Batching of multiple IDOCs into 1 IDOC-XML file

Hi PI experts,
I would like to send all idocs from the same payment run (based on run date & run id) as 1 idoc-xml file to PI.
The number of idocs is variable depending on the payment run.
Is this possible without using ccBPM?
I understand it can be achieved according to /people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm by using FILE adapter. But I don't want to save the idocs into a file system and the number of records in a file is also fixed.
Is there other alternative solution?
Thanks,
Ken.

Hi Michal,
Yes, I have seen your blog and also would like to use the IDoc packaging feature which comes with 7.0 EHP1 onwards, but I am not sure whether the IDoc collecting can be based on the payment run date and run id.
The sending of the collected IDocs is based on when the program RSEOUT00 is executed.
If we perform 2 separate payment runs before the RSEOUT00 is executed, would PI receive 2 Idoc-XML files or 1 combined Idoc-XML file. We would like to receive 2 separate XML files.
Hope you can confirm this.
Thanks.

Similar Messages

Merging multiple idocs into 1 XML output

Hi Gurus,
I've got a scenario whereby i will need to send payment documents via idocs to XI and XI will output them into an XML file.
At the moment, when i perform a payment run for multiple vendors and send the idocs out, i realised that multiple idocs are being sent out and XI will output multiple XML docs.
Is there any way i can merged these idocs into a single XML document? The idocs are all from the same system.
Thanks in advance.

HI,
I think this is possible using PACKAGING.
Check this note 814393 on Service Market Place.
You want to create or process an XI message with multiple instances of an IDoc (of the same IDoc or extension type) in the mapping.
Please refer below link to follow the steps to Merge IDOCs under single XML,
SAP Network Blog: Collecting IDocs without using BPM
Collecting IDocs without using BPM
IDoc packaging
Reason and Prerequisites
The relevant IDoc is imported into the Integration Repository.
Solution
1) Log on to the Integration Repository.
2) Open the relevant IDoc in the object editor.
3) Select the "Export XSD" menu option in the "Tools" menu.
4) In the subsequent dialog box, assign a file name and save the data to the hard disk of your local PC.
5) Open the file that you have saved in step 4 in an adequate editor (for example, Notepad) for editing.
6) Locate the first entry: <xsd:element name="IDOC" type="<
Idocname>"> and add the following expression, maxOccurs="unbounded", between the value of the type attribute and the closing angular bracket.
Example:
<xsd:element name="IDOC" type="ADR2MAS.ADR2MAS02"
maxOccurs="unbounded">
7) Save the modified file to the hard disk of your local PC.
8) In the message mapping, use the file saved in step 7 instead of the imported IDoc by using the "Import XML or XSD" function in the mapping tool to select the source or target messages.
Thnaks
swarup

TCODE TO DOWNLOAD IDOC INTO A FLAT FILE

Hi All,
Please let me know if there is any tcode to download IDOC into a flat file..
Regards,
Kaveri

try with we60 where you should have links to download the idoc type.
Please check this:
1. How to Download a Hierarchy to a Flat File
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0403a990-0201-0010-38b3-e1fc442848cb
2. How To Convert an IDoc-XML structure to a flat file and vice versa in XI 3.0 Version 1.10
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
run the report RSEOUT00 with the idoc number, flat xml file will be generated at the location user/sap/XI/SYS/global/idoc_file
Please rewrds if found help ful

IDOC-- PI-- flat xml file

Hi ,
we are working on a HR IDOC>PI>flat xml file scenario.
Idoc name is HRMD_A07.
we have consolidated some 10 interfaces together.
Plan is to,
1)(master interface) get the idoc data into a flat xml file, where flat xml consists of unique fields of all 10 interfaces.
2)Later, use flat xml as input to 10 interfaces, which are FILE>PI>FILE.
we are facing problem in master interface. The data is not coming properly in flat xml.
Can you guys suggest the proper way to do this.
should we use,
1)abap mapping, with standard functionality to convert idoc to flat file?
2)write a udf to get the proper data?
pls suggest the best approach.
san.

