BBP_CCM_TRANSFER_CATALOG (product catalog)

Hi All,
We are implementing CCM 2.0
SRM 5.0
TREX 7.0
I could run BBP_CCM_TRANSFER_CATALOG, and I could see the status in green.
But in SRM Master Data not show as SRM Server Product Data Catalog type.
Could anyone help me?
Regards
Angie.

Hi Jurg,
Pl. have a look at CCM 2.0 config guide.
It will give you all XI settings also.
The same is available on:
service.sap.com/ibc
If you can't locate yrself.
Mail me
[email protected]
BR
Dinesh

Similar Messages

Replicating Products/Catalog from SRM to MDM

I am implimenting SRM and MDM on 7.1 and SRM-MDM Catalog 3.0
I wanted to replicate catalog data from SRM. As we know each catalog record in MDM contains Product, Supplier, Info record data. I am not sure if we have to map all these in MDM or It will be mapped by SAP delivered content for replication.
I am using BBP_CCM_TRANSFER transaction in SRM to transfer data to MDM. In the selection screen I am using 'Category Hierarchy', Category ID and Language fields. I did unchek/check Force Intial Transport and P_debug. There was not much difference.
However I am getting following info messages, but unable to see any data in MDM
16.06.2010 09:27:41: Initial transfer for catalog SRM_EXTRACTED_CTLG
16.06.2010 09:27:42: Determine category TELEPHONE (5 products)
16.06.2010 09:27:42: Start of catalog transfer for 1
16.06.2010 09:27:42: catalog transfer ended
I am now stuck here. Can any one share details of the replication process and steps involved.

Hi Sudha,
Please explain your business scenario. What data you want to replicate from SRM to MDM. We can replicate Suppliers, Contracts and Product Master from SRM to MDM through XI. Make sure you hae configured XI settings for that. You have to download the pre-delivered XI content from SAP Markeplace. Please check Note # 1177779 & 1177780 regarding that.
We can use following reports in SRM to replicate following data in MDM
BBP_CCM_Transfer_Catalog-----Product master
ROS_SUPPLIER_SEND_TO_CATALOG-----Supplier data
SRMMDM_CTR_Transfer----Contract data from SRM
In your case, you are running BBP_CCM_TRANSFER. Please check the SXMB_MONI t-code to monitor the XML messages whether XML files are processing correctly or getting stuck.
Thanks,
Anshuk Saxena

List Price Not getting displayed in B2B Webshop Product Catalog

Hello Experts,
We have done all the required configuration to view the LIST PRICE in B2B Webshop product catalog.
We have done following settings:
1. Pricing Procedure assignment to the PRODUCT CATALOG VARIANT
2. Initial Replication of the product catalog
3. Shopadmin setting for List Price (radio button selection on the GENERAL Informaiton Tab)
4. XCM Setting - No IPC
5. For the defined variant, we have maintain an entry in the Parameter for List Prices - ZPR0 and table as CUS506 and Catalog Price type as List Price.
6 Downloaded the required condition record from ECC to CRM with correct validity period
But still we are not able to see the LIST PRICE. Any other change (say addition/removal of product from CATALOG areas)in the CATALOG is getting dispayed correctly in the WEBSHOP product catalog except LIST PRICE. That means we feel there is no issue from TREX perspective.
Any other pointers will be really helpful.
Regards
DJ

What are the fields for CUS506? During replication if the list price is replicated from this table then all the key fields mentioned in this table should be available during replication for this table.
What my wild guess is that maybe this CUS506 has a field e.g say SHIP_TO or SOLD_TO etc.. Now at the time of replication.. there are no shipto or soldto hence no values/price will replicate to TREX.. hence u will see nothing in catalog.
regards,
Dipender Singh

How to extend the product catalog in CRM?

