BDC for existing record in table control

Hi,
I have a requirement to change existing records in table control through BDC. Is there any way I can choose the respective record from Table Control through BDC dynamically.
Regards
Akash

/J4I/015PER, this transaction is used for adding permits to Operation in WEC. It has list of operations in Table Control. Permit can be added for choosing the operation from table control.
Our custom program is designed to add permits for the operation. So if I have to use the above transaction for adding permits, then first I have to choose the correct operation from the table control and then add permit.

Similar Messages

How to append parameter with URL for each record in table control?

Hi,
I have one table control which contains 5 columns.
(tripno, startdate, destination, reason, activities)
In 5th column, i need to display URL for each record.
for ex:
www.abc.com/test?tripno=1
www.abc.com/test?tripno=2
www.abc.com/test?tripno=3
when user clicks a particular hyperlink, it navigates to another page/component thru URL with one key field(tripno) to retrieve related records in next page.
1) i am not able to assign tripno to each record. when i assign tripno, its taking the last value which i assigned. ie. tripno=3 only.
How to assign URL to Reference field of LINK_TO_URL element at run time?
OR
2) we can do like this.
Simply assign url to reach record without key field.
www.abc.com/test
www.abc.com/test
www.abc.com/test
when user clicks a particular link, we can assign corresponding key field to the URL.
Where should i write this event? Bcoz, LINK_TO_URL doesnot have event.
how to do?

Hi MOg.
Not sure whether I understand you .. but in the 5th column you want to have the reference URL. Is this the activities columen from you example?
Nevertheless, you need a attribute (String) in your context node which contains the URL. Bind this to the reference filed of linktourl. If you can not extend the structure you can create a sub node (cardinality 1:1) which contains the refernce attribute.
Then loop over all elements and concatenate www.abc.com/test?tripno= with the tripno of the current element into the reference field.
Hope tis helps,
Sascha.
Bind the

The PAI Event Code to search for a record in Table Control

Logic
1. I have a position button and entry text field (search content) for a table control in my screen. Position button has the function code 'PBUT'.
2. Content of table control will be in an internal table. The entry text field is to be used for positioning.
3. I enter the search (key) field in text field & Click the position button.
4. The PAI event of button click (Module user_command) of that screen is as under.
Case sy_ucomm.
When 'PBUT'.
What will be the code to bring the row as selected in table control, that I have to write here, for this case-value.
Endcase.
Regards,

Hi Alok,
Excuse me, couldn`t catch u yesterday. Ok i`ve the code which will set the cursor on the selected entry.
Reward points if convinced.
*& Report Y131_TC_TEST *
REPORT y131_tc_test NO STANDARD PAGE HEADING.
TABLES: vbak.
DATA : BEGIN OF str_tc,
 vbeln LIKE vbak-vbeln,
 erdat LIKE vbak-erdat,
 END OF str_tc,
 it_tc LIKE TABLE OF str_tc WITH HEADER LINE,
 loopc LIKE sy-loopc,
 flag,
 lin TYPE i.
CONTROLS : my_tc TYPE TABLEVIEW USING SCREEN 9000.
CALL SCREEN 9000.
*& Module STATUS_9000 OUTPUT
* text
MODULE status_9000 OUTPUT.
* SET PF-STATUS 'xxxxxxxx'.
* SET TITLEBAR 'xxx'.
IF it_tc[] IS INITIAL.
 SELECT vbeln erdat INTO TABLE it_tc UP TO 10
 ROWS FROM vbak.
 DESCRIBE TABLE it_tc LINES lin.
 my_tc-top_line = loopc.
ENDIF.
ENDMODULE. " STATUS_9000 OUTPUT
*& Module USER_COMMAND_9000 INPUT
* text
MODULE user_command_9000 INPUT.
CASE sy-ucomm.
 WHEN 'EXIT'.
 LEAVE PROGRAM.
 WHEN 'PBUT'.
**** Now this event is triggerred when the user uses the ****Position Push button to locate the field value.
 CALL SCREEN 9001 STARTING AT 10 15.
ENDCASE.
ENDMODULE. " USER_COMMAND_9000 INPUT
*& Module USER_COMMAND_9001 INPUT
* text
MODULE user_command_9001 INPUT.
CASE sy-ucomm.
 WHEN 'OKAY' OR ' ' or 'EXIT'.
**** When the user selects values from the search help on **** position button, the itab is read and index is *****assigned
 READ TABLE it_tc WITH KEY vbeln = vbak-vbeln.
 IF sy-subrc = 0.
 loopc = sy-tabix.
 flag = 'X'.
**** the cursor is set here
 my_tc-top_line = loopc.
 SET SCREEN 0.
 LEAVE SCREEN.
 ENDIF.
ENDCASE.
ENDMODULE. " USER_COMMAND_9001 INPUT
*& Module STATUS_9001 OUTPUT
* text
MODULE status_9001 OUTPUT.
SET PF-STATUS 'MODAL'.
* SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_9001 OUTPUT
Regards

Problem in modifying the existing record in table control

Hi Experts,
I have one table control.I have entered one record and save it.When I am modifying the same record a duplicate record is created.I need if I modify the same record that record should only modify.How to delete the duplicate record.

Hi,
In Flow logic.
LOOP .
MODULE tbc_modify ON CHAIN-REQUEST.
MODULE tbc_mark.
ENDLOOP.
In module.
MODULE tbc_modify INPUT.
MODIFY t_data
    FROM fs_data
   INDEX tbc-current_line.
IF sy-subrc NE 0.
    APPEND fs_data TO t_data.
ENDIF.
ENDMODULE.
MODULE tbc_mark INPUT.
DATA: tbc_wa2 LIKE LINE OF t_data.
IF tbc-line_sel_mode = 1
AND fs_data-mark = 'X'.
    LOOP AT t_data INTO tbc_wa2
     WHERE mark = 'X'.
      tbc_wa2-mark = ''.
      MODIFY t_data
        FROM tbc_wa2
        TRANSPORTING mark.
    ENDLOOP.                          .
ENDIF.
MODIFY t_data FROM fs_data
    INDEX tbc-current_line
    TRANSPORTING mark.
ENDMODULE.
Edited by: sapabap403 on Aug 31, 2011 9:29 AM

How can we do the validation for non visible records in table control.

