BCB Admin or CRMM_BCB_ADM

Hello,
Does anyone know if the configuration information held in BCB Admin (Java stack) is the same via transaction CRMM_BCB_ADM (ABAP stack) for CTI setup using ICI?
Kind Regards,
Heber Olivar

Hi Glenn,
I don't want to use the CMSS (Communication Management Software Simulator), but just set up the ICI using only the ABAP stack of CRM. I already have experience in setting up ICI interface to SAP BCM using only the ABAP stack via the transaction CRMM_BCB_ADM, but I'm looking at the CTI Altitude and CTI Ericsson documentation and the configuration instructions are via BCB Admin (Java stack). I need undestand if the BCB Admin only facilitates the configuration and offers the simulator of the ICI and if I can use the normal configuration of the connection via SM59 and CRMM_BCB_ADM using just the ABAP stack.
Thanks,
Heber Olivar

Similar Messages

BCB/ICI Version Upgrade from 3.00 to 3.02 on CRM

Dear Sir/ Ma'am,
Presently our DEV CRM J2EE engine is on BCB/ICI version 3.00.64507 and we would like to upgrade to version BCB/ICI 3.02 for Free Seating Functionality in CRM Server.
Can you please provide the information for upgrading of this ICI version 3.0 to 3.2 or any latest version. Also, appreciate, if could
proivide any SAP document/Notes or link.
An early reply would be appreciated.
Thanks!
Best Regards,
Gunveen

Hello
Please, check [SAP Note 1268057|https://service.sap.com/sap/support/notes/1268057]
Since CRM5.0, the ICI is implemented by non-java option (ABAP). Basically, non-java option means MCM/BCB/ICI code in CRM server is on ABAP (including how to configure the connection to the simulator via transaction CRMM_BCB_ADM).
Other related application, such as CCSUI, is a java application but it has nothing to do with setting up the connection via the bcb setting when we run non-java.
So, it means, IC Web client/CRM uses the ABAP stack to implement ICI features, so you don't need to care about BCB Admin for java.
Another important feature is that as of ICI 3.02, the WSDL files are generated automatically, you don't have to generate them manually.
I hope this info helps
Joaquin

The BCB/ICI veision about CRM 2007 J2EE engine

Hi,everyone :
    I don't install the java WAS . So could anyone who installed the CRM 2007 J2EE engine tell me the BCB/ICI veision .Thanks .
    The url is like this :
http://<server>:<port>/bcb/bcbadmStart.jsp
    click 'System Information'.
Thanks very much.

Hello
Please, check [SAP Note 1268057|https://service.sap.com/sap/support/notes/1268057]
Since CRM5.0, the ICI is implemented by non-java option (ABAP). Basically, non-java option means MCM/BCB/ICI code in CRM server is on ABAP (including how to configure the connection to the simulator via transaction CRMM_BCB_ADM).
Other related application, such as CCSUI, is a java application but it has nothing to do with setting up the connection via the bcb setting when we run non-java.
So, it means, IC Web client/CRM uses the ABAP stack to implement ICI features, so you don't need to care about BCB Admin for java.
Another important feature is that as of ICI 3.02, the WSDL files are generated automatically, you don't have to generate them manually.
I hope this info helps
Joaquin

Open and connect in OBI 11.1.1.5 admin tool fowwoling OBE Upgrade

I installed OBI11.1.1.5 on Redhat 5.2 and the admin tool on a windows. In this two machine I have OBI 10 server and admin tool installed as well. The OBI 11 components are all up running as I can access them such as EM and represention service.
Following OBEhttp://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/bi11115/upgrade/upgrade_to_11g.htm?print=preview#t3 .I upgraded our 10g rpd and catalog and see the repository saved in instance_home, and verified that the default is RPD sh20110903_BI002.
Next step in the OBE, I verify Reposiotory Metadata. I launched the admin tool, opened inline. In the generated dialog box, I entered the password in defined in the update script as Repository Password, and used weblogic login in User/Password. All other fields are blank. That is all I can do in the dialog box, but the Open buttone is always grey. I think at least one available repository should be listed in the list box at the bottom, but it was empty.
Then I tried to create a new repository. In step 2 Select Data Source, I choose ODBC 3.5 and use a valid system DSN, but got Error : The connection has failed.
I tried also use Connection Type OCI 10g/11g. IN the Data Source Name I used a valid netservice name defined in a Oracle client's Oracle_HOME. But still got Error : The connection has failed.
Questions
1) How can make the Open button active in the Open inline RPD dialog box?
2) Why the valid System DSN failed to connect in 11g admin tool. It is OK in 10g admin tool and ODBC configure
3) How to make Admin Too; sees the tnsnames definition. Should I copy the tnsnames.ora file to somewhere under Admin Tool installation directory?
Many thanks.

