BDC with disabled fields

Hi all,
I'm writing a BDC program for a transaction that might contain disabled fields. At run time I can't determine wich fields are disabled so the BDC doesn't work when I try to write in a those fields. Does anyone know how I can solve this issue?

"Blind Data Carry" - that's a new one on me... it used to be Batch Data Communication!
When you say "can't determine which fields are disabled", well generally you can do this - but it may require a lot of code and database lookups i.e. SAP itself determines which fields to block at runtime depending on configuration and data values and other switches therefore it should be technically possible to anticipate which are open for input and which are not. If you chat to your functional guys, they can often give you broad business rules that might help e.g. "Balance Sheet GL accounts won't have Cost Centre open for input" which may help you write something a little easier. You're likely to have the same problem with BAPIs - if you provide data values that are not required the BAPI may issue an error too.
Which transactions are you trying to BDC into?
Jonathan

Similar Messages

The Adobe Forms was created with Disable Fields!

Hi All,
I am new in Adode Interactive Forms ABAP. I am trying to implement a simple scenario using Web Services published by RFC on ABAP side and simple form with one field MATNR to bring a Description MARKT, and button to call the Web Services. I configured ADS on Server, installed Adobe LifeCycle 8 and SAP GUI 7.1. I created the Adobe Form and it was actived.
My issue is, when a run the program to generate a PDF, using the FMu2019s 'FP_JOB_OPEN'
, 'FP_FUNCTION_MODULE_NAME', CALL FUNCTION i_funcname, the Adobe Forms was created with disables fields. I canu2019t fill it and canu2019t press the button to call WS on ECC.
Could you help me?
Thank you!
Fábio Ferri
SAP Consultant Netweaver

Hi fabio,
When you say the example ran successfully is it without any error messages..?
Did you check in spool "SP01" if there something sitting out there.
To my understanding PDF rendring is dependent in 2 aspects.
1) the output device type you select (this should be a PDF enabled printer)
2) Programatically if you say it should go to a printer or spool.
Just try with FP_TEST_00 either in sfp or SE38 and try both print preview and print.
in print priview it should display the PDF on the screen.
In print it should display as success message and in spool it should have the corresponding PDF. if both are working fine then the ADS and output device config are correct and it all depends on how do you handle the PDF output.
Just try the above approach and post the results,
Cheers,

