Batch processing light levels...

I make stop-motion animations using natural light. This results in a “flickering” effect due to the small differences in light in each still. I am able to balance the light levels in Photoshop for each still, but this is very time-consuming. I’ve heard of using Batch processing for multiple images, but I have one question:
Can Batch processing take a number of images and make the light levels the same in each (so that all the images look the same)? Or does it just take a number of images and make the same adjustments to each one (so that they would still look different from eachother)?

Or does it just take a number of images and make the same adjustments to each one (so that they would still look different from eachother)?
How do you adjust the luminance?
Is it done with one of the Auto corrections? Then it should be automatable.
If it requires manual input (for example in the Levels or Curves dialog) then you are looking at a problem (not an undeserved one, I guess, as you chose natural lighting).
Far as I can tell automation of content-dependent corrections basically requires some form of quantifiability of the issue; so if you could for example deduce the necessary correction from the Histogram one should be able to make a Script for the task.

Similar Messages

Apply a Batch Process of Clean Up and Level Voice Over?

I want to apply a batch proces of "Clean Up and Level Voice Over," which is a preset.
However, batch processes can only use "favorites." So I try to create a favorite with the preset.
But this gives me an error, "A new favorite could not be recorded because no supported actions were recorded."
Can this be done? If so, what am I missing or doing wrong? I've read the help on the favorites and I'm following those instructions. I start recording, select the presets, apply, then stop recording and I get the error.
If I just select the presets and don't apply them to a wav file while recording preset, I get the same error, "A new favorite could not be recorded because no supported actions were recorded."
Please advise.
Thanks,
-billb

Hi Bill,
Audition CS 5.5 could record individual effects as favorite operations, but not effects racks. (While I can't discuss what's coming in CS 6 right now, I might suggest that this problem was one that bothered many of us on the team and one that we actively pursued solving early in CS 6 development...)
The workaround I can suggest right now would be to Start Recording a Favorite, then open and apply each effect from the Clean Up and Level Voiceover preset one at a time, with the Default settings.
1. Adaptive Noise Reduction
2. Speech Volume Leveler
3. Hard Limiter
Then Stop Recording the Favorite and it should behave equivalent to the effects rack preset when used in the Batch Process tool.
Durin

Batch Processing in Photoshop 10

Is it possible to batch process .jpegs one stop lighter in Photoshop 10? My picture are of football, but all seem a 1/2 to 1 stop darker than I wanted.

The tweaks possible are limited in elements when using batch processing. You could try auto-levels to see if you like the results.
From the menu in the Editor Use File >> Process Multiple Files.
Select an new destination folder so as not to overwrite the originals in your source folder.

Can we have a Real batch process

The current batch process functionality in Audition records not keystrokes, but settings; so if you record a process using the ClickPop Eliminator functionality under Restoration, you get whatever settings you used with the sound sample you used during the script recording. However, if you want to record a script that uses the very powerful Auto Find All Levels feature of the Click/Pop functionality, you're out of luck (as far as I know).
I'm in the process of cleaning up a bunch of old recordings I have and digitizing them. I can't use the click/pop setting of one for the others! They're just too different, so I've been spending hours waiting while the system samples the current audio and applies the click/pop settings. Can we get a true automation system that let's me record the fact that I want the system to run the Auto Find, then use the results to run the Click/pop eliminator. I could then process hundreds of files while I sleep instead of having to check my computer screen every five minutes and get the next step of the process running!
There are other products with better automation, but they don't do as good a job to reduce noise and eliminate clicks and pops on a wide variety of audio as Audition does. But if you know some that does, please let me know!

Map data with the standard iPhone Maps application is not stored locally on the iPhone. An internet connection is required to download maps data with the Maps application, which would not be effective with a turn by turn voice direction GPS navigation app. Maps data with a standalone GPS navigation device is stored locally on the device.

Getting an error after executing batch process LTRPRT

hi we are testing to check how the flat files are created for different customer contacts,for that we had ran the batch process LTRPRT batch process
it got executed and ended abnormally with an error
these are the parameters which were submitted during batch submission
FILE-PATH=d:\spl
FIELD-DELIM-SW=Y
CNTL-REC-SW=N
This is the following error
ERROR (com.splwg.base.support.batch.GenericCobolBatchProgram) A non-zero code was returned from call to COBOL batch program CIPCLTPB: 2
com.splwg.shared.common.LoggedException: A non-zero code was returned from call to COBOL batch program CIPCLTPB: 2
*     at com.splwg.shared.common.LoggedException.raised(LoggedException.java:65)*
*     at com.splwg.base.support.batch.GenericCobolBatchProgram.callCobolInCobolThread(GenericCobolBatchProgram.java:78)*
*     at com.splwg.base.support.batch.GenericCobolBatchProgram.execute(GenericCobolBatchProgram.java:38)*
*     at com.splwg.base.support.batch.CobolBatchWork$DoExecuteWorkInSession.doBatchWorkInSession(CobolBatchWork.java:81)*
*     at com.splwg.base.support.batch.BatchWorkInSessionExecutable.run(BatchWorkInSessionExecutable.java:56)*
*     at com.splwg.base.support.batch.CobolBatchWork.doExecuteWork(CobolBatchWork.java:54)*
*     at com.splwg.base.support.grid.AbstractGridWork.executeWork(AbstractGridWork.java:69)*
*     at com.splwg.base.support.grid.node.SingleThreadedGrid.addToWorkables(SingleThreadedGrid.java:49)*
*     at com.splwg.base.support.grid.node.AbstractSingleThreadedGrid.processNewWork(AbstractSingleThreadedGrid.java:49)*
*     at com.splwg.base.api.batch.StandaloneExecuter$ProcessNewWorkExecutable.execute(StandaloneExecuter.java:590)*
*     at com.splwg.base.support.context.SessionExecutable.doInNewSession(SessionExecutable.java:38)*
*     at com.splwg.base.api.batch.StandaloneExecuter.submitProcess(StandaloneExecuter.java:188)*
*     at com.splwg.base.api.batch.StandaloneExecuter.runOnGrid(StandaloneExecuter.java:153)*
*     at com.splwg.base.api.batch.StandaloneExecuter.run(StandaloneExecuter.java:137)*
*     at com.splwg.base.api.batch.StandaloneExecuter.main(StandaloneExecuter.java:357)*
*18:24:14,652 [main] ERROR (com.splwg.base.support.grid.node.SingleThreadedGrid) Exception trapped in the highest level of a distributed excecution context.*
what could be the reason?

