Looking for some demo on shipment and shimpment cost in Transportation
Hi, everybody:
I wanna some demo on shipment and shipment cost function of Transportation.
Would you send some documents to my e-mail box below:
[email protected]
Thanks for your kind help!
Justin
Hi Justin could you forward the mails you got to my mail id
[email protected]
Thanks in advance
Similar Messages
-
I was looking for a hotel on mozilla and the first hotel exhibiting in the ad is not aligned with knowledge panel. However it is showing correct result on other browsers. This error is not just contained for one hotel ad but to other as well. I am just curious if it's an issue from their end or some technical syntax error in mozilla
Please find an attachment.
Thanks.You may have zoomed web page(s) by accident.
Reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl/Command+0 (zero))
*http://kb.mozillazine.org/Zoom_text_of_web_pages
If you have made changes to Advanced font settings like increasing the minimum/default font size then try the default minimum setting "none" and the default font size 16 in case the current setting is causing problems.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow pages to choose their own fonts.
*Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
It is better not to increase the minimum font size, but to use an extension to set the default page zoom to prevent issues with text not being displayed properly. -
I am fairly new to MAC products and just purchased a new iMac, which I love! Can anyone recommend some more detailed literature or site for learning my way around the nuances of my iMac? copy and paste, building folders, storing data, bookmarking etc...
These are the Mac Essentials. The most Basic function tools of the Mac
http://support.apple.com/kb/HT2477
These are Mac 101 Articles. These are a bunch of articles that have the information on any app that is on your computer.
http://support.apple.com/kb/index?page=search&src=support_site.kbase.search&loca le=en_US&q=101
This is an article that will help you get used to your new Mac since you're Moving from a PC to Mac
http://www.apple.com/support/switch101/ -
I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get these things working. I know that I have to identify my camera through the DHCP table and set up port forwarding and there is the problem.
My network consists of 4 base stations set up in a roaming network - same network name and passwords. I need to do it this way so I don't have to switch network when I move from one side of the house to the other, go to the cabana, or my shop in the barn. The network works pretty well since I went to a roaming set up. Good performance, yata, yata, yata.
However, the roaming network requires the AEBS's to be set up in bridge mode, rather than sharing an ip address. When the AEBS is set to bridge mode, you don't see a DCHP table or have the ability to identify your IP Cam through the AEBS - and hence, no port forwarding.
I am able to identify and set up my Linksys IP Cam by locating the ip address on my FIOS router, even though, it's plugged into an AEBS. I set it up, see the video, remove the ethernet cable from the IP Cam, restart - and I can't get to it from an AEBS. In researching this, it appears, I should be setting up the AEBS to "share an IP Address", going to the DHCP table and identifying the camera's IP address and setting up port forwarding. However, you don't see any of the DHCP or port forwarding options in Airport Network Utility when configuring in bridge mode.
I'm hoping I'm missing something here and that the solution isn't to set it up at the FIOS router level, but I'm beginning to think that's my only hope. What concerns me there is that I should be able to see the IP cam on the network without port forwarding since I'm not coming from outside, and I can't even do this unless it's connected hard wire.
I'd appreciate any insight into this that anyone might have. I've hit the wall with what I know.
Thanks.In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first. -
Looking for some VPN advice on c7200 and possible serious problem
Hi all,
I am looking for some advice on how to figure out few things.
customer has a c7200 with VPN module and seen the following
15.2(4)M4, RELEASE SOFTWARE (fc2)
Vpn7# Show crypto isakmp sa
Exemple: x.x.x.x y.y.y.y QM_IDLE 14020 ACTIVE ( repeated around 700 times)
Vpn7# IKE-Session : 2517 active, 5120 max, 3169 failed
Hardware Encryption : ACTIVE
Number of hardware crypto engines = 1
CryptoEngine VAM2+:7 details: state = Active
Capability : IPPCP, DES, 3DES, AES, RSA, IPv6, FAILCLOSE, HA
IKE-Session : 2800 active, 5120 max, 3169 failed
DH : 55 active, 5120 max, 0 failed
IPSec-Session : 1628 active, 10230 max, 0 failedhe would like to know whether these messages allude to some kind of serious problem or show the normal operation of vpn routers. because they need to analyse their business related incidents and do prevent actions
therefore if someone could give give me some advice if there is any problem with the hardware i would greatly appreciate it
thanks in advance
LanceI'd make sure to read the contract and any associated fine print really, really carefully before doing this. But back to your question - this is more of a marketing question and I'd suggest hiring a good marketer (or become one) to make the most of this opportunity.