Hi All
How do u extend the product catalog in CRM?
Anticipating a step-wise guidelines..
Thanks in Advance
Jaman
Message was edited by: Sap_Crm_Guy

Hi
Check this URL:http://help.sap.com/saphelp_crm50/helpdata/en/a8/abf837aea75351e10000009b38f8cf/frameset.htm
Hope it helps

Can we have a b2b webshop without Product catalog in it

Hi Gurus,
I have a scenario where I dont want to Product catalog on the webshop. Customers log in and just want to see the order history.
How can I set this up.
Please explain if this is possoble.
Thank You

Hi Ram,
yes, you will have to create a catalog without products. This is because the catalog is a required field when creating a new shop in the shopadmin. Only when you use the webshop with an R/3 or ERP backend, no catalog is required at all.
Best regards,
Martin

Business partner maintenance for Product catalog view - Problem

Hi All,
I am using the FM 'CRM_PRP_MAINTAIN' to create Business partner assignment for product catalog view.
Can anyone help me with this FM?
I am passing the following:
        gs_prp_bupa_i-ref_kind = 'B'.
        gs_prp_bupa_i-processing_mode = 'A'.
        gs_prp_bupa_i-bupa_ref_guid = gv_partner_guid.
        gs_prp_bupa_i-partner_id = gv_partner.
        APPEND gs_prp_bupa_i TO gt_prp_bupa_i.
        ls_input_fields-ref_kind = 'D'.
        ls_input_fields-objectname = 'PRP_BUPA_I'.
        ls_input-fieldname = 'BUPA_REF_GUID'.
        APPEND ls_input TO ls_input_fields-field_names.
        ls_input-fieldname = 'PARTNER_ID'.
        APPEND ls_input TO ls_input_fields-field_names.
        ls_input-fieldname = 'PROCESSING_MODE'.
        APPEND ls_input TO ls_input_fields-field_names.
        ls_input-fieldname = 'TYPE'.
        APPEND ls_input TO ls_input_fields-field_names.
        APPEND ls_input_fields TO lt_input_fields.
        CALL FUNCTION 'CRM_PRP_MAINTAIN'
          EXPORTING
            it_prp_bupa_i                   = gt_prp_bupa_i
          CHANGING
            ct_prpadm_h                     = lt_prpadm_h
            ct_prpadm_i                      = lt_prpadm_i
            ct_input_fields                   = lt_input_fields
            cv_log_handle                   = lv_log_handle
         EXCEPTIONS
           error_occurred                  = 1
           prp_locked                      = 2
           no_authority                    = 3
           status_change_not_allowed       = 4
           prp_id_already_exists           = 5
           invalid_prp_id                  = 6
           OTHERS                          = 7 .
But i don see the partner assignment working.
My doubt here is wat GUID shud b passed in the field gs_prp_bupa_i-GUID. As of now i m not passing any value here.
Please help me.
IF not this FM wat else can i use?

Hi Ganesh,
Thanks for your response.
i hope you understood my question.i have already performed all the steps which you have mentioned.Understand my query first.
I could solve that query myself.
Message was edited by: mdv sapcrm

Problem with Path Managed property in alternate zones - also we have identified problem with Product catalog in alt zones

Hi All,
I'll start "one step back". Note we have resolved this issue but it is worth mentioning:
Yesterday we set up the product catalog. We were having a lot of inexplicable problems with it initially. After much troubleshooting, we found that it was because we were browsing the SharePoint site via the "Internet Zone" rather than the "Default
Zone" when we "Connected" our site to the product catalog. Issues experienced:
1) "Catalog Item URL Format" displayed error "Properties <Managed Property> specified by the shared catalog could not be found in the search schema" when attempting to connect to the catalog, despite that managed property being
configured correctly. The catalog would connect despite the error, and the navigation worked fine.
2) The search Result Source for the catalog would not return any results. Configuring the query and selecting "Advanced Mode" would show SPSiteURL:http://externalURL.domain.com. Changing SPSiteURL manually to
http://InternalURL resulted in results being returned as expected.
After much troubleshooting, we found that if were browsing SharePoint using the default zone (http://InternalURL) when we connected the Product Catalog, the result source then worked properly (internally and externally).
Ok, so now onto our current problem:
The Product Catalog appeared to be working properly (internally and externally) after figuring out that we needed to connect it from the Default Zone. However, we have found a remaining glitch, which doesn't appear to be Product-Catalog-specific. Consider
the following scenario:
1) We click a category in our Product Catalog, such as Electronics
2) A list of our electronic devices are presented via the "Category" display page
3) If we click on a specific item, a different URL is returned internally vs externally. We only get the friendly managed navigation URL when browsing via the Default zone. And of course totally different pages load based on which URL you get.
Internal (when browsing via Default zone):
http://InternalURL/catalog/PRODUCT-CATEGORY/PRODUCT-NAME
External (when browsing via Internet zone):
http://ExternalURL.domain.com/catalog/Lists/Products/DispForm.aspx?ID=1
We have reviewed the display template, and the "Path" managed property is simply being used to render the link. Furthermore, we have configured the Content Search web part's "Property Mappings" to show the "Path" MP, and it
displays the same (wrong) result externally.
This tells us that the Path MP is not correctly rendering "Friendly URLs" when using managed navigation.
Any help/ideas?
Our environment:
SharePoint Version: 15.0.4667.1000
Default Zone: http://InternalURL
Internet Zone: http://ExternalURL.domain.com
We are NOT using host named site collections
We ARE crawling the Default zone URL in our content source
Thanks,
Tommy