you need to specify appropriate folder on the server.
for e.g. choose +/spl/sploutput/letterextract/+

Batch processing problems-can anyone help?

Setup: Quadcore, 4GB RAM, 4 internal drives all with plenty of space, Leopard OS, latest version.
Software: CS4 with Photoshop Extended; all updates installed. I also have CS3 installed; only use Bridge and PS in both apps.
Problem: Working in CS4. All edits/crops/corrections done in the Camera Raw window; all edits saved and viewable in Bridge. However, when I use Batch from the Tools dropdown (Tools > Photoshop > Batch), and check all the usual places, select an Action, select a Destination, and hit "Go", the results are totally weird. Some images process as expected, but many are at least two stops overexposed.
All individual files will Open, and can be Saved As manually; all works fine. That is in fact how my assistant and I got the job done tonight. The Batch Action is simplicity itself: Open, Save As (JPEG level 9), and Close file—but if I run Batch on the same files that can be opened and Saved As perfectly, it all goes crazy; three quarters of the files are totally overexposed, in blocks (10–25, roughly), and at random.
I have used the Ctrl + Alt + Shift after opening Bridge; I have run Cocktail; and lit the right incense. But this still will not work properly! Can anyone help???

Batching the same files in CS3 works perfectly, in terms of the processed JPEGs at least being correctly exposed, but the CS4-only edits (like the healing brush) are not recognised, nor are many, tho' not all, of the crops.
I have decided to deactivate and uninstall, then reinstall CS4, after upgrading to Snow Leopard. Usually, I wait for a few months for others to report on OS update interactions with CS and FCP, but since CS4 as installed was useless and I had done the usual resets of Preferences without any change to Batch Processing's reliability, I felt I could not be worse off.
So, after upgrading to Snow Leopard, I will reinstall CS4 (and all apps this time, rather than just PS and Bridge, as I usually do) in case there are soime weird unintended consequences of a Custom install.
Very frustrating and time-consuming, and I wonder what I might have done to create this problem—seeing as no one commented, I can only assume that this is an unique experience.
I will report back today, hopefully.

Reducing file size in batch processes (multiple files)

I am now using a canon XTi 10.5 megapixel camera. I'm loving it, taking tons and pics, and see my memory on my computer shrinking rapidly. I'm not too worried about hard drive space as I can simply buy another hard drive. Where I'm running into problems is on my iPod. I have an 80gb video iPod. It is suddenly full, Almost 1/2 with audio, 1/2 with photos. I'm realizing that I need take the 5-7 megabyte files each (photos) in iPhoto and reduce them down a bit in dimensions and/or jpeg compression.
I use photoshop elements and am familiar with the multiple files option. I've used that a bit, nice feature.
Heres my question:
I know iPhoto is sensitive to manipulation of photos/changes if the changes aren't done through its interface. How can I go about taking the original pics for a number of events (talking about perhaps 2000 pics right now) and batch process them down in size a bit without weirding out iPhoto?
Does iPhoto have an option to batch change files in such a fashion? Is it as simple as finding the originals in the finder and simpy reducing them in size and making iPhoto update its thumbnails?
and how do I make iPhoto update its thumbnails, I forget...
Thanks

If you just want displayable image files on the iPod and not the full sized files then a very good solution, IMO, is to export those photos you want on the iPod to a folder on the Desktop. Then use Resize! to batch change the pixel dimension and the jpg compression level of the files. For my iPod Nano I use 640 x 480 and have Resize! compress them to medium. That gives me files in the 100 KB size range. If you want a smaller file just increase the compressions level a bit. Resize! automatically creates a new folder for the resized images so you can try different levels on the same folder. You can get a lot of photos on your iPod at that size. I then put that folder of resized files in my Pictures folder and have iTunes use it instead of using iPhoto.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

How to create multiple pdf files from multiple batch processing

I have several file folders of jpeg images that I need to convert to separate multi-page pdf files. To give a visual explanation:
Folder 1 (contains 100 jpeg image files) converted to File 1 pdf (100 pages; 1 file)
Folder 2 (contains 100 jpeg image files) converted to File 2 pdf (100 pages; 1 file)
and so on.
I know I can convert each folder's content as a batch process, but I can only figure out how to do so one folder at a time. Is it at all possible to convert multiple folders (containing jpegs) to multiple pdf files? Put differently, does anyone know how to process a batch of folders into multiple (corresponding) pdf files?
Many thanks.

There are two approaches to do this:
- First convert all JPG files to PDF files using a "blank" batch process. Then combine all PDF files in the same folder using another batch process and a folder-level script (to do the actual combining). I have developed this tool in the past and it's available here:
http://try67.blogspot.com/2010/10/acrobat-batch-combine-all-files-in.html
- The othe option is to do everything in a single process, but that requires an application outside of Acrobat, which I'm currently developing.
If you're interested in any of these tools, feel free to contact me personally.

