BBP_DOCUMENT_TAB does not get populated with shopping cart

Hello Gurus,
We are facing some weird issue out of blue. We have SRM 5.0 Classic scenario with ECC 6.0 backend system. We have everything configured and it was working i mean shopping carts were successfully transferring into ECC system as PR.
Suddnely now we are getting error Item in transfer process for all the shopping carts. While checking into RZ20 monitor it shows following error " Backend application errors: Shopping cart (PReq. 7000027359): W5 002 No items exist (not possible to save)".
When we put debug in CLEAN_REQREQ_UP we found out that table BBP_DOCUMENT_TAB which should get populated whenever shopping cart is approved it not getting any data.
Could you please let us know what could be the reason? As all the user IDs with which RFC's are maintained at SRM and ECC level active and all proper authorization are there.
Please advise.
Thanks
Ritesh

Hello Ritesh,
Actually, the document tab is updated by the SC transfer (SC spooler). Each time the system starts the shopping cart transfer, an entry is created in BBP_DOCUMENT_TAB until the CLEAN_REQREQ_UP is executed.
You could debug the shopping cart transfer and check if the follow-on document is being created.
Also, you could check the SPRO customizing -> SRM SERVER -> Techcnical Basic Settings -> Set Control Parameters, and check its value.
As additional information, you can check the note 1173815, which provides some information regarding the follow-on document creation (customizing tables).
I hope it helps.
Kind regards,
Ricardo

Similar Messages

Dbacockpit overview pane does not get populated

Hi guys,
I have already gone through the several other threads on sdn which repeat the same issue here but I am not able to find a solution via them. Can any one give me some leads into this...
-- CHANGES DONE --
We applied all relevant support packs which were part of Support stack 13. This involved also patching SAP BASIS from 10 to 13. Also NW04S 700 kernel was upgraded to patch 114 (SAPEXE and SAPEXEDB SAR packages)
STATEMENT OF PROBLEM(S)
Tcode dbacockpit does not refresh data in the overview pane.
note: db02old still works and we are able to refresh stats from there but dbacockpit overiew pane does not get populated.
Also post support packs: sap_collector_for_performance runs successfully but reports in job log database system is not supported
When we do a refresh via dbacockpit, the job refresh space statistics ends with a compute bcd overflow dump.
CHECKS ALREADY MADE
--Note 1066044 for the BCD overflow dump does not help. We are already at BASIS pack 13 and the correction contained in the note is already in place. As
per the note since are already at BASIS SP13 we should not be facing this. Why are we facing this then ?
--Note 868063
Call report rsoracup; put in con_name=DEFAULT; operatio=CREATE;F8 did this.
--Note 1002840.(checks done as per note)
a) Check if SAP_Collector_for_perfmonitor is scheduled hourly
It completes successfully but gives job log below
1/16/2007 12:06:14 Job started
1/16/2007 12:06:14 Step 001 started (program RSCOLL00, variant , user ID DDIC)
1/16/2007 12:06:14 Clean_Plan:Cleanup of DB13 Plannings
1/16/2007 12:06:14 Clean_Plan:started by RSDBPREV on server
1/16/2007 12:06:14 Clean_Plan:Cleaning up jobs of system xxx
1/16/2007 12:06:14 Clean_Plan:finished
1/16/2007 12:06:15 Database system not supported
1/16/2007 12:06:17 Job finished
Why ?? (we got oracle 10.2.0.2)
b) se16 -> table TCOLL. Check if entery RSORACOL exists.
It does exist as below
RNAME RSORACOL
RENUM 1
SYTYP S
ALTSY
DAYOW XXXXXXX
TIMOD XXXXXXXXXXXXXXXXXXXXXXXX
c)SE16 -> table ORA_MON_DBCON. Check for enrry con name: DEFAULT.
It does exist as below
CON NAME DEFAULT
STATUS A
MAX RUNTIME 1,800
MAX UPLOAD 1,000,000
LOG LIFE 100
DESCRIPTION Local database. R/3 system available.
d)se16 -> table db02_coll_plan. Check if all the entries have status A and there are 64 entries. This is ok
--Note 1042725
SE16-> PROGDIR for Name= 'LSDBORA3F03'; Set field EDTX to blank
All entries have EDTX blank but there is no entry 'LSDBORA3F03
Despite all the above checks I am unable to get the dbacockpit to refresh. Does anyone have any ideas. Will putting in the latest DBSL shared library patch for oracle solve this... I did SAPEXE and EXEDB.SAR latest. Any ideas...?
Cheers, Vikram
[email protected]

