[svn] 4834: Recompile applicationupdater_ui. swc from the AIR Integration Kit.

Revision: 4834
Author: [email protected]
Date: 2009-02-04 09:32:13 -0800 (Wed, 04 Feb 2009)
Log Message:
Recompile applicationupdater_ui.swc from the AIR Integration Kit.
The AIR Integration Kit comes with applicationupdater_ui.swc and applicationupdater_ui.swf which are built with Flex 3.1. Due to API changes in Gumbo, using applicationupdate_ui.swc as is causes a verify error. This change uses the existing source and build file from the Air Integration Kit to rebuild applicationupdate_ui.swc and applicationupdate_ui.swf.
QE Notes: None
Doc Notes: None
Bugs: SDK-18564
Reviewer: Jim
tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-18564
Modified Paths:
flex/sdk/branches/i10/frameworks/build.xml

Your problem sounds similar to this one, except that they're using software raid rather than just pure LVM. If you're using an initrd, you may not have the appropriate modules installed. If you're not using an initrd, then the kernel probably needs LVM support compiled in (not as a module) and could be solved by fixing that. I have never used the ck-patchset, but this should give you an additional data point.
Also comment=systemd.automount will be deprecated soon as I understand it; if you have a need for automounting, x-systemd.automount should be used instead.

Similar Messages

How to import the transports from the SAP Integration Kit into SAP system

Hi expert,
I read the forum "Re: Integration with SAP R/3 to realise i have not done the import of transport but i don't quite understand the statement give by "Sebastian Li".
"Unpack the SAP Integration Kit zip-file. It contains a transport-folder. Here you'll find a short manual which files you should import.
Copy the needed files on your sap-system in the correct folders:
- usr\sap\trans\cofiles
- usr\sap\trans\data
Use the transaction STMS.
Also take care of the sequence of importing. See the manual for details."
Can some one explain it in more details to me. I have unzip the SAP Integration Kit n in the transport folder got 2 more folder "ansi" and "unicode_compatible". How do i know which 1 to use? Where i should copy this files to?
Please advice.
thank you

Hi Rajesh,
check this : logon failed. you do not have the necessary rights to design reports
@Sri

Can anybody suggest a fill or method that will illustrate an acreage of trees as seen from the air, i.e., about 500-ft. up?

Can anybody suggest a fill or method that will illustrate an acreage of trees as seen from the air, i.e., about 500-ft. up?

In addition to what Jacob suggested, you could:
1) Make or find several suitable trees. Make symbols of them. Place, size and distort as desired.
2) Find a suitable aerial photo (or photos) and try Object > Live Trace to make it vector.
It all depends on the effect (and amount of realism) you are trying to achieve. If you could post a screenshot of something similar to what you want, we could give more directed suggestions.
--OB

A-Scan from the Ultrasonic Starter Kit

Hallo,
I've a problem concerning the USonic_A_scan.vi from the "Ultrasonic Starter Kit" downloadable at the VI-Website
(http://sine.ni.com/apps/utf8/niepd_web_display.display_epd4?p_guid=F248370C3F141D78E0340003BA7CCD71)
My task is to measure and detect the amplitude and delay of an
ultrasonic signal, for this purpose the functinality provided within
the "USonic_A_scan.vi" would serve perfectly, but yet I'm not able to
determine how the ampltuide measurement exactly works.
Here's my problem:
When a change the vertical position of my gates, the value returned for
the amplitude changes (The horizontal position and the width of the
gate stay constant). Why? Is there any other (comfortable) possibility
to measure the amplitude within a certain "gate"?
Thanks in advice!
Benjamin Brück

The backwall echo measured amplitude is stable WRT gate height in the example. The front wall amplitude jumps around a lot. Assuming that you are looking for a single echo then there is a lot of noise in the signal in relation to the peak detector.vi width setting. The width is set to the default value of three which means that it will look for inflections based on three sample points. If you set it to 8 then the front wall echo amplitude stabilizes, even for changes in gate height. Whether that makes sense in terms of an ultrasonic measurement is another issue as the peak detector width, the transducer frequency and the sample rate are all tied together here. The peak detector vi is not going to return the sample within the gate that has the maximum amplitude, it is going to return an interpolated value based on a curve fit over a certain number of points, where the first derivative of the fitted curve is zero, indicating an inflection.

