Replicating Products/Catalog from SRM to MDM

I am implimenting SRM and MDM on 7.1 and SRM-MDM Catalog 3.0
I wanted to replicate catalog data from SRM. As we know each catalog record in MDM contains Product, Supplier, Info record data. I am not sure if we have to map all these in MDM or It will be mapped by SAP delivered content for replication.
I am using BBP_CCM_TRANSFER transaction in SRM to transfer data to MDM. In the selection screen I am using 'Category Hierarchy', Category ID and Language fields. I did unchek/check Force Intial Transport and P_debug. There was not much difference.
However I am getting following info messages, but unable to see any data in MDM
16.06.2010 09:27:41: Initial transfer for catalog SRM_EXTRACTED_CTLG
16.06.2010 09:27:42: Determine category TELEPHONE (5 products)
16.06.2010 09:27:42: Start of catalog transfer for 1
16.06.2010 09:27:42: catalog transfer ended
I am now stuck here. Can any one share details of the replication process and steps involved.

Hi Sudha,
Please explain your business scenario. What data you want to replicate from SRM to MDM. We can replicate Suppliers, Contracts and Product Master from SRM to MDM through XI. Make sure you hae configured XI settings for that. You have to download the pre-delivered XI content from SAP Markeplace. Please check Note # 1177779 & 1177780 regarding that.
We can use following reports in SRM to replicate following data in MDM
BBP_CCM_Transfer_Catalog-----Product master
ROS_SUPPLIER_SEND_TO_CATALOG-----Supplier data
SRMMDM_CTR_Transfer----Contract data from SRM
In your case, you are running BBP_CCM_TRANSFER. Please check the SXMB_MONI t-code to monitor the XML messages whether XML files are processing correctly or getting stuck.
Thanks,
Anshuk Saxena

Similar Messages

SRM MDM Catalog - Transfer Contracts from SRM - XI - MDM

Hi,
We are implementing SRM MDM Catalog1.0 with SRM 5.0 & ECC 6.0.
We have already configured XI content for MDM Catalog.
We have also done the basic settings for transferring contracts from srm to XI (including Backend System & Check box in Contracts for transfer to catalog).
But when i run the report SRMMDM_CTR_TRANSFER, the log tells me that contracts transfer has been initialized, but I cant see any XML message in SXMB_MONI
Can someone pls help and tell me why is that happening??
Thanks in advance.
Regards,
Jasmeet

Hi Mausam,
yes we have a SRM system from which we want are going to be sending Contracts, Prod Id's, Product Categories, Suppliers List etc from SRM to MDM using XI.
We have the Pre delivered content for XI from which we have set up the Interfaces etc.
This mapping between SRM-XI-MDM works pretty fine if i try to send Products or suppliers from SRM. I can see the IDOCs being generated. But when i run the report for Contracts, I cant see any IDOC in SXMB_MONI in SRM which is my source system.
So hence my question..... Is there some other way by which Contracts are transferred and if so then how and where can I see it.
Regards,
Jasmeet

Transferring Product Data from SRM 7.0 to SRM-MDM 3.0

Dear SRM-MDM experts,
We are running the program BBP_CCM_TRANSFER_CATALOG to transfer product data from SRM 7 to SRM-MDM 3.0 The question we have is after running the program, where do we find the file the XML file which the program has generated so we can see the results? SLG1 just shows how many products were processed. We need to see the list of the products generated.
Thanks and regards
Pedzi

Hi Pedzi,
You can find the generated XML file in MDM server. Here is the path to get the Product Data XML file.
C:/usr/sap/SRD\MDS00/mdm/distributions/MDD_ORCL/REPOSITORYNAME/Inbound/SRM/_MDMProductDataTransmission/Archive
Thanks,
Anshuk Saxena

Problem in replicating the material from SRM to CCM

Hi SRM gurus
We have material created in ECC6 and replicated to SRM, but the same material is not being replicated to CCM. Back ground job for program BBP_CCM_TRANSFER_CATALOG is running.
we are on SRM 5.0, Extended calssic scenario.

