BCM4322 wireless weird burst behaviour.

I have a Dell studio xps 1340, with the BCM4322 wireless card. Everything work fine with the broadcom-wl driver, however, I seem to get this weird burst behaviour. By this I mean, my network connection seems to be available for only 1-2 seconds before it cuts off and then reactivates another 1-2 seconds later.
I'm running KDE 4.5 using the networkmanager plasmoid. Here is a screenshot of said behaviour:
Can anyone explain to me why this is happening and if I can fix it in any way?
Last edited by nan (2010-10-12 00:43:54)

I've switched to wicd and everything seems to be fine now... Sometimes I get a random disconnect but it's pretty rare.

Similar Messages

[solved] laptop - weird keyboard behaviour

Hello,
since upgrading to kernel 3.2.1.1 (same with 3.2.1.2) I have a weird keyboard behaviour.
I have to press ESC to leave this weird mode.
This problem is similiar to
https://bbs.archlinux.org/viewtopic.php?id=86026
Do some people have the same problem?
My laptop is Dell Vostro 1310.
// ok... this never was a kernel software issue
// my keyboards shift was just a bit... loosely
Last edited by xinit (2012-04-26 19:09:04)

same for me, for about one week, on 2 different systems. I'm using KDE4 but some other people reported this problem on Gnome too. It generally stops when I strike the key again a few times.
It happened when I showed someone how cool Linux was, and then it opened 60 occurences of the same images I wanted to cut and paste...
Last edited by farvardin (2009-12-03 20:22:14)

Alien Remote Desktop and wireless weirdness

I have been having intermittent connectivity problems with my MB the past couple days at the office. Airport shows full power connected to my Belkin WEP-protected wireless router. However, when I try to get online I get a spinning beachball and "server can't be found." Then, other times it works OK. If I move out of my office to another part of the office building the problem usually goes away.
Here's the 1st weird thing: all the other Macs in the office work fine, including a mini that is 10 feet away from my MB. Internet browsing is fast and uninterrupted.
2nd weird thing: under "Shared" on my sidebar there are two screen icons with names like "ubuadm's remote desktop." I do not have Remote Desktop turned on on any of my computers. There are lots of wireless locations listed under the Airport icon when I click on it, so I know my office neighbors have devices on. My questions: Is someone possibly getting into my computer (firewall is on)?? Or, am I just getting interference from one of my neighbors? What can I do to remedy this situation? Thanks!

I found, menu Setup: uPnp. Add a Service Management item.

[SOLVED] BCM4322 Wireless

I am running a macbook pro 5.5 with the broadcome BCM4322 card. I can't seem to get my card to have any connectivity. I have spent time searching google and wikis with no luck. I have installed the broadcom-wl module via yaourt, blacklisted ssb and b43. I have wl showing when listing the loaded modules. I believe this is the same module I used and had it working with prior to this upgraded installation. If you have any insight or recommended direction for a solution, please help!
[ss7@myhost ~]$ lspci | grep Network
03:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)
[ss7@myhost ~]$ lsmod | grep wl
wl 1944142 0
lib80211 3942 2 wl,lib80211_crypt_tkip
[ss7@myhost ~]$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:26:BB:0A:F7:E5
inet6 addr: fe80::226:bbff:fe0a:f7e5/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:23
eth1 Link encap:Ethernet HWaddr 00:26:B0:DF:E6:84
inet addr:192.168.2.133 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::226:b0ff:fedf:e684/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:8266 errors:0 dropped:0 overruns:0 frame:0
TX packets:9589 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4992108 (4.7 Mb) TX bytes:1268942 (1.2 Mb)
Interrupt:27 Base address:0xa000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
[ss7@myhost ~]$ iwconfig
lo no wireless extensions.
eth0 IEEE 802.11 Nickname:""
Access Point: Not-Associated
Link Quality:5 Signal level:0 Noise level:0
Rx invalid nwid:0 invalid crypt:0 invalid misc:0
eth1 no wireless extensions.
[ss7@myhost ~]$ iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
eth1 Interface doesn't support scanning.
rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
HARDWARECLOCK=""
TIMEZONE="America/New_York"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(lib80211_crypt_tkip wl !b43 !ssb)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="myhost"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng dbus hal network netfs crond)
Cheers,
Sam
Last edited by ss7 (2010-06-24 18:02:47)