Hi,
We have now also observed the same issue with a Managed Property of type “Hyperlink/Picture”. The picture returns the wrong URL externally.
This post describes the same issue, however the poster found that setting UseAAMMapping=True doesn’t work in 2013:
http://sharepoint.stackexchange.com/questions/104806/set-the-useaammapping-property-of-a-managedproperty-object-map-an-url-of-a-h
We checked, and our Picture MP had UseAAMMapping=False. We set it to True, did a full crawl, and see no change in behavior. Path already had UseAAMMapping=True.
More info:
http://macslui.blogspot.com/2013/02/sharepoint-2010-problem-in-image-result.html
https://camerondwyer.wordpress.com/2014/08/04/beware-sharepoint-2013-search-results-and-the-listurl-property/#comment-2606
Thanks,
Tommy

Table where documents are linked to materials in product catalogs?

Hi
We are working on ISA 5 and we are blocked trying to figure out which one is the table where we can see the link between a Document and the Material master located in a product Catalog.
I've created the document via transaction - CV01N (Document creation and Assignment to the material master) and I've also assigned it via the catalog maintenance transaction - WWM2. But so far I cannot find the table where this assignment is done.
Can you please help me on this one?
Cheers
Hugo

The table you need for object links of a document is DRAD.
Rene

Create a product catalog from flat fiile

Hello All,
I have a requirement to create a product catalog from a flat file. Basic requirement is to add products under product catalog. Further requirement can be extended to add views and add images to product catalog.
I want to know steps or function modules which will be used in order to achieve basic requirement first and then extended requirement.
Any sample example explaining the same will be more useful.
Thanks in advance
Madhura

By uploading images to a Product Catalog, the program below will also add the item to the catalog area specified.
SE38 - Run Program COM_PCAT_MASS_DOC_IMPORT
It has it's own Program Information to explain how it works.
Here's the first portion of the that information:
Title
Mass Import of Multimedia Documents for Product Catalogs
Purpose
This report enables you to automatically import multimedia documents that are already available in a file system and assign these documents to product catalog items. The items are identified using a product number. An item is created if a corresponding one is not available.
A simple text file, which can be created using the normal spreadsheet programs or simple text editors, is used as a basis for the import.
We have used this in the past, but it has some performance issues, so experiment to be sure you don't try to upload too many images at once...it can bog down after a few batches and begin crawling.

Create the Product Catalog from Flat file

Hi,
We have a requirement to create the Product catalog (CRM) from flat file data. We have the required data like Product catalog ID, description, sub areas and products are present in the Exel file. Now we need to create product catalog automatically using the report. Can u give me any pointers on what FM and BAdis to be callled in this report?.
Thanks and Regards,
S Reddy

Link:[Create product basic Data|http://esoadocu.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DDC84252E3AEF0F1AA5A001A64D3F460&id=8C145DB8CF3A11DC2B8D000F20FCB6A9]

PDF document in the ISA product catalog

Hi all,
Anyone who knows how to display PDF documents in the ISA product catalog?
In the document "Internet Sales in a B2B Scenario Presentation" there's an indication of that you can show, amongst others, PDF documents in the detailed screen for an item. We have an R3/ISA 4.0 B2B scenario.
Thanks in advance!
Best regards,
Ulrika Enskog

Hi, and thanks for the answer!
This was what I thought I had to do.
It turns out that there actually is an SAP note on this issue - 608422 - which deals with adding additional attachments to catalog items in ISA R/3. And in SAP note 610393 they have provided example java and jsp files for doing this.
Best regards,
Ulrika

How can i upload items in the product catalog ?

