Batch Updation with new Batch via IDoc

Hi,
Is it possible to update the existing batch at the delivery level with the new batch from the IDoc during the Picking or PGI
I checked the FM WS_DELVRY_UPDATE2 which is not allowing to do this...
Any pointers on this will be helpful
Any Clue on the above issue ?
Thanks in Advance
Rajesh
Edited by: Rajesh on Mar 6, 2012 8:39 PM

Possibly, have a look at OSS 748216.
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=748216
Regards,
Nick

Similar Messages

Why is my address book no longer being automatically updated with new entries?

why is my MacBook Pro address book no longer being automatically updated with new entries?
thanks!
Joe

thanks for the question!
i have an iphone that uses addresses/contacts. i don't use icloud because i was getting doubled calendar entries.
updating is done "via itunes on this computer"

I have recently updated the new apps via creative cloud now photoshop and bridge no longer work, they open then say they have encountered a problem and close, I also tried opening the old version of photo shop but getting the same result

I have recently updated the new apps via creative cloud now photoshop and bridge no longer work, they open then say they have encountered a problem and close, I also tried opening the old version of photo shop but getting the same result

What OS version? What's the exact error? Exactly when does the error occur? What previous versions? What is on the screen when the error displays? Does Photoshop get fully open?
Try opening Photoshop holding down Shift key immediately to turn off plug-ins. Lots of good suggestions here: Photoshop: Basic Troubleshooting steps to fix most issues

A serious problem with JTable to update with new data.

I am customizing a JTable. In the table 3 rows and row wise same data presents. After every 30 sec table will be update with new data. But a exception is coming like: ArrayIndexOutofBound 4>=0. Exception is not coming so frequently some time it comes within 1 min or after 1 hour of program running and each time *4>=0* is varies with different number.
Here is the model i am using and to update table i am calling setTableData( ) with updated vector as a argument.
public class MyModel extends AbstractTableModel {
          protected Vector m_vector;
          public MyModel(Vector m_vector) {     this.m_vector = m_vector;     }
          public int getColumnCount() {
               return m_vector==null ? 0 : m_vector.size();
          public int getRowCount() {     return 3;          }
          public String getColumnName(int col) {     return null;     }
          public Object getValueAt(int row, int col) {
                   if (col < 0 || col>=getColumnCount())
                  return null;
              try{
              MyData column = (MyData)m_vector.elementAt(col);
              switch (row) {
                  case 0: return column.gate;
                  case 1: return column.time;
                  case 2: return column.status;
              }}catch(Exception e){
                    System.out.println("Error is here");
                    e.printStackTrace();
              return null;
          public Class getColumnClass(int c) {return getValueAt(0, c).getClass();     }
          public boolean isCellEditable(int row, int col) {
               if (row == 1) { return false; } else { return true; }
          public void setTableData( Vector mData)
                     this.m_vector = new Vector(mData);
                     fireTableStructureChanged();
     }Please help me out.

This is the exception:
java.lang.ArrayIndexOutOfBoundsException: 4 >= 3
     at java.util.Vector.elementAt(Vector.java:431)
     at javax.swing.table.DefaultTableColumnModel.getColumn(DefaultTableColumnModel.java:277)
     at javax.swing.plaf.basic.BasicTableUI.paintCells(BasicTableUI.java:1047)
     at javax.swing.plaf.basic.BasicTableUI.paint(BasicTableUI.java:974)
     at javax.swing.plaf.ComponentUI.update(ComponentUI.java:142)
     at javax.swing.JComponent.paintComponent(JComponent.java:541)
     at javax.swing.JComponent.paint(JComponent.java:808)
     at javax.swing.JComponent.paintChildren(JComponent.java:647)
     at javax.swing.JComponent.paint(JComponent.java:817)
     at javax.swing.JViewport.paint(JViewport.java:722)
     at javax.swing.JComponent.paintChildren(JComponent.java:647)
     at javax.swing.JComponent.paint(JComponent.java:817)
     at javax.swing.JComponent.paintWithOffscreenBuffer(JComponent.java:4787)
     at javax.swing.JComponent.paintDoubleBuffered(JComponent.java:4740)
     at javax.swing.JComponent._paintImmediately(JComponent.java:4685)
     at javax.swing.JComponent.paintImmediately(JComponent.java:4488)
     at javax.swing.RepaintManager.paintDirtyRegions(RepaintManager.java:410)
     at javax.swing.SystemEventQueueUtilities$ComponentWorkRequest.run(SystemEventQueueUtilities.java:117)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)and Column may increase/decrease depending upon data retrieved.