When I connect the USB dongle from the camera connection kit I get an accessory not supported by iPad message. The card reader triggered the same msg but works now. Same msg with vga. Have tried rebooting

When I connect the USB dongle from the camera connection kit I get an accessory not supported by iPad message. The card reader triggered the same msg but works now. Same msg with vga. Others have posted this problem but the only suggestion anyone has offered is to reboot, which doesn't help. I've tried.

Thanks Fred. The nearest Apple store is about two hours away, so we did the next best thing & took it to Best Buy. It stumped the "Apple Guy" there. Apparently when an Apple product is turned on it works. Period. I'm impressed that the products are normally so dependable--it just stinks that I got the one in a million that's not. Anyway, now we wait for a service call Tuesday morning. Thanks again!

Error after uninstalling the SAP Integration Kit XI 3.0 on Unix

Hi all,
I have uninstalled the SAP Integration Kit XI 3.0 on a single solaris server installation. Uninstall was done exactly as instructed in the manual and everything looked ok.
Now when I try to go to the login page of CMC or InfoView I get an error:
type Status report
message /PartnerPlatformService/service/app/logon.do
description The requested resource (/PartnerPlatformService/service/app/logon.do) is not available.
Is the login page trying to look for the SAP authentication page that was removed ?
Is there some configuration still remaining somewhere that needs to be removed so I get the old login page back ?
Thanks for ideas, Timo

Thanks for pointing to the right direction. I changed the tomcat webapps web.xml file parameter and it was enought to start working again.
   <context-param>
        <param-name>config.logon.service.context</param-name>
        <param-value>/PlatformServices</param-value>
    </context-param>

Error with trial Installation of the BusinessObject Integration Kit for SAP

Hi
I am using the trial version of Installation of the BusinessObjects Integration Kit for SAP
while doing the installing it gives me the screen of
BW Publisher Parameter in which I need to fill the
Program ID
gateway host
gateway service
Can anyone please let me know where can I get the program id and gateway host and service
Regards
JM

Hi John,
those depend on you landscape. Take a look here:
Publishing part 1
/people/ingo.hilgefort/blog/2008/09/23/businessobjects-and-sap--publishing-of-crystal-reports-part-1-of-3
Publishing part 2
/people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-2-of-3
Publishing part 3
/people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-3-of-3
and you can also look into the Installation Guide for the SAP Integration Kit
Ingo

Chown errors from the AIR silent install

This problem only occurs on the Mac.
I am trying to run the Adobe AIR silent installer to install
my application from the command line but while it runs I get:
"chown: <filename>:Operation not permitted." The
filename are files from within the app bundle AIR creates during
installation.
It also never creates a desktop shortcut (using
-desktopShortcut) either.
Any reason why this is happening?

This problem only occurs on the Mac.
I am trying to run the Adobe AIR silent installer to install
my application from the command line but while it runs I get:
"chown: <filename>:Operation not permitted." The
filename are files from within the app bundle AIR creates during
installation.
It also never creates a desktop shortcut (using
-desktopShortcut) either.
Any reason why this is happening?

[svn:fx-trunk] 10075: Cleanups from the spark text changes and some bug fixes for VideoElement.