Thanks. The post appares make sense. I opened my user.sh file and has 2 questions:
1) There are 32bit section and 64 bit section, and it states that 32 bit server must work with 32 bit client, so is for 64 bit. In my case, the clients are most likely 32 bit windows (browsers and admin tool), but the server is installed on Redhat 64 bit. Is this a problem? How do I know if my OBIEE iis running 64 or 32 bit?
2) All entries in the user.sh file are commented out. Then what file is used to in the current OBI11, it is started automatically after the installation.

Report printing failure when not logged on as admin

Using Business object XI, I have a VB 2005 .NET app that works fine when logged on with admin privileges, but fails otherwise. I've investigated and traced this down a single line of code which is the rep.PrintOut function.
The debug error report is shown at the end of this message.
Can anyone suggest a solution to this issue? Is it just a permissions problem and if so what permissions are required?
Thanks,
Steve
System.Runtime.InteropServices.COMException (0x80047E5D): Failed to open the connection.
   at CRAXDRT.ReportClass.PrintOut(Object promptUser, Object numberOfCopy, Object collated, Object startPageN, Object stopPageN)
   at WinLabel.Form1.PrintManifestLabels(String strCust)
   at WinLabel.Form1.Button1_Click(Object sender, EventArgs e)
   at System.Windows.Forms.Control.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ButtonBase.WndProc(Message& m)
   at System.Windows.Forms.Button.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

Hello Steve,
Thanks for the feedback. Since this appears to be a permissions issue there's one other thing to check. When the merge modules are installed there's often an option to install for "me" or for "everyone." Make sure the files are being deployed for everyone.
Here are links to some RDC and .NET documents as well as the Statement of Direction for the RDC. I'm not sure if you'll actually be able to pull them up though. Some documents require a login for the Service Market Place in order to view them. Hopefully these will work without logging in.
[Using the Report Designer Component in Microsoft Visual Studio .NET|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0751a7f-a81d-2b10-55a0-e6df0e1bab6d]
[SAP Note 1217809 - Is the Report Designer Component supported in the .NET development environment?|https://bcp.wdf.sap.corp/sap/sapnotes/display/0001217809]
[Crystal Reports Report Designer Component - Statement of Direction|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80bd35e5-c71d-2b10-4593-d09907d95289]
I hope you're able to track down the permissions issue!
Sincerely,
Dan Kelleher

Multiple users under my name, can I transfer files/data onto just one user account if I have an external H.D. when I tried to delete info off one of the accounts it said I did not have permission? I assume I was in an account that was not admin.

I noticed I have set up 4 Admin user accounts under my own name with diff. variations as seen in the attchment. Some have a diff. password to log on to which I am able to do. This computer is used for my business and I need info that is scattered on the other 3 accounts to be in/on ONE admin account.
I don't know how i ended up with multiple accounts. Maybe due to having two 24" iMacs and multiple iPhones & iPad2 for me and family.
I use this computer for business and personal.
Due to multiple Admin user accounts I have important info scattered on the other accounts resulting in some accounts have some of the info to others having much more but not ALL. Some accounts have from a couple hundred songs, podcasts, etc. etc. to a few 1,000 on another Admin account.
I want to consolidate ALL of my info, files. songs, podcasts, pictures & email etc. into one Admin account and delete the other accounts to reduce confusion.
I was told by my local Apple authorized service shop that it is not easy but moving most of the info is possible. Their caveat was email would probably not be able to be moved other than forwarding each email I wanted out of each account and opening in the account I wanted to consolidate into.
As a side note, I get an error message at times saying that I do not permission/authority to delete / move files? What might be the issue when I encounter this type message?
Thanks for any help.
Bob

Have a read here Transferring files from one User Account to another
Stefan

Error while opening central admin link after power pivot uninstall sp 2010?

