BDC Processing Mode Problem

Hi ,
I have problem in BDC recording. i am doing CO02 BDC by Call Transaction when i am Using 'A' and 'E' mode its updating Work center.
and the BDC messagecol fill with following messages.
TCODE DYNAME    DYNUMB   MSGTYP   MSGID           MSGNR       Message
CO02 <SAPLCOKO   0115            |I                |C2                       136         Status of released order is reverted to "Created"
CO02 <SAPLCOKO   0115            |S               |CO                      521         Scheduling carried out (see log)
CO02 <SAPLCOKO   0115            |S               |CO                      521         RS_TESTFRAME_CALL Scheduling carried out (see log)
CO02 <SAPLCOKO   0115            |S                |C2                       002         Release carried out
CO02 <SAPLCOKO   0115            |S                |CO                      100         Order number RS_TESTFRAME_CALL saved
But when i am runing With 'N' Mode its not updating data and giving following messages:
TCODE    DYNAME   DYNUMB   MSGTYP   MSGID    MSGNR                           Message
CO02   <SAPLCOKO <0115             |I                 C2          |136              Status of released order is reverted to "Created"
CO02   <SAPLCOKO <0115             |S                CO         |520              RS_TESTFRAME_CALL scheduling carried out
CO02   <SAPLCOKO <0115             |S                00          |344              No batch input data for screen RS_TESTFRAME_CALL RE
how can i track N mode.

If you look colsly in the LOG of mode N, it clearly says that there is no batch input for screen RS_TESTFRAME_CALL.
When you run in MODE A or MODE E this message comes and you press Enter and system will Skip this step. But when you run with the MODE N, this kine status message "No Batch input ... " will lead to the failure of the BDC. It will not process further steps.
Regards,
Naimesh Patel

Similar Messages

File sender adapter (FTP) - processing mode "Archive"

Hello all
We're polling files from an external FTP server. For this I created a scenario on XI according to this thread:
When setting processing mode to "Archive" in the file sender adapter (ftp) it polls the file, stores it to the archive directory I specified and then tries to delete the file on the FTP server side. This returns me an error because we're not allowed to delete the retrieved files on the FTP server!
Because of this error the file adapter stops further processing and does not poll all the other files.
How can I disable this deletion mechanism while keeping processing mode to "Archive"?!?!?
We do not want to use processing mode "Delete" or "Test" and we don't see other options to influence this behaviour.
Thanks for any guideance on this one in advance!
Kind regards,
Renaud

Hi Bhavesh
Sorry for the late answer. Unfortunately I can't ask the application system to provide file names containing a timestamp within. The files are provided by an external partner and are retrieved by several others as well.
In the meantime I managed to achieve this:
In repository I created dummy data types, message types and message interfaces. No mapping programs and interface mappings!
In configuration I created the necessary communication channels (1 ftp sender, 1 file receiver) and the required receiver and interface determinations as well as the sender and receiver agreements.
The result of this is:
I'm able to poll some specific files via ftp from remote host. The file names are file1.arj, file2.arj, file3.arj and file4.arj. All 4 files have the same SourceFileTimestamp (e.g. "20060727T053900Z").
I'm able to store those 4 files 1:1 in a target directory with the same file names. Until here I did NOT need to follow this blog: <a href="/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14: The same filename from a sender to a receiver file adapter - SP14</a>.
As of this blog it is possible to access adapter specific attributes and make them available in message mapping using user defined functions. This way I'm able to get the SourceFileTimestamp from the polled files and use it in a message mapping. This way I'm also able to use it in variable substitution on file receiver adapter (syntax = "payload:root,1,fileTS,1") in order to dynamically create a directory with this syntax: YYYYMMDD.
So far so good... but the only remaining BIG problem now is, that as soon as the mapping is activated and assigned in the interface determination, the created files contain the XML payload instead of the original binary content. Where has it gone? How should the target message type look like so that it can carry over the original binary file content?
BTW: isn't it possible to post screenshots? Would be much more easier to explain things... so sorry to anyone if I wasn't clear enough!
TIA and best regards,
Renaud

File name for append processing mode with time stamp

Hi Experts
we are doing file to file scenario using the processing mode as Append.
the requirement for us to append the files and we need to have new file name with time stamp added to the appended file.but in the processing mode of the file adapter either we can append or add time stamp. thatz the problem I am facing now.
we are doing file based processing not message based ,micheal blog regarding the dynamic file name is for message based not for file based.
Please provide your valuable comments.
Thanks
Faheem