Hi Experts,
I have a table control which displays list of material details. I have a button to upload the material details from excel file to table control directly. I have to validate all the customers which are exist in the table. But my item (Material) table control displays only 5 rows i.e only 5 entries are visible in module pool screen. The validation is done for 5 records only in PAI event, but i need to do validation for rest of the records too (Which are not visible on items table), if validation fails then needs to display error message.
How can we do the validation for non visible records in table control.
Regards,
Bujji

Hi,
try validating material before displaying it in table control...'
Rgds/Abhhi

Hi All, Pls send me the recording for va01 by handling table control

Hi All, Pls send me the recording for va01 by handling table control with 3 or more materials. Pls send me a flat file and code ASAP.
Thanks&regards.
Bharat

Here is a example of similar kind ..plz go through this doc..it will be help hul 4 u
How to deal with table control / step loop in BDC?
Steploop and table contol is inevitable in certain transactions. When we run BDC for such transactions, we will face the situation: how many visible lines of steploop/tablecontrol are on the screen? Although we can always find certain method to deal with it, such as function code 'NP', 'POPO', considering some extreme situation: there is only one line visible one the screen,
our BDC program should display an error message. (See transaction 'ME21', we you resize your screen to let only one row visible, you can not enter mutiple lines on this screen even you use 'NP')
Now, I find a method with which we can determine the number of visible lines on Transaction Screen from our Calling BDC program. Maybe it is useless to you, but I think it will give your some idea.
Demo ABAP code has two purposes:
1. how to determine number of visible lines and how to calculte page number; (the 'calpage' routine has been modify to meet general purpose usage)
2. using field symbol in BDC program, please pay special attention to the difference in Static
ASSIGN and Dynamic ASSIGN.
Now I begin to describe the step to implement my method:
(I use transaction 'ME21', screen 121 for sample, the method using is Call Transation Using..)
Step1: go to screen painter to display the screen 121, then we can count the fixed line on this screen, there is 7 lines above the steploop and 2 lines below the steploop, so there are total 9 fixed lines on this screen. This means except these 9 lines, all the other line is for step loop.
Then have a look at steploop itselp, one entry of it will occupy two lines.
(Be careful, for table control, the head and the bottom scroll bar will possess another two fixed lines, and there is a maximum number for table line)
Now we have : FixedLine = 9
LoopLine = 2(for table control, LoopLine is always equal to 1)
Step2: go to transaction itself(ME21) to see how it roll page, in ME21, the first line of new page is always occupied by the last line of last page, so it begin with index '02', but in some other case, fisrt line is empty and ready for input.
Now we have: FirstLine = 0
or FirstLine = 1 ( in our case, FirstLine is 1 because the first line of new page is fulfilled)
Step3: write a subroutine calcalculating number of pages
(here, the name of actual parameter is the same as formal parameter)
global data: FixedLine type i, " number of fixed line on a certain screen
LoopLine type i, " the number of lines occupied by one steploop item
FirstLine type i, " possbile value 0 or 1, 0 stand for the first line of new
" scrolling screen is empty, otherwise is 1
Dataline type i, " number of items you will use in BDC, using DESCRIBE to get
pageno type i, " you need to scroll screen how many times.
line type i, " number of lines appears on the screen.
index(2) type N, " the screen index for certain item
begin type i, " from parameter of loop
end type i. " to parameter of loop
*in code sample, the DataTable-linindex stands for the table index number of this line
form calpage using FixedLine type i (see step 1)
LoopLine type i (see step 1)
FirstLine type i (see step 2)
DataLine type i ( this is the item number you will enter in transaction)
changing pageno type i (return the number of page, depends on run-time visible line in table control/ Step Loop)
changing line type i.(visible lines one the screen)
data: midd type i,
vline type i, "visible lines
if DataLine eq 0.
Message eXXX.
endif.
vline = ( sy-srows - FixedLine ) div LoopLine.
*for table control, you should compare vline with maximum line of
*table control, then take the small one that is min(vline, maximum)
*here only illustrate step loop
if FirstLine eq 0.
pageno = DataLine div vline.
if pageno eq 0.
pageno = pageno + 1.
endif.
elseif FirstLine eq 1.
pageno = ( DataLine - 1 ) div ( vline - 1 ) + 1.
midd = ( DataLine - 1 ) mod ( vline - 1).
if midd = 0 and DataLine gt 1.
pageno = pageno - 1.
endif.
endif.
line = vline.
endform.
Step4 write a subroutine to calculate the line index for each item.
form calindex using Line type i (visible lines on the screen)
FirstLine type i(see step 2)
LineIndex type i(item index)
changing Index type n. (index on the screen)
if FirstLine = 0.
index = LineIndex mod Line.
if index = '00'.
index = Line.
endif.
elseif FirstLine = 1.
index = LineIndex mod ( Line - 1 ).
if ( index between 1 and 0 ) and LineIndex gt 1.
index = index + Line - 1.
endif.
if Line = 2.
index = index + Line - 1.
endif.