And how do you find a good marketer?
I'd suggest using Seth Godin (http://sethgodin.typepad.com/) as your guide/model. If the person you want to hire knows and follows Seth's good marketing advice, you'll likely do very well. If they don't know who Seth Godin is and are obsessed with SEO rankings and email blasts, I'd be very worried (that's not to say SEO rankings and email blasts are "wrong" but that they shouldn't be the only options in your marketing approach).
Good luck! -
Looking for some good Arc and Circle drawing pdf code.
Hi I am looking for some suggestions on how to draw circles and arcs using PDF. My arcs have recently started to be drawn as chords in Adobe Reader 9.1.1. I am looking for example code o this nature (I know this is not circle or arc code this is just an example):
b
0 0 0 RG 0 0 0 rg
1 w 98 -156 m 104 -154 l 104 -158 l 0 0 0 RG 0 0 0 rg
b
0 0 0 RG 0 0 0 rg
1 w 398 -156 m 392 -154 l 392 -158 l 0 0 0 RG 0 0 0 rg
b
0 0 0 RG 0 0 0 rg
1 w 98 -156 m 396 -156 l S
BT /F1 10 Tf 243 -151 Td (1.5") Tj ET
1 w 398 -196 m 392 -194 l 392 -198 l 0 0 0 RG 0 0 0 rg
b
i.e. actual PDF tokens.
If you know of a website that feature such examples I would appreciate the URL too.
ThanksJem,
Pardon me if I sound rude by suggesting that before you launch into an expensive printing job (which could result in disastrous consequences if you don't do it right) that you actually learn how to use the program first. You may also want to learn something about the offset printing process and how to prepare print jobs.
Even many Illustrator novices know that there is no such thing as a background in Illustrator, in the sense that there is in Photoshop. You will need to PLACE your Photoshop background as a high resolution CMYK tiff in the provided template. That's the answer to your second question. I don't really understand your first question. Maybe someone else will. Are you simply asking, "where do I begin?" If so, then you REALLY REALLY need to read a book on how to use Illustrator. The Adobe Illustrator Classroom in a Book might be the place to start.
"I'm pretty good with CPR. I'm helping a friend do his vasectomy and I already have all the equipment (scalpels, thread, etc.) I'm just having trouble figuring out where to cut." -
Looking for some advice on CEP HA and Coherence cache
We are looking for some advice or recommendation on CEP architecture.
We need to build a CEP application that conforms to the following:
• HA with no loss of events or duplicate events when failing over to the backup server.
• We have some aggregative rules that needs to see all events.
• Events are XMLs with size of 3KB-50KB. Not all elements are needed for the rules but they are there for other systems that come after the CEP (the customer services).
• The XML elements that the CEP needs are in varying depth in the XML.
Running the EPN on a single thread is not fast enough for the required throughput mainly because network latency to the JMS and the heavy task of parsing of the XML. Because of that we are looking for a solution that will read the messages from the JMS in parallel (multi thread) but will keep the same order of events between the Primary and Secondary CEPs.
One idea that came to our minds is to use Coherence cache in the following way:
• On the CEP inbound use a distributed queue and not topic (at the CEP outbound it is still topic).
• On the CEPs side use a Coherence cache that runs on the CEPs JVMs (since we already have a Coherence cluster for HA).
• Both CEPs read from the queue using multi threading (10 reading threads – total of 20 threads) and putting it to the Coherence cache.
• The Coherence cache is publishing the events to both CEPs on a single thread.
The EPN looks something like this:
JMS adapter (multi threaded) -> replicated cache on both CEPs -> event bean -> HA adapter -> channel -> processor -> ….
Does this sounds sound to you?
Are we over shooting here? Is there a simpler solution for our needs?
Is there a best practice for such requirements?