Hi San,
you gave us nearly no details, so it is hard to give you any recommandation.
PI provides 4 general possibilities for mappings:
Graphical: Standard and for simple cases the best solution
XSL: Webstandard, in some cases much less development time compare to graphical (if the message structure changes)
ABAP: For special cases (access to ABAP tables, operations before parsing)
Java: For special cases
Regards,
Udo

Problems with mapping after bundling messages into one XML-file

Hi all,
Case 1: one DebMas IDoc ==> XI ==> one XML-file : no problems with mapping.
Case 2: several DebMas IDoc's ==> XI ==> one XML-file : problems with mapping.
Explanation:
Incoming DebMas IDoc's:
Businesspartner 1 : no Customer Master Partner Functions (E1KNVPM).
Businesspartner 2 : Customer Master Partner Functions (E1KNVPM).
Businesspartner 3 : Customer Master Partner Functions (E1KNVPM).
Businesspartner 4 : Customer Master Partner Functions (E1KNVPM).
After bundling into one XML-file:
Businesspartner 1 : no Customer Master Partner Functions (E1KNVPM).
Businesspartner 2 : no Customer Master Partner Functions (E1KNVPM) !!!!
Businesspartner 3 : Customer Master Partner Functions of Bp 2 (E1KNVPM) !!!!.
Businesspartner 4 : Customer Master Partner Functions of Bp 3 (E1KNVPM) !!!!.
All the payloads of the IDoc's are correct.
In the message mapping we use a Container for the Partner Functions (shown as below)
Is this a serious bug in the mapping of SAP XI ?
Does anyone knows how to solve this serious problem.
E1KNVVM -
> Partner_Container
E1KNVPM -
> Partner
PARVW -
> ParnerRole
KUNN2 -
> PartnerNumber
Regards,
Theo Pijlman

Hi,
Example:
Input idoc has field F1 with occurence 0..unbnd
My input values for field F1 is
1
none
2
3
Say, I have a mapping, F1---->TargetF1
In the target only 3 TargetF1s will be created for the values 1,2,3 and nothing will be created for the field F1 with no value.
To overcome this, use collapse contexts.
F1->collapsecontexts>TargetF1
This way, the TargetF1 fields created will have the following values:
1
blank
2
3
Collapse contexts makes sure that a target is created, even if there is a context change specified at the source.
Hope this is clear.
Regards,
Smitha.

How to write input data into an xml file

Hi All,
I have some input data and i have to write it
into an xml file.How is it possible send me some related
links regarding this and source code if any.

Hi
Try to go through these links.I hope this will help you to solve your problem.
http://www.xml.com/pub/a/2003/07/09/udell.html
Thanks
Mrutyunjaya Tripathy

How to print an excel file (2010 version) with multiple tabs into a pdf file with bookmarks (acrobat 9). I was able to do this easily using excel (2007 version).

Recently I got a new laptop, with excel 2010 version and acrobat 9 standard.
I could no longer print (save as) an excel file with multiple tabs into a pdf file with bookmarks.
My old computer has excel 2007 version and acrobat 9 standard.
Print an excel file into pdf with bookmarks was a piece of cake.
Both machine has the same add-in -- Acrobat PDFMaker Office COM addin
Thanks if anyone could help me with this.
Tom

You need to upgrade Acrobat to a newer version.
On Thu, Oct 30, 2014 at 4:12 PM, excel-pdf-bookmarks <

How do I scan multiple pages into one pdf file using the PIXMA MG7520 on Windows 8.0? Please help!

I recently received a PIXMA MG7520 for a gift. It works great with my lenovo laptop/tablet running on Windos 8.0. The one drawback to the HP all-in-one that it replaced is it does not have an ADF. That being said, there must be some way to scan multiple pages into one pdf file. I need help figuring thing out. Thanks in advance!
Solved!
Go to Solution.