endif.
endform.
Step5 write a subroutine to calculate the loop range.
form calrange using Line type i ( visible lines on the screen)
DataLine type i
FirstLine type i
loopindex like sy-index
changing begin type i
end type i.
If FirstLine = 0.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loopindex gt 1.
begin = Line * ( loopindex - 1 ) + 1.
end = Line * loopindex.
if end gt DataLine.
end = DataLine.
endif.
endif.
elseif FirstLine = 1.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loop index gt 1.
begin = ( Line - 1 ) * ( loopindex - 1 ) + 2.
end = ( Line - 1 ) * ( loopindex - 1 ) + Line.
if end gt DataLine.
end = DataLine.
endif.
endif.
endif.
endform.
Step6 using field sysbol in your BDC, for example: in ME21, but you should calculate each item will correponding to which index
form creat_bdc.
field-symbols: <material>, <quan>, <indicator>.
data: name1(14) value 'EKPO-EMATN(XX)',
name2(14) value 'EKPO-MENGE(XX)',
name3(15) value 'RM06E-SELKZ(XX)'.
assign: name1 to <material>,
name2 to <quan>,
name3 to <indicator>.
do pageno times.
if sy-index gt 1
*insert scroll page ok_code"
endif.
perform calrange using Line DataLine FirstLine sy-index
changing begin end.
loop at DataTable from begin to end.
perform calindex using Line FirstLine DataTable-LineIndex changing Index.
name1+11(2) = Index.
name2+11(2) = Index.
name3+12(2) = Index.
perform bdcfield using <material> DataTable-matnr.
perform bdcfield using <quan> DataTable-menge.
perform bdcfield using <indicator> DataTable-indicator.
endloop.
enddo.
Sample code
Following is a sample code of handling table control in BDC.
REPORT Y730_BDC5 .
*HANDLING TABLE CONTROL IN BDC
DATA : BEGIN OF IT_DUMMY OCCURS 0,
DUMMY(100) TYPE C,
END OF IT_DUMMY.
DATA : BEGIN OF IT_XK01 OCCURS 0,
LIFNR(10) TYPE C,
BUKRS(4) TYPE C,
EKORG(4) TYPE C,
KTOKK(4) TYPE C,
NAME1(30) TYPE C,
SORTL(10) TYPE C,
LAND1(3) TYPE C,
SPRAS(2) TYPE C,
AKONT(6) TYPE C,
FDGRV(2) TYPE C,
WAERS(3) TYPE C,
END OF IT_XK01,
BEGIN OF IT_BANK OCCURS 0,
BANKS(3) TYPE C,
BANKL(10) TYPE C,
BANKN(10) TYPE C,
KOINH(30) TYPE C,
LIFNR(10) TYPE C,
END OF IT_BANK.
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
IT_BDCMSGCOLL LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = 'C:\VENDOR.TXT'
FILETYPE = 'ASC'
TABLES
DATA_TAB = IT_DUMMY.
LOOP AT IT_DUMMY.
IF IT_DUMMY-DUMMY+0(2) = '11'.
IT_XK01-LIFNR = IT_DUMMY-DUMMY+2(10).
IT_XK01-BUKRS = IT_DUMMY-DUMMY+12(4).
IT_XK01-EKORG = IT_DUMMY-DUMMY+16(4).
IT_XK01-KTOKK = IT_DUMMY-DUMMY+20(4).
IT_XK01-NAME1 = IT_DUMMY-DUMMY+24(30).
IT_XK01-SORTL = IT_DUMMY-DUMMY+54(10).
IT_XK01-LAND1 = IT_DUMMY-DUMMY+64(3).
IT_XK01-SPRAS = IT_DUMMY-DUMMY+67(2).
IT_XK01-AKONT = IT_DUMMY-DUMMY+69(6).
IT_XK01-FDGRV = IT_DUMMY-DUMMY+75(2).
IT_XK01-WAERS = IT_DUMMY-DUMMY+77(3).
APPEND IT_XK01.
ELSE.
IT_BANK-BANKS = IT_DUMMY-DUMMY+2(3).
IT_BANK-BANKL = IT_DUMMY-DUMMY+5(10).
IT_BANK-BANKN = IT_DUMMY-DUMMY+15(10).
IT_BANK-KOINH = IT_DUMMY-DUMMY+25(30).
IT_BANK-LIFNR = IT_DUMMY-DUMMY+55(10).
APPEND IT_BANK.
ENDIF.
ENDLOOP.
LOOP AT IT_XK01.
REFRESH IT_BDCDATA.
perform bdc_dynpro using 'SAPMF02K' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RF02K-REF_LIFNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02K-LIFNR'
IT_XK01-LIFNR.
perform bdc_field using 'RF02K-BUKRS'
IT_XK01-BUKRS.
perform bdc_field using 'RF02K-EKORG'
IT_XK01-EKORG.
perform bdc_field using 'RF02K-KTOKK'
IT_XK01-KTOKK.
perform bdc_dynpro using 'SAPMF02K' '0110'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-TELX1'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFA1-NAME1'
IT_XK01-NAME1.
perform bdc_field using 'LFA1-SORTL'
IT_XK01-SORTL.
perform bdc_field using 'LFA1-LAND1'
IT_XK01-LAND1.
perform bdc_field using 'LFA1-SPRAS'
IT_XK01-SPRAS.
perform bdc_dynpro using 'SAPMF02K' '0120'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-KUNNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-KOINH(02)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
DATA : FNAM(20) TYPE C,
IDX TYPE C.
MOVE 1 TO IDX.
LOOP AT IT_BANK WHERE LIFNR = IT_XK01-LIFNR.
CONCATENATE 'LFBK-BANKS(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKS.
CONCATENATE 'LFBK-BANKL(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKL.
CONCATENATE 'LFBK-BANKN(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKN.
CONCATENATE 'LFBK-KOINH(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-KOINH.
IDX = IDX + 1.
ENDLOOP.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-BANKS(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPMF02K' '0210'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-FDGRV'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFB1-AKONT'
IT_XK01-AKONT.
perform bdc_field using 'LFB1-FDGRV'
IT_XK01-FDGRV.
perform bdc_dynpro using 'SAPMF02K' '0215'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-ZTERM'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0220'.
perform bdc_field using 'BDC_CURSOR'
'LFB5-MAHNA'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0310'.
perform bdc_field using 'BDC_CURSOR'
'LFM1-WAERS'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFM1-WAERS'
IT_XK01-WAERS.
perform bdc_dynpro using 'SAPMF02K' '0320'.
perform bdc_field using 'BDC_CURSOR'
'WYT3-PARVW(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
CALL TRANSACTION 'XK01' USING IT_BDCDATA
MODE 'A'
UPDATE 'S'
MESSAGES INTO IT_BDCMSGCOLL.
ENDLOOP.
FORM BDC_DYNPRO USING PROG SCR.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROG.
IT_BDCDATA-DYNPRO = SCR.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORM.
Reward if helpful