Is there a way to trigger batch process via Applescript or Javascript?

Based on what I've found so far on the internet, the answer is no. The Applescripts I've found so far that attempt to run a batch process don't work for me in either Acrobat Pro 8 or Pro 9.
I've been using Applescript to automate a process that starts in InDesign (create PDFs), then goes to Acrobat to set open options (I've got a batch process for that but can't find a way to trigger it). If I can get that to work, I'll attempt to automate the task of using a Photoshop droplet to create JPEGs of a specific size from these PDFs.
I've settled on InDesign CS3 for creating single-page PDFs from a multiple-page document, partly because I could not find a scriptable way to do this in Acrobat. I know just enough about Applescript to be dangerous. I know much less about Javascript.
Any help would be appreciated.
Thanks,
Kevin Stauffer

Kevin some thing like this for Photoshop should aid you
set Todays_Date to do shell script "date \"+%d-%m-%y\""
-- Create new folder to save to
tell application "Finder"
set Raster_Images to make new folder at desktop with properties ¬
{name:"Rasterized PDF's " & Todays_Date}
end tell
-- Set Photoshop settings
tell application "Adobe Photoshop CS2"
activate
set display dialogs to never
set User_Rulers to ruler units of settings
set ruler units of settings to pixel units
-- set background color to {class:CMYK color, cyan:0, magenta:0, yellow:0, black:0}
-- set foreground color to {class:CMYK color, cyan:0, magenta:0, yellow:0, black:100}
end tell
-- Get list of PDF's
set The_Question to "Do you want to include all the subfolders" & return & "within your folder selection?"
set The_Dialog to display dialog The_Question buttons {"No", "Yes"} default button 1 with icon note
if button returned of The_Dialog is "Yes" then
set Input_Folder to choose folder with prompt "Where is the top level folder of PFD's?" without invisibles
tell application "Finder"
set File_List to (files of entire contents of Input_Folder whose name extension is "pdf")
end tell
else
tell application "Finder"
set Input_Folder to choose folder with prompt "Where is the folder of PFD's?" without invisibles
set File_List to (files of Input_Folder whose name extension is "pdf")
end tell
end if
set File_Count to count of File_List
if File_Count = 0 then
display dialog "This folder contains no PDF files to rasterize!" giving up after 2
end if
-- Loop through the files in list
repeat with This_File in File_List
tell application "Finder"
set The_File to This_File as alias
end tell
-- Tiger (OSX.4) shell call to count the pages
set Page_Count to my PDF_Pages(POSIX path of The_File)
if the result is not false then
-- Loop Photoshop through the page count
repeat with i from 1 to Page_Count
tell application "Adobe Photoshop CS2"
activate
open The_File as PDF with options ¬
{class:PDF open options, bits per channel:eight, constrain proportions:true, crop page:trim box, mode:CMYK, page:i, resolution:300, suppress warnings:true, use antialias:true, use page number:true}
set Doc_Ref to the current document
tell Doc_Ref
flatten
-- Enter your name strings into two enties below
-- Case sensitive stings
-- do action "My Action" from "My Action Set"
-- New file naming options
set Doc_Name to name
set ASTID to AppleScript's text item delimiters
set AppleScript's text item delimiters to " "
set Doc_Name to text items of Doc_Name
set AppleScript's text item delimiters to "_"
set Doc_Name to Doc_Name as string
set AppleScript's text item delimiters to "-"
set Doc_Name to text item 1 of Doc_Name
set AppleScript's text item delimiters to ASTID
if Page_Count = 1 then
set New_File_Name to (Raster_Images as string) & Doc_Name & ".tif"
else
set File_Number to ""
repeat until (length of (File_Number as text)) = (length of (Page_Count as text))
if File_Number = "" then
set File_Number to i
else
set File_Number to "0" & File_Number
end if
end repeat
set New_File_Name to (Raster_Images as string) & Doc_Name & "_" & File_Number & ".tif"
end if
end tell
save Doc_Ref in file New_File_Name as TIFF with options {byte order:Mac OS, embed color profile:false, image compression:LZW, save alpha channels:false, save layers:false}
close current document without saving
end tell
end repeat
end if
end repeat
-- Set ruler units back to user prefs
tell application "Adobe Photoshop CS2"
set ruler units of settings to User_Rulers
end tell
beep 3
-- OSX Tiger shell handler
on PDF_Pages(This_PDF)
try
do shell script "/usr/bin/mdls -name kMDItemNumberOfPages" & space & quoted form of This_PDF & " | /usr/bin/grep -o '[0-9]\\+$'"
on error Error_Message number Error_Number
if Error_Number is 1 then
display alert "Page Count Unavailable" message "The page count for " & This_PDF & " is unavailable." giving up after 3
return false
else
display alert "Error " & Error_Number message Error_Message giving up after 3
return false
end if
end try
end PDF_Pages
and something like this to perform JavaScript from within AppleScript for Acrobat
You would be better talking to the JavaScript Experts on how to use addScript() to get your doc level scripts in.
property Default_Path : (path to desktop folder as Unicode text) as alias
property JavaScript : "var re = /.*\\/|\\.pdf$/ig; var filename = this.path.replace(re,''); try { for (var i = 0; i < this.numPages; i++) this.extractPages( { nStart: i, cPath: filename+'_' + (i+1) +'.pdf' }); } catch (e) { console.println('Aborted: '+e) }" as text
set The_PDF to choose file default location Default_Path ¬
with prompt "Where is the multi-page PDF?" without invisibles
tell application "Adobe Acrobat 7.0 Professional"
activate
open The_PDF
tell active doc
do script JavaScript
close saving yes
end tell
end tell