Need help with disabling fields or hiding rows based on previous field

Hi,
I have a report in a region.
The report has five columns:
Animal type_ Health Issues* Angel Grant Requested?* Granted?* Grant Response Date*
Dog Fleas Yes Yes 02/04/2009
Cat Fleas No
The first time the screen is displayed only the Animal type_ Health Issues* Angel Grant Requested?* columns will appear.
The user will make a selection for 'Angel Grant Requested' from the LOV ('YES', 'NO') and then click on the 'Submit' button.
When the screen returns 'Angel Grant Requested?' will be grayed out so the user cannot change the selection. The user will make a selection for 'Granted?' using LOV ('YES, 'NO') and for 'Grant Response Date' using the calendar.
{color:#ff0000}{color:#0000ff}Here is what I want to do...
If the user selects 'NO' for 'Angel Grant Requested?' then I would like to do one of the following (which ever one is easiest to do) when the screen returns:
1. Disable (gray out) the 'Granted?' and 'Grant Response Date' fields on the screen for the rows that have 'NO' for 'Angel Grant Requested?'
so that the user cannot make any selection, AND update the HEALTH_ISSUES table to
set grant_granted = 'N/A'
grant_response_date = sysdate
WHERE animal_issue_type_id = AI_ID;
2. Do not display the rows that have 'NO' for 'Angel Grant Requested?'
{color}
Can you please provide code samples to do this?
{color:#ff0000}*I tried to use javascript to gray out the columns, the problem I have is with the hidden f02 column (Angel Grant Requested) that I created on the report so that javascript could read the value. columns are being disabled as desired but the database table is not updating properly...*
{color:#ff0000}*For the rows where the user selected 'YES' for 'Angel Grant Requested?' we need to update the table with the 'Granted?' and 'Grant Response Date' values. These values are somehow being put on the row where the user selected 'NO' for 'Angel Grant Requested?'.*
This happens in the UPDATE_ISSUES PL/SQL after When :P6_DSP_REQUESTED = 'DSPGRANTED'{color}
Below is the Javascript function that is in HTML HEADER:_
</script>
<script language="JavaScript1.1" type="text/javascript">
function checkAngelGrant()
var col2=document.forms[0].f02; /* angel grant requested */
var col3=document.forms[0].f03; /* angel grant granted */
var col4=document.forms[0].f04; /* grant response date */
for (i=0;i<col2.length;i++)
var col2Check = col2+.value; /* read the hidden angel grant requested field */+
+/* checks the hidden angel grant requested field+
if no then we need to disable the angel grant granted field and the angel response date field.
if (col2Check == 'NO')
+{+
col3.disabled=true; /* angel grant granted (Yes No) */
col4.disabled=true; /* angel response date
Below is the UPDATEISSUES PL/SQL process that is run on After Submit:_*
DECLARE
ai_id NUMBER;
vgrant_requested VARCHAR2(3);
vgrant_grnted VARCHAR2(3);
vgrant_respdate DATE;
f01 = Animal Issue Type ID
f02 = grant requested ('YES','NO')
F03 = grant granted ('YES','NO')
F04 = grant response date
P6_DSP_REQUESTED = DSPGRANTED display region with grant_granted and grant_respdate
P6_DSP_REQUESTED = DSPREQUESTED display region with grant_requested only
P6_DSP_REQUESTED = BIFNOCHG cannot change any of the fields that have already been set
BEGIN
IF :P6_DSP_BEQUESTED = 'DSPREQUESTED' then -- Allow setting of grant_requested value only
FOR i IN 1..HTMLDB_APPLICATION.G_F01.COUNT LOOP
ai_id := HTMLDB_APPLICATION.G_F01(i); -- animal_issue_type_id This is hidden
vgrant_requested := HTMLDB_APPLICATION.G_F02(i); -- grant_requested (YES or NO)
UPDATE HEALTH_ISSUE_TYPES
SET grant_requested = vgrant_requested
WHERE animal_issue_type_id = AI_ID;
COMMIT;
END LOOP;
elsif :P6_DSP_REQUESTED = 'DSPGRANTED' then -- grant_granted and grant_response_date
FOR i IN 1..HTMLDB_APPLICATION.G_F01.COUNT LOOP
ai_id := HTMLDB_APPLICATION.G_F01(i); -- animal_issue_type_id This is hidden
vgrant_grnted := HTMLDB_APPLICATION.G_F02(i); -- grant_granted (YES or NO)
vgrant_respdate := to_date(HTMLDB_APPLICATION.G_F03(i),'MM/DD/YYYY');
UPDATE HEALTH_ISSUE_TYPES
SET grant_granted = vgrant_grnted,
grant_response_date = vgrant_respdate
WHERE animal_issue_type_id = AI_ID;
COMMIT;
END LOOP;
end if;
END;

It's actually three reports that get run during different stages of the screen.
When the user first enters the screen the data is populated from the REQUESTED REPORT sql:
SELECT hit.animal_issue_type_id, at.animal_type_desc, it.issue_type_desc, hit.grant_requested
FROM health_issue_types hit, animal_types at,issue_types it
WHERE hit.animal_type_id = at.animal_type_id
AND hit.issue_type_id = it.issue_type_id
AND hit.file_no = :P6_FILE_NO;
The user will make a selection from the LOV select list (Yes, No) for the grant_requested field and then click on the Submit button.
{color:#ff0000}*If the user selects 'NO' for this field then I want to disable the grant_granted and grant_response_date fields when the screen is populated from the ISSUES REPORT sql. If this cannot be easily done then I would like to hide the entire row when 'NO' has been selected for the grant_requested field.*{color}
When the screen returns the data is populated from the ISSUES REPORT sql:
ISSUES REPORT
SELECT hit.animal_issue_type_id, at.animal_type_desc, it.issue_type_desc, hit.grant_requested,
hit.grant_granted, hit.grant_response_date
FROM health_issue_types hit, animal_types at,issue_types it
WHERE hit.animal_type_id = at.animal_type_id
AND hit.issue_type_id = it.issue_type_id
AND hit.file_no = :P6_FILE_NO;
At this point the grant_requested field will no longer be available for user modification. The user will make a selection from the LOV select list (Yes, No) for the grant_granted, and the grant_response_date fields and then click on the Submit button again.
When the screen returns the data is populated from the ANIMAL DISPLAY ONLY REPORT sql:
ANIMAL DISPLAY ONLY REPORT
SELECT hit.animal_issue_type_id, at.animal_type_desc, it.issue_type_desc, hit.grant_requested,
hit.grant_granted, hit.grant_response_date
FROM health_issue_types hit, animal_types at, issue_types it
WHERE hit.animal_type_id = at.animal_type_id
AND hit.issue_type_id = it.issue_type_id
AND hit.file_no = :P6_FILE_NO;
At this point the grant_requested, grant_granted, and grant_response_date fields will no longer be available for user modification.
{color:#0000ff}Thank you for taking the time to look at my problem.{color}