Hi mdtolbert54,
There is a program that comes with the printer called the IJ Scan Utility that can assist you with scanning multiple pages into a single PDF document. To do this, please follow these steps:
1. On your keyboard, press the Windows key.
2. Start typing IJ SCAN UTILITY. The search window opens as you type. Once the IJ SCAN UTILITY is displayed, please select and open it.
3. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears.
4. Click the DOCUMENT SCAN option on the left pane of the window.
5. In the SAVE SETTINGS section of the window, you will select the save format and location of the document you are about to scan.
a.) In the FILE NAME field, specify the name you would like to give the file. By default the filename will begin with IMG; you can remove IMG and change it to whatever you would like to name the file.
b.) In the DATA FORMAT field, use the drop-down arrow to select the PDF (Multiple Pages) option.
c.) In the SAVE IN field, please navigate to the area where you would like the file to be saved once it is scanned in. By default, the file will be saved in the MY DOCUMENTS folder.
6. Once all settings have been selected, click the OK button at the bottom of the window to save the changes. The IJ Scan Utility main screen appears.
7. Click the DOCUMENT button. Scanning starts. Click the CANCEL button to cancel scanning if needed. Scanned items are saved in previously selected folder location specified in the SETTINGS... window.
If you find that you need advanced scanning options such as adjusting resolution, brightness, contrast, saturation, color balance, etc. in addition to the options selected above, please click on the SCANGEAR button on the IJ Scan Utility Main screen, then adjust the items as necessary.
Once the items above are set for document scanning, in the future, you will only need to launch the IJ Scan Utility, then press the DOCUMENT button to perform the scan (unless you want to make changes to the settings).
Hope this helps!
This didn't answer your question or issue? Please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How do i scan multiple pages into one pdf file

How do I scan multiple pages into one pdf file?

That depends on your scanning software. Adobe Reader doesn't scan.

How to export special characters into an XML file?

Dear experts,
We read files from our customers and save data into our customized table without any character changed, including some address fields. In those address fields, some special characters (not in our code page) are also kept. When we want to write these address fields into an XML file or flat file, the special charcters become "##" or not readable, can anyone help us to solve this issue?
Question1: How to write special code to an external file?
Question2: how to use 'CALL TRANSFORMATION' from an internal table to an XML file?
Your answer is highly appreciated!
Joanne

Hi Joanne.
Please check the below link.
CALL TRANSFORMATION
Before that u have to create one transformation program in STRANS tcode for using it in call transformation statement.
Hope it will be useful.
Regards,
Lakshman

How to read XML file and write into another XML file

Hi all, I am new to JAVAXML.
My problem is I have to read one XML file and take some Nodes from that and write these nodes into another XML file...
I solved, how to read XML file
But I don't know how to Write nodes into another XML.
Can anyone help in this???
Thanks in advance..

This was answered a bit ago. There was a thread called "XML Mergine" that started on Sept 14th. It has a lot of information about what it takes to copy nodes from one XML Document object into another.
Dave Patterson

Export multiple tables into one flat file

I have data in multiple tables on a processing database that I need to move up to a production database. I want to export the data into a flat file, ftp it to the production server and have another job pick up the file and process it. I am looking for
design suggestions on how to get multiple tables into one flat file using SSIS?
Thank You.

Hey,
Without a bit more detail, as per Russels response, its difficult to give an exact recommendation.
Essentially, you would first add a data flow task to your control flow. Create a source per table, then direct the output of each into an union all task. The output from the union all task would then be directed to a flat file destination.
Within the union all task you can map the various input columns into the appropriate outputs.
If the sources are different, it would probably be easiest to add a derived column task in-between the source and the union all, adding columns as appropriate and setting a default value that can be easily identified later (again depending on your requirements).
Hope that helps,
Jamie

How to convert text values acceses from jsp page into an xml file?