Error while any link opened in the cental admin
example:http://server:port/_admin/WebApplicationList.aspx
Required permissions cannot be acquired.
ULS log when Config wizard ran
An exception of type System.IO.FileNotFoundException was thrown. Additional exception information: Could not load file or assembly 'Microsoft.AnalysisServices.SharePoint.Integration, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91'
or one of its dependencies. The system cannot find the file specified.
System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.AnalysisServices.SharePoint.Integration, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.
File name: 'Microsoft.AnalysisServices.SharePoint.Integration, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91'
   at System.RuntimeTypeHandle._GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, Boolean loadTypeFromPartialName)
   at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
   at System.RuntimeType.PrivateGetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark)
   at System.Type.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase)
   at Microsoft.SharePoint.PostSetupConfiguration.ReflectionHelper.InvokeConstructor(String assemblyQualifiedName, Type[] constructorSignature, Object[] constructorParameters)
   at Microsoft.SharePoint.PostSetupConfiguration.TaskCommon.ReflectionHelperInvokeConstructor(String assemblyQualifiedName, Type[] constructorSignature, Object[] constructorParameters, TaskBase task)
the error same as the below article:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/7a06ebc8-ad8f-4b76-bc44-a8171fde6816/absolutely-sick-of-powerpivot-the-product-stinks-failed-to-find-assembly?forum=sqlkjpowerpointforsharepoint
but any of the sollution did not work.
Thanks
Ravi
Ravi

I have uninstalled power pivot now the central adminlinks are working.
but when i run configuration wizard it pups with error:
Could not load file or assembly 'Microsoft.AnalysisServices.SharePoint.Integration'
Can i delete follwoing key in the registery?
The follwoing article asked to remove the key:
http://social.technet.microsoft.com/Forums/en-US/487f18d4-32cf-4056-a6de-433f69bb7470/configuration-wizard-failed-to-find-assembly
my registry entry
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS\ServiceProxies\Microsoft.AnalysisServices.Sharepoint.Integration.EngineServiceProxy]
"AssemblyQualifiedName"="Microsoft.AnalysisServices.Sharepoint.Integration.EngineServiceProxy, Microsoft.AnalysisServices.SharePoint.Integration, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"
"ServiceProxyName"="MSOLAP$POWERPIVOT"
Ravi

Error in creating a new user in j2ee 14 admin console

Hi,
I am getting the following error while trying to create a new user using the j2ee 1.4 admin console.:
A "com.sun.enterprise.tools.guiframework.exception.FrameworkError" was caught. The message from the exception: "Unable to get View for ViewDescriptor 'fileUsers'"
The root cause is "java.lang.ArrayIndexOutOfBoundsException: 0"
Plz proide me with solutions
Regads,
Tanmoy

This problem wil happen only if you've created a user with an empty group id, and this issue is fixed for FCS .
You have two workarounds to use adminGUI for managing users:
1. Use CLI, and create a group id to this user, then you can use adminGUI.
2. Other option is remove the empty group id user from domain.xml, and then you can come back to adminGUI to create the user with some group id. I prefer the 1st option.