I don't have any hardware keys to turn off wireless with the mac and I haven't installed any such software on the system directly unless it was due to dependencies.. dmesg did report eth0 as belonging to the wireless card. I did not see any other indications of error.
dmesg is posted at:
http://tinypaste.com/da368
Sam

Weird JFrame behaviour in 1.4.1

I have an application that runs fine under 1.4.0. It has a main JFrame where most of the action happens, but from time to time, it wants to display another JFrame, which is hassle-free under 1.4.0.
Under 1.4.1, the main JFrame is fine, but the second JFrame only semi-displays, and I've tried to figure it out, but nothing I'm trying is helping. You can see a small part of the top left-hand corner of the frame, and you can see its edges, and you can click on the menu bar, which will popup the menu items, which are functional. The rest of the frame looks like whatever is behind it: if you drag it around, the copied background moves around too, but if you drag it partially offscreen, then when you drag it back, it contains sort of skidmarks or smears (stuff that was at the visible edge, smears).
I'm at a loss as to what could be causing this weird behaviour, and would appreciate any insights or clues as to how to (continue to) go about fixing it.
Thanks
Charlene Abrams
Tripos, Inc
St Louis, MO

Then maybe you have some code that is catching an exception and ignoring it.
Do you have any empty catch clauses?
catch (SomeEvent e) { }

Weird keyboard behaviour in TTY

Good evening,
I just reinstalled Arch Linux on a VPS and I am experiencing some weird behaviour.
I created the Arch Image on my local machine and when it was setup with the most basic features I did send it to the VPs company for them to run.
When I connect to this new install with putty over SSH everything is going fine and my keyboard works.
However when I connect via putty to the 'lights out' service of this VPS and thus reach some kind of TTY environment the keyboard behaviour is totally different! I do not mind that my arrows do not work, or that all the F keys are giving me weird characters. But the most annoying of all is that my Return key (or enter how you want to call it) does print the first character of the command I just typed and does a line break. It is incredibly weird and thus I made you guys a photo.
As you can see when I type uptime then the U is displayed on a new line and nothing happens. If I hit return again then the system will say that the command U does not exists.
However if you continue typing as you can see in the second example then in the end you do get what you want. As you can imagine this is not what should happen.
/etc/vconsole.conf
KEYMAP=uk
FONT=Lat2-Terminus16
FONT_MAP=
I also tried to enable keymap in the hooks of mkinitcpio.conf but this did not make any difference. I am not sure if the keymap is the problem, if I load it manually it also does not make any difference to the TTY.
Yet again, via SSH nothing is wrong and all works fine. However when I connect with putty to the 'lights out' service then it goes wrong.
Does anybody have an idea what is going on?
Edit:
Added thumbnail image. Sorry Inxsible
Last edited by ruurdkrekt (2013-04-11 20:39:13)

jacobopantoja wrote:
ruurdkrekt wrote:Good evening,
When I connect to this new install with putty over SSH everything is going fine and my keyboard works.
However when I connect via putty to the 'lights out' service of this VPS and thus reach some kind of TTY environment the keyboard behaviour is totally different!
What I understand is that you are having no problems with SSH, but you are having with PuTTY. Is that right? If so, try playing with PuTTY's settings.
I do use putty to connect to SSH and to the 'lights out'-service of the VPS the arch install is hosted. So in my opinion in both cases it should work the same. However the 'lights out'-service looks as if you are directly connected to the machine via a keyboard and monitor. You also will see all the boot information and the services being started. When it is done booting it will display the login view. I believe you call all of what I just explained a TTY, am I correct?
So if I use putty to connect to these services how come the SSH version works but the 'lights out'-version does not?

Behringer FCA202 - weird metronome behaviour

Hi,
I could get my hands on a Behringer FCA202 firewire audio interface for a real nice price. It works fine, except for 1 thing: when I switched on the metronome - no sound! Now the weird thing: after I created an audio track and a bus with reverb, I heard my metronome, but with LOTS of reverb. So, I looked into the Environment: ahhhh... the Klopfgeist channel strip has it's output set to Bus1. That explained the weirdness! So, I changed the output to Output 1-2, and saved this as a new template. But... if I open this template, The Klopfgeist channel strip's output is set to Bus1 again.... WEIRD!
Now, it's not a disaster to go to the Environment and change Bus1 to Output1-2, but if there's a trick to prevent this behaviour, I'd like to know....
For your info: until now, I simply used the iMac's built in audio input/outputs, and the metronome behaved the way it should.
Anyone have a clue??
Thanks!
Regards,
Jaap

Hi MigCla,
Unplug everything except your magsafe from your macbook.
Try to boot into safe mode by booting and press shift key, repair your permission by opening application folder > utilities > disk utility > repair disk.
And reconnect that firewire card afterward, and re-set up if it shows back up in audio/midi set up.
If your Firewire card have any driver that comes with, re-install it or check their sites for newer driver if available.
Good Luck.