Hi
Which CCM version are you using ? What steps are you doing ?
CatalogUpdateNotification_Out is configuration on XI for the location of the XI server.
When you run report BBP_CCM_TRANSFER_CATALOG this sends the materials to the XI server, when then sends that back to the CCM instalation (on our system this is the same client/box as the SRM application). Once there the catalog can be published through the authoring tool to the respective catalog, or a report could run to send this out.
I would suggest looking at the config guide for CCM2 - it goes through what you need step by step. Incase you don't have the same, i can email at your mail id, if any.
Please go through the SAP OSS Notes and links below, which will definitely help ->
Note 979079 Increases waiting time during SRM catalog transfer
Note 904757 Further performance improvement of BBP_CCM_TRANSFER_CATALOG
Note 874874 To improve performance of "BBP_CCM_TRANSFER_CATALOG"
Helpful links ->
Re: Material/service master catalog upload (ECC-CCM)
CCM SRM product catalog
Re: How to load materials, contract lines & info recs directly from R/3 to CCM
BBP_CCM_TRANSFER_CATALOG (product catalog)
Re: Product ID format settiings in R/3, EBP and CCM?
Re: Uploading Product Data from SRM to CCM?
Do let me know.
Regards
- Atul

Price Information data from SRm to MDM

Hello,
I m working on SRM-MDM Catalog 2 scenario.
I have imported lookup table data in MDM using MDMGX transaction.
But i couldnt get data for Price Lookup Qualified Table.
Can anybody please tell me how should i send Price Information data from SRM?
Thanks,
Maheshwari

Hi,
By MDMGX, you replicate only the lookup table data.if you want to see which kind of look uptable data it replicate, you can refer the FS Guide/Config Guide of SRM-MDM.
when you replicate the main table data from SRm to MDM via XI then you will get all those info related to price in the Qualified lookup table.
Hope this will help you.
TNR,
saurabh...

Replicating Product Catalog for CRM E-commerce

Hi All,
We have CRM 5.0 and trying to implement B2B E-Commerce. We created a product catalog in the CRM and configured XCM and shopadmin application. We created webshops for B2B. The B2b Webshops list is available.
I don´t replicate the product catalog. But after selecting any of the shop we get this error.
*The catalog that you have selected is currently unavailable; try again later *
Can anyone tell me how to solve this problem.
We have checked Trex and J2ee connection too
Is it possible access to WebShop witihin replicated product catalog?
Thank you

You replicate your product catalog to the TREX server to enhance search functionality and scalability, and to improve system performance for your customers. You replicate your product catalog from your ERP server to the TREX server, using an ABAP Report.
Transaction code ISA_CAT_REPLICATION
You use the transaction ISA_CAT_REPLICATION (ABAP Report ISA_CATALOG_REPLICATION) to replicate product catalogs from your SAP ECC server to a TREX server.

Extract/download catalogs from SRM CCM2.0

Hello,
Does anybody know how to download/extract catalogs from SRM CCM2.0 catalog?
Regards,
Vikas

Hi Vikas,
Please check SAP Note 1376770 - CCM to SRM MDM Catalog data migration.
Thanks,
Anshuk Saxena

Create a product catalog from flat fiile

Hello All,
I have a requirement to create a product catalog from a flat file. Basic requirement is to add products under product catalog. Further requirement can be extended to add views and add images to product catalog.
I want to know steps or function modules which will be used in order to achieve basic requirement first and then extended requirement.
Any sample example explaining the same will be more useful.
Thanks in advance
Madhura

By uploading images to a Product Catalog, the program below will also add the item to the catalog area specified.
SE38 - Run Program COM_PCAT_MASS_DOC_IMPORT
It has it's own Program Information to explain how it works.
Here's the first portion of the that information:
Title
Mass Import of Multimedia Documents for Product Catalogs
Purpose
This report enables you to automatically import multimedia documents that are already available in a file system and assign these documents to product catalog items. The items are identified using a product number. An item is created if a corresponding one is not available.
A simple text file, which can be created using the normal spreadsheet programs or simple text editors, is used as a basis for the import.
We have used this in the past, but it has some performance issues, so experiment to be sure you don't try to upload too many images at once...it can bog down after a few batches and begin crawling.

How do we replicate product categories from SRM/ECC in to SUS system

How do we replicate product categories from SRM/ECC in to SUS system in srm 7.0

Hi Gopal,
Are you confused between SUS & ROS? If you meant ROS, it is advised to create local product categories in ROS under COMM_HIERARCHY.
Let us know your exact requirements.
Regards,
Nikhil

Product catalog from mdm to crm isa

HI MDM GURUS,
COULD ANYONE PLEASE TELL ME THE STEPS TO REPLICATE PRODUCT CATALOGS DIRECTLY FROM MDM TO ISA (INTERNET SALES APPLICATION)
PRIYA