Batch Processing error: Object variable or With block variable not set - 91

We are experiencing the following error when trying to execute the FDM Batch Processing of files in our UAT environment. This error is not occuring in our DEV environment. I have seen this error before when the data file had been left open and FDM could not access the file, so it appears this error is usually due to file permissions. However, this time none of the files are open, and as far as we can see, FDM should have full access to the OpenBatch and Inbox folders etc.
Does anyone please have any suggestions, particularly on what account FDM will carry out the various tasks? Would it use a system account?
Error:
"Object variable or With block variable not set - 91"
FDM Log:
** Begin FDM Runtime Error Log Entry [2012-07-06 16:07:09] **
ERROR:
Code............................................. 75
Description...................................... Path/File access error
Procedure........................................ clsBatchLoad.fFileCollectionCreate
Component........................................ upsWBatchLoaderDM
Version.......................................... 1112
Thread........................................... 5828
IDENTIFICATION:
User............................................. admin
Computer Name.................................... *******
App Name......................................... *******
Client App....................................... WorkBench
CONNECTION:
Provider......................................... ORAOLEDB.ORACLE
Data Server......................................
Database Name.................................... *******
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... *******
Location ID...................................... 748
Location Seg..................................... 2
Category......................................... *******
Category ID...................................... 14
Period........................................... *******
Period ID........................................ 02/07/2011
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False

I can confirm that there is definitely data present in our data files in this case.
Please note that this error only occurs when using the Batch Processing functionality of FDM Workbench (which requires files to be placed in the OpenBatch subfolder of the Inbox). I can load individual files fine when using the FDM Web Client.
As part of the first step of the batch load process, FDM Workbench moves files from the OpenBatch folder to a new folder which it creates in the Inbox\Batches directory. However, it is not even managing to do this, and gives the error below.
We have tried to share the OpenBatch folder, to allow specific users access to drop files into this folder. Consequently, I believe suggests a security problem on the OpenBatch folder itself (please see original post). I have been told privileges should be sufficient for FDM to make use of this folder too, however I suspect this is not the case at present.
In the meantime, please let me know if this could be due to other causes.