Weird Oracle behaviour (insert)

hi there,
I experience this weird behaviour whith an oracle jdbc-conection:
( Class.forName ("oracle.jdbc.driver.OracleDriver");
conn = DriverManager.getConnection
("jdbc:oracle:thin:@machine:port:database","bla", "bla");)
If I insert a few rows in a table, close the statement and do an commit() (autocommit is false) and close the connection, the data is NOT in the database.
and now comes the funny part:
IF I FORCE AN EXCEPTION AFTER INSERT AND BEFORE COMMIT,
THE DATA IS IN THE DATABASE !!!
code:
if (conn.isReadOnly()) {
     conn.setReadOnly( false );
conn.setAutoCommit(false);
p1 = inhalt.indexOf("\n");
PreparedStatement pstmt = conn.prepareStatement(sql);
while (p1 >= 0) {
zeile = inhalt.substring(0,p1);
inhalt = inhalt.substring(p1+1);
pstmt.setString(1,datei);
pstmt.setString(2,zeile);
i1 = pstmt.executeUpdate();
logIt("vms.machmal:doLoad:ergebnissql #"+i1+"#");
p1 = inhalt.indexOf("\n");
} // end while
pstmt.close();
// if I force e.g. a nullpointer-exception here, the data is in the database...
conn.commit ();
erg = 0;
fehlertext = "Datei "+datei+" geladen";
catch(Exception e)
e.printStackTrace();
     erg = -1;
     fehlertext = "Fehler beim Laden der Datei "+datei+": "+e.getMessage();
finally {
lServletDlgView.setRc(""+erg);
lServletDlgView.setHinweis(fehlertext);
return erg;
Is this a bug?
please,please, help me!
thanks a lot in advance,
frank

So perhaps there's anybody out there who knows the
oracle driver....?This is my reasoning:
- I have used the oracle driver successfully.
- And probably a lot of other people have used it successfully as well.
- Throwing an exception does not impact the driver.
When I have a situation that seems impossible I usually find it is because I have made an assumption that is wrong. Which is why I say "examine your assumptions."
For example I once spent quite a bit of time, at least several hours, trying to figure out why the data that I was inserting into a database wasn't getting into the database. I had many logs. And I tried various scenarios to reduce the code and running the SQL directly in the gui for the database. The results that I was seeing was simply not possible.
I finally realized that the code was running against a different database than the one I was looking at.

Weird Photoshop behaviour- becomes unresponsive

I'm having a weird behaviour with Photoshop CS4. Sometimes when I have some other application or applications open. I will be unable to use any of the menus of photoshop. If i close some of my applications and then restart Photoshop then it will work. It seems like a memory management issue. Anybody else has this problem?

Update CS4 to 11.0.1?
Buy and install more RAM.
Don't have so many other applications running in the background.
Go to MSconfig, startup and turn off items that you do not need running will help too. You can always start them manually.
mikelovem wrote:
I'm having a weird behaviour with Photoshop CS4. Sometimes when I have some other application or applications open. I will be unable to use any of the menus of photoshop. If i close some of my applications and then restart Photoshop then it will work. It seems like a memory management issue. Anybody else has this problem?

Memory timings, weird bios behaviour, frustration...