Error while deploying .par file through system admin

I have tried to modify logon.par file but when I was try deploy that file again through system admin then I got this error...................
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
com.sapportals.portal.ume.component.logon.SAPMLogonComponent.
Exception id: 10:19_11/05/07_0006_13454550
See the details for the exception ID in the log file
Please help me out I am using sneak preview 7.0
Detailed Error Log & Trace
=========================================================
Exception ID:08:55_11/05/07_0002_13454550
[EXCEPTION]
com.sapportals.portal.prt.component.PortalComponentException: Error in init method
Component : com.sap.portal.support.browse.default
     at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:251)
     at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:267)
     at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:312)
     at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:385)
     at com.sapportals.portal.prt.connection.PortalRequest.getRootContext(PortalRequest.java:435)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:607)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sapportals.portal.prt.core.broker.PortalComponentInstantiationException: Could not instantiate implementation class com.sapportals.portal.ume.component.logon.SAPMLogonComponent of Portal Component com.sap.portal.support.browse.default because: Could not find implementation class
     at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:242)
     at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getComponentInstance(PortalComponentItemFacade.java:160)
     at com.sapportals.portal.prt.core.broker.PortalComponentItem.getComponentInstance(PortalComponentItem.java:732)
     at com.sapportals.portal.prt.component.PortalComponentContext.getComponent(PortalComponentContext.java:103)
     at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:242)
     ... 26 more
Caused by: java.lang.ClassNotFoundException: com.sapportals.portal.ume.component.logon.SAPMLogonComponent
Found in negative cache
Loader Info -
ClassLoader name: [com.sapportals.portal.prt.util.ApplicationClassLoader@3389d1]
Parent loader name: [com.sapportals.portal.prt.util.ApplicationClassLoader@1b7a6fa]
References:
   not registered!
No resources !
     at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:360)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:219)
     at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:228)
     ... 30 more

Hi,
      Open ur PAR file then double click on PORTAL-INF -> lib->Select 2 jar files
         1.com.sap.portal.runtime.logon_api.jar
         2.umelogonbase.jar
Copy those jar file & paste in to lib in ur application.
Regards,
Senthil kumar K.

How do I create admin console users with full access to configuration and the directory in every instance?

I want to be able to create directory user ID for the iPlanet administrators. They should be able to access the admin console and all the instances created. They should be able to configure each instance and directory. I was able tocreate Admin Server Administrators but they were only able to modify the directory(tab) and not the configurations(tab). Any help would be greatly appreciated!
Thanks.
Keith

Hi Keith,
In o=netscaperoot, edit the static group called cn=Configuration Administrators, ou=Groups, ou=TopologyManagement, o=NetscapeRoot - this group contains the admins peer to your config admin. Since the console is quirky and doesn't let you add in users not in netscaperoot, just click advanced and put in the full dn of whoever you want in by hand, e.g., uid=scarter, ou=people, dc=mydomain,dc=com as a static member. then rebind to the console with the full dn and passwd, and away you go :)
james

Error while reading the PO in the Backend system. Inform system admin

Hi All,
We are having a peculiar issue of 'Error while reading the PO in the Backend system. Inform system admin'.
The P.O is in ordered status in SRM but the same is not getting transferred to backend ECC system.
No error messages or logs in RZ20, SLG1 any where.
All programmes like BBP_GET_STATUS_2 and CLEAN_REQREQ_UP are running fine.
Tried pushing the P.Os manually using function module (BBP_PD_PO_TRANSFER_EXEC_V2) to backend ECC.
It was working fine till a week ago and suddenly this problem is coming.
We had implemented few OSS notes suggested by SAP for the issue of 'shopping carts appearing in sourcing cockpit even after P.O creation' in both development and test system.
Now this issue is coming up in test system where as development system is working fine.
Please let us know where to look and how to resolve this issue.
A quick response would be highly appreciated.
Regards,
Teja

I am facing the same issue with one PO in the Production system.
SRM 5.0 , R/3 4.6C Extended classic scenario.
I checked the status of other PO's created today. I see them in R/3. There is one PO which was created a week back which shows up as "ordered" in SRM but the PO is missing in R/3. When clicked on the details on the web, system throws the error
Error while reading the PO in the Backend system. Inform system admin.
Message no. BBP_CF010
I checked RZ20, SLG1 no errors were found. I checked RFC connection, it was working fine too.
I tried pushing the PO using the FM BBP_PD_PO_TRANSFER_EXEC, it did not solve the problem.
In SRM WEBGUI Process PO - Item data -->follow on documents --> PO status is shown as Archived.
Any inputs would be greatly appreciated. Please throw some light on this issue.
Krishna

Read Only Admin Console

Hey,
Has anyone found a way to add further restrictions to users logged in to the Admin Console based on membership to a Group? Restricting them to specific Menu Items is taken care of, but I'd like to be able to prevent them from editing anything in the Manage Users section.
Ideally they would be able to view the user details page and user resources, but not be able to change them in any way. At the same time I'd like to filter out certain user fields from displaying (for instance, the person's SSN).
Is there any way to do this outside of front-end customization? This is using OIM 9.1.0.0.