Disable field with JeditorPane

Hi, i ve a simple problem : impossible to show a disabled field in a form contained in my JEditorPane component. : i can clic on a button or a text area even if it s disable (disable attribute in HTML code). Please tell me how to do.

not anwsered.

Bdc with oops

Hi iam new to abap objects. I was interested in bdc with oops. If any one knows the procedure send me, if possible with any sample code.................

this can be helpful.
OOPs ABAP uses Classes and Interfaces which uses Methods and events.
If you have Java skills it is advantage for you.
There are Local classes as well as Global Classes.
Local classes we can work in SE38 straight away.
But mostly it is better to use the Global classes.
Global Classes or Interfaces are to be created in SE24.
SAP already given some predefined classes and Interfaces.
This OOPS concepts very useful for writing BADI's also.
So first create a class in SE 24.
Define attributes, Methods for that class.
Define parameters for that Method.
You can define event handlers also to handle the messages.
After creation in each method write the code.
Methods are similar to ABAP PERFORM -FORM statements.
After the creation of CLass and methods come to SE38 and create the program.
In the program create a object type ref to that class and with the help of that Object call the methods of that Class and display the data.
Example:
REPORT sapmz_hf_alv_grid .
Type pool for icons - used in the toolbar
TYPE-POOLS: icon.
TABLES: zsflight.
To allow the declaration of o_event_receiver before the
lcl_event_receiver class is defined, decale it as deferred in the
start of the program
CLASS lcl_event_receiver DEFINITION DEFERRED.
G L O B A L I N T E R N A L T A B L E S
*DATA: gi_sflight TYPE STANDARD TABLE OF sflight.
To include a traffic light and/or color a line the structure of the
table must include fields for the traffic light and/or the color
TYPES: BEGIN OF st_sflight.
INCLUDE STRUCTURE zsflight.
Field for traffic light
TYPES: traffic_light TYPE c.
Field for line color
types: line_color(4) type c.
TYPES: END OF st_sflight.
TYPES: tt_sflight TYPE STANDARD TABLE OF st_sflight.
DATA: gi_sflight TYPE tt_sflight.
G L O B A L D A T A
DATA: ok_code LIKE sy-ucomm,
Work area for internal table
g_wa_sflight TYPE st_sflight,
ALV control: Layout structure
gs_layout TYPE lvc_s_layo.
Declare reference variables to the ALV grid and the container
DATA:
go_grid TYPE REF TO cl_gui_alv_grid,
go_custom_container TYPE REF TO cl_gui_custom_container,
o_event_receiver TYPE REF TO lcl_event_receiver.
DATA:
Work area for screen 200
g_screen200 LIKE zsflight.
Data for storing information about selected rows in the grid
DATA:
Internal table
gi_index_rows TYPE lvc_t_row,
Information about 1 row
g_selected_row LIKE lvc_s_row.
C L A S S E S
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
handle_toolbar FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING
e_object e_interactive,
handle_user_command FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING e_ucomm.
ENDCLASS.
CLASS lcl_event_receiver IMPLEMENTATION
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_toolbar.
Event handler method for event toolbar.
CONSTANTS:
Constants for button type
c_button_normal TYPE i VALUE 0,
c_menu_and_default_button TYPE i VALUE 1,
c_menu TYPE i VALUE 2,
c_separator TYPE i VALUE 3,
c_radio_button TYPE i VALUE 4,
c_checkbox TYPE i VALUE 5,