For this issue it's still not working for me in Sanbox BI. I got a SAP message open for this. But I got it to work on Dev and TST systems. There was one mistake I was making. This may not be the cause though but just for your info. When we go to dbacockpit, click on collector setup icon. And there when we give connection name = "default" and then action as "create connection", I was not saving the variant. Click save and give a name to the variant like "refresh stats" or something. Then click refresh icon so that the "Refresh space statistics" will run in background. When I saved the variant on dev and test BI I did not end with a BCD overflow dump for the "refresh space statistics" job.The refresh space stat job needs to find the variant name.And this then populated the dbacockpit -> space -> overview pane. Although the "perf for monitor" job still has log entries "db system not supported" that doesn't matter. It's probably a message we can ignore.
Also if you are still facing prob, check these.
You say you are on SP12 which SP component are you referring to (stack number ?. BASIS ? BW ?). Make note I have done the support stack 13 which contains upto the BW patch upto 15 and upto BASIS patch 13. Note 1066044 says if you have BASIS 13 you won't face this problem .
Is your "perf for collector" job running without issues. That is a prereq to the "Refresh space stats" job. Try to troubleshoot that as well. I think the refresh stats job has to find the data in table MONI which gets populated via "perf for collector" (RSCOLL00).
regards, Vikram

Dispute case does not get updated with subsequent partial payment

Hi Experts
I am now still testing the Dispute management .. but it's my first time to see that some times created dispute case does not get updated with the payment posted against the invoice which the dispute case has been raised .. when i trying to add open item to the current dispute case i face this Error..
Process step 004: Change not possible, process step 003 missing
Message no. UDM_MSG037
Diagnosis
The dispute case is to be changed by process step 004 from accounting. However, there is at least one process (for example, clearing transaction from payment or credit memo) that was performed before the current step and that has not yet updated the dispute case. The changes to the dispute case must be carried out in the correct order.
System Response
The dispute case could not be changed.
Procedure
In an asynchronous change to dispute cases using IDoc, make sure that all IDocs of the previous process have been posted. Then you can carry out the required action (for example, post the current IDoc from process step 004 or include further items). The immediate previous process step is 003.
Your kind feed back is highly appreciated..
Regards
Mahmoud EL Nady

Hi
Thanks for straight forward solutions its now working properly after run the program.. thanks too much..
also do i need to run this program periodically or once i notice that one dispute case it not getting updated?
Regards
Mahmoud El Nady

String does not gets splitted with "|"

String does not gets splitted with "|" ?
String str="abc#def|ijh#klm";
String[] pieces=str.split("|");
System.out.println(pieces[0]);

'|' has special meaning (OR) so you need
String[] pieces=str.split("\\|");

Reservation not getting created from shopping cart for stores order.

Hi experts,
Reservation not getting created from shopping cart for stores order,process used is some custom BADI.Extended classic scenario is the procrss .
Please help me
Thanks in advance.

Hello,
please check below wiki:
Determination of the follow-on document type
Regards.
Laurent.

When I add an event to my ipad it does not get synced with any other calendars on my other devices.

My calendar on my ipad will sync with any information added on my android phone or on my PC but if I add information directly on my ipad it does not get added to my PC or phone.