Random Error in Batch Processing

Hi All,
I have a batch process that reads records from DB, pass them to Mediator which calls a BPEL process. During a huge batch processing of 10000 records, we are getting errors in random fashion as under. This error is not specific to a particular record because on the second run with same records exception is seen for some different records. The instance is seen as faulted in the EM console.
####<Jun 2, 2011 9:34:01 AM EDT> <Notice> <Stdout> <dp-esbsit1> <SOAMS2> <weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@7a6bd54e> <<WLS Kernel>> <> <ff1bb8b4974ffa43:-7052aa6c:13047c5dbf0:-7ff1-0000000000004f2a> <1307021641195> <BEA-000000> <<Jun 2, 2011 9:34:01 AM EDT> <Error> <oracle.soa.bpel.system> <BEA-000000> <<BaseCubeSessionBean::logError > Error while invoking bean "cube delivery": could not dispatch message because there is no active transaction.
there is no active transaction while scheduling a message with the dispatcher.
this usually happens if the underlying subsystem rollback back the transaction without bubbling up the system or transaction exception to the bpel layer.
Contact Oracle Support Services. Provide the error message and the exception trace in the log files (with logging level set to debug mode).
ORABPEL-05007
could not dispatch message because there is no active transaction.
there is no active transaction while scheduling a message with the dispatcher.
this usually happens if the underlying subsystem rollback back the transaction without bubbling up the system or transaction exception to the bpel layer.
Contact Oracle Support Services. Provide the error message and the exception trace in the log files (with logging level set to debug mode).
     at com.collaxa.cube.engine.util.EngineBeanCache.getTransactionSynchronizer(EngineBeanCache.java:172)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.dispatchLocal(DispatchHelper.java:424)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.dispatchLocal(DispatchHelper.java:414)
     at com.collaxa.cube.engine.delivery.DeliveryHandler.initialPostAnyType(DeliveryHandler.java:351)
     at com.collaxa.cube.engine.delivery.DeliveryHandler.initialPost(DeliveryHandler.java:249)
     at com.collaxa.cube.engine.delivery.DeliveryHandler.post(DeliveryHandler.java:106)
     at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.post(CubeDeliveryBean.java:683)
     at sun.reflect.GeneratedMethodAccessor986.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at com.bea.core.repackaged.springframework.jee.intercept.MethodInvocationInvocationContext.proceed(MethodInvocationInvocationContext.java:104)
     at oracle.security.jps.ee.ejb.JpsAbsInterceptor$1.run(JpsAbsInterceptor.java:88)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
     at oracle.security.jps.wls.JpsWeblogicEjbInterceptor.runJaasMode(JpsWeblogicEjbInterceptor.java:61)
     at oracle.security.jps.ee.ejb.JpsAbsInterceptor.intercept(JpsAbsInterceptor.java:106)
     at oracle.security.jps.ee.ejb.JpsInterceptor.intercept(JpsInterceptor.java:106)
     at sun.reflect.GeneratedMethodAccessor906.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.jee.intercept.JeeInterceptorInterceptor.invoke(JeeInterceptorInterceptor.java:69)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
     at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
     at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy249.post(Unknown Source)
     at com.collaxa.cube.engine.ejb.impl.bpel.BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.post(BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.java:330)
     at oracle.fabric.CubeServiceEngine.post(CubeServiceEngine.java:560)
     at oracle.integration.platform.blocks.mesh.AsynchronousMessageHandler.doPost(AsynchronousMessageHandler.java:142)
     at oracle.integration.platform.blocks.mesh.MessageRouter.post(MessageRouter.java:194)
     at oracle.integration.platform.blocks.mesh.MeshImpl$3.run(MeshImpl.java:232)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAs(Subject.java:396)
     at oracle.integration.platform.blocks.mesh.MeshImpl.doPostAsSubject(MeshImpl.java:230)
     at oracle.integration.platform.blocks.mesh.MeshImpl.post(MeshImpl.java:212)
     at sun.reflect.GeneratedMethodAccessor985.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:59)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy254.post(Unknown Source)
     at oracle.integration.platform.blocks.direct.DirectEntryBindingComponent.post(DirectEntryBindingComponent.java:281)
     at sun.reflect.GeneratedMethodAccessor1295.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.integration.platform.xapp.WLSContextCrossAppProxy$WLSCrossAppProxy.invoke(WLSContextCrossAppProxy.java:52)
     at $Proxy264.post(Unknown Source)
     at oracle.integration.platform.blocks.direct.SOADirectInvokerBean.post(SOADirectInvokerBean.java:32)
     at oracle.integration.platform.blocks.direct.SOADirectInvokerBean.post(SOADirectInvokerBean.java:50)
     at sun.reflect.GeneratedMethodAccessor1294.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at com.bea.core.repackaged.springframework.jee.intercept.MethodInvocationInvocationContext.proceed(MethodInvocationInvocationContext.java:104)
     at oracle.security.jps.ee.ejb.JpsAbsInterceptor$1.run(JpsAbsInterceptor.java:88)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
     at oracle.security.jps.wls.JpsWeblogicEjbInterceptor.runJaasMode(JpsWeblogicEjbInterceptor.java:61)
     at oracle.security.jps.ee.ejb.JpsAbsInterceptor.intercept(JpsAbsInterceptor.java:106)
     at oracle.security.jps.ee.ejb.JpsInterceptor.intercept(JpsInterceptor.java:106)
     at sun.reflect.GeneratedMethodAccessor906.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.jee.intercept.JeeInterceptorInterceptor.invoke(JeeInterceptorInterceptor.java:69)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
     at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
     at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy312.post(Unknown Source)
     at oracle.integration.platform.blocks.direct.SOADirectInvokerBean_3erlhk_InvokerImpl.post(SOADirectInvokerBean_3erlhk_InvokerImpl.java:57)
     at sun.reflect.GeneratedMethodAccessor1293.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:84)
     at $Proxy311.post(Unknown Source)
     at oracle.soa.api.DirectConnectionImpl.post(DirectConnectionImpl.java:87)
