BATTERY BOOSTER does not work?

how do u know if this application (battery saver) works....it drains my battery instead...BB8520
please someone,,did i waste my money/
Sepherina Allard
Solved!
Go to Solution.

ok
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Battery problems-new battery, but does not work

    Help! I have purchased a battery a few months ago. It worked fine for a little while, and then one day, it would not power from the battery. Here is the strange thing-when I plug it in, it regesters the battery as fully charged. I even let my iBook sit for a few days without using it. I plugged it in and it registered my battery as about 95 percent charged, but stilll would not power up. I don't get it! The battery seems good, but it does not power from it. It obviously charges it, but does not power from it. Ahhh! Please help!

    Will resetting the PMU erase my hard drive or cause damage to my RAM?
    No
    What does it mean when it says Warning: Any RAM disk will be erased. ?
    This is an outdated warning since OS X doesn't support RAM disk. A RAM disk is a technique of using some RAM as a pseudo-disk drive.

  • Just replaced iphone battery!! Please help!! Ear speaker does not work.

    I just replaced my iphone 3g battery. It seemed to go smooth. Everything works normally except the ear speaker doesnt work. When i try to make an outgoing call i cant here it ring, but my phone will actually call another phone. Does anyone know what # that connector is labeled as on the motherboard or back of the screen? Any help would be much appreciated!!!!!

    There may be a problem with the microswitch in the headset jack. Click on the following link for the Palm KB article regarding this issue.
    http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=40427
    If this procedure does not work then the phone will need to be replaced.
    For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
    http://kb.palm.com/wps/portal/kb/na/pre/p100eww/sprint/home/page_en.html
    There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

  • HT201263 my iphone 4 switched off on 70% battery and now wont switch on? also my home button does not work?please help

    My iphone 4 suddenly switched off on 70% battery and now it wont switch back on? my home button does not work either so i can not do the normal reset please help!!

    Sophierose21 wrote:
    my home button does not work
    Then it looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required... Be sure to make an appointment first...

  • IPad 4 switches off when i am using it, even when battery is fully charged.  Restore function (holding down both buttons) often does not work.  Cannot power up iPad.  I have updated software, restarted computer, but no success.  Please help

    IPad 4 switches off when i am using it, even when battery is fully charged.  Restore function (holding down both buttons) often does not work.  Cannot power up iPad.  I have updated software, restarted computer, but no success.  I did restore the iPad about 8 times during the past 2 weeks.  Just completed another restore.  iTunes says the the iPad has been restored and will restart automatically and appear in iTunes when it is ready.  That was 30 minutes ago.  iPad still won't start.  I am looking down the barrel of yet another fruitless restore.  What a crap product.

    Try a reset:
    Hold the Sleep and Home button down until you see the Apple logo.

  • My flash player does not work on my tablet.

    My flash player does not work on my tablet

    Your tablet uses Android OS.
    There is no more Flash Player for Android and there won't be another. Android is no longer compatible with Flash Player. Playing Flash content is very processor consumptive and it drains your battery, also shortening the life of it. Android (Google) recommends using either "Dolphin" or "Puffin" as your browser if you need to view Flash content with a mobile device running Android. They're both free in the GooglePlay store. These browsers use "server side" rendering to reduce the load on your device.

  • Itunes 8.02.2 does not work on my computer

    Hi,
    *I have a dell computer runing xp sp3 pro verison. I installed Itunes 8.02.2 then I restart my computer Itunes does not work for me at all. I have no malware or spyware on my computer. I have tried the tips on apple web site to make itunes start up and work. So I remove 8.02.2 itunes from my computer. Then I installed 8.01.11 the old version of Itunes and it works just fine on my computer. I think that 8.02.2 has a lot of bugs in it. Also, I have a dell notebook with xp sp3 home and the same problem happends to my with version 8.02.2. I got itunes to work on my notebook buy installing 8.01.11. I hope people tell apple that there are some problems with 8.02.2.*
    I hope apple comes out with a new version of itunes that don't have problems like 8.02.2
    *Thanks alot*

    I followed the instructions posted in http://support.apple.com/kb/HT1737 and dont work.
    1) My iPhone battery is 100%.
    2) My PC is a notebook, and only have USB ports at the keyboard.
    3) & 4) I turned off/on several times the PC and the iPhone.
    5) Uninstall (reboot pc) and reinstall iTunes.
    Where can I download a previous version of iTunes?
    Thanks in advance.

  • USB ports does not work

    Hi I have problems with not working USB ports. It used to work. I downloaded actual drivers at msi.com for my gaming notebook GX 60 Destroyer and now my USB ports does not work. What should I do?