Do you have iCloud?
As it states hereyou need it tp sync.
Allan

PO Custom Field not getting filled from Shopping Cart

Hi Gurus,
I am new to SRM. The requirement I had was to add a new field to the SC. I read several posts and articles on this but couldn't find the solution to it. I managed to do this modifying the corresponding structures in SRM and making the necessary changes in R/3 so the new filed can be seen in ME21/22/23N.
I checked Andreas Milbredt document to achieve it as mentioned:
Document: How to transfer custom fields from SRM to Backend.
http://www.sdn.sap.com/irj/sdn/index?rid=/library/uuid/20b36c12-685f-2c10-4fb4-ba2e0b969c27
After that, when I create a Shopping Cart, the value in the New field is not transferred to the Back end.
I coded the following BADIs and User Exits:
In SRM:
BBP_CUF_BADI_2 (MODIFY_SCREEN) ->To enable or disable the field depending on conditions. Works fine.
BBP_DOC_CHECK_BADI (BBP_DOC_CHECK) -> To do some checks. Works Fine
BBP_CREATE_BE_PO_NEW (FILL_PO_INTERFACE1) ->Here I fill structures BAPI_TE_MEPOITEM and BAPI_TE_MEPOITEMX. I added another u2018Xu2019 to indicate the new field to BAPI_TE_MEPOITEMX. But I think I am not doing it right. This structure BAPI_TE_MEPOITEM/X, does the order of the fields correspond to the order of the fields in any of these 3 structures (which I am using)?
INCL_EEW_PD_HISTORY_CSF
INCL_EEW_PD_ITEM_CSF
INCL_EEW_PD_ITEM_CSF_SC
I also checked the following link:
Map a custom SRM field to a standard field in R/3
In R/3 I populated the Exits Andreau2019s mentions on his article. Am I missing anything else?
Thanks & Regards,
Ernesto.

Hi Ernesto,
You can find out how your BAPI structure is being populated (by generating the test data ) using FBGENDAT program and activating the BAPI_PO_CREATE1 (and you will need to set the parameter for the specified user id)... This will provide you ability to execute the BAPI offline and figure out what is happening...
Note 517767 - Generate test data for function modules
Things to look for, Is any of your custom fields quantity fields or integer?
Check out the following OSS note
Note 509898 - BAPI enhancement concept and Unicode
Also check out the following SDN Thread,
problem using BAPI_BUS2001_CREATE to create project definition
Check out a similar thread that we are discussing (for PR)
Custom Fileds Data Was Not Getting Updated In BAPI_PR_CREATE

CommandButton code does not get executed with partialSubmit=false

Following code in Jdev11g
<input type="text" value="#{myBacking.text}"/>
<af:commandButton text="Click" action="#{myBacking.doSomething}"/>
<af:commandButton text="Click" actionListener="#{myBacking.doSomethingElse}"/>
public void setText(String value)
   System.out.println("Setting value");
public String doSomething()
   System.out.println("Clicked");
    return "";
public String doSomethingElse(ActionEvent e)
   System.out.println("Clicked with event");
} I always get following output:
Setting valueI never see the output from my commandButton. It seems that my button does not executes it's code but just notifies the components to call their setters.
I notice that when i set the partialSubmit to true, de code do get executed.
Why is that and what is causing this behaviour? How can i use my own code in the buttons without setting the partialSubmit to true? I do need a complete refresh of the page and can not use the partialSubmit but when it's set to false, it ignores my code...

They are inside an af:form
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
          xmlns:f="http://java.sun.com/jsf/core"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=windows-1252"/>
<f:view>
    <af:document id="doc1">
      <af:messages id="m1"/>
      <af:form id="frm1">
           //MY buttons are here
      </af:form>

Tax is not getting calculated in shopping cart

Hi,
I have problem in shopping, whenever I am creating a shopping cart it has to add tax amount of 17.5, which is not adding the tax amount, instead it is taking tax amount as 0.00.
Tax code is V1(domestic).
Could you please guide what exactly need to be changed?
Point will be rewarded.
Cheersu2026

Hello Viv
Did you resolve this issue?
I have the same problem !
Using EEC 6 and SRM V6 (SRM 2007) (same client setup)local config is on in ECC for Brasil and tax is being calculated ok here. However although all tax codes are visible in SRM no tax is being calculated????
Any advice would be much appreciated
Rachael

Need help on getting started with shopping cart!!

hi guys,
i want to build a fairly simple shopping cart with servlets and jsps.. can you please point me to a starting point.. a tutorial or a general road map for it.. i am pretty okay with servlets and jsps and currently using them for a web-app..
any help would be greatly appreciated..thanks..

go to http://www.moreservlets.com, download the free pdf book "Core Servlets and Java Server Pages", there is a example program on section 9.4 talks about shopping cart.
Hope it helps.

On Change of Status filed as Rejected, Reason Field does not get populated

Hi,
I have issue while setting the Status field on UI.
I have created WF which gives the user an option to ACCEPT OR REJECT the work item assigned to the user.
But if the Status is REJECTED, there is another field 'REASON ',that has to be populated based on the status as 'REJECTED'.
The WF shows the status as IN PROCESS for the Step REASON once the Status is REJECTED.
The WF is getting stuck for long time and the status of the Step REASON is not getting changed to Completed.
Regards,
Tarmeem.