How to update record in Table control

Dear Friends,
I have table control that has space for 10 records but i need to update 15 record from the flat file which is getting into the table how can i do this.
Regards,
MAHENDRA.

Hi,
you record for an item and then click on page down and save it.use the loop on this bdc to populate the the bdc table no need to do manually.
LOOP AT l_i_dettab_item INTO l_wa_dettab_item..
      l_cursor = l_cursor + 1.
      IF l_cursor GT 1.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                               '=P+'.
      ENDIF.
      PERFORM cursor_pos_notation    USING 'V_EAN_DET001- GTIN_VARIANT_TYP'
                                              l_cursor
                                    CHANGING l_cursor_notation.
      PERFORM cursor_pos_notation    USING 'V_EAN_DET001-VTWEG'
                                              l_cursor
                                    CHANGING l_cursor_notation.
      PERFORM bdc_field       USING l_cursor_notation
                                    l_wa_dettab_item-vtweg.
      PERFORM cursor_pos_notation    USING 'V_EAN_DET001-DATEFROM'
                                              l_cursor
                                    CHANGING l_cursor_notation.
         PERFORM bdc_field       USING l_cursor_notation
                                    l_v_date.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    l_cursor_notation.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=SAVE'.
    ENDLOOP.
Here my ok code for page down is =P+ so i am looping on the table control data and then populating the bdc table after this i will populate the remaing info required for the call transaction and refresh bdcdata.
thats it no need to do recording 1000 times.
now if u do like this it doesn't depend on the number of records on table control.
it will take all the records.
Reward if useful.
Regards,
sasi
Regards,
sasi

Duplicate records in TABLE CONTROL

Hi folks,
i am doing a module pool where my internal table (itab) data is comming to table ontrol(ctrl).then i need to select one record in table control & then i press REFRESH push button.
after putting the refresh button, some new records are comming to that same internal table.then i need to display the modified internal table (some new records are added) data in the table control.
The modified internal table data is comming to the table control but to the last of table control, some records are repeating.
before comming to table control, i checked the modified itab. it contains correct data.i.e it contains 15 records.(previously i have 5 records.after REFRESH button 10 more records are added.). but when this table is comming to table control, it contains some 100 record.i should get only 15 record.
why these records r repeting. how to delete the duplicate records from table control?
plz suggest me where i am doing mistake.
correct answer will be rewarded
Thanks & Regards

Hi ,
Thanks for ur help. but i should not refresh the internal table as some records r already present.after putting the REFRESH button, some new records r appending to this existing table.then i am going to display the previous records & the new records as well.
i checked the internal table after modification.it contains actual number of records. but after comming to table control , more records r comming.
is this the problem with scrolling or waht?
plz suggest where i am doing mistake.i am giving my coding below.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0200.
module tc_shelf_change_tc_attr.
loop at object_tab1
 with control tablctrl
 cursor tablctrl-current_line.
 module tc_shelf_get_lines.
endloop.
PROCESS AFTER INPUT.
module set_exit AT EXIT-COMMAND.
 loop at object_tab1.
 chain.
 field: object_tab1-prueflos,
 object_tab1-matnr.
 module shelf_modify on chain-request.
 endchain.
 field object_tab1-idx
 module shelf_mark on request.
 endloop.
module shelf_user_command.
module user_command_0200.
***INCLUDE Y_RQEEAL10_STATUS_0200O01 .
*& Module STATUS_0200 OUTPUT
 text
MODULE STATUS_0200 OUTPUT.
SET PF-STATUS 'MAIN'.
SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_0200 OUTPUT
*& Module tc_shelf_change_tc_attr OUTPUT
 text
MODULE tc_shelf_change_tc_attr OUTPUT.
delete adjacent duplicates from object_tab1 comparing prueflos matnr.
describe table object_tab1 lines tablctrl-lines.