     at oracle.soa.api.CachedConnectionProxy.post(CachedConnectionProxy.java:48)
     at oracle.integration.platform.blocks.direct.OutboundMessageDispatcher.post(OutboundMessageDispatcher.java:114)
     at oracle.integration.platform.blocks.direct.DirectExternalBindingComponent.post(DirectExternalBindingComponent.java:228)
     at oracle.integration.platform.blocks.mesh.AsynchronousMessageHandler.doPost(AsynchronousMessageHandler.java:142)
     at oracle.integration.platform.blocks.mesh.MessageRouter.post(MessageRouter.java:194)
     at oracle.integration.platform.blocks.mesh.MeshImpl.post(MeshImpl.java:215)
     at sun.reflect.GeneratedMethodAccessor985.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:71)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy254.post(Unknown Source)
     at oracle.tip.mediator.serviceEngine.MediatorServiceEngine.post2Mesh(MediatorServiceEngine.java:1133)
     at oracle.tip.mediator.service.BaseActionHandler.requestProcess(BaseActionHandler.java:200)
     at oracle.tip.mediator.service.BaseActionHandler.requestProcess(BaseActionHandler.java:94)
     at oracle.tip.mediator.service.BaseActionHandler.requestProcess(BaseActionHandler.java:74)
     at oracle.tip.mediator.service.OneWayActionHandler.process(OneWayActionHandler.java:47)
     at oracle.tip.mediator.service.ActionProcessor.onMessage(ActionProcessor.java:64)
     at oracle.tip.mediator.dispatch.MessageDispatcher.executeCase(MessageDispatcher.java:140)
     at oracle.tip.mediator.dispatch.InitialMessageDispatcher.processCase(InitialMessageDispatcher.java:495)
     at oracle.tip.mediator.dispatch.InitialMessageDispatcher.processCases(InitialMessageDispatcher.java:393)
     at oracle.tip.mediator.dispatch.InitialMessageDispatcher.processNormalCases(InitialMessageDispatcher.java:276)
     at oracle.tip.mediator.dispatch.InitialMessageDispatcher.processCases(InitialMessageDispatcher.java:250)
     at oracle.tip.mediator.dispatch.InitialMessageDispatcher.dispatch(InitialMessageDispatcher.java:148)
     at oracle.tip.mediator.serviceEngine.MediatorServiceEngine.process(MediatorServiceEngine.java:860)
     at oracle.tip.mediator.serviceEngine.MediatorServiceEngine.post(MediatorServiceEngine.java:631)
     at oracle.integration.platform.blocks.mesh.AsynchronousMessageHandler.doPost(AsynchronousMessageHandler.java:142)
     at oracle.integration.platform.blocks.mesh.MessageRouter.post(MessageRouter.java:194)
     at oracle.integration.platform.blocks.mesh.MeshImpl.post(MeshImpl.java:215)
     at sun.reflect.GeneratedMethodAccessor985.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:59)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy254.post(Unknown Source)
     at oracle.integration.platform.blocks.adapter.fw.jca.mdb.AdapterServiceMDB.onMessage(AdapterServiceMDB.java:606)
     at oracle.tip.adapter.fw.jca.messageinflow.MessageEndpointImpl.onMessage(MessageEndpointImpl.java:462)
     at oracle.tip.adapter.db.InboundWork.onMessageImmediately(InboundWork.java:2008)
     at oracle.tip.adapter.db.InboundWork.onMessageDirectly(InboundWork.java:1957)
     at oracle.tip.adapter.db.InboundWork.onMessage(InboundWork.java:1834)
     at oracle.tip.adapter.db.InboundWork.transactionalUnitDirectly(InboundWork.java:1569)
     at oracle.tip.adapter.db.InboundWork.transactionalUnit(InboundWork.java:1520)
     at oracle.tip.adapter.db.InboundWork.runOnce(InboundWork.java:781)
     at oracle.tip.adapter.db.InboundWork.run(InboundWork.java:581)
     at oracle.tip.adapter.db.inbound.InboundWorkWrapper.run(InboundWorkWrapper.java:43)
     at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
     at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
     at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
>>
####<Jun 2, 2011 9:34:01 AM EDT> <Info> <Common> <dp-esbsit1> <SOAMS2> <[ACTIVE] ExecuteThread: '10' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <BEA1-5270EA105C3EF2ACEB3F> <ff1bb8b4974ffa43:-7052aa6c:13047c5dbf0:-7ff1-0000000000004ed1> <1307021641271> <BEA-000628> <Created "1" resources for pool "SOALocalTxDataSource", out of which "1" are available and "0" are unavailable.>
####<Jun 2, 2011 9:34:01 AM EDT> <Info> <JDBC> <dp-esbsit1> <SOAMS2> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <ff1bb8b4974ffa43:-7052aa6c:13047c5dbf0:-7ff1-0000000000004f2b> <1307021641279> <BEA-001128> <Connection for pool "TFProcessDB" closed.>
####<Jun 2, 2011 9:34:01 AM EDT> <Info> <JDBC> <dp-esbsit1> SOAMS2> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <ff1bb8b4974ffa43:-7052aa6c:13047c5dbf0:-7ff1-0000000000004f2b> <1307021641351> <BEA-001128> <Connection for pool "TFProcessDB" closed.>
####<Jun 2, 2011 9:34:01 AM EDT> <Info> <Common> <dp-esbsit1> <SOAMS2> <weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@6610b103> <<anonymous>> <BEA1-53B3EA105C3EF2ACEB3F> <ff1bb8b4974ffa43:-7052aa6c:13047c5dbf0:-7ff1-0000000000001ef2> <1307021641502> <BEA-000628> <Created "1" resources for pool "SOADataSource", out of which "1" are available and "0" are unavailable.>
####<Jun 2, 2011 9:34:01 AM EDT> <Info> <Common> <dp-esbsit1> <SOAMS2> <weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@6e7a8312> <<anonymous>> <BEA1-53B7EA105C3E> <ff1bb8b4974ffa43:-7052aa6c:13047c5dbf0:-7ff1-0000000000000003> <1307021641504> <BEA-000628> <Created "1" resources for pool "SOADataSource", out of which "1" are available and "0" are unavailable.>
####<Jun 2, 2011 9:34:01 AM EDT> <Info> <Common> <dp-esbsit1> <SOAMS2> <[ACTIVE] ExecuteThread: '14' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <BEA1-53ACEA105C3EF2ACEB3F> <ff1bb8b4974ffa43:-7052aa6c:13047c5dbf0:-7ff1-0000000000004ece> <1307021641512> <BEA-000628> <Created "1" resources for pool "SOADataSource", out of which "1" are available and "0" are unavailable.>
####<Jun 2, 2011 9:34:01 AM EDT> <Info> <Common> <dp-esbsit1> <SOAMS2> <[ACTIVE] ExecuteThread: '8' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <BEA1-53AEEA105C3EF2ACEB3F> <ff1bb8b4974ffa43:-7052aa6c:13047c5dbf0:-7ff1-0000000000004ed0> <1307021641515> <BEA-000628> <Created "1" resources for pool "SOADataSource", out of which "1" are available and "0" are unavailable.>
####<Jun 2, 2011 9:34:01 AM EDT> <Info> <Common> <dp-esbsit1> <SOAMS2> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <BEA1-5294EA105C3EF2ACEB3F> <ff1bb8b4974ffa43:-7052aa6c:13047c5dbf0:-7ff1-0000000000004edc> <1307021641585> <BEA-000628> <Created "1" resources for pool "eis/wls/TFSOAforLoadJMS", out of which "1" are available and "0" are unavailable.>