/* this is the jsp page which i want to convert it into an xml file
please help me , i thank in advance*/
<html>
<head>
<title> xml test</title>
</head>
<body>
<form action="testxml2.jsp" method = post>
<ul>
<li>
<ul>NAME:
<br>
<li>First Name:<INPUT NAME="firstName" TYPE=text SIZE=20><br>
<li>Middle Name:<INPUT NAME="middlename" TYPE=text SIZE=20><br>
<li>Last Name:<INPUT NAME="lastname" TYPE=text SIZE=20><br>
<li>t Name:<INPUT NAME="tname" TYPE=text SIZE=20><br>
</ul>
<br>
<ul>Role:</b><p><input type="radio" name="role" value="buyer">Buyer<p>
<input type="radio" name="role" value="seller">Seller<p>
<input type="radio" name="role" value="thirdparty">Third Party<p>
</ul>
<ul>
Qualification:<br>
<li>Highest Degree:<INPUT NAME="degree" TYPE=text SIZE=20><br>
<li>Percentage: <INPUT NAME="percentage" TYPE=text SIZE=20><br>
</ul>
<ul> Adress:
<li> streetName:<INPUT NAME="street" TYPE=text SIZE=20><br>
<li>cityName:<INPUT NAME="city" TYPE=text SIZE=20><br>
<li>StateName:<INPUT NAME="state" TYPE=text SIZE=20><br>
</ul>
</ul>
<b>
<INPUT TYPE=SUBMIT VALUE="ENTER" >
</body>
</html>

hi there,
In the MCV there is a part about struts, this is a descent way to do this.
how to do it:
create an actionform containing all the properties of the page.
then when you submit your form use an method in the actionforms (that you have written) that makes sets your data in a xml file.
this works very quickely and i use it in production...
you can choose if you want the xml to generaded hard coded or via a parser.
greetings

Is there any script or batch program that can pick a xml file...

Hi,
Is there any script or batch program that can pick a .xml file from a folder and place it in a different folder on the same directory periodically without using an XI interface.
Thanks,
np

Hi Nadini,
Please refer below link for how to sechdule a batch file.
[Schedule Batch File-How to?|http://www.tech-archive.net/Archive/WinXP/microsoft.public.windowsxp.general/2006-04/msg01349.html]
And please refer below links for how to write a batch file and other one as batch file commands.
http://www.wikihow.com/Write-a-Batch-File
http://www.aumha.org/a/batches.php
these two links was a click away in google :).
regards
Aashish Sinha

How can I generate IDOC(WPUUMS) from XML file in POSDM or in SAP Retail

Hallo Retail expert,
I have following scenario,
I have Retail Store who send me their daily sales report through Wincor Nixdorf Point of sale. There i am using standard POSLOG2 to SEEBURGER(its a middleware which act as Converter) xml format and then i post that data first in POSDM and then with BAPI i transfer or book that data to SAP Retail.
Above is the one scenario which is working.
This is the Second scenario.......
I have some external Retail store, they dont have Wincor Nixdorf POS, so they send me their Sales Report through SEEBURGER(its a middle Hardware which act as Converter) and SEEBURGER Convert that Sales data to XML format. My question is....
How can i upload or Convert a XML File into IDOC (WPUUMS)in SAP or in POSDM?
any new suggestion are welcome.
Thank you all in advance.
regards,
Niel

Hi,
1. To get the required XML Schema, use transaction code WE60 to go to the IDoc documentation -> enter the IDoc type you want to use (WPUUMS01). Flag control and data record. Then display the XSD by choosing Documentation -> XML Schema from the menue bar. Now you can donwload the XSD for usage in Seeburger.
2. Create your mapping from the POS format into the IDoc XML format in Seeburger.
3. Create an XML File Port in ERP or POS DM using transaction code WE21.
3. To inbound the XML file from Seeburger into POS DM or SAP Retail Seeburger should trigger the function module EDI_DATA_INCOMING. Parameters for this FM are the Pathname to the XML file and the Portname you just created. Based on the port name the FM can derive the port type xml and the data will be handled as XML data.
Regards Carsten

Converting an existing iDoc to an XML file

Hi experts
I want to create an xml file from an iDoc. Is there a program/function module in R/3 that can achieve this? I am running ECC 6.0
Thanks in advance

Hi Murthy,
Thanks for the quick response. I am new to iDocs, so the document is not very explanatory
I created the TCP/IP Connection in sm59, but the connection test fails. Is this expected?
Also, is that all that is required from the first four steps?
1 Creation of logical system for the sender system.
2 Assignment of logical system to the client.
3 Create a logical system for the recipient
4 Creation of RFC destination (Connection type:TCP/IP)
Thanks in advance
Johan Kriek

Batching of multiple IDOCs into 1 IDOC-XML file

Similar Messages

Maybe you are looking for