ENDMODULE. " tc_shelf_change_tc_attr OUTPUT
*& Module tc_shelf_get_lines OUTPUT
 text
MODULE tc_shelf_get_lines OUTPUT.
data: g_tc_shelf_lines like sy-loopc.
if tablctrl-current_line > tablctrl-lines.
stop.
endif.
g_tc_tablctrl_lines = sy-loopc.
*refresh control tablctrl from screen 0200.
ENDMODULE. " tc_shelf_get_lines OUTPUT
***INCLUDE Y_RQEEAL10_SHELF_MODIFYI01 .
*& Module shelf_modify INPUT
 text
MODULE shelf_modify INPUT.
modify object_tab1
 index tablctrl-current_line.
ENDMODULE. " shelf_modify INPUT
*& Module set_exit INPUT
 text
module set_exit INPUT.
leave program.
endmodule. " set_exit INPUT
*& Module shelf_mark INPUT
 text
MODULE shelf_mark INPUT.
data: g_shelf_wa2 like line of object_tab1.
if tablctrl-line_sel_mode = 1
and object_tab1-idx = 'X'.
 loop at object_tab1 into g_shelf_wa2
 where idx = 'X'.
 g_shelf_wa2-idx = ''.
 modify object_tab1
 from g_shelf_wa2
 transporting idx.
 endloop.
endif.
modify object_tab1
 index tablctrl-current_line
 transporting idx plnty plnnr plnal.
ENDMODULE. " shelf_mark INPUT
*& Module shelf_user_command INPUT
 text
MODULE shelf_user_command INPUT.
ok_code = sy-ucomm.
perform user_ok_tc using 'TABLCTRL'
 'OBJECT_TAB1'
 changing ok_code.
sy-ucomm = ok_code.
ENDMODULE. " shelf_user_command INPUT
*& Module user_command_0100 INPUT
 text
MODULE user_command_0200 INPUT.
data:v_line(3).
case OK_CODE.
when 'LAST'.
read table object_tab1 with key idx = 'X'.
if sy-subrc = 0.
select * from qals
 where enstehdat <= object_tab1-enstehdat
 and plnty ne space
 and plnnr ne space
 and plnal ne space.
if sy-dbcnt > 0.
if qals-enstehdat = object_tab1-enstehdat.
 check qals-entstezeit < object_tab1-entstezeit.
 move-corresponding qals to object_tab2.
 append object_tab2.
 else.
 move-corresponding qals to object_tab2.
 append object_tab2.
 endif.
 endif.
 endselect.
 sort object_tab2 by enstehdat entstezeit descending.
loop at object_tab2 to 25.
if not object_tab2-prueflos is initial.
append object_tab2 to object_tab1.
endif.
clear object_tab2.
endloop.
endif.
when 'SAVE'.
loop at object_tab1 where idx = 'X'.
if ( not object_tab1-plnty is initial and
 not object_tab1-plnnr is initial and
 not object_tab1-plnal is initial ).
 select single * from qals into corresponding fields of wa_qals
 where prueflos = object_tab1-prueflos.
 if sy-subrc = 0.
 wa_qals-plnty = object_tab1-plnty.
 wa_qals-plnnr = object_tab1-plnnr.
 wa_qals-plnal = object_tab1-plnal.
update qals from wa_qals.
if sy-subrc <> 0.
Message E001 with 'plan is not assigned to lot in sap(updation)'.
else.
v_line = tablctrl-current_line - ( tablctrl-current_line - 1 ).
delete object_tab1.
endif.
 endif.
 endif.
 endloop.
when 'BACK'.
leave program.
when 'NEXT'.
call screen 300.
ENDCASE.
***INCLUDE Y_RQEEAL10_USER_OK_TCF01 .
*& Form user_ok_tc
 text
 -->P_0078 text
 -->P_0079 text
 <--P_OK_CODE text
form user_ok_tc using p_tc_name type dynfnam
 p_table_name
 changing p_ok_code like sy-ucomm.
 data: l_ok type sy-ucomm,
 l_offset type i.
 search p_ok_code for p_tc_name.
 if sy-subrc <> 0.
 exit.
 endif.
 l_offset = strlen( p_tc_name ) + 1.
 l_ok = p_ok_code+l_offset.
 case l_ok.
 when 'P--' or "top of list
 'P-' or "previous page
 'P+' or "next page
 'P++'. "bottom of list
 perform compute_scrolling_in_tc using p_tc_name
 l_ok.
 clear p_ok_code.
 endcase.
endform. " user_ok_tc
*& Form compute_scrolling_in_tc
 text
 -->P_P_TC_NAME text
 -->P_L_OK text
form compute_scrolling_in_tc using p_tc_name
 p_ok_code.
 data l_tc_new_top_line type i.
 data l_tc_name like feld-name.
 data l_tc_lines_name like feld-name.
 data l_tc_field_name like feld-name.
 field-symbols <tc> type cxtab_control.
 field-symbols <lines> type i.
 assign (p_tc_name) to <tc>.
 concatenate 'G_' p_tc_name '_LINES' into l_tc_lines_name.
 assign (l_tc_lines_name) to <lines>.
 if <tc>-lines = 0.
 l_tc_new_top_line = 1.
 else.
 call function 'SCROLLING_IN_TABLE'
 exporting
 entry_act = <tc>-top_line
 entry_from = 1
 entry_to = <tc>-lines
 last_page_full = 'X'
 loops = <lines>
 ok_code = p_ok_code
 overlapping = 'X'
 importing
 entry_new = l_tc_new_top_line
 exceptions
 others = 0.
 endif.
 get cursor field l_tc_field_name
 area l_tc_name.
 if syst-subrc = 0.
 if l_tc_name = p_tc_name.
 set cursor field l_tc_field_name line 1.
 endif.
 endif.
 <tc>-top_line = l_tc_new_top_line.
endform. " COMPUTE_SCROLLING_IN_TC
Thanks