Revision: 10075
Author:   [email protected]
Date:     2009-09-08 18:01:58 -0700 (Tue, 08 Sep 2009)
Log Message:
Cleanups from the spark text changes and some bug fixes for VideoElement. Also some PARB changes for UIComponent.
TitleBar: Changing the skin part type from Label to Textbase
UIComponent: skipMeasure()->canSkipMeasurement() to be in line with GraphicElement. This has been PARB approved.
UIComponent: same with hasComplexLayoutMatrix...this replaces hasDeltaIdentityTransform. This has been PARB approved.
StyleProtoChain: cleanup around what interfaces to use
TextBase: clean up code that?\226?\128?\153s no longer needed.
VideoElement: Fixing 4 bugs:
SDK-22824: sourceLastPlayed keeps track of what video file we?\226?\128?\153ve called play() with last. This way if a user pauses the video and wants to start it up again at the same point, we can call play(null) on the underlying FLVPlayback videoPlayer. However, anytime the souce changes, we want to null out sourceLastPlayed. This was causing a bug when someone set the source to null and then reset it to it?\226?\128?\153s previous value.
SDK-23034 (GUMBO_PRIORITY): This deals with some FLVPlayback quirks around sizing. I had put in a fix so we weren?\226?\128?\153t setting width/height on the underlying videoPlayer too many times, but apparently we need to make sure it always gets called once. Hopefully when switching to Strobe we can cleanup this logic...I put a FIXME in to do this.
SDK-21947/ SDK-22533 - some video files don?\226?\128?\153t always send out a metadata event. I?\226?\128?\153m not quite sure why this is, but in case this happens, we do a check in the ready handler to see whether we should call invalidateSize() to make sure it gets sized properly.
QE notes:-
Doc notes:-
Bugs: SDK-22824, SDK-23034, SDK-21947, SDK-22533
Reviewer: Glenn, Corey
Tests run: checkintests, Button, GraphicTags, VideoElement, and VideoPlayer (some VideoPlayer were failing, but I think it should be fine)
Is noteworthy for integration: Yes
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22824
    http://bugs.adobe.com/jira/browse/SDK-23034
    http://bugs.adobe.com/jira/browse/SDK-21947
    http://bugs.adobe.com/jira/browse/SDK-22533
    http://bugs.adobe.com/jira/browse/SDK-22824
    http://bugs.adobe.com/jira/browse/SDK-23034
    http://bugs.adobe.com/jira/browse/SDK-21947
    http://bugs.adobe.com/jira/browse/SDK-22533
Modified Paths:
    flex/sdk/trunk/frameworks/projects/airframework/src/spark/components/windowClasses/TitleB ar.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UIComponent.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/StyleProtoChain.as
    flex/sdk/trunk/frameworks/projects/spark/src/mx/core/UITLFTextField.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/Group.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/Label.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/RichEditableText.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/RichText.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/GroupBase.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/Skin.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/TextBase.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/supportClasses/AddActionInstan ce.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/supportClasses/AnimateTransfor mInstance.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/supportClasses/RemoveActionIns tance.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/VideoElement.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/GraphicEleme nt.as