Hello ,
How can i upload items in the product catalog? ( Other than running the concurrent program to import the items from inventory module)

Hi,
Is this in iStore or Other CRM Module?
Regards
Shyam
Please see following Metalink Note ID for all in One solutions
Oracle E-Business : All In One Metalink Note ID's
If you are happy with the Document, please mark as Helpful by doing so this will provide assistance for other people looking for answers to their queries.

Text table for long text of product catalog area and product description

Hi experts,
I'm a new comer in CRM, what my current job is to do the translation for CRM system and its portal, e.g. webshop. Now I met some questions as below, Could you please give me some advices?
1. Long text for product catalog area (t-code: COMM_PCAT_ADM; Product Catalog: PCSHOP)
I found a table named STXL(STXD SAPscript text file lines), maybe, it is related to the long text(product catalog area), but I can not get anything from the field CLUSTD of the table STXL as its data type is RAW. Maybe, there is a text table in CRM to store these long text information, but I dont know, Could you please give me some ideas?
2. Long text for product description (t-code: COMM_PCAT_ADM; Product Catalog: PCSHOP)
I found a table named COMM_CFGLNGTXT(Long Texts for Different Objects), I can find some long texts(product description) in this table, but some others, I can not find them. I dont know why? Maybe it is not a correct text table. Could you please give me some advices?
Thank you very much.
Quanyin

Hi Uwe,
Implement the BADI DOC_PERSONALIZE_BCS and use method PERSONALIZE_DOCUMENT. In this method therz an parameter FLT_VAL, this can be used to derive the description.
Award points if its useful....
Regards,
B Raju

Wrong characters appeared in long text of product catalog in CRM5.0 system

After upgraded to CRM5.0, there are some wrong charaters in long text of product catalog.
Before upgrade, some special letters such as u201Cu2013u201C and u201Cu2122u201D can be showed correctly.But after upgrade to CRM5.0 system, all of them are showed as "?".
What's the problem and how to fix it?
Thanks,
Shirley

After upgraded to CRM5.0, there are some wrong charaters in long text of product catalog.
Before upgrade, some special letters such as u201Cu2013u201C and u201Cu2122u201D can be showed correctly.But after upgrade to CRM5.0 system, all of them are showed as "?".
What's the problem and how to fix it?
Thanks,
Shirley

How to attach PDF file to product catalog in Internet Sales R/3

Hi Experts,
We are implementing SAP E-Commerce (Internet Sales) for mySAP ERP or SAP R/3, release 5.0.
I need to attach a PDF file to the product in the product catalog of the Web Shop. Some where in the documentation I have read that itu2019s possible.
I have created a document with following parameter:
Document 2001 \ Document Type L01 \ Document Part 000 \ Document version 00
In that document, I have created one original with the following parameters:
Applic.     PDF \ Data Carrier    isar3 \ Original      <WebServer folder>/SAP.pdf
I have assigned this document objects to the product as u2018Documentsu2019 in the product catalog. (through Tcode WWM2).
I have uploaded the PDF file to the correct Web Server folder.
But I CAN NOT see my PDF file anywhere in Web Catalog.
By the way, following the same steps I have also created another Document containing 2 original images:
Document 2002 \ Document Type L01 \ Document Part 000 \ Document version 00
In that document, I have created 2 originals with the following parameters:
Applic.     LIM \ Data Carrier    isar3 \ Original      <WebServer folder>/ Test_big.jpg
Applic.     SIM \ Data Carrier    isar3 \ Original      <WebServer folder>/ Test_small.jpg
I have assigned this document objects to the product as u2018Documentsu2019 in the product catalog. (through Tcode WWM2).
I have uploaded the image files to the correct Web Server folder.
I CAN see the small and large image in my product catalog with out any problem.
Is it possible to attach PDF in this way? Am I making any mistake? Am I selecting the correct document type (L01) for the document?
Please guide me.
Thanks in Advance.
Regards,
Abir Kundu.

Hi Abir,
           SAP standard for R/3 E-commerce allows only SIM and LIM applications.
Any further requirements like PDF needs to be an enhancement on the product details JSP.
Also make sure you are storing the PDFs in the right location to retreive it on the product details.
Thanks,
Kiran Kanth.C

BBP_CCM_TRANSFER_CATALOG (product catalog)

Similar Messages

Maybe you are looking for