####<Jun 2, 2011 9:34:01 AM EDT> <Info> <Common> <dp-esbsit1> <SOAMS2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <BEA1-53AFEA105C3EF2ACEB3F> <ff1bb8b4974ffa43:-7052aa6c:13047c5dbf0:-7ff1-0000000000004ed2> <1307021641913> <BEA-000628> <Created "1" resources for pool "eis/wls/TFSOAforLoadJMS", out of which "1" are available and "0" are unavailable.>
####<Jun 2, 2011 9:34:01 AM EDT> <Notice> <StdErr> <dp-esbsit1> <SOAMS2> <weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@7a6bd54e> <<WLS Kernel>> <> <ff1bb8b4974ffa43:-7052aa6c:13047c5dbf0:-7ff1-0000000000004f2d> <1307021641943> <BEA-000000> <Not fatal connection error ... not retrying: class com.collaxa.cube.engine.dispatch.DispatchException: could not dispatch message because there is no active transaction.
there is no active transaction while scheduling a message with the dispatcher.
this usually happens if the underlying subsystem rollback back the transaction without bubbling up the system or transaction exception to the bpel layer.
Contact Oracle Support Services. Provide the error message and the exception trace in the log files (with logging level set to debug mode).>
Caused By: oracle.soa.api.invocation.InvocationException: could not dispatch message because there is no active transaction.
there is no active transaction while scheduling a message with the dispatcher.
this usually happens if the underlying subsystem rollback back the transaction without bubbling up the system or transaction exception to the bpel layer.
Contact Oracle Support Services. Provide the error message and the exception trace in the log files (with logging level set to debug mode).
     at oracle.integration.platform.blocks.direct.SOADirectInvokerBean.handleFabricInvocationException(SOADirectInvokerBean.java:155)
     at oracle.integration.platform.blocks.direct.SOADirectInvokerBean.post(SOADirectInvokerBean.java:63)
     at sun.reflect.GeneratedMethodAccessor1294.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at com.bea.core.repackaged.springframework.jee.intercept.MethodInvocationInvocationContext.proceed(MethodInvocationInvocationContext.java:104)
     at oracle.security.jps.ee.ejb.JpsAbsInterceptor$1.run(JpsAbsInterceptor.java:88)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
     at oracle.security.jps.wls.JpsWeblogicEjbInterceptor.runJaasMode(JpsWeblogicEjbInterceptor.java:61)
     at oracle.security.jps.ee.ejb.JpsAbsInterceptor.intercept(JpsAbsInterceptor.java:106)
     at oracle.security.jps.ee.ejb.JpsInterceptor.intercept(JpsInterceptor.java:106)
     at sun.reflect.GeneratedMethodAccessor906.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.jee.intercept.JeeInterceptorInterceptor.invoke(JeeInterceptorInterceptor.java:69)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
     at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
     at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
>>
####<Jun 2, 2011 9:34:03 AM EDT> <Notice> <Stdout> <dp-esbsit1> <SOAMS2> <weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@7a6bd54e> <<WLS Kernel>> <> <ff1bb8b4974ffa43:-7052aa6c:13047c5dbf0:-7ff1-0000000000004f32> <1307021643170> <BEA-000000> <<Jun 2, 2011 9:34:03 AM EDT> <Error> <oracle.soa.mediator.serviceEngine> <BEA-000000> <Payloads {payload=oracle.xml.parser.v2.XMLElement@5d05be} properties :{tracking.compositeInstanceId=760511, tracking.ecid=0000J1GZnW07IBk_Gx^Ayf1DtL3E000N^1, tracking.conversationId=401%401307021606, tracking.compositeInstanceCreatedTime=Thu Jun 02 09:33:41 EDT 2011, tracking.parentComponentInstanceId=mediator:EE0C9E808D1C11E08F1E1FFA7E86F5E9, MESH_METRICS=null, tracking.parentReferenceId=mediator:EE0C9E808D1C11E08F1E1FFA7E86F5E9:EE163B708D1C11E08F1E1FFA7E86F5E9:oneway}>>
####<Jun 2, 2011 9:34:03 AM EDT> <Notice> <Stdout> <dp-esbsit1> <SOAMS2> <weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@7a6bd54e> <<WLS Kernel>> <> <ff1bb8b4974ffa43:-7052aa6c:13047c5dbf0:-7ff1-0000000000004f33> <1307021643174> <BEA-000000> <<Jun 2, 2011 9:34:03 AM EDT> <Warning> <oracle.soa.mediator.common> <BEA-000000> < Payload after BaseActionHander.requestMessage :{payload=oracle.xml.parser.v2.XMLElement@5d05be}>>
####<Jun 2, 2011 9:34:03 AM EDT> <Notice> <Stdout> <dp-esbsit1> <SOAMS2> <weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@7a6bd54e> <<WLS Kernel>> <> <ff1bb8b4974ffa43:-7052aa6c:13047c5dbf0:-7ff1-0000000000004f34> <1307021643177> <BEA-000000> <<Jun 2, 2011 9:34:03 AM EDT> <Warning> <oracle.soa.mediator.common> <BEA-000000> < Properties after BaseActionHander.requestMessage :{tracking.compositeInstanceId=760511, tracking.ecid=0000J1GZnW07IBk_Gx^Ayf1DtL3E000N^1, tracking.conversationId=401%401307021606, tracking.compositeInstanceCreatedTime=Thu Jun 02 09:33:41 EDT 2011, tracking.parentComponentInstanceId=mediator:EE0C9E808D1C11E08F1E1FFA7E86F5E9, MESH_METRICS=null, tracking.parentReferenceId=mediator:EE0C9E808D1C11E08F1E1FFA7E86F5E9:EE163B708D1C11E08F1E1FFA7E86F5E9:oneway}>>
####<Jun 2, 2011 9:34:03 AM EDT> <Notice> <Stdout> <dp-esbsit1> <SOAMS2> <weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@7a6bd54e> <<WLS Kernel>> <> <ff1bb8b4974ffa43:-7052aa6c:13047c5dbf0:-7ff1-0000000000004f35> <1307021643179> <BEA-000000> <<Jun 2, 2011 9:34:03 AM EDT> <Warning> <oracle.soa.mediator.common> <BEA-000000> < Headers after BaseActionHander.requestMessage :[oracle.xml.parser.v2.XMLElement@413e12a2, oracle.xml.parser.v2.XMLElement@6e84c28d]>>
####<Jun 2, 2011 9:34:03 AM EDT> <Notice> <Stdout> <dp-esbsit1> <SOAMS2> <weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@7a6bd54e> <<WLS Kernel>> <> <ff1bb8b4974ffa43:-7052aa6c:13047c5dbf0:-7ff1-0000000000004f36> <1307021643301> <BEA-000000> <<Jun 2, 2011 9:34:03 AM EDT> <Error> <oracle.soa.mediator.service> <BEA-000000> <re-throwing the received exception oracle.fabric.common.FabricInvocationException: oracle.soa.api.invocation.InvocationException: could not dispatch message because there is no active transaction.
there is no active transaction while scheduling a message with the dispatcher.
this usually happens if the underlying subsystem rollback back the transaction without bubbling up the system or transaction exception to the bpel layer.
Thanks for your help
Regards,
-NJ