Attn: Installing the Sample Applications from the ifs Development Kit

There are a number of problems with the sample Applications included in the
Developer's kit. These need to manually fixed in order to get the demos to work.
#1: Solaris Only
The install of the iFS Development Kit, replaces the existing adk.jar with a new
one containing some additional classes. Unfortunately the install process does not
set the correct privileges on the new version of adk.jar. Please ensure that the
file $ORACLE_HOME/ifs/lib/adk.jar is world readable.
Bug # 1304730
This issue will be resolved on the next drop of the Oracle Internet File System
development kit.
#2: Generic
There is a problem with the way in which the login.jsp establishes a connection to
the repository. The current code makes incorrect assumptions about the name of the
iFS Service and the schema password.
The following changes are required.
In order to connect to the repository 4 pieces of information are required.
1. The iFS User Name
2. The iFS User's password
3. The properties file to be used
4. The database password of the user who owns the iFS Schema
The Login.jsp needs to be altered so that it requests these four arguments before
attempting to establish a connection to the repository.
(The current version only requests username and password).
All four arguments need to be provided as arguments to the login method on the
underlying JavaBean that the JSP invokes when it want to open a connection
to the repository.
***************** HERE IS THE REVISED CODE FOR INSURANCE APPLICATIONS ************
********************************** LOGIN.JSP *************************************
<%@ page import = "ifsdevkit.sampleapps.insurance.InsuranceLogin" %>
<%@ page import = "oracle.ifs.adk.security.IfsHttpLogin" %>
<html><head>
<jsp:useBean id="inslogin" scope="session" class="ifsdevkit.sampleapps.insurance.InsuranceLogin" />
<jsp:setProperty name="inslogin" property="*"/>
<%
String REDIRECT_PATH = "/public/examples/insuranceApp/claims";
boolean loggedIn = false;
if (inslogin.getSession() != null && inslogin.getResolver() != null)
// Use existing insurance login
loggedIn = true;
else
// No existing insurance login
IfsHttpLogin login = (IfsHttpLogin) request.getSession(true).getValue("IfsHttpLogin");
if (login != null && login.getSession() != null && login.getResolver() != null)
// Use existing IfsHttpLogin login
inslogin.init(login.getSession(), login.getResolver());
loggedIn = true;
if (!loggedIn)
String username = request.getParameter("username");
String password = request.getParameter("password");
String serviceName = request.getParameter("serviceName");
String schemaPassword = request.getParameter("schemaPassword");
if (username != null && password != null &&
!username.trim().equals("") && !password.trim().equals(""))
// Login using username/password
try
if (serviceName == null | | serviceName.trim().equals(""))
serviceName = "IfsDefault";
inslogin.init(username, password, serviceName, schemaPassword);
request.getSession(true).putValue("IfsHttpLogin", inslogin);
loggedIn = true;
catch (Exception e)
%>
<SCRIPT LANGUAGE="JavaScript1.2">
alert("The username or Password was not valid, please try again.");
</SCRIPT>
<%
if (loggedIn)
// Redirect to the directory where the claim files reside
response.sendRedirect(REDIRECT_PATH);
else
%>
<title>Insurance Demo App Login</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</head>
<body bgcolor="#FFFFFF">
<form METHOD=POST NAME="loginform" ACTION="login.jsp">
<table>
<tr>
<td><b>Username:</b></td>
<td><input type="text" name="username" value=""></td>
</tr>
<tr>
<td><b>Password:</b></td>
<td><input type="password" name="password" value=""></td>
& lt;/tr>
<tr>
<td><b>Service Name:</b></td>
<td><input type="text" name="serviceName" value="IfsDefault"></td>
</tr>
<tr>
<td><b>Schema Password:</b></td>
<td><input type="password" name="schemaPassword" value=""></td>
</tr>
<tr>
<td> </td>
<td> </td>
</tr>
<tr>
<td>
<input type="submit" value="Log in">
</td>
<td>
<input type="reset" value="Reset">
</td>
</tr>
</table>
</form>
</body>
</html>
<% } %>
*************************** END INSURANCE LOGIN.JSP ******************************
This code has been changed so that it requests the four agruments that are required
to connect to the repository and passes them to the login method on the underlying
bean. Note that we have provided the complete source code to this file in order to
make it simple to deploy the revised version of the code. Simply cut and paste this
code into a new file called login.jsp. Copy the File into the iFS
repository folder /ifs/jsp-bin/ifsdevkit/sampleapps/insurance.
****************************** INSURANCELOGIN.JAVA *******************************
package ifsdevkit.sampleapps.insurance;
* Copyright (c) 2000 Oracle Corporation. All rights reserved.
import java.util.Locale;
import javax.servlet.http.HttpSessionBindingEvent;
import oracle.ifs.beans.DirectoryUser;
import oracle.ifs.beans.FolderPathResolver;
import oracle.ifs.beans.LibrarySession;
import oracle.ifs.beans.LibraryService;
import oracle.ifs.common.CleartextCredential;
import oracle.ifs.common.ConnectOptions;
import oracle.ifs.common.IfsException;
import oracle.ifs.adk.security.IfsHttpLogin;