Hello,
I wish the answer was simple and I get all the 10 points. But, I have lot more to add than just giving a report program name.
Usually the CRM E-Commerce accesses the MDM product catalog as an external catalog. It is not customary to export the Catalog content from SRM-MDM to CRM-ISA. Instead the MDM catalog is Web Enabled for use as an external catalog by CRM-ISA. In the SRM system, the report program
/CCM/PE_START_REG_PUBLICATION
can be used to publish the catalog. Usually, this is scheduled as a background job to run periodically to publish the catalog.
The E-Commerce (CRM-ISA) has Open Catalog Interface (OCI) hooks available to do this. But this needs to be configured in the XCM to access such external catalogs.
Please read the contents in this link for a overview idea of [External Catalog Integration (via OCI)|http://help.sap.com/saphelp_crm50/helpdata/en/2f/86653fac7ab21ae10000000a114084/content.htm]
Also, start from [Service Market Place - SRM|http://service.sap.com/srm] and goto SRM-MDM Catalog to know more about the catalog and see the Export process for other possibilities.
Easwar Ram
http://www.parxlns.com

Issue with Contract Replication from SRM to MDM - XML structure

Hi
We are having an issue with trnsfering a contract to MDM. We have released the contract for update to MDM in the contract through the distribute to catalog option. An XML is generated in SRM that gets sucessfully passed to PI through Catalogupdatenotification_out. In PI the XML fails in the Interface Determination step. the issue that has been noticed is that the XML that is generated in SRM does not contain product category or product ID which is basically what the condition mapping in PI checks for. The conditions in PI were setup as per SAP.
But now the XML fails in PI because it does not find a combination for Catalog type code = 03 and product category. Please find the XML structure in SRM and you will see that it does not have a product category even though the contract has one.
<?xml version="1.0" encoding="utf-8" ?>
- <n0:CatalogTransmission xmlns:n0="http://sap.com/xi/EBP" xmlns:prx="urn:sap.com:proxy:SS1:/1SAI/TASDE808778FFEB81012891:701:2010/10/07">
- <StandardBusinessDocumentHeader>
<ID schemeID="0080">56000004100000000220110616202243</ID>
<CreationDateTime>2011-06-16T20:22:43Z</CreationDateTime>
- <SenderParty>
<InternalID schemeID="PartyID" schemeAgencyID="SS1CLNT100">143</InternalID>
</SenderParty>
</StandardBusinessDocumentHeader>
- <Catalog>
<ID>5600000410</ID>
<CatalogTypeCode>03</CatalogTypeCode>
- <NameList>
<Name>(Copy of Contract 5600000395)</Name>
</NameList>
<ActionCode>04</ActionCode>
<CompleteTransmissionIndicator>true</CompleteTransmissionIndicator>
- <ValidityDateTimePeriod>
<StartDateTime>2011-06-13T12:00:00Z</StartDateTime>
<EndDateTime>2012-06-12T12:00:00Z</EndDateTime>
</ValidityDateTimePeriod>
- <CatalogContent>
- <ItemList>
- <Item>
<ID>1</ID>
<ActionCode>04</ActionCode>
<CompleteTransmissionIndicator>false</CompleteTransmissionIndicator>
- <PropertyValuationList>
- <PropertyValuation>
<PropertyReference>/CCM/PRICE</PropertyReference>
- <PropertyValues>
- <MultipleValue>
<Index>1</Index>
- <SimpleValue>
<AmountSpecification currencyCode="USD">1.0</AmountSpecification>
</SimpleValue>
</MultipleValue>
</PropertyValues>
</PropertyValuation>
- <PropertyValuation>
<PropertyReference>/CCM/PRICE_BASIS_QUANTITY</PropertyReference>
- <PropertyValues>
- <SimpleValue>
<QuantitySpecification unitCode="EA">1.0</QuantitySpecification>
</SimpleValue>
</PropertyValues>
</PropertyValuation>
- <PropertyValuation>
<PropertyReference>CCM/PMNTTRMS</PropertyReference>
- <PropertyValues>
- <SimpleValue>
<NameSpecification>0002</NameSpecification>
</SimpleValue>
</PropertyValues>
</PropertyValuation>
</PropertyValuationList>
</Item>
- <Item>
<ID>2</ID>
<ActionCode>04</ActionCode>
<CompleteTransmissionIndicator>false</CompleteTransmissionIndicator>
- <PropertyValuationList>
- <PropertyValuation>
<PropertyReference>/CCM/PRICE</PropertyReference>
- <PropertyValues>
- <MultipleValue>
<Index>1</Index>
- <SimpleValue>
<AmountSpecification currencyCode="USD">12.0</AmountSpecification>
</SimpleValue>
</MultipleValue>
</PropertyValues>
</PropertyValuation>
- <PropertyValuation>
<PropertyReference>/CCM/PRICE_BASIS_QUANTITY</PropertyReference>
- <PropertyValues>
- <SimpleValue>
<QuantitySpecification unitCode="EA">1.0</QuantitySpecification>
</SimpleValue>
</PropertyValues>
</PropertyValuation>
- <PropertyValuation>
<PropertyReference>CCM/PMNTTRMS</PropertyReference>
- <PropertyValues>
- <SimpleValue>
<NameSpecification>0002</NameSpecification>
</SimpleValue>
</PropertyValues>
</PropertyValuation>
</PropertyValuationList>
</Item>
</ItemList>
</CatalogContent>
</Catalog>
</n0:CatalogTransmission>
Edited by: vishakhrajeev123 on Jun 20, 2011 6:49 PM