Hi.
I recently bought a MSI 875P mobo, a P4c 2.4GHz to go with it and also 2x512MB Kingston HyperX PC3200 memory.
First thing I did was flash the bios to the newest version (1.8), which, after reading things from another thread might not have been such a great idea after all.
Seems that the CAS latency setting in the bios does not do anything. No matter if its set to 2, 2.5 or 3, CPU-Z always shows 2. Also, im getting quite frustratign results when overclocking with this mobo, no matter how much voltage I give to the memory (I have tried as much as 3,2v) whenever the memory bus is over 200MHz the system wont be stable. It seems as if the memory voltage setting doesnt do anything, as it doesnt matter if its set to 2.5 or 3.2 it wont be any more or less stable. (I know over 200MHz is over spec for this memory but the mem is supposed to do alot better than that, especially when increasing the voltage.) Also even with low memory speeds im unable to get the CPU to go very high... it does 3GHz (250MHz FSB) fine with default core voltage, but anything above that wont be stable no matter what CPU core voltage I use. Could be my CPU, but I suspect the motherboard to be the reason with so many faults already.
Theres also some weird behaviour by the bios I have seen. For example, sometimes the AGP/PCI divider has three settings (66,75,83MHz) and sometimes it allows me to set the frequencies by 1MHz steps, but still so that there is no 66MHz setting at all, just 67 - 83MHz and one extra setting which gets adjusted as I adjust the FSB. Also, sometimes when I try to go into the BIOS setup, I only get a black screen. This often happens if I press some other key (for example tab) before pressing del during POST. weird and extremely annoying.
Is there any hope that issues such as these would be resolved in a future bios update? I'm a little frustrated after setting up this system with watercooling etc. and now being stuck with this motherboard doing weird things and certainly not being a good mobo for overclocking!
In case these issues wont be solved in the near future, I will propably switch to another brand motherboard... Anyone reading these boards with good experience from other manufacturers, preferably similar boards as the 875P in terms of features (wanted ones)?
any help appreciated (preferably from someone from MSI),thanks.

Quote
Originally posted by DOS
If you set any performance setting other than Slow the memory timings are set for you. If you want to overclock to 3G set the ram voltage to max 2.8, set the performance mode to Slow (bad term - is should be 'Normal'), set the DRAM clock to 333 (this will run the ram at 320 when FSB is at 200, also referred to as 5:4 ratio), set your FSB to 250. This will clock the ram at 400. You should be able then go further.
This is what I have done, the performance setting is set to slow, and even right now I have CAS 3 set in the bios but cpu-z still shows its using CAS 2. Using 333MHz DRAM clock with 250MHz FSB is stable at all default voltages, but anything above those wont work, no matter what voltages. If I set the FSB to 255, it wont be stable anymore, not even with 1.7v vcore and 3.3v memory voltage. Even setting the DRAM clock to 266MHz wont be stable with 255FSB. Also, running a lower FSB with a higher memory clock, so that the FSB is lower but memory goes above 200MHz wont be stable no matter what.

Xen dom0 kernel and weird LUKS behaviour

Hi all,
I am having weird behaviour with fresh Xen dom0 kernel and LUKS. Both Xen kernel come from AUR. No errors during kernel compilation or initramfs generation. While booting, system asks for password to encrypted LVM, using normal kernel (2.6.33-ARCH x64) I enter the password - everything is ok. But while booting Xen kernel, kernel says that password is wrong. After entering it 30 times I sure that I didn't make any mistake ;-)
Any ideas what is happening ?

Partially solved. I connected PS/2 keyboard and it worked. But why USB keyboard works on non-Xen kernel ? Any one knows how to make password visible while typing it at boot time ? It might help finding out what's wrong.

Touch 2.0 & Win XP wireless & weird behavior HELP

Hello
So, I bought into all the Apple ads (& even bought Apple stock) and have signed on to the phenomenon, but I am not happy.
Apple! Listen up:
I have a new 32Gig Touch installed on a FRESH copy of Win XP (the most stable OS I have ever used, having built many systems). iPod software 1.4.XX worked seamlessly. However, since "upgrading" to 2.0 to the tune of $10 it has been VERY frustrating:
1. I cannot connect wirelessly, as others have reported. I have tried putting a "$" in front of my WEP key to no avail. PRIOR TO 2.0, I was able to connect effortlessly, so this is clearly a 2.0 problem and Apple's failure to troubleshoot this thoroughly.
2. ALSO: when the iPod Touch is communicating wirelessly (even though it doesn't connect to the internet) my PC slows to a crawl. Specifically, my mouse movement is fragmented and slow & the PC is essentially useless. I also get some sort of registry error when booting up.
3. When connected via USB and turned on (syncing) I get humming noises from the PC. Really strange.
Keep in mind this is a fresh XP install with little to no apps running. When I shut the Touch off, my PC performance increases to normal (even if the Touch is not connected).
As Apple expands its base across platforms as part of it corporate strategy, it must continue to deliver the exceptional ease of use and performance that has defined its existence. Alas, it seems that Apple has stumbled on this 2.0 release. My new MacBook arrives Tuesday. If I cannot resolve these issues, then I may just keep the MacBook sealed and return it and stick to the PC world, where I at least know how to troubleshoot these types of things.
I would appreciate ANY suggestions from other users out there. I searched the forums and tried what I could before posting.
Thanks for your help, Borderline Apple Convert