ThanksHi,
Just to make it clear:
We do not parse the XML on the event bean after the Coherence. We do it on the JMS adapter on multiple threads in order to utilize all the server resources (CPUs) and then we put it in the replicated cache.
The requirements from our application are:
- There is an aggregative query that needs to "see" all events (this means that we need to pass all events thru a single processor and we cannot partition them to several processors).
- Because this is a HA solution the events on both CEPs (primary and secondary) needs to be at the same order when reaching the HA inbound adapter and the processor.
- A single thread JMS adapter is not reading the messages from the JMS fast enough mainly because it takes time to parse the XML to an event.
- Using a multi-threaded adapter or many single threaded adapters with message selector will create a situation that the order of events on both CEPs will not be the same at the processor inbound.
This is why we needed a mediator so we can read in multiple threads that will parse the XMLs in parallel without concerning on order of messages and on the other hand publish all the messages on a single thread to the processors on both CEPs from this shared mediator (we use a replicated cache that runs on both JVMs).
We use queue instead of topic because if we read the messages from a topic on both CEPs it will be stored twice on the Coherence replicated cache. But if we use a queue, when server 1 read the message and put it in the Coherence replicated cache then server 2 will not read it because it was removed from the queue.
If I understand correctly you are suggesting replacing the JMS adapter with an event bean that will read the messages from the JMS directly?
Are you also suggesting that we will not use a replicated cache but instead a stand alone cache on each server? In this case how do we keep the same order of events on both CEPs (on both caches)? -
i have the new version of iMovie, and when i try to start the program, i can't because it says that it is looking for some movie files from the Iphoto, so all the program is locked up... how can i do to restart the program??
Hi
Did You ever use - iPhoto ?
Did You may be direct iPhoto to a different Photo Library
As iMovie tries to find the appropriate photo library - it can get lost if iPhoto direct it into a Library on a not connected external hard disk or to a strange location - And iMovie HANGS.
Do - When no other program is running that might interfere
• Start iPhoto - BUT NOW KEEP alt-key (option key) DOWN during the full Start-Up process
• Now iPhoto let's You select Photo Library
• Select the one in Your Account / Home folder / Pictures ! !
• Then iPhoto should start up OK
• Now Quit iPhoto
• START iMovie
Does it still hangs - then I would suspect - iMovie Pref. file
If it Run's OK - Then HURRAY !
Yours Bengt W -
HI everyone. Im looking for some help. Im getting the Itunes error 50 and No network connection error. I have a perfect connection. My iphod will not download and my ipad any help would be great.
A lot of people are experiencing it, which suggests that Apple is having issues. If that is the case all people can do is wait it out.
-
Looking for some creative friends and level advertisement
Im posting here to tell you guys that i need some friends that are mature and good at making levels, i have made a bunce a levels and 3 of them are fairley good. Also if anyone wants to play or look at them, here they are.
http://lbp.me/u/Moldy_Maggots/levels?p=1&l=12craigatadobe12345 wrote:
I am formatting a book, my first one, and am about to start refining the overall formatting to make it look beautiful. I'm running into a bit of a creative block, and am looking for some basic guidelines for book formatting. I'm wondering about fonts, how many to use, ideas about heading heiarchy's, fonts for tables relative to the rest of my text, etc. I have everthing formatted, but it just looks ackward and ugly because I don't have a sensitivity to the standards.
Does anyone know of a resource where I could find some guidance on this?
Self-Publishers Start Here: Planning Your Book
This site is mostly about self-publishing, but don't dismiss it until you've searched through its archives and followed its links to other resources. There's plenty of good stuff!
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices -
Looking for some assistancte in GUI_DOWNLOAD
Hi there,
See I have this exercise I have to do here. Basically I have to create a program that will download the contects of SBOOK to my pc. I have to use GUI_DOWNLOAD in this exercise. Also, the user will have to input the path and file name of the file to be downloaded to. I have place appropriate error message on the screen as well but I'm not sure how to do this.Being relatively new to this, I tried looking for some samples and this is what I came up so far.
REPORT ZISTANZS_TRNG_EX9C.
TABLES: SBOOK.