Add a new record to table control

Dear all,
How to add a new blank record to a table control?
Following code is not working for adding a new blank record to a table control
MODULE USER_COMMAND_0100 INPUT.
    SAVE_OK = OK_CODE.
    CLEAR OK_CODE.
    CASE SAVE_OK.
      WHEN 'EXIT'.
        LEAVE PROGRAM.
      WHEN 'APND'.             " A button "Add" to add a new record to table control
        REFRESH IT_KNA1.
        CLEAR IT_KNA1.
        APPEND IT_KNA1.
    ENDCASE.
ENDMODULE.
Thanks you

Hope you have done all table control specific coding
refer this example program
http://help.sap.com/saphelp_nw04/helpdata/en/9f/dbac5e35c111d1829f0000e829fbfe/content.htm

How to create Search Help for a field in Table control !!

Hello Friends,
 I like to know - How to create Search Help for a field in Table control. Is it possible, if it is please share ur knowledge, I wud be happy if U provide some source code example for this.
Thanks,
Senthil

Check the sample code:
*& Include ZSRO_MPRN_SEARCH *
MODULE PSTLZ_F4 INPUT
MODULE pstlz_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
 stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR: lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = sy-repid
 dynumb = sy-dynnr
 translate_to_upper = c_x
 determine_loop_index = c_x
 TABLES
 dynpfields = lt_dynpfields
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 invalid_parameter = 7
 undefind_error = 8
 double_conversion = 9
 stepl_not_found = 10
 OTHERS = 11.
IF sy-subrc EQ 0.
 READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
 MOVE lt_dynpfields-fieldvalue TO ws_outcode.
 ws_len = STRLEN( lt_dynpfields-fieldvalue ).
 IF ws_len GE 7.
 ws_len = ws_len - 3.
 ws_icode = ws_code+ws_len(3).
 lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
 CONCATENATE lt_dynpfields-fieldvalue '%'
 INTO ws_outcode.
 CONDENSE lt_dynpfields-fieldvalue.
 REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
 ELSE.
 CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
 INTO ws_outcode.
 ENDIF.
 ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR: lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = sy-repid
 dynumb = sy-dynnr
 translate_to_upper = 'X'
 TABLES
 dynpfields = lt_dnpfields
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 invalid_parameter = 7
 undefind_error = 8
 double_conversion = 9
 stepl_not_found = 10
 OTHERS = 11.
IF sy-subrc EQ 0.
 READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
 IF NOT lt_dynpfields-fieldvalue IS INITIAL.
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1
 WHERE outcode LIKE ws_outcode.
 ELSE.
MPRN blank and Post code blank
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1.
 ENDIF.
ELSE.
MPRN exist and Post code exist
 IF NOT lt_dynpfields-fieldvalue IS INITIAL.
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1
 WHERE outcode LIKE ws_outcode AND
 mprn EQ lt_dnpfields-fieldvalue.
 ELSE.
MPRN exist and Post code blank
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1
 WHERE mprn EQ lt_dnpfields-fieldvalue.
 ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 retfield = 'MPRN'
 dynpprog = sy-repid
 dynpnr = sy-dynnr
 window_title = 'Select MPRN'
 value_org = 'S'
 TABLES
 value_tab = i_mprn1 "lt_mprn
 return_tab = lt_returntab
 EXCEPTIONS
 parameter_error = 1
 no_values_found = 2
 OTHERS = 3.
IF sy-subrc EQ 0.
 READ TABLE lt_returntab INDEX 1.
 READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
 IF sy-subrc EQ 0.
Updating post code
 CONCATENATE i_mprn1-outcode i_mprn1-incode
 INTO ws_postcode
 SEPARATED BY space.
 MOVE ws_postcode TO i_mprn-post_code.
 CLEAR : i_dnpfld,
 ws_dynpfld.
 REFRESH : i_dnpfld.
 ws_dyname = 'ZSRO_MASTER_DATA'.
 ws_dynumb = '0301'.
 ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
 ws_dynpfld-fieldvalue = ws_postcode .
 ws_dynpfld-stepl = stepl_index.
 APPEND ws_dynpfld TO i_dnpfld.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname
 dynumb = ws_dynumb
 TABLES
 dynpfields = i_dnpfld
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
Updating MPRN
 MOVE i_mprn1-mprn TO i_mprn-mprn.
 CLEAR : i_dnpfld,
 ws_dynpfld.
 REFRESH : i_dnpfld.
 ws_dyname = 'ZSRO_MASTER_DATA'.
 ws_dynumb = '0301'.
 ws_dynpfld-fieldname ='I_MPRN-MPRN'.
 ws_dynpfld-fieldvalue = i_mprn1-mprn .
 ws_dynpfld-stepl = stepl_index.
 APPEND ws_dynpfld TO i_dnpfld.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname
 dynumb = ws_dynumb
 TABLES
 dynpfields = i_dnpfld
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
 ENDIF.
ELSEIF sy-subrc EQ 2.
 MESSAGE s005(zspa) WITH ws_postcode .
ENDIF.
ENDMODULE. "PSTLZ_F4 INPUT
MODULE MPRN_F4 INPUT
MODULE mprn_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
 stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR: lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = sy-repid
 dynumb = sy-dynnr
 translate_to_upper = c_x
 determine_loop_index = c_x
 TABLES
 dynpfields = lt_dynpfields
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 invalid_parameter = 7
 undefind_error = 8
 double_conversion = 9
 stepl_not_found = 10
 OTHERS = 11.
IF sy-subrc EQ 0.
 READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
 MOVE lt_dynpfields-fieldvalue TO ws_outcode.
 ws_len = STRLEN( lt_dynpfields-fieldvalue ).
 IF ws_len GE 7.
 ws_len = ws_len - 3.
 ws_icode = ws_code+ws_len(3).
 lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
 CONCATENATE lt_dynpfields-fieldvalue '%'
 INTO ws_outcode.
 CONDENSE lt_dynpfields-fieldvalue.
 REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
 ELSE.
 CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
 INTO ws_outcode.
 ENDIF.
 ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR: lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = sy-repid
 dynumb = sy-dynnr
 translate_to_upper = 'X'
 TABLES
 dynpfields = lt_dnpfields
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 invalid_parameter = 7
 undefind_error = 8
 double_conversion = 9
 stepl_not_found = 10
 OTHERS = 11.
IF sy-subrc EQ 0.
 READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
 IF NOT lt_dynpfields-fieldvalue IS INITIAL.
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1
 WHERE outcode LIKE ws_outcode.
 ELSE.
MPRN blank and Post code blank
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1.
 ENDIF.
ELSE.
MPRN exist and Post code exist
 IF NOT lt_dynpfields-fieldvalue IS INITIAL.
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1
 WHERE outcode LIKE ws_outcode AND
 mprn EQ lt_dnpfields-fieldvalue.
 ELSE.
MPRN exist and Post code blank
 SELECT mprn ser_num sub_bud bud_name del_pt_alias
 bud_num dep_street prin_street dbl_dep_street
 dep_locty post_town county outcode incode
 lg_site_ind file_date FROM zspa_mprn INTO
 CORRESPONDING FIELDS OF TABLE i_mprn1
 WHERE mprn EQ lt_dnpfields-fieldvalue.
 ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 retfield = 'MPRN'
 dynpprog = sy-repid
 dynpnr = sy-dynnr
 window_title = 'Select MPRN'