On follow up:
It seems the slow mouse and performance is related to the wireless on the Touch. Turning it off seems to resolve the problem. Furthermore, using a wired USB mouse rather than a wireless one also seems to fix the issue. I also turned off the wireless on the Touch.
As for the wireless connection, it is definitely connected. It seems to work for a second then drops. For instance, I was able to add 1 city to the weather but then it timed out when adding the second. One web page will come up and then the next one will stall.
I think I might go back to 1.1.4 or 5 and see if I can get my wireless performance back.
Any other suggestions appreciated. Thx.

[JS CS3] Weird grouping behaviour

Hi, I am facing a weird trouble.
Assuming mypicgp may be either a ungrouped pageitem or a group,
mybtn is a button, mylabel a textframe.
i mypage.groups.add([mypicgp,mybtn,mylabel]);
line works fine if mypicgp is ungrouped object. It creates a group.
If mypicgp is a group of pictures, the script fails but as weird as it is, a group is created anyway looking to what I want to get.
BUT it seems it duplicates the button and the label. So my final group is made of mypicgp (the primary group), 2x mybtn & 2x mylabel.
Any idea what's wrong ?

If the array contains references to words in a document and you close that document then the document no longer exists and so neither do the words. So the error is no surprise.
Dave

Weird X behaviour since last update

Ever since my last update, Xorg has been acting weird with text selection.
The problem in detail: sometimes when I select text on a website or in my terminal, the text will not stay highlighted but the selection will instantly disappear - the contents however have been copied to the clipboard. Very irritating. Another very annoying thing is, that X sometimes thinks I double clicked on a word and will instantly highlight the word. If I try to shake that off by clicking somewhere else, that will be be highlighted instead.
My X.Org Server version is 1.8.1.902 on Arch64.
What could be the problem here?

I am having them, currently to fix it i just turn the phone off and turn it back on. Sometime that works for a day, sometimes 2. But until i know there is a problem(usually when i see the light flashing that I have a text or missed call, yet there was no ring or alarm ) there is nothing to do, unless, and I am going to try it tonight, turn it off and on before bed and again when i wake up.

Weird LOV behaviour - delay when go_block,go_item

Hi,
I have a lov and after the user selects a value I go to another block and execute a query. Problem is that after I check the return value of show_lov and find it true, it takes some 3-4 secoonds for the code to execute if it had a go_item or go_block statement.
To understand it better:
a := SHOW_LOV('LOV_ALL_EMP');
IF a = TRUE THEN
IF HERE I PUT A GO_ITEM OR GO_BLOCK STATEMENT (WHICH IS NEEDED TO EXECUTE QUERY THEN) I TAKE A 3 SECOND DELAY FOR SOME REASON (ONLY AT THE FIRST GO_BLOCK OR GO_ITEM IF I HAVE 2 OR MORE I GET THE DELAY ONLY AT THE FIRST. OTHER STATEMENTS DONT STUCK.
ELSE
IF USER DOES NOT SELECT A VALUE DELAY DOES NOT OCCUR EVEN IF I USE GO_BLOCK
END IF;
To put it more generally:
When I execute a the first GO_ITEM or GO_BLOCK statement AFTER the call of a LOV it seems to stuck for a little.. Even if statement refers to the block already focused. Also for the delay to occur, user have to select a value from LOV i.e. if user does not select a value (and show_lov returns false) this delay does not happen. Why?
Any ideas on this strange behaviour please?
regards,
teo

Well Steve,
seems it's something like that. What I did is to check if it is the same on other PCs in here and it is the same, but unfortunatelly I wouldnt have the opportunity to check it on an OS other than XP home. Laptop I use for testing over the Web has Win 2000 but I use PSTN there so speed is totally different and I can't tell if there's a difference.
Anyway I really don't have too much time to lose on that (it seems tricky) and moreover I don't think I'm using LOV in this case cause UI seems too poor for my requirements so I'll do a 'LOV' by myself.. So I will abandon this although its interesting. If later on I find anything else or be able to test it on another OS I'll get back on this post.
I really appreciate your interest.
For the history:
Forms 9i on AS9i
Win XP Home on which lies the AS9i (same used as a client)
DB server 9i on other PC in the LAN

BCM4322 wireless weird burst behaviour.

Similar Messages

Maybe you are looking for