PARAMETERS: FILEINP(30) DEFAULT 'c:\TEMP\wee.txt' OBLIGATORY.
DATA: BEGIN OF ITAB OCCURS 100.
INCLUDE STRUCTURE SBOOK.
DATA: END OF ITAB.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = FILEINP
FILETYPE = 'ASC'
write_field_separator = 'X'
TABLES
DATA_TAB = ITAB
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
OTHERS = 3.
Unfortunately, it doesn't work though. It keeps saying that my FILENAME is not the same data type as FILEINP? I'm asking for some assistance in how this can be properly solved? Any help would be appreciated /Hi,
Please refer the code below:
* File download, uses older techniques but achieves a perfectly
* acceptable solution which also allows the user to append data to
* an existing file.
PARAMETERS: p_file like rlgrap-filename.
* Internal table to store export data
DATA: begin of it_excelfile occurs 0,
row(500) type c,
end of it_excelfile.
DATA: rc TYPE sy-ucomm,
ld_answer TYPE c.
CALL FUNCTION 'WS_QUERY'
EXPORTING
query = 'FE' "File Exist?
filename = p_file
IMPORTING
return = rc.
IF rc NE 0. "If File alread exists
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
* TITLEBAR = ' '
* DIAGNOSE_OBJECT = ' '
text_question = 'File Already exists!!'
text_button_1 = 'Replace'
* ICON_BUTTON_1 = ' '
text_button_2 = 'New name'
* ICON_BUTTON_2 = ' '
* DEFAULT_BUTTON = '1'
* DISPLAY_CANCEL_BUTTON = 'X'
* USERDEFINED_F1_HELP = ' '
* START_COLUMN = 25
* START_ROW = 6
* POPUP_TYPE =
IMPORTING
answer = ld_answer
* TABLES
* PARAMETER =
EXCEPTIONS
text_not_found = 1
OTHERS = 2.
* Option 1: Overwrite
IF ld_answer EQ '1'.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
* BIN_FILESIZE =
filename = p_file "File Name
filetype = 'ASC'
* IMPORTING
* FILELENGTH =
TABLES
data_tab = it_excelfile "Data table
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE i003(zp) WITH
'There was an error during Excel file creation'(200).
exit. "Causes short dump if removed and excel document was open
ENDIF.
* Option 2: New name.
ELSEIF ld_answer EQ '2'.
CALL FUNCTION 'DOWNLOAD'
EXPORTING
filename = p_file "File name
filetype = 'ASC' "File type
* col_select = 'X' "COL_SELECT
* col_selectmask = 'XXXXXXXXXXXXXXXXXXXXXXXXXX'
* "COL_SELECTMASK
filetype_no_show = 'X' "Show file type selection?
* IMPORTING
* act_filename = filename_dat
TABLES
data_tab = it_excelfile "Data table
* fieldnames =
EXCEPTIONS
file_open_error = 01
file_write_error = 02
invalid_filesize = 03
invalid_table_width = 04
invalid_type = 05
no_batch = 06
unknown_error = 07.
ENDIF.
ELSE. "File does not alread exist.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
* BIN_FILESIZE =
filename = p_file "File name
filetype = 'ASC' "File type
* IMPORTING
* FILELENGTH =
TABLES
data_tab = it_excelfile "Data table
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE i003(zp) WITH
'There was an error during Excel file creation'(200).
exit. "Causes short dump if removed and excel document was open
ENDIF.
ENDIF.
Thanks,
Sriram Ponna. -
Looking for some assurances that I haven't made a mistake switching to Mac.
Bought an intel-powered IMac 9 days ago and love everything about it's look, functionality, etc.. Only problem: I've had a bout of "Application has closed unexpectedly" occcurrances while using Safari (while at AOL.com deleting emails from aol account) and while editing pics in iPhoto. As this happened time and again, I got a sad, sinking feeling that I'm headed for the same frustrations that I've had w/ every Windows machine I've ever owned. Ugh!..I switched to Apple for the specific purpose of avoiding crashes!!! Apple support walked me through steps to fix (removed/updated Quicktime, and check a few other things..). They were very helpful, but... I absolutely detest having to do this. Other than Office:Mac, i've added nothing to this machine! I'm really stressed about this. I paid far more for this than I would have for a Windows machine simply because I had heard that Apple machines don't do this sort of thing!!