Does iTunes Connect Christmas break mean apps won't update with new folios over Christmas?

I have 2 folios that are due to be released to my app this Christmas - both fall within the 22nd-29th window iTunes have chosen to close down.
So even though I can publish my folios through DPS over Christmas and pre-plan my app description in iTunes accordingly - before the 22nd - will those published folios not appear in my app?
Thanks.

You mean updating a paid folio... don't know if that needs approving, too.
Maybe someone else can chime in here (I have no exp in that)
(mobil gesendet)
Am 16.12.2011 10:05 schrieb "jamie.dunmore" <[email protected]>:
Re: Does iTunes Connect Christmas break mean apps won't update with
new folios over Christmas? created by jamie.dunmore<http://forums.adobe.com/people/jamie.dunmore>in
Digital Publishing Suite - View the full discussion<http://forums.adobe.com/message/4088490#4088490>

IPhone 4 - tried updating with new software and now it's asking me to plug it to iTunes. The problem is that my laptop is dead. Is there anything I can do now? Thank you for help!

iPhone 4 - tried updating with new software and now it's asking me to plug it to iTunes. The problem is that my laptop is dead. Is there anything I can do now?
I Don't know if I can turn it of or do I just leave it and take it to service?
I'd appreciate some advice!

Same thing happened here ~ tech guy at a local authorized Apple repair store said it had something to do with improper backup from which the restore would be made. Still have a phone that asks to be connected to Itunes but won't do anything else . . . frustrated.

Have mac mini with thunderbolt monitor 1yr old, recently updated with new 10.0.2 from apple, now iMovie doesn't seem to support my Sony HDR-XR500 camera. Is there any help on this?

Have mac mini with thunderbolt monitor 1yr old, recently updated with new 10.0.2 from apple, now iMovie doesn't seem to support my Sony HDR-XR500 camera. Is there any help on this?

haha, so now i'm thinking. I'm learning the terminal as fast as i can but there are several lines of codes and commands in there that throws up red flags to me that i don't fully understand. It just looks fishy too me. It would be highly appreciated if someone could just check this out just to tell me that i don't need to worry about it. Or point me in the right direction. I just feel un easy about this. ha.

HT203216 iPhone will not update with new outlook calendar events after sync

iPhone 4S will no longer update with new outlook calendar events after sync

another user had the fix:
FIXED IT! After a painful and time-consuming couple of months.
I found the solution on another help forum, and in a nutshell it is this:
I had set up some Outlook appointments with a reminder set at "0" minutes i.e. to remind me at the time of the event.
On the iPhone there isn't an option for "0" minutes - instead it says 'at the time of the event' (or something similar)
When the iphone tried to sync the Outlook items it didn't know what to do, and after several minutes of 'deliberating' (which looked like a very long calendar sync in iTunes) it then just aborted the process without syncing anything on Calendar.
So I went into calendar list view, and changed any appointment with a reminder set to "0" minutes, and bingo, it all started working again.
Try it! I hope it works for others too.. (repost of solution provided by Silvermum)

How do I sort out 'Apple ID disabled for security reasons' after I had my old Email address and password erased but still showing ?? now I can't access my apple store Apps updates with new email address and password??

How do I sort out 'Apple ID disabled for security reasons' after I had my old Email address and password erased but still showing ?? now I can't access my apple store Apps updates with new email address and password??

You might try contacting App Store Support: http://www.apple.com/support/mac/app-store/

Very excited about the new update - Thanks Apple for the keyboard update with new emojis! But why are there no ethnicity options for the families?

Very excited about the new update - Thanks Apple for the keyboard update with new emojis! But why are there no ethnicity options for the families?