Dear Krupa,
Thank you for your quick reply.
So we should consider the scenario where SRM is the central repository for the contracts, and all the changes done in SRM should be replicated to ERP.
In this scenario, do you know which steps should be done to allow contract replication from SRM to ERP? I already created a central contract in SRM but there is no message sent to PI.
Thanks in advance.
Regards,
Andreia

Replicating Product Catalog for CRM E-commerce (empty)

Hi All,
We have CRM 5.0 and trying to implement B2B E-Commerce. We created a product catalog in the CRM and configured XCM and shopadmin application. We created webshops for B2B. The B2b Webshops list is available.
I replicated the product catalog, but When I watch the ftp folder I saw is empty. The system created folder but not images.
But after selecting any of the shop we get this error.
*The catalog that you have selected is currently unavailable; try again later *
Can anyone tell me how to solve this problem.
We have checked Trex and J2ee connection too
¿Thank you

Hi Lyda,
My best suggestion is, to separate the catalog product content from MIME (images) content while publishing.
First try publishing only a very small catalog product content without images. You can do that by not entring any value in the field - 'Publishing Computer ID' Also no need to check any of the check boxes under this field. Make sure you have enabled all required catalog components (header, variant and products etc) Also make sure you have all green lights after the initial replication.
If you have some red lights then check each red line for the error. Make sure you have esablished the necessary connection to TREX using tx SRMO
Also check XCM configuration http://CRM server:port/b2b/admin/xcm/init.do for a valid webcatalog component configuration.
If all of the above settings are OK, then check with BASIS team whether TREX installation is done properly with appropraite XCM configuration. Since you are on CRM 5.0, then SLD is a valid component where TREX has to be registered with it.
You may tcodes SRSE. TREXADMIN and SES_ADMIN to validate the TREX availability and indexing.
Hope this helps you in solving your problem
Do not forget to reward the useful answers
Regards,
Paul Kondaveeti

Create the Product Catalog from Flat file

Hi,
We have a requirement to create the Product catalog (CRM) from flat file data. We have the required data like Product catalog ID, description, sub areas and products are present in the Exel file. Now we need to create product catalog automatically using the report. Can u give me any pointers on what FM and BAdis to be callled in this report?.
Thanks and Regards,
S Reddy

Link:[Create product basic Data|http://esoadocu.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DDC84252E3AEF0F1AA5A001A64D3F460&id=8C145DB8CF3A11DC2B8D000F20FCB6A9]

Not able to Login to Punchout Catalogs from SRM 7 portal

Hi Experts,
We are upgrading from SRM5.0 to SRM7.0.
We have 2 development boxes each for SRM5 and SRM7.
The problem is Vendor Pucnhout URLs are not opening from SRM7 portal. It opens the login screen asking userid/password.
I have compared the IMG activity (Define External Web Services (Catalogs, Vendor Lists etc.)) (The maintenance screen for general product catalog data ) . The User id and password are set same in SRM5 and SRM7.
When I apply the userid/password (that is set under IMG) on the punchout site opened from portal, then the vendors site is not accepting it.
Do we need to have different userid/password to make punchout catalogs working from SRM7?
if yes, how can that be done?
Thanks,
Chandu

The punchout URLs are working after enabling third party cookies.
Path for IE is
Tools-> Internet options-> Privacy-> Settings-Advanced -> Third_party Cookies-accept
Firefox
Tools-> Options-> Privacy->Accept Third Party Cookies

Transfer master data such as contacts and products from SRM to MDM catalog

Hi! We have a client who is not using PI as their middleware. They are using SRM 7 with SRM-MDM catalogue. My question is: do we definitely need PI in order to distribute product master and contract data to the catalogue? When programs such as BBP_CCM_TRANSFER_CATALOG and MECCM are run, is the data passed on to PI automatically? Or do they just generate an XML file in a designated location which we then use to upload to SRM-MDM Catalog? In this case, I suspect we can use other middleware to handle the upload into the catalog?
Appreciate clarification on the above.
Thanks!
SF

Hi,
PI is required. Mapping is executed in PI.
If you do not want to have PI, you can develop custom extractor and mapping.
Regards,
Masa

Replicating Products/Catalog from SRM to MDM

Similar Messages

Maybe you are looking for