    What driver have you updated?
    Try to do an EC firmware reset by removing the battery and the AC adapter then put the battery back with AC adapter attached.
    Same questions like Pegasus asked, does all ports not working? which one exactly? What OS are you using?
    Have you done any changes to the system? (for example: self-install OS or changing OS)

  • Froze on black screen and power button does not work

    my sons ipod touch is stuck on a black screen when plugged into the computer got a spinning wheel and will not connect now spinning wheel will not go away the power button does not work so can not reset it manually
    any suggestions would be appreciated

    - iOS: Not responding or does not turn on
    Neglect the reset and when it says place the iPod in recovery mode use one of thes programs
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I can't restore the back up of my phone and when i try to sync my phone it does not work totally nether what should i do ?

    i am trying to sync and back up my phone but it never works, so i tried to restore my back up but a message is telling me that an error occured so it does not work. It caus me a problem because i won't stop receive messages telling me that my iPhone as no space available even if i have deleted a lot of things.. help me please!

    It might be the battery, it sure sounds as though it could be. What happens if you leave it to charge, does the charging symbol show, does the battery icon show full, part full or empty at any time?
    If you check here; https://locate.apple.com/uk/en/  and enter your postcode in the Service box, you should see the options available to you from Apple and its Authorised Service Providers. They can advise you about the battery and you should be given the cost before you commit to spending your dosh!

  • One of the USB ports on MacBook Pro does not work.

    Hi,
    I purchased a MacBook Pro in Jan '11. Both the USB ports on the laptop were working fine. Recently, I have noticed, any external device connected to the USB port, towards the battery side does not recognize the connection.
    Any solutions ?. Is this defect covered under warranty ?.
    Regards
    Anil Madan

    Anil,
    Try resetting the SMC.
    SMC RESET
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 

  • My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

    My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

    If after you charge it for about three hours and it only last about five minutes the battery is probably dead or there could be another hardware problem.  I would go back to the Apple store and ask them specifically how can it be OK if the fully charged battery only lasts five minutes.

  • IPod model A1059, freezes, unresponsive to all click wheel entries.  Reset does not work.  Does not show up in ITunes or on windows explorer.  What is the problem and how do I fix it?

    IPOD model A1059 appears frozen and is unresponsive to all click wheel entries. Reset does not work.  Does not show up in ITunes or in Windows Explorer.  What is the problem and is there a fix?

    If you are unable to reset the iPod (assuming the hold switch is not in the On position either), then you'll have to let the iPod's battery fully drain. Then connect it to a charger and leave it to charge for a couple of hours.
    B-rock

  • Brand new ipod touch does not work

    Brand new ipod does not work will not sync or power up.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              

  • Ralink RT5390 Does Not Work on the UEK Kernel

    We installed OL6.3 and Ubuntu 12.04 on a new Asus X45A notebook. It has a Ralink RT5390 wireless card. With Ubuntu, both wifi and video work flawlessly. However, the wifi driver (from elrepo) does not work for the the uek kernel (2.6.39). While the wifi driver works when boot into the RHEL kernel (2.6.32), it created an "even bigger problem" in that the video starts at about 1/10 from the left edge of the screen.
    As a result, we can only boot into Ubuntu on this new notebook, but we would like to use the uek kernel. Any suggestion will be appreciated.

    Dude wrote:
    It wouldn't surprise me if was more power efficient because half your hardware, e.g. wireless apparently isn't working ;-) I have three notebooks running OL6. Wireless works on all three of them. (One of the notebooks its wireless has problem with the UEK kernel, but no problem with the RHEL kernel.)
    However, power management support means computer sleep and idle functions to slow down your computer's power
    consumption when it is not needed, e.g. down clock your CPU and slow down your hardware, dim your screen, etc.
    when running on battery, etc.This needs further verification, but all these functions seem to be working with OL6.
    But again, please no one be fooled by my overly optimistic and simplistic comments*. The reality is, I am glad OL6 desktop works at all.
    * For example, I actually installed OL6 on 4 notebooks, one of them "does not work" because I couldn't dim the screen. I did not intend to lie, but subconsciously, I somewhat forgot that there was this failed case.
    Edited by: Ping-Wu on Dec 19, 2012 7:48 AM

Maybe you are looking for

  • Error message with offer to download the 4.1.B.0.587 update and note: "installation not possible" (because it's already there) cannot partition SD card

    Hi - Recently I put the latest update on my LT15i (4.1.B.0.587), after this I rooted the phone, and everything seemed okay. But since then I keep getting an error message with an offer to download the 4.1.B.0.587 update and the note: "installation no

  • OBYC KDM, KDW, KDV and KDR operations

    Hi, I have a problem with differenciating the following OBYC operations: - KDM - I think it should be used for GR/IR exchange rate differences /             or is it used for Material Ledger Single level exchange rate differences - KDR - I think it s

  • Cant print document after lion installation with my fuji xerox printer

    i cant print after lion installation with my fuji xerox c1110b printer, even after i remove and reinstall the driver. in the print window  under status indicate error, for other program even the print button is not working,  need help thanks

  • Camcorder for FCP

    Looking into getting a camcorder for making video of a lesson about 20 min long.Camcorder will be on a tripod. Will be editing in final cut pro on iMac.Budget $500 range. I am looking for good video, good sound and seamless (easiest and fastest) tran

  • Non controllable device lost

    hello everybody there, I am trying to capture analog vhs-footage via a canon mvx350i (the camera serving as a analog-dv converter) but with or without the device connected, the setting for dv-converter does not work. it displays that the device profi