D.p.middleton the Adobe Application Manager has been available for quite some time. It not only allows Creative Cloud users to install their applications but also downloads and applies applicable updates. In addition it is also responsible for the licensing and managing your agreement to the terms and conditions of the EULA.
2. this could be due to you selecting a trial subscription to the Creative Cloud? If you go to one of the Adobe Creative products and select Help>Updates it will launch the update portion of the Adobe Application Manager which I believe is the portion you are looking for?
#3 I believe this was already mostly covered in the answer to #2.
#4 the Adobe Application Manager also receives periodic updates which affects both perpetual and Creative Cloud subscription users.
I hope this provides you many of the answers you are looking for? If not please feel free to respond back with any additional inquiries which you have. Also if you are experiencing any difficulties with the update process please post this as well. It may not be necessary to have a full understanding of the inner workings of the Adobe Application Manager to help you resolve your difficulties.

I downloaded pages with an old account. How do I update with new account?

I downloaded pages with an old account. How do I update with new account?

Which Pages did you download with the old account? Which update are you thinking about?
For updating you usually have to use the same account.

IPhone 4 will not update with new software

I can't get my iPhone 4 to update with the new software. I keep getting an error message that says there is a promblem downloading the software and the network connection timed out. Make sure the network settings are correct and your network connection is active. I reset my network connection, which did nothing to help. What next?

try to restore....its the same as update.....i did that and worked prefect........make sure to back up all your files!!!!

Open PO did not get updated with new price.

A mass price change was updated in SAP for one of the supplier . All open orders did not get updated with this new prices.
Can anyone tell me the reason why ?
-Amol

hi
i think u have to do it manually
logically if u see u can use diffrent prices in diff po
if ur price is inr 100 in 1st po and u done gr ur rice will get updated in mm suppose it is 105
next time u create the po of 110 rs and done gr
suppose ur price updated is 108 rs inmm
so it is not happening that 108 is get updated in ur 1st po
right so i think u have to update pos manually
if i am wrong plz let me know
regards
kunal

Xth data - updated with new records in exit- layout does not show new recor

Hi ,
I have updated Xth_data table in an exit function with new set of records. I can in debug mode in the exit function 204 records in Xth_data and after the logic 408 records. But somehow , when the layout comes up , it comes up with only 204 records instead of 408. I have populated all the key fields of xh_data with characteristic value. But still these are missing in the layout. Please let me now if you guys have come across simillar situation.
204 records are read , 0 of them were changed, 276 generated.
Thanks
JC

Hi,
Surely that the new record do not match with the selection of your package.
You should execute the function withj the trace, so you can access the full log.
Regards

Why is iTunes store not updating with new episodes

I've followed all the rules and have successfully updated with 18 episodes. Now, the past two episodes have been posted and while they show up if one is already subscribed to the RSS feed the newest episodes are not appearing on the podcast page in the iTunes store. Anyone else experience this frustrating problem? Suggested solutions other that removing the feed and resubmitting? Thanks, in advance, for your help!

I am having the same issue. I know what the issues are in the feed validator, but I put them there for use in the xml side of our site. I don't see why there would be an issue.
I have a category channel element added which gives each episode its own tag which I call for on our website. If you have time, can you please check if these issues need to be resolved?
http://www.null.jo/rss/rss.xml
I also have a new rss feed I want it to update to and it just isn't doing it. Thanks a lot.
Yazan

Lightroom 5: After paste settings photo is not updated with new settings applied (sometimes)

Hi all,
anyone have seen same bug as me? When I copy develop settings with CTRL+SHIFT+C and then paste it to another photo with CTRL+SHIFT+V, sometimes the photo is not updated/rendered with new settings applied -> and yes, I see "paste settings" step in photo "history window". So when I press Undo and then Redo key, photo will render updated.
I did try to reinstall LR 5 and optimize catalogue, problem is still there.
(Win 7 x64, latest LR 5.6)

Yes, I have similar problems. I'm guessing it's down to file size: With NEFs from my old D70 (5MB average) there was no problem, but with D610 files (30MB average) I'm getting a few problems, including 'not pasting settings'.
LR seems to struggle with larger files. Don't have a solution, unfortunately.

Batch Updation with new Batch via IDoc

Similar Messages

Maybe you are looking for