* The login bean for the Insurance demo app.
* <p>
* This class provide the login info. The class implements the
* <code>IfsHttpLogin</code> interface so it can share login data with other
* login beans.
* @author Edward Yu
* @version 1.0
* @see IfsHttpLogin
public class InsuranceLogin implements IfsHttpLogin
* The <code>LibrarySession</code>.
private LibrarySession m_session;
* The <code>FolderPathResolver</code>.
private FolderPathResolver m_resolver;
* Default constructor required by the jsp spec for the USEBEAN tag
* @exception IfsException
public InsuranceLogin()
throws IfsException
* Make a connection to iFS
* @param username The username to be used for login.
* @param password The password to be used for login.
* @param serviceName The service name to be used for login.
* @param schemaPassword The schema password to be used for login.
* @exception IfsException if operation failed.
public void init(String username, String password, String serviceName,
String schemaPassword)
throws IfsException
LibraryService service = new LibraryService();
CleartextCredential me = new CleartextCredential(username, password);
ConnectOptions connection = new ConnectOptions();
connection.setLocale(Locale.getDefault());
connection.setServiceName(serviceName);
connection.setServicePassword(schemaPassword);
m_session = service.connect(me, connection);
m_resolver = new FolderPathResolver(m_session);
m_resolver.setRootFolder();
DirectoryUser user = m_session.getDirectoryUser();
if (user.isAdminEnabled())
m_session.setAdministrationMode(true);
* Initialize the login bean.
* <p>
* The default constructor does not set the necessary fields so it needs
* to be set instantiation.
* @param session The <code>LibrarySession</code> object.
* @param resolver The <code>FolderPathResolver</code> object.
public void init(LibrarySession session, FolderPathResolver resolver)
m_session = session;
m_resolver = resolver;
* Return the login's session object.
* @return The <code>LibrarySession</code> object.
public LibrarySession getSession()
return m_session;
* Return the login's path resolver.
* @return The <code>FolderPathResolver</code> object.
public FolderPathResolver getResolver()
return m_resolver;
* Called when this object is bound to the HTTP session object.
* @param event The event when the object is bound to the Http session.
public void valueBound(HttpSessionBindingEvent event)
// do nothing
* Called when this object is unbound from the HTTP session object.
* @param event The event when the object is unbound to the Http session.
public void valueUnbound(HttpSessionBindingEvent event)
m_resolver = null;
try
if (m_session != null)
m_session.disconnect();
catch (IfsException e)
e.printStackTrace();
finally
m_session = null; // release the resources
*****************************END INSURANCELOGIN.JAVA ******************************
This code has been changed so that it accepts the four agruments that are required
to connect to the repository and uses them to connect to the repository. Note that
we have provided the complete source code to this file in order to make it simple
to deploy the revised version of the code. Simply cut and paste this
code into a new file called. Save the file on the native file system
in a file called InsuranceLogin.java in the directory
$ORACLE_HOME/ifs/ifsdevkit/sampleapps/insurance/
*************** HERE IS THE REVISED CODE FOR WEB COMMAND APPLICATIONS ************
********************************** LOGIN.JSP *************************************
<%@ page import = "ifsdevkit.sampleapps.webcommandapp.WebCommandLogin" %>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<meta name="Author" content="Patricia Li">
<title>Login</title>
</head>
<jsp:useBean id="wclogin" scope="session" class="ifsdevkit.sampleapps.webcommandapp.WebCommandLogin" />
<jsp:setProperty name="wclogin" property="*"/>
<%
String REDIRECT_PATH = "/ifs/ifsdevkit/sampleapps/WebCommandApp/html/main.html";
boolean loggedIn = false;
if (wclogin.getSession() != null)
// Use existing WebCommand login
loggedIn = true;
else
String username = request.getParameter("username");
String password = request.getParameter("password");
String serviceName = request.getParameter("serviceName" );
String schemaPassword = request.getParameter("schemaPassword");
if (username != null && password != null)
// Login to iFS
try
wclogin.init(username, password, serviceName, schemaPassword);
request.getSession(true).putValue("IfsHttpLogin", wclogin);
loggedIn = true;
catch (Exception e)
%>
<SCRIPT LANGUAGE="JavaScript1.2">
alert("The credentials are not valid; please try again.");
</SCRIPT>
<%
if (loggedIn == true)
// Go to main page...
response.sendRedirect(REDIRECT_PATH);
else
%>
<title>Web Command App Login</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</head>
<body bgcolor="#FFFFFF">
<h2>WebCommand Application Login</h2>
<form METHOD=POST NAME="loginform" ACTION="login.jsp">
<table>
<tr>
<td><b>Username:</b></td>
<td><input type="text" name="username" value=""></td>
</tr>
<tr>
<td><b>Password:</b></td>
<td><input type="password" name="password" value=""></td>
</tr>
<tr>
<td><b>Service Name:</b></td>
<td><input type="text" name="serviceName" value="IfsDefault"></td>
</tr>
<tr>
<td><b>Schema Password:</b></td>