Please tell me that this is normal and expected with a new machine and not a harbinger of more complicated problems to come!! I'm hoping that once resolved, I won't much more of this.. On the other hand, if many of you feel that this issue is a bad omen, I'll take the machine back while I still can. ..What a pity though, it's truly been a joy to use so far.
IMAC (early 2006) Mac OS X (10.4.4)Hi syd123! And Welcome to Discussions!
No you haven't made a mistake! You will love your Mac!
Deleting AOL Mail, crashes Safari (Consolidation)
It seems the most recent Safari, and or 10.4.4, update has created this problem.
Apple & AOL are both aware of this, but, as far as I know, no correction has been implemented.
Here are some of the work arounds, that I have been able to discern from the various posts regarding this issue.
Use the FIREFOX BROWSER.
Use your AOL Mail program.
Use this utility AOL SERVICES ASSISTANT, to set up Apple Mail, to access AOL Mail.
Access the AOL Mail thru Classic AOL Webmail.
And here are links, to the various threads, discussing this issue.
<a href="http://discussions.apple.com/thread.jspa?threadID=314479&start=0&tstart=0 "Safari and AOL</a>
AOL/ Delete/ Safari crash
safari crashing with aol.com mail deletion
AOL Webmail and Safari on 10.4.2 crashes on delete mail
Update 10.4.4 causes crash
Safari crashes when deleting email on AOL
Safari Update
Safari Crashes AOL mail
Safari Crashes when Deleting or Reporting E-Mail as SPAM on AOL Web Mail
Looking for some assurances that I haven't made a mistake switching to Mac. This Thread
Good Luck!
ali b -
Looking for some advice dealing with Kernel Panics
Hi there! I'm looking for some help regarding constant kernel panics I've been getting on my machine. It has been happening pretty regularly for the last month or so, occuring sometimes three times in one day and other times none. I've been looking to see what might cause the issue and have thus far come up emptyhanded. I can't think of anything I've modified recently that would be causing the issue. I performed a hardware test using AHT and no errors were found. I've included both the most recent report from the panic as well as the EtreCheck report. Any and all advice is appreciated!
Thanks in advance!
Anonymous UUID: D680EEB6-4BD2-B93C-318E-D6D262CA3B53
Mon Apr 28 17:28:08 2014
panic(cpu 0 caller 0xffffff7f875b6fb0): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff811c014000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.35/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 0), Frame : Return Address
0xffffff80f57cb140 : 0xffffff8005222fa9
0xffffff80f57cb1c0 : 0xffffff7f875b6fb0
0xffffff80f57cb290 : 0xffffff7f85c94eab
0xffffff80f57cb350 : 0xffffff7f85d5e49a
0xffffff80f57cb390 : 0xffffff7f85d5e50a
0xffffff80f57cb400 : 0xffffff7f85fdd056
0xffffff80f57cb530 : 0xffffff7f85d81b39
0xffffff80f57cb550 : 0xffffff7f85c9b8fd
0xffffff80f57cb600 : 0xffffff7f85c99408
0xffffff80f57cb800 : 0xffffff7f85c9a386
0xffffff80f57cb8e0 : 0xffffff7f86c0c9c2
0xffffff80f57cb920 : 0xffffff7f86c1c37f
0xffffff80f57cb940 : 0xffffff7f86c4a33b
0xffffff80f57cb980 : 0xffffff7f86c4a39b
0xffffff80f57cb9c0 : 0xffffff7f86c21e15
0xffffff80f57cba10 : 0xffffff7f86bedb5e
0xffffff80f57cbaa0 : 0xffffff7f86be9ae7
0xffffff80f57cbad0 : 0xffffff7f86be7636
0xffffff80f57cbb00 : 0xffffff80056cbe03
0xffffff80f57cbb90 : 0xffffff80056cdcff
0xffffff80f57cbbf0 : 0xffffff80056cb81f
0xffffff80f57cbd40 : 0xffffff80052b6558
0xffffff80f57cbe50 : 0xffffff8005226bf1
0xffffff80f57cbe80 : 0xffffff80052139f5
0xffffff80f57cbef0 : 0xffffff800521e043
0xffffff80f57cbf70 : 0xffffff80052c976d
0xffffff80f57cbfb0 : 0xffffff80052f3b46
Kernel Extensions in backtrace:
com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[80472F2E-D31D-32C4-88BA-2EB3D63 C159F]@0xffffff7f85c45000->0xffffff7f85eadfff
dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f858bb000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[999E29DA-D513-3544-89D1-9885B728A098]@0xff ffff7f85c35000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f85b28000
com.apple.nvidia.classic.NVDANV50HalTesla(8.2.4)[B0E6AAA7-E970-3D81-8B43-145D56 A3A4AC]@0xffffff7f85eb8000->0xffffff7f86161fff
dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[80472F2E-D31D-32C4-88BA-2EB3D63 C159F]@0xffffff7f85c45000
dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f858bb000
com.apple.driver.AppleMuxControl(3.4.35)[1BFF66C1-65E4-3BB3-9DEE-B61C3137019B]@ 0xffffff7f875a9000->0xffffff7f875bbfff
dependency: com.apple.driver.AppleGraphicsControl(3.4.35)[09897896-ACBD-36B5-B1D4-0CCC4000E 3B3]@0xffffff7f875a1000
dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f85bdd000
dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f858bb000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f85b28000
dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[E04639C5-D734-3AB3-A682-FE66694C66 53]@0xffffff7f875a4000
com.apple.GeForceTesla(8.2.4)[B6C71E9A-E304-354B-80AD-C69C9032D367]@0xffffff7f8 6bcc000->0xffffff7f86c96fff
dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f858bb000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[999E29DA-D513-3544-89D1-9885B728A098]@0xff ffff7f85c35000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f85b28000
dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[80472F2E-D31D-32C4-88BA-2EB3D63 C159F]@0xffffff7f85c45000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
13C64
Kernel version:
Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
Kernel slide: 0x0000000005000000
Kernel text base: 0xffffff8005200000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 31531656545358
last loaded kext at 27797939824574: com.apple.driver.AppleUSBCDC 4.2.1b5 (addr 0xffffff7f876b9000, size 20480)
last unloaded kext at 27858255752654: com.apple.driver.AppleUSBCDC 4.2.1b5 (addr 0xffffff7f876b9000, size 16384)
loaded kexts:
com.splashtop.driver.SRXFrameBufferConnector 1.5
com.avatron.AVExFramebuffer 1.7
com.splashtop.driver.SRXDisplayCard 1.5
com.Cycling74.driver.Soundflower 1.5.2
com.avatron.AVExVideo 1.7
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOBluetoothSerialManager 4.2.3f10
com.apple.driver.AGPM 100.14.15
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleMikeyDriver 2.6.0f1
com.apple.driver.AppleHDA 2.6.0f1
com.apple.driver.AppleIntelHDGraphics 8.2.4
com.apple.driver.AppleIntelHDGraphicsFB 8.2.4
com.apple.GeForceTesla 8.2.4
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.3f10
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleMuxControl 3.4.35
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.driver.AppleUSBCardReader 3.4.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.6
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.5.1
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleUSBHub 666.4.0
com.apple.driver.AppleAHCIPort 3.0.0
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.AppleGraphicsDeviceControl 3.4.35
com.apple.iokit.IOSurface 91
com.apple.iokit.IOBluetoothFamily 4.2.3f10
com.apple.driver.DspFuncLib 2.6.0f1
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.5fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.3f10
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleHDAController 2.6.0f1
com.apple.iokit.IOHDAFamily 2.6.0f1
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleGraphicsControl 3.4.35
com.apple.nvidia.classic.NVDANV50HalTesla 8.2.4
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.nvidia.classic.NVDAResmanTesla 8.2.4
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.0d10
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.AppleUSBMultitouch 240.9
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.6
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.CoreStorage 380
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.6
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
com.apple.iokit.IO80211Family 630.35
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBFamily 675.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463531323634485A2D3147314431
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463531323634485A2D3147314431
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.3f10 13477, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HTS725050A9A362, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub
USB Device: iPhone
USB Device: Built-in iSight
USB Device: IR Receiver
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Internal Memory Card Reader
Thunderbolt Bus:
EtreCheck:
Hardware Information:
MacBook Pro (15-inch, Mid 2010)
MacBook Pro - model: MacBookPro6,2
1 2.66 GHz Intel Core i7 CPU: 2 cores
8 GB RAM
Video Information:
Intel HD Graphics - VRAM: 288 MB
NVIDIA GeForce GT 330M - VRAM: 512 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 0:8:28
Disk Information:
Hitachi HTS725050A9A362 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
disk0s2 (disk0s2) <not mounted>: 499.25 GB
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information:
Apple Inc. iPhone
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
Thunderbolt Information:
Configuration files:
/etc/hosts - Count: 7
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[kext loaded] com.Cycling74.driver.Soundflower (1.5.2) Support
[kext loaded] com.avatron.AVExFramebuffer (1.7 - SDK 10.8) Support
[kext loaded] com.avatron.AVExVideo (1.7 - SDK 10.8) Support
[kext loaded] com.splashtop.driver.SRXDisplayCard (1.5 - SDK 10.8) Support
[kext loaded] com.splashtop.driver.SRXFrameBufferConnector (1.5 - SDK 10.8) Support
[not loaded] foo.tap (1.0) Support
[not loaded] foo.tun (1.0) Support
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.barebones.authd.plist Support
[loaded] com.barebones.textwrangler.plist Support
[loaded] com.bitcasa.BitcasaUpdateCheck.plist Support
[running] com.cleverfiles.cfbackd.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.realvnc.vncserver.plist Support
[failed] com.splashtop.streamer.SRServiceDaemon.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.CS5ServiceManager.plist Support
[running] com.amazon.sendtokindle.launcher.plist Support
[failed] com.bitcasa.BitcasaUI.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[loaded] com.realvnc.vncserver.peruser.plist Support
[not loaded] com.realvnc.vncserver.prelogin.plist Support
[failed] com.splashtop.streamer.SRServiceAgent.plist Support
[running] klpr-relay.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[running] com.pando.PMB.plist Support
[failed] com.ruudburger.couchpotatoserver.plist Support
[failed] com.ruudburger.headphones.plist Support
[loaded] com.valvesoftware.steamclean.plist Support
User Login Items:
runapp.command
Dropbox
Alfred 2
Internet Plug-ins:
o1dbrowserplugin: Version: 5.3.0.18358 Support
Default Browser: Version: 537 - SDK 10.9
SlingPlayer: Version: (null) Support
net.juniper.DSSafariExtensions: Version: (null) Support
AdobePDFViewerNPAPI: Version: 10.1.9 Support
FlashPlayer-10.6: Version: 13.0.0.206 - SDK 10.6 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
Flash Player: Version: 13.0.0.206 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
CitrixICAClientPlugIn: Version: 11.4.3 - SDK 10.0 Support
googletalkbrowserplugin: Version: 5.3.0.18358 Support
AdobePDFViewer: Version: 10.1.9 Support
PandoWebPlugin: Version: PandoWebPlugin 2.3.3.8 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.2.1 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 51 Check version
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
Move-Media-Player: Version: npmnqmp 071706000001 Support
3rd Party Preference Panes:
Flash Player Support
Java Support
Perian Support
Time Machine:
Skip System Files: YES - System files not being backed up
Auto backup: YES
Volumes being backed up:
Destinations:
MyBook [Local]
Total size: 2
Total number of backups: 2
Oldest backup: 2012-08-22 09:59:19 +0000
Last backup: 2013-05-08 19:40:47 +0000
Size of backup disk: Excellent
Backup size 2 > (Disk size 0 B X 3)
Time Machine Backups [Local] (Last used)
Total size: 0 B
Total number of backups: (null)
Size of backup disk: Excellent
Backup size 0 B > (Disk size 0 B X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
100% Microsoft Word
3% WindowServer
2% mdworker
2% Google Chrome
0% fontd
Top Processes by Memory:
246 MB iTunes
180 MB Google Chrome
172 MB WindowServer
156 MB com.apple.IconServicesAgent
131 MB Microsoft Word
Virtual Memory Information:
3.54 GB Free RAM
2.59 GB Active RAM
730 MB Inactive RAM
1.15 GB Wired RAM
475 MB Page-ins
0 B Page-outsThe likely culprit:
The problem is likely due to the discreet GPU failing. Download gfxCardStatus 2.3 and use it to disable the GPU. This is a temporary workaround until you get your motherboard replaced.