 value_org = 'S'
 TABLES
 value_tab = i_mprn1 "lt_mprn
 return_tab = lt_returntab
 EXCEPTIONS
 parameter_error = 1
 no_values_found = 2
 OTHERS = 3.
IF sy-subrc EQ 0.
 READ TABLE lt_returntab INDEX 1.
 READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
 IF sy-subrc EQ 0.
Updating MPRN
 MOVE i_mprn1-mprn TO i_mprn-mprn.
 CLEAR : i_dnpfld,
 ws_dynpfld.
 REFRESH : i_dnpfld.
 ws_dyname = 'ZSRO_MASTER_DATA'.
 ws_dynumb = '0301'.
 ws_dynpfld-fieldname ='I_MPRN-MPRN'.
 ws_dynpfld-fieldvalue = i_mprn1-mprn .
 ws_dynpfld-stepl = stepl_index.
 APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
 ws_dynpfld-stepl = mprn-current_line.
**code changed by laxman 10.08.2005
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname
 dynumb = ws_dynumb
 TABLES
 dynpfields = i_dnpfld
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
Updating post code
 CONCATENATE i_mprn1-outcode i_mprn1-incode
 INTO ws_postcode
 SEPARATED BY space.
 MOVE ws_postcode TO i_mprn-post_code.
 CLEAR : i_dnpfld,
 ws_dynpfld.
 REFRESH : i_dnpfld.
 ws_dyname = 'ZSRO_MASTER_DATA'.
 ws_dynumb = '0301'.
 ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
 ws_dynpfld-fieldvalue = ws_postcode .
 ws_dynpfld-stepl = stepl_index.
 APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
 break gblap0.
 ws_dynpfld-stepl = mprn-current_line.
 LOOP AT i_mprn.
 MOVE i_mprn1-mprn TO i_mprn-mprn.
 MOVE ws_postcode TO i_mprn-post_code.
 MODIFY i_mprn INDEX
 mprn-current_line." transporting MPRN POST_CODE.
 ENDLOOP.
**code changed by laxman 10.08.2005
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname
 dynumb = ws_dynumb
 TABLES
 dynpfields = i_dnpfld
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
 ENDIF.
ELSEIF sy-subrc EQ 2.
 MESSAGE s006(zspa) WITH i_mprn1-mprn .
ENDIF.
ENDMODULE. "MPRN_F4 INPUT
MODULE GNTC_F4 INPUT
MODULE gntc_f4 INPUT.
DATA: BEGIN OF lt_gntc OCCURS 0,
 gntc LIKE iflot-zzgntc,
 END OF lt_gntc.
CLEAR: lt_returntab, lt_gntc.
REFRESH: lt_returntab, lt_gntc.
lt_gntc-gntc = 'DM'.
APPEND lt_gntc. CLEAR lt_gntc.
lt_gntc-gntc = 'NDM'.
APPEND lt_gntc. CLEAR lt_gntc.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 retfield = 'ZZGNTC'
 dynpprog = sy-repid
 dynpnr = sy-dynnr
 window_title = 'Select Gas Nomination Type Code'
 value_org = 'S'
 TABLES
 value_tab = lt_gntc
 return_tab = lt_returntab
 EXCEPTIONS
 parameter_error = 1
 no_values_found = 2
 OTHERS = 3.
IF sy-subrc EQ 0.
 READ TABLE lt_returntab INDEX 1.
 i_mprn-dm_ndm = lt_returntab-fieldval.
ENDIF.
ENDMODULE. "GNTC_F4 INPUT
*& Module mprn1_f4 INPUT
 text
MODULE mprn1_f4 INPUT.
DATA: lt_f4 TYPE ddshretval OCCURS 0 WITH HEADER LINE,
 lt_returntab1 LIKE ddshretval OCCURS 0 WITH HEADER LINE,
 lt_dynpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE,
 lt_dnpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE.
DATA: stepl1 TYPE systepl,
 stepl_index1 TYPE systepl.
DATA : i_dnpfld1 LIKE dynpread OCCURS 0 WITH HEADER LINE,
 ws_dyname1 LIKE d020s-prog,
 ws_dynumb1 LIKE d020s-dnum,
 ws_dynpfld1 LIKE dynpread.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
 lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
 stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields1-stepl = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = sy-repid
 dynumb = sy-dynnr
 translate_to_upper = 'X'
 determine_loop_index = 'X'
 TABLES
 dynpfields = lt_dynpfields1
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 invalid_parameter = 7
 undefind_error = 8
 double_conversion = 9
 stepl_not_found = 10
 OTHERS = 11.
IF sy-subrc EQ 0.
 READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
 EXPORTING
 tabname = 'IFLOT'
 fieldname = 'I_MPRN-MPRN'
 searchhelp = 'ZS_MPRN_PC'
 dynpprog = sy-repid
 dynpnr = sy-dynnr
 TABLES
 return_tab = lt_f4
 EXCEPTIONS
 field_not_found = 1
 no_help_for_field = 2
 inconsistent_help = 3
 no_values_found = 4
 OTHERS = 5.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
 MOVE lt_f4-fieldval TO i_mprn-mprn.
 ws_dyname1 = 'ZSRO_MASTER_DATA'.
 ws_dynumb1 = '0301'.
 ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
 ws_dynpfld1-fieldvalue = i_mprn-mprn.
 ws_dynpfld1-stepl = stepl_index1.
 APPEND ws_dynpfld1 TO i_dnpfld1.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname1
 dynumb = ws_dynumb1
 TABLES
 dynpfields = i_dnpfld1
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
 MOVE lt_f4-fieldval TO i_mprn-post_code.
 ws_dyname1 = 'ZSRO_MASTER_DATA'.
 ws_dynumb1 = '0301'.
 ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
 ws_dynpfld1-fieldvalue = i_mprn-post_code.
 ws_dynpfld1-stepl = stepl_index1.
 APPEND ws_dynpfld1 TO i_dnpfld1.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname1
 dynumb = ws_dynumb1
 TABLES
 dynpfields = i_dnpfld1
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
ENDIF.
ENDMODULE. " mprn1_f4 INPUT
*& Module pstlz1_f4 INPUT
 text
MODULE pstlz1_f4 INPUT.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
 lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
 stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-MPRN'.
lt_dynpfields1-stepl = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 dyname = sy-repid
 dynumb = sy-dynnr
 translate_to_upper = 'X'
 determine_loop_index = 'X'
 TABLES
 dynpfields = lt_dynpfields1
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 invalid_parameter = 7
 undefind_error = 8
 double_conversion = 9
 stepl_not_found = 10
 OTHERS = 11.
IF sy-subrc EQ 0.
 READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
 EXPORTING
 tabname = 'IFLOT'
 fieldname = 'I_MPRN-POST_CODE'
 searchhelp = 'ZS_MPRN_PC'
 dynpprog = sy-repid
 dynpnr = sy-dynnr
 TABLES
 return_tab = lt_f4
 EXCEPTIONS
 field_not_found = 1
 no_help_for_field = 2
 inconsistent_help = 3
 no_values_found = 4
 OTHERS = 5.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
 MOVE lt_f4-fieldval TO i_mprn-post_code.
 ws_dyname1 = 'ZSRO_MASTER_DATA'.
 ws_dynumb1 = '0301'.
 ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
 ws_dynpfld1-fieldvalue = i_mprn-post_code.
 ws_dynpfld1-stepl = stepl_index1.
 APPEND ws_dynpfld1 TO i_dnpfld1.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname1
 dynumb = ws_dynumb1
 TABLES
 dynpfields = i_dnpfld1
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
 MOVE lt_f4-fieldval TO i_mprn-mprn.
 ws_dyname1 = 'ZSRO_MASTER_DATA'.
 ws_dynumb1 = '0301'.
 ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
 ws_dynpfld1-fieldvalue = i_mprn-mprn.
 ws_dynpfld1-stepl = stepl_index1.
 APPEND ws_dynpfld1 TO i_dnpfld1.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 dyname = ws_dyname1
 dynumb = ws_dynumb1
 TABLES
 dynpfields = i_dnpfld1
 EXCEPTIONS
 invalid_abapworkarea = 1
 invalid_dynprofield = 2
 invalid_dynproname = 3
 invalid_dynpronummer = 4
 invalid_request = 5
 no_fielddescription = 6
 undefind_error = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
ENDIF.
ENDMODULE. " pstlz1_f4 INPUT
Regards,
Prakash.