Hi mohamed,
I suggest you to map the target source structure to the required filename u want, like for example ur filename is input26062008.txt means to the target structure u perform the following mapping
constant (input) concat with currentdate function --> concat with constant .txt --> map this concat to target. So u will get the filename u expected with the time.
Then in the communication channel u select the mode as append. Now ur requirement will get solve i think so. plz try.
Regards,
Murugavel

BW Authorizations - Query variable with processing mode as "customer exit"

Hi,
Iam new to BW authorizations and have not yet worked on customer exit before. I was going through the documentation at various sites but I could not get the end to end description on how the query process( when using a variable for an InfoObject) works in case of customer exit.
Let's assume that I am using a query variable with processing mode as "customer exit" and at the exit I write some code to extract user's authorizations from a z table. if this is the case, then when an end user runs a query,how will the the system know what value needs to be filled in the variable for the requesting user. Are the user details also sent to the code along with the query variable? If so how. If I mis-understood the process then forgive me and let me know the correct process.

Hi!
welcome to SDN!
customer exit variables need programing by user. so if you create a customer exit variable, you got to right a program which extracts values into this variable. we can do what ever we want in program, SAP will not deal anything ´with customer exits.
with regards
ashwin
PS n: Assigning point to the helpful answers is the way of saying thanks in SDN. you can assign points by clicking on the appropriate radio button displayed next to the answers for your question. yellow for 2, green for 6 points(2)and blue for 10 points and to close the question and marked as problem solved. closing the threads which has a solution will help the members to deal with open issues with out wasting time on problems which has a solution and also to the people who encounter the same porblem in future. This is just to give you information as you are a new user.

My movie download is stuck in process mode for 10 hours

I downloaded a movie to watch on a trip and for the last 10+ hours it's seems to be stuck in the process mode. I can't watch the movie I can't delete the movie,

Downgrading the iOS is not supported by Apple. You will get errors/it will not work
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

EDI: IDoc ' IDOC No ' is already open in process mode

Hi,
I have a File to IDOC scenario. Everything is fine in PI. But in R/3, (WE05) there is an error. Please suggest what might be the problem.
IDoc: <IDOC No> Status: Application document not posted
EDI: IDoc <IDOC No>' is already open in process mode
Best Regards,
Madan Agrawal

Madan Agrawal,
I wonder whether this issue is related to SAP XI. It seems related to this thread: Re: Inbound Idoc not processed gives an error message
There the problem is related to some ABAP code is SAP R/3.
Kind regards,
Koen

Receiving Transaction Processor runs even if processing mode is ON-LINE

Hi All,
We have a problem with receiving. The profile option RCV: Processing Mode is set to ON-LINE at site level. We observed that the Receiving Transaction Processor is running for a bunch of transactions with IMMEDIATE processing mode.
We checked the responsibility level and user level profile options too and nothing is set. only at site level we have that profile option set to ON-LINE.
What could be the reason for this Transaction Processor to run???
Please let us know.
Thanks,
Prathima

How are you trying to receive the items. Is it through iProcurement or Core Purchasing Forms?

SM35 Batch Still Showing in Processing Mode (how to stop)

Dear SAP Expert,
We have one batch file (created from input BDC) where records contained 1500.
Due to some power SAP was shut down and when user checked in SM35 the batch was showing in still processing mode.
Aftre hours waiting user used - release option and fount that now batch showing only 10 records.
On detailed checking user found that all 1490 reocrds got posted in SAP successfuly but ten records which are real error cases showing as a error.
Now we have query:
- Can be bring records which are removed from the batch (for record puroposes)?
- What is the correct way to stop the batch which are still in use?
Looking for your assistance
Thanks & regards,
Prashant Rane

Hi,
Method to stop session
Check your UID have authorization
You can delete unwanted sessions with abap program RSBDCTL6 with transaction code:SE38.
If not, discuss with BASIS person, they will delete Session.
How to upload remaining 10 values?
1 - Download data from SAP.
2 - Cross check download file with upload file
3 - Identify values from upload file
4 - upload remaining values.
regards
Viswa

ESS Portal is going to Processing mode (webdynpro)

Hi all,
Plz Look into this matter.
in ESS Portal While pressing the Save button it is going to processing mode.
it is not going to even if debugging mode though i have set the break-point in the program.
so can any bod tell me where is the exact problem ,
it was happening earlier successfully .
but now it is creating the problem.
regards,
Sachhi