If I understood your qurey correctly... try changing the property of the user filed in FormMetaData.xml to readonly. By this you just display the fileds but are not editable.

Badi for contact person creation of isa user admin

Hi fnds,
I am creating a new custom field on isa user admin app of b2b. Now when i create a contact, the FM CRM_ISA_UA_IUSER_CREATE is been called. I am planning to pass this custom value to extension table of this FM.
Now can u tell me a badi which triggers, so that i can use the extension table values and save it to the contact person details in the database?
I am looking for a badi to save this custom value to contact person BP .
thanks in advance,
Niraja

HI Niraja,
Thanks for the useful information that itself has partially solved my querry, along with this I am in need of one more clarification from you and that is while creating user from ISA user management how can i modify it to add a standard user alias field, like u said I have created one custom field in ISA user mangement, can u please share it so that I can enhace the ISA user mangement to have one standard field(user alias).
Thanks and Regards,
Mayank
Edited by: mayank Choudhary on Jul 10, 2009 2:09 PM

How to reset password of a local admin in window 8.1

Hi, I have a window 8.1 machine with only a local admin user. Accidentally, the user id got locked due to three incorrect attempts and not i cannot get in to the machine. To reset the password, i tried to use the password reset USB from other machine as
i cannot create from the same machine but it didn't work. I also tried to change the password through command prompt but
Please suggest how I can reset the Password or unlock the userID of the local admin user.
Thanks,
Kunal
KC

Hi,
A locked-out account cannot be used until it is reset by an administrator or until the lockout duration for the account has expired.
If you remember the password,you may type the password after the lockout duration for the account has expired.
If you forget the password,please refer to the link below:
http://windows.microsoft.com/en-us/windows/what-do-forget-windows-password#1TC=windows-8
Regards,
Kelvin hsu
TechNet Community Support

Remote Server Admin not working from outside of network for 1 server

Our company recently changed ISPs and I had to change our two 10.4 server's IP addresses. We have a mail server (intel xserve) and a file/web server (quicksilver g4). Both servers have two network cards in them. The problem is two-fold:
1- I can successfully manage the Xserve machine locally on our network and from my home. However, I can only manage the Quicksilver g4 server locally. Any kind of external access is not even acknowledged.
2- I'm not sure if I missed any steps when changing IP addresses for these server-based computers. Also, I'm not sure if I correctly set our dns names to the correct IP address.
For some background, this is the exact IP update process I used for each server:
Quicksilver G4 (file/web server) - Installed network card #2 and configured it with the new Public IP in the "System Preferences/Network" panel. In Server Admin I set our website to use the new public IP address. (network card #2 has no firewall device in between it and the internet.)
Then, I configured the default network card #1 to a static, yet private IP address that's behind our DLink firewall device with the rest of our network.
Intel Xserve (e-mail server) - Network card #1 was the only one setup before our network change. It had a static, public IP address. When we changed ISPs, I configured network card #2 to the new static, public IP address supplied to us by the new ISP in the "System Preferences/Network" panel. This new IP address is where all email traffic currently gets pointed to. (All mail is successfully sent and delivered.) Until our former ISP gets shutdown, I still have network card #1 configured to the older static public IP address. After the old ISP is shut off, I plan on changing network card #1 to a static, private address.
Any assistance would be greatly appreciated.
Mac OS X (10.4.8)

What should I check in AD? I am by no means an expert with AD.
Yes, I am using the same client OS.
I am talking about RDP over the internet, like from home to the office. We have a static IP assigned to the router from ISP. A static internal IP assigned to the server on the LAN. And the router port forwards 3389 to the assigned IP.
It was working fine before we reinstalled Server 2012. These are the steps I took when reinstalling:
1. format drive and install OS
2. rename the server
3. install SQL server
4. Install TFS and SharePoint
5. Add Active Directory role and promote to Domain Controller
6. Add domain users
7. Enable remote access on the server and add users to remote access list

BCB Admin or CRMM_BCB_ADM

Similar Messages

Maybe you are looking for