Hi,
Are you using the std. Task TS20000139 to populate the comments?
Is it a Dialog Task, Is it populated correctly once the Rejection button occurred. Check the binding of that Task
Regards,
Surjith

Blackberry torch does not get charged with a car adapter?

Blackberry torch 9800 gets charged from laptop and wall mount.
When I tried using thru car adapter it would not work.
I have checked the adapter, it charges the other non blackberry mobile.
My Question, do we need to have a special car adapter for blackberry touch OR
do we need to make some changes in the setup

That would be unlikely for a couple of reasons:
1. The handset is only 4 days old.
2. It charges flawlessly using the same cables on every other source - AC wall charger, laptop, PC, BB charging cradle, aan also an AC wall charger plugged into a cigarette lighter inverter! It always works in these scenarios.
The only time it fails (and quite consistently) to charge is when the charging source is a car cigarette lighter USB adapter. And it fails whether you use it in a car or with an AC wall cigarette lighter converter.
Please take a look at my other post from last night - I described all the things I tried.
If u still feel it is my handset, I would appreciate a referral to at&t. Minimally, I would like to try a new handset before replacing this one. It takes a long time to get it configured the way I want it.
Thanks,
Ashoke.

Default Value in a DFF is not getting populated in Self Service Page

I had an issue in Self Service Page.
In the SS page there is hidden mandatory field in DFF segment,which should get populated with a default select statement.
But this field is not getting populated with the default values.
But this is working fine in Forms , i.e the default value is populated in forms.
Why the default value is not populated in Self Service Pages?
For Eg: If there is a DFF "SAMPLE_DFF" which has some context with segment
Context Code : GB_CODE
Segment : "Enter the Group"
and this segment is made required and defaulted with a select stmt (select stmt returns 'XXXXX')
In forms if am not entering any value, then its defaulted to 'XXXXX'.
But in Self Service this is not happening.
Can anybody help me out...

Actually, I have narrowed down the problem. It is not quite the same.
DFF is Receivables, Address Information (Release 12). We have 2 attributes defined and we want the default value of the 2nd to be dependent on what the user selects in the 1st.
So the default value of the 2nd is defined as a SQL Statement, select :$FLEX$.INDUSTRY_CODE from dual (where INDUSTRY_CODE is the value set name from the 1st).
We know the syntax is correct because if we actually hardcode a default value in the 1st attribute (select 'BLAH' from dual), then we do see that the default value for the 2nd attribute fills in with BLAH as well. However, we do not want that. We want the user to choose a value for the 1st attribute from the LOV, and then have the 2nd attribute default to that same value. This is the part that does not seem to work in OAF, but definitely used to work in Forms.
Any thoughts?
Thanks much!

Actual GI Date not getting populated

Hi
My issue is that after the change in Fiscal Year, now in some of the STO Deliveries the Actual GI Date is not getting populated in Delivery Document, however the PGI is complete.
Any suggestion where should I look, and what may be reason / solution.
Regards
AA

AA,
What Lakshmipati has said is correct the Actual GI date does not get populated we enter it manually, only in the case if you are doing a delivery for 26th march then you can enter in Actual GI date field 26.03.2008. (at that point the Actual GI date will be empty, and you can enter the required date) This date is being taken by the material document which will be generated after performing PGI.
If you are raising the Order or STO today and you are pursuing with delivery today itself then the system willl take today's date.
Regards
Sathya

ALV Block list. Field name at user command not getting populated

Hi All,
I'm trying to use ALN block list. Field catalog is built using the REUSEALVMERGE FM.
I've put hot spot on some fields. When I'm trying to capture the data when user clicks on the hotspot field the structure that comes in the user_command subroutine is not getting populated with the fieldname. But it is getting populated with the tabname and value is also coming properly.
FORM user_command
          USING
          ucomm    TYPE sy-ucomm
                selfield TYPE kkblo_selfield.
What could be the possible reason?
I appreciate your inputs.

Hi Surya,
         Did you find the solution for this?
Best Regards.

BBP_DOCUMENT_TAB does not get populated with shopping cart

Similar Messages

Maybe you are looking for