Possible other causes are the software that installed these:
com.splashtop.driver.SRXFrameBufferConnector 1.5
com.avatron.AVExFramebuffer 1.7
com.splashtop.driver.SRXDisplayCard 1.5
com.avatron.AVExVideo 1.7
Now they may be causing panics because the try to use acceleration in the GPU which leads to the panics. You are unlucky to have a particular model that has a real problem with this. -
I'm looking for some inspiration here on how best to set up my TC
Copied from a post else where, any help greatly appreciated!!
I'm looking for some inspiration here on how best to set up my TC for my needs & wondering how others do for similar needs....
I have a 2TB TC that I have set up so that all of mine & my girlfriends photo's, music, movies & documents are on the one location so that we can access it wirelessly from both our MacBooks & also from a MacMini which I'm going to buy in a month or 2. Changing the location for where iTunes & iPhoto look wasn't a problem but browsing through iPhoto in particular is really slow due to the number of previews I presume, and also we are now unable to have any of the media with us when traveling about, synching phones on the move is a disaster as well!
Anyway,
is there an easy way of setting up iTunes / iPhoto so that we can have all the data on the TC managed on the MacMini but import small iTunes Playlists & iPhoto Albums to our MacBooks without having to change in preferences where the applications look for data each time we get home?
Any help anybody can offer would be grand!
Thanks in advance.........You topic might be better suited for the iPhoto or iTunes forums, since your question seems to be with the application(s) functionality, not really the Time Capsules. However, if you start iPhoto or iTunes while holding down on the "option/alt" key, you can manually select a library to access. When you want one of your computers to access the library on the Time Capsule, make sure it's mounted as a shared volume on your Desktop and then open iTunes and point it towards the library on the Time Capsule. If you want to use a smaller library on your computer, open iTunes and point it to the library on your Mac. I've never switched back and forth multiple times between multiple libraries, so you might check in the iPhoto or iTunes forums to see if any issues may arise from doing this repeatedly.
-Doug -
Im looking for some assistance in configuring our wireles...
Im looking for some assistance in configuring our wireless router to allow remote connections into it.. and then from there access any of the 5 computers on our network. I dont have the model number with me now, but just want to know where to start....
Goal=== to allow me to access our remote locations network and access / vnc into our 5 terminals...
I just need to know how i can configure the router to allow outside connections and then from there connect to our other machines via VNC...
Any suggestions on where to start with this?in order to access the router remotely , you need to enable remote management on the router and to access the terminals using VNC .. you need to open the ports used by VNC ..
Maybe you are looking for
-
Labview VI with Excel toolkit report
In SignalExpress, I have to analyze data and save this analysis in Excel Workbook, to do this, i reuse VI for the analysis, and use Report Generation 1.1.1 toolkit for Office. But an error appear : Error (97): Unknown System Error in Excel_Get_Proper
-
Auto To working for one material and not working for other material
Hi, Hope everybody is doing fine. I have configured the auto TO. Its working fine for one material and not working for the other material. I checked the material master and wm 1,2 views have the same fileds / values. What could be wrong? I didn't set
-
Project Management Vs Project Costing
Hi, Is it true that I have to use Project Management(Project Super User responsibility) to create projects/templates in order to fully utilize Project Management Module(Project Super User responsibility)? Does it matter which responsibility/module yo
-
Nokia Lumia 800 & Nokia music unlimited
Hello! Does Nokia Lumia work with Nokia Music Unlimited? Lumia appears in my Nokia music player ok and I changed my account to Lumia (registere new imei code). But when I try to move music to Lumia, it says my phone is not registered Nokia Music Unli
-
What app do u use to open Microsoft docs on the iphone?
Need assistance on what apps are needed to view Microsoft docs on my iphone.