<td& gt;<input type="password" name="schemaPassword" value=""></td>
</tr>
<tr>
<td> </td>
<td> </td>
</tr>
<tr>
<td>
<input type="submit" value="Log in">
</td>
<td>
<input type="reset" value="Reset">
</td>
</tr>
</table>
</form>
</body>
</html>
<% } %>
************************* END WEB COMMAND LOGIN.JSP ******************************
This code has been changed so that it requests the four agruments that are required
to connect to the repository and passes them to the login method on the underlying
bean. Note that we have provided the complete source code to this file in order to
make it simple to deploy the revised version of the code. Simply cut and paste this
code into a new file called login.jsp. Copy the File into the iFS repository folder
/ifs/jsp-bin/ifsdevkit/sampleapps/WebCommandApp
****************************WEBCOMMANDLOGIN.JAVA**********************************
package ifsdevkit.sampleapps.webcommandapp;
import java.util.Locale;
import oracle.ifs.beans.DirectoryUser;
import oracle.ifs.beans.FolderPathResolver;
import oracle.ifs.beans.LibrarySession;
import oracle.ifs.beans.LibraryService;
import oracle.ifs.common.CleartextCredential;
import oracle.ifs.common.ConnectOptions;
import oracle.ifs.common.IfsException;
import oracle.ifs.adk.filesystem.IfsFileSystem;
import oracle.ifs.adk.security.IfsHttpLogin;
import javax.servlet.http.HttpSessionBindingEvent;
* WebCommand application that illustrates the usage of the
* File System API.
* @version 1.0
* @pub
public class WebCommandLogin implements IfsHttpLogin
private LibrarySession m_session; // Session
private FolderPathResolver m_resolver; // Resolver
private IfsFileSystem m_ifs; // File System object
* Default constructor required by the jsp spec for the USEBEAN tag
public WebCommandLogin()
throws IfsException
* Make a connection to iFS
* @pub
public void init(String username, String password, String serviceName,
String schemaPassword)
throws IfsException
LibraryService service = new LibraryService();
CleartextCredential cred = new CleartextCredential(username, password);
ConnectOptions options = new ConnectOptions();
options.setLocale(Locale.getDefault());
options.setServiceName(serviceName);
options.setServicePassword(schemaPassword);
m_session = service.connect(cred, options);
m_resolver = new FolderPathResolver(m_session);
m_resolver.setRootFolder();
m_ifs = new IfsFileSystem(m_session);
DirectoryUser user = (DirectoryUser) m_session.getDirectoryUser();
if (user.isAdminEnabled())
m_session.setAdministrationMode(true);
* Use the existing connection.
* The default constructor does not set the necessary fields.
* @pub
public void init(LibrarySession session, FolderPathResolver resolver)
throws IfsException
m_session = session;
m_resolver = resolver;
m_ifs = new IfsFileSystem(m_session);
* Return the login's session
* @pub
public LibrarySession getSession()
return m_session;
* Return the login's path resolver
* @pub
public FolderPathResolver getResolver()
return m_resolver;
* Return the IfsFileSystem API object
* @pub
public IfsFileSystem getIfsFileSystem()
return m_ifs;
* Implementation of valueBound
* @pub
public void valueBound(HttpSessionBindingEvent e)
* Implementation of valueUnbound
* @pub
public void valueUnbound(HttpSessionBindingEvent e)
try
m_session.disconnect();
catch (IfsException ie)
************************* END WEBCOMMANDLOGIN.JAVA *******************************
This code has been changed so that it accepts the four agruments that are required
to connect to the repository and uses them to connect to the repository. Note that
we have provided the comple te source code to this file in order to make it simple
to deploy the revised version of the code. Simply cut and paste this code into a
new file called WebCommandLogin.java in the directory
$ORACLE_HOME/ifs/ifsdevkit/sampleapps/webcommandapp/
Compile the java class.
Copy the classfile to $ORACLE_HOME/ifs/custom_classes/ifsdevkit/sampleapps/webcommandapp/
Stop and Start all of the protocol servers.
This issue will be resolved on the next drop of the Oracle Internet File System
development kit.
#3. Making the BaseRendererClass available to the Protocol Servers
Note this step is not required if you have the 1.0.8.3 patch set installed.
Install the BaseRenderer Class. The BaseRenderer class is delivered in the jar file
ifsdevkit.jar and can be used to simplify the task of creating a custom renderer.
Unfortunately the jar file containing this class is not referenced in any of the Classpaths
used by the iFS protocol servers. This means that they will not be able to load any
customer renderers that extend BaseRenderer. In order to make BaseRenderer available
to the Protocol Servers it need to be placed in the appropriate directory under
<ORACLE_HOME>/ifs/custom_classes.
Extract the class from the ifsdevkit.jar.
ifsdevkit.jar is located in <ORACLE_HOME>/ifs/lib after the devkit has been installed.
jar -xvf ifsdevkit.jar
extracted: META-INF/MANIFEST.MF
extracted: BaseRenderer.class
Create the following directory heirachy in <ORACLE_HOME>/ifs/custom classes
oracle/ifs/server/renderers
Copy <ORACLE_HOME>/ifs/lib/BaseRenderer.class to
<ORACLE_HOME/ifs/custom_classes/oracle/ifs/server/renderers
That should do it.
Regards
Mark D. Drake
null