Hi,
Firstable, you have to set an EXTERNAL break-point with the same user that you are logged in Portal.
You can do this in Menu: Utilities > Settings > Tab ABAP Editor > Tab Debugging.
Regards,

RECEIVING PROCESSING MODE에 대한 BULLETIN

제품 : MFG_PO
작성날짜 : 2004-02-10
RECEIVING PROCESSING MODE에 대한 BULLETIN
======================================
PURPOSE
PO receipt를 실행시키다 보면 RCV:Processing Mode에 따라 문제가 발생
하거나 정상적이거나 혹은 debug가 생성되거나 하는 다른 양상을 볼 수
있다. 이 Note는 이런 Receiving Processing Mode에 대한 차이점을 설명하여
향후 문제 해결에 도움이 주고자 한다.
Explanation
## Creating Receipts ##
Receiving transactions이 실행되면 data는 RCV: Processing Mode(On-line,
Immediate or Batch) 값에 의해 바로 수반되는 processing을 위해
RCV_TRANSACTIONS_INTERFACE table에 pending status로 저장된다.
이 Profile 값은 오직 PO form을 통해 transaction이 실행 되어질 경우에만
고려된다. 일반적으로 이 Profile option 값은 system level로 지정되나
users 별로 personal profile에서 이 값을 변경할 수 있다.
## Processing Mode values ##
On-line:
On-line mode는 가장 많이 사용하는 processing mode이다.
User가 transaction을 저장하면 다른 application activity는 이 process가
종료되기 전까지는 실행되지 않는다.
성공적으로 저장된 transaction의 수나 error message를 화면에 나타낸다.
$PO_TOP/bin/RCVOLTM Receiving Transaction Manager executable
program을 이용한다.
Immediate:
User가 transaction을 저장할 때 Receiving Transaction Processor
concurrent problem이 자동으로 시작되고 receipt을 위해
RCV_TRANSACTIONS_INTERFACE table에 생성된 data를 처리한다.
Form의 control은 다른 application activity를 실행하려는 user에게로
돌아간다.
Transaction에서 error가 발생하면 이 내용은 PO_INTERFACE_ERRORD table에
저장되며 이 error내용은 Transaction Status Summary form에서 볼 수 있다.
Error에 대한 추가적인 정보는 View/Requests의 Receiving Transaction
Processor concurrent request의 log file에서 확인 할 수 있다.
$PO_TOP/bin/RCVTP Reciving Transaction Manager executable
program을 이용한다
Batch:
User가 transaction을 저장할 때, Receiving Transaction Processor
concurrent program이 report submission을 통해 실행될 때까지 data는
RCV_TRANSACTIONS_INTERFACE table 안에 남아있다.
Form의 control은 다른 application activity를 실행하려는 user에게로
돌아간다.
Receiving Transaction Processor가 실행될 때,이 process는 Processing_mode
가 'BATCH'인 모든 pending record를 처리할 것이다.
Transaction 실행시 error가 발생하면 이 내용은 PO_INTERFACE_ERRORS table
에 저장되고 Transaction Status Summary 화면에서 볼 수 있다.
## 기타 ##
Receipt form이나 이와 관련있는 libraries는 RCV_TRANSACTIONS_INTERFACE
table에 data를 저장하기 전에 역시 validation을 선행한다.
이런 validation error는 어떤 processing mode를 사용하는지 관계없이
form 위에서 조회가 된다.
Receiving Transaction Summary form이나 Transaction Status Summary form
은 Transaction의 성공적인 진행이나 실패를 확인하는데 이용된다.
Receiving Transaction Summary form은 error외에 추가로 Status가 'Pending'
인 transaction을 보여준다.
RCV: Processing Mode가 'On-Line'일때 저장된 transaction이라 하더라도
Pending status의 transaction이 RCV_TRANSACTIONS_INTERFACE table에 남아
있으면 안된다.(이런 경우가 종종 발생)
이런 transaction은 form의 Delete icon을 이용하여 삭제할 수 있으며,삭제
후 다시 processing 해야 한다.
RCV: Processing Mode가 'Immediate'인 Receiving Transaction Processor가
아직 transaction을 처리하지 않았다면 Pending status가 transaction이 존재
하는것은 가능하다. 보통 이런 transaction은 짧은 시간안에 처리가 될
것이다. 종종 이런 record가 Pending 상태로 RCV_TRANSACTIONS_INTERFACE에
남아있는 경우가 있는데 이런 경우 form의 Delete icon을 이용하여 삭제 후
다시 processing 해야 한다.
Example
Reference Documents
Note 197860.1

it has been answered

Browser progress bar still in processing mode after loading the page

Hi all,
In my project ,I am facing one problem.
After completion of loading page the IE browser progress bar is still showing that loading is not yet done. That means progress bar is in still processing mode.
Can any one please tell me what is the reason behind it.
Sujan