Selection of records in TABLE CONTROL.

hello friends, this is venkat.
I have been using a table contrlo to display the contents of a custom table.
my table control can display 10 records in one shot and my custom table had more than that. vertical scroll bar has been working properly so i can see all the records in the table control area.
now my problam is after i selecting one record, to select another record i am using the vertical scroll bar. but the moment i am scrolling the vertical scroll bar the previously selected one becomes non selected..
how can i select a record and still scroll down or up to select some more records..
another doubt i had is when ever i use vertical scroll bar PAI is geeting triggered but i am not gettig any information in SY-UCOM... how can i catch this event...
just like checking for function code when we click on PUSH BUTTON.
i will be very thanful if any one can give me some guidance.....
Venkat.

Hi Venkat,
Basically there are 2 ways in which u can create a table control either for a internal table or for database table.
u can use the wizard from within the screen painter OR
create a table control manually adding individual fields and handling the table control on your own.
in the former method, SAP generates the code behind automatically which is not really comprehendable.
I prefer the later method where u code and have a lot of flexibility of changing the table control at a later stage.
For information on creating table controls, please refer SAP library under
ABAP Programming>ABAP User dialogs>Screens>Complex screen elements>Table controls

Search help for a field in table control based on another field value

Hi,
I want to attach the Search help for a field in table control based on another field value.
Please help me asap.
Will be highly rewarded

HI,..
Check these links
search help in table control
Re: How to create Search Help for a field in Table control !!
How to create Search Help for a field in Table control !!
F4 Help In Table Control
Control table F4 help
Problem in F4 help in screen field
check this code
DATA: BEGIN OF it_value4 OCCURS 0,
 TEXTCODE LIKE ZXX-TEXTCODE,
 TEXTDESC LIKE ZXX-TEXTDESC,
 END OF it_value4.
progname = sy-repid.
dynnum = sy-dynnr.
 SELECT TEXTCODE TEXTDESC
 FROM xxxx
 INTO CORRESPONDING FIELDS OF TABLE it_value4
 WHERE LOSS_CODE = IT_VALUE1 .
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 retfield = 'TEXTCODE'
 dynpprog = progname
 dynpnr = dynnum
 dynprofield = 'ITVALUE-TEXTCODE' "-->UR 4 th filed value in screen
 value_org = 'S'
 TABLES
 value_tab = it_value4.
endmodule.
Message was edited by:
 veereshbabu ponnada

How to save the selected records from Table control in dialog programming

Hiiiiiiii Every1
Actually the problem is like this:-
I have to select some records from table control and then want to save the selected records in DB table.
Example
I have some rows having inforamtion bout employees...
Now what i want is that when i click on 'SAVE' button then these selected rows should be moved into DB table.
Sachin Dhingra

see below example, I have added INSERT option after DELETE option.
REPORT demo_dynpro_tabcont_loop_at.
CONTROLS flights TYPE TABLEVIEW USING SCREEN 100.
DATA cols LIKE LINE OF flights-cols.
DATA: ok_code TYPE sy-ucomm,
      save_ok TYPE sy-ucomm.
DATA: itab TYPE TABLE OF demo_conn.
TABLES demo_conn.
SELECT * FROM spfli INTO TABLE itab.
LOOP AT flights-cols INTO cols WHERE index GT 2.
cols-screen-input = '0'.
MODIFY flights-cols FROM cols INDEX sy-tabix.
ENDLOOP.
CALL SCREEN 100.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE read_table_control INPUT.
MODIFY itab FROM demo_conn INDEX flights-current_line.
ENDMODULE.
MODULE user_command_0100 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
    WHEN 'TOGGLE'.
      LOOP AT flights-cols INTO cols WHERE index GT 2.
        IF cols-screen-input = '0'.
          cols-screen-input = '1'.
        ELSEIF cols-screen-input = '1'.
          cols-screen-input = '0'.
        ENDIF.
        MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDLOOP.
    WHEN 'SORT_UP'.
      READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
      IF sy-subrc = 0.
        SORT itab STABLE BY (cols-screen-name+10) ASCENDING.
        cols-selected = ' '.
        MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDIF.
    WHEN 'SORT_DOWN'.
      READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
      IF sy-subrc = 0.
        SORT itab STABLE BY (cols-screen-name+10) DESCENDING.
        cols-selected = ' '.
        MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDIF.
    WHEN 'DELETE'.
      READ TABLE flights-cols INTO cols WITH KEY screen-input = '1'.
      IF sy-subrc = 0.
        LOOP AT itab INTO demo_conn WHERE mark = 'X'.
          DELETE itab.
        ENDLOOP.
      ENDIF.
    WHEN 'INSERT'.
      READ TABLE flights-cols INTO cols WITH KEY screen-input = '1'.
      IF sy-subrc = 0.
        LOOP AT itab INTO demo_conn WHERE mark = 'X'.
          itab1 = itab.
          modify itab1.
        ENDLOOP.
      ENDIF.
      if not itab1 is initial.
        INSERT dbtab FROM TABLE itab1.
      endif.
ENDCASE.
ENDMODULE.

Disabling the dropdown LOV for existing records in SQL updateable report

Hi All -
I have a SQL updateable report which has 3 columns. One of the column is a named-LOV. This report also provides the functionality of inserting new rows.
Is there a way to only show the named-LOV dropdown list for only the new records to be inserted i.e. when we click on "Add Row". For existing records, I donot want to show the dropdown.
Please provide your thoughts.
Thanks,
-Seenu

Thanks Robert -
I guess I didn't put my question right in my earlier posting.
Basically this report provides updates and inserts both (Its a SQL Updateable report)
One of the column is a Named-LOV (select list dropdown). For the existing records shown in this report, this select list should be disabled. But for the new records while inserting a new row into this report, the select list dropdown should be shown to the user with an option to choose values from selectlist.
Thanks,
-Seenu

Default value for a column in Table Control

Hi friends, can i set dinamcally a default value for a column in table control?, this column is check type. This default value must appear in empty rows,
thanks

ADD A MODULE AS Module yyyy In ur PAI.
as
In PAI.
LOOP at itab.
Module YYYY
ENDLOOP.
Module YYYY.
LOOP AT SCREEN.
    IF SCREEN-NAME = 'ITAB-VAL.
      ITAB-VAL = 'XXXXXXXX'        "(DEFAULT VALUE)
      SCREEN-INPUT = 0.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
End module.
*note
make this event work only if the previous column is filled okay.
the display will be in display mode on the screen as screen-input = 0.
see that in the table control u can get the table field for all the rows even though you are processing on some fields .
so what u do is make that particular filed masked(no i/p field and populate the field that will be better instead of populating all the columns okay.
hope this helps you out ,
regards,
vijay.

BDC for existing record in table control

Similar Messages

Maybe you are looking for