Moving to Top

What adapter do i need for thailand from the world adapter kit

HI,DOES ANYONE KNOW WHAT ADAPTER I NEED FOR THAILAND FROM THE APPLE WORLD ADAPTER KIT?????

Try the one that fits.
Please use mixed case for posts. All caps is the equivalent of shouting.

How do you update the SAP Integration Kit license?

When your SAP Integration Kit license has expired, how do you update it?
For example : In designer, not being able to create OLAP universes on SAP BW anymore.
Thank you,
Raphaë

Hi Ingo
do you know, I,ve tried to put in the licens key in CMC for int.kit that I got from SAP self and also another from the marketplace page.
I getting message:
Currently held license keys (Select a key to see its licensing information)
License Key Error: Invalid Key : <my key>
There is no license added for int.kit in CMC right now, do I need to have it?
Reason to this is that we got some connection error: "The specific module could not be found" and error "WIS 10901"
This after Infoview and "refresh data"
From my opinion I would guess that this is licens problem?
Can you please help us?
regards Jacob

Unable to connect my I-phone 4S via wifi from the Air-port express even though the signal is good and all my other devices (macBook air and speakers) are working properly? Already tried to change the channels on the Airport but still nothing.

Since I've instaled the Airpor express, everithing connected to it works properly, My wifi network signal is good and I able to browse with my mac air, bu with my I-phone 4S even though the signal apears to be good and on the it shows is connected to my wifi network I can't open any web-site, instead I keep getting the same message: "Cannot Open Page - Safari could not open the page because the server stopped responding.", wich is not true because I'm connected with my lap-top. The sound wifi system works perfectly but reggarding the wifi on my 4S I've tried changing through different chanels on the Airport (I saw people were having the same problem and aparently by changing the channels on the Airport the internet on the phone worked properly, but I'm still stuck with a brand new I-phone unable to opem my pages) I've also tried changing the Radio modes and still nothing.
Any suggestions?

Since I've instaled the Airpor express, everithing connected to it works properly, My wifi network signal is good and I able to browse with my mac air, bu with my I-phone 4S even though the signal apears to be good and on the it shows is connected to my wifi network I can't open any web-site, instead I keep getting the same message: "Cannot Open Page - Safari could not open the page because the server stopped responding.", wich is not true because I'm connected with my lap-top. The sound wifi system works perfectly but reggarding the wifi on my 4S I've tried changing through different chanels on the Airport (I saw people were having the same problem and aparently by changing the channels on the Airport the internet on the phone worked properly, but I'm still stuck with a brand new I-phone unable to opem my pages) I've also tried changing the Radio modes and still nothing.
Any suggestions?

How to play video from the air to my tv?

whats the easiest way to connect my airbook to a tv

Or a Mini DisplayPort | Thunderbolt® to HDMI® Adapter w/ Audio Support

Extras from the Rack Mount Kit

With the XServe rack mount kits sending us parts for both the shallow and deep racks, is there something we can do with all the extra parts we do not use? Does apple have a recycle/reuse for them or do we just send them down to the local recycler along with the soda cans from install night?
I also keep thinking there has to be some good use for that large white plastic shipping cover that comes on the XServe but we only have so many doors needing propped open.
Any suggestions?

Your local Apple Authorized Service Provider would probably love them! If you gave them to him free, he would be your new best friend, and you would strike up a relationship with someone who may work with you when it comes time to procure new hardware.

[svn] 4834: Recompile applicationupdater_ui. swc from the AIR Integration Kit.

Similar Messages

Maybe you are looking for