi,
While creating a product group in T-code MC84, getting the error message" Product group can not be created (Batch input error 9)". Would appreciate providing yr help to resolve above issue.
Thks,
Nilesh

Hi Neel,
As ponited by you, the material type "PROD" is realted with creation of product group.I am able to resolve the error, "actually the work schedulling & MRP views were not activated for "PROD" resulting in the above error.
Thks for yr help.
Regards,
Nilesh

Batch input help

Similar Messages

Maybe you are looking for