Are you creating the pages dynamically with JavaScript? If you do a document.open() and then do document.write()s but forget to do a document.close(), the loading animation will continue to display.

How to select text and pictures together in word processing mode?

Hello,
I have written about 20 chapters of a book in word processing mode. Each chapter has many pictures, carefully positioned within the text.
Each chapter is a separate pages file.
Now i want to put them together into one single document and have a big problem.
When i press cmd+A to select everything in one document in order to copy and paste it into another document, i can either select the text OR the pictures, not both together.
In Layout mode it is possible, but not in word processing mode.
Does anybody know how to select both in word processing mode or how to transform a word processing document into a layout mode document?
Or is there a way to put together a word processing document from a number of single documents?
Thanks in advance
funthomas

I still use word processing for just about everything. The first two versions of Pages only had word processing. I think all of the complaints/requests about the "always-present" text layer led the developers to add page layout. I think they would have been better off adding another application (like AppleWorks' draw module compared to AppleWorks' word processing module.

How to insert blank page into pages document when using word processing mode?

I've recently created a 50+ page document using Pages '09. I started the document using word processing mode. Now, when I view in thumbnail mode and try to insert a blank page somehwere in the middle of the document, it won't allow me to select where I want. It just selects all the pages, as thought they are one section. I believe this is because I am in word processing mode. My question is, can I convert the document to layout mode so that each page represents it's own section, without losing what work I've already done? And if so, how?
The document is entirely text boxes and images, so I don't have any need for word processing space. I just need new pages to act as blank templates for the text boxes and images I create.
Is it possible to keep all my work as is, and convert the document to layout mode vs. word processing mode?
Thanks!

It just selects all the pages, as thought they are one section.
That's because they are one section. You must insert section breaks to separate them. There is no need to use page layout which does make each page a separate section. You have to manually add each page & use text boxes or other containers for the text & link the text boxes.

Pages 5: Send shape to back in word processing mode

Using Pages 5.2:
In word processing mode, how can I add a shape and send it to the back?
The only way I've found is to 'move object to section master' but this, of course, causes it to appear on all section pages. I could hack up the document to create sections of the pages I want shapes in the background but I need the sections to work as proper sections.
I want to achieve a design like the attached image, where the white 'Executive Summary' text is in the main text flow in word-processing mode.
Is this possible in word processing mode?
(I can achieve it by adding another text box like I have done in the image attached but when I create the table of contents, it only recognises paragraph styles that are used in the main flow of text in word processing mode, not those used in text boxes).
Thanks for any advice

Hi Jerry,
I'd considered this though it felt like an ugly hack and I was holding out for a 'proper' way to do it! - That said, many thanks for your advice and confirming it looks like the best option, I'll do it like you suggest. I've submitted it as a feature request anyhow.
Matt

Mixed Page Layout and Word Processing Modes

Hi Everyone, I find myself increasingly using Pages 09 in word processing mode then creating a new document in Page layout mode to create a front cover for that document.
Is it possible to combine the two modes and therefore having only one file to deal with.
Thanks in advance

PeterBreis0807 wrote:
There is no background in Page Layout mode, just stacked objects, repeated over and over to make the document grow fat beyond belief.
Wrong! The picture which is stored in the captured page is not repeated over and over in the document.
It is stored only once exactly as a background image.
In *Page layout mode* facing pages is broken, all that switches from left to right is the footer and header.
Perfectly normal behavior.
It's the same in Word processing format.
The setting of margins for facing pages apply to three items:
main text layer
header
footer
It doesn't apply to floating items.
In Layout document there is no main text layer so the margins apply logically only to header and feater.
So the truth is that nothing is broken.
It just don't behave the way you wrongly assumed.
Yvan KOENIG (from FRANCE vendredi 26 juin 2009 12:37:56)

BDC Processing Mode Problem

Similar Messages

Maybe you are looking for