did you check the Error "Failed to serialize the DOM element" during dehydration
hth

Batch Process for creating button sets in Fireworks - help

Hi,
I'm new to Fireworks still, I've created some really simple
buttons and I was wondering if it's possible to do a batch process
on them to repeat a few steps e.g. changing background colour,
border colour, text colour etc... It would save me lots of time and
I could make some extra sets then.
Thanks,
Rob

Actually Find and Replace will go through a directory as
well.
alex
PJR wrote:
> "sanchothefat" <[email protected]>
wrote in message
> news:ee8qm0$1pm$[email protected]..
> | Thanks Peter!
> |
> | You're a real hero, nice one
>
> Not sure about that! I'm struggling with this.
>
> I would set about this in a different fashion
>
> I would open a canvas say 600x600 and import all your
buttons onto the
> canvas.
> Organize them in a way that makes sense to you. You can
duplicate each set
> and alter the colours in several ways. In my example
>
http://www.fasterthanu.com/rob.html
I used Adjust Colour > Levels with just
> the backgrounds selected.
>
> Sorry I couldn't be more help
>
> Peter
>
>

HDR Toning Auto Batch Process

Hi, first time poster here...just recently got into timelapse photography and have been batch processing away to my hearts content. I have one scene that looks unbelievable with the "surrealistic" HDR toning preset. However, I record my action and set up the folders and set it to go, but it seems to want me to click "ok" after filtering each photo...there's 1685 of them, so not very keen on that.
I googled it before posting here and there is one other post online about it, but they start talking about scripts and I have no idea where they are or what to do with them...
Any advice? Many thanks.
Win 8/ CS6.

Cecilstar wrote:
Hi,
I'd like to batch process a sequence of 830 photos. I basically want to make two copies of each - one with less exposure (darker) and one with more (lighter) so at the end I'll have 2490 images (in separate projects).
No reason I know this can't be done. Lift and stamp adjustment.
Incidentally, something I've noticed is that when selecting one photo for adjustments it automatically duplicates the photo alongside the original, I'd like to temporarily disable this so I can select all the photos in one project and adjust them as one so they all turn out the same.
Aperture→Prefs→Advanced→{uncheck "Create new versions when making adjustments"}.
In case you haven't guessed already it's for an HDR time lapse film I'm making. I'll then be taking the images to photomatix for more processing - a whole other forum to visit then...
What's the subject? I'd like to see the film.
Any ideas?
Thanks.

Digital Signature automatically inserted for batch processing

hey guys... hope you can shed some light...
Is it possible to generate a non-interactive form with a digital signature already in-place?
We're generating invoices in batch processing and need to have a digital signature in place when we email the PDF to our vendor. The digital signature will always be the same.
I did see this in the LCD help:
"You can use Adobe document services to sign a document, validate a
signature, select the collection of objects to lock, or certify a PDF
document programmatically. This workflow is ideal when a large number
of documents require a signature because they can be signed in a batch
process.
To sign PDF documents in Adobe document services, configure the web
service for secure access using the secure sockets layer (SSL). For
details about this configuration, see the Adobe document services
Configuration documentation."
I have a link to the older ADS config document [-Here-|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30a9630b-4f89-2a10-6fab-e311b3ffd9a6] and am in the process of looking through it.
However, has anyone done something like this already?

Otto,
thanks!
I hadn't checked out the demo - i didn't even know there was a demo program provided . BTW, it's FP_TEST_07.
I do believe you're correct that it needs to be an interactive form - that wont be an issue for us.
There is some documentation floating around that we're trying to piece together - we have our Basis team configuring the ADS for SSL connections.
From what I've seen, I think we have to store our signature in the ADS and attach it at run time.
Too many moving parts - I don't like it when I have to get more than 1 group involved to complete a develoment item.
I'll keep this thread updated as we progress.

Records aren't updated in batch processing when an error occurs

Hi folks,
We are facing a problem using batch processing with oracle. Our app is implemented without any framework (Struts, Hibernate, Spring, etc), using basic statements and the "auto commit" option is turned off.
When there's no errors into statements, everything goes fine! But, when one of commands doesn't execute succesfully, we can't commit others statements. Although specs say all of the previous statements should be committed when we explicit commit the transaction.
Does anyone have any idea about the source of this problem?
Thanks,
Auler.

Well, last time I checked, this was NOT a database forum, it's a "SQL and PL/SQL" forum, isn't it? Yes, SQL and PL/SQL run on the database, but they also run at the application level as well when you're working with Oracle Forms and Reports, which both have a built in PL/SQL engine.
And yes, I AM using RUN_PRODUCT...*before* I use the win_api_session call. I run the report, and THEN attempt to open the finished report once it has been written to file. But I can't do that if the report is still being generated, right? My RUN_PRODUCT call passes a parameter to tell it to close the Reports Background Engine once the report has been generated. So, what I do is test (using win_api_session) to see if the Reports Background Engine is open or not. WHILE (my loop here...see my last post) it's open, I loop, so that when it is no longer open, I know that my report has been generated, and I can make the call to attempt to open the report from file.
Again, what I need to do, is figure out how I can put some sort of error handling inside my loop to handle situations where there may be some sort of error in generating the report, and the Reports Background Engine doesn't get closed, which would leave me stuck in the loop.

Batch processing light levels...

Similar Messages

Maybe you are looking for