c_menu_entry TYPE i VALUE 6.
DATA:
ls_toolbar TYPE stb_button.
Append seperator to the normal toolbar
CLEAR ls_toolbar.
MOVE c_separator TO ls_toolbar-butn_type..
APPEND ls_toolbar TO e_object->mt_toolbar.
Append a new button that to the toolbar. Use E_OBJECT of
event toolbar. E_OBJECT is of type CL_ALV_EVENT_TOOLBAR_SET.
This class has one attribute MT_TOOLBAR which is of table type
TTB_BUTTON. The structure is STB_BUTTON
CLEAR ls_toolbar.
MOVE 'CHANGE' TO ls_toolbar-function.
MOVE icon_change TO ls_toolbar-icon.
MOVE 'Change flight' TO ls_toolbar-quickinfo.
MOVE 'Change' TO ls_toolbar-text.
MOVE ' ' TO ls_toolbar-disabled.
APPEND ls_toolbar TO e_object->mt_toolbar.
ENDMETHOD.
METHOD handle_user_command.
Handle own functions defined in the toolbar
CASE e_ucomm.
WHEN 'CHANGE'.
PERFORM change_flight.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMETHOD.
ENDCLASS.
S T A R T - O F - S E L E C T I O N.
START-OF-SELECTION.
SET SCREEN '100'.
*& Module USER_COMMAND_0100 INPUT
MODULE user_command_0100 INPUT.
CASE ok_code.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
MODULE status_0100 OUTPUT.
DATA:
For parameter IS_VARIANT that is sued to set up options for storing
the grid layout as a variant in method set_table_for_first_display
l_layout TYPE disvariant,
Utillity field
l_lines TYPE i.
After returning from screen 200 the line that was selected before
going to screen 200, should be selected again. The table gi_index_rows
was the output table from the GET_SELECTED_ROWS method in form
CHANGE_FLIGHT
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines > 0.
CALL METHOD go_grid->set_selected_rows
EXPORTING
it_index_rows = gi_index_rows.
CALL METHOD cl_gui_cfw=>flush.
REFRESH gi_index_rows.
ENDIF.
Read data and create objects
IF go_custom_container IS INITIAL.
Read data from datbase table
PERFORM get_data.
Create objects for container and ALV grid
CREATE OBJECT go_custom_container
EXPORTING container_name = 'ALV_CONTAINER'.
CREATE OBJECT go_grid
EXPORTING
i_parent = go_custom_container.
Create object for event_receiver class
and set handlers
CREATE OBJECT o_event_receiver.
SET HANDLER o_event_receiver->handle_user_command FOR go_grid.
SET HANDLER o_event_receiver->handle_toolbar FOR go_grid.
Layout (Variant) for ALV grid
l_layout-report = sy-repid. "Layout fo report
Setup the grid layout using a variable of structure lvc_s_layo
Set grid title
gs_layout-grid_title = 'Flights'.
Selection mode - Single row without buttons
(This is the default mode
gs_layout-sel_mode = 'B'.
Name of the exception field (Traffic light field) and the color
field + set the exception and color field of the table
gs_layout-excp_fname = 'TRAFFIC_LIGHT'.
gs_layout-info_fname = 'LINE_COLOR'.
LOOP AT gi_sflight INTO g_wa_sflight.
IF g_wa_sflight-paymentsum < 100000.
Value of traffic light field
g_wa_sflight-traffic_light = '1'.
Value of color field:
C = Color, 6=Color 1=Intesified on, 0: Inverse display off
g_wa_sflight-line_color = 'C610'.
ELSEIF g_wa_sflight-paymentsum => 100000 AND
g_wa_sflight-paymentsum < 1000000.
g_wa_sflight-traffic_light = '2'.
ELSE.
g_wa_sflight-traffic_light = '3'.
ENDIF.
MODIFY gi_sflight FROM g_wa_sflight.
ENDLOOP.
Grid setup for first display
CALL METHOD go_grid->set_table_for_first_display
EXPORTING i_structure_name = 'SFLIGHT'
is_variant = l_layout
i_save = 'A'
is_layout = gs_layout
CHANGING it_outtab = gi_sflight.
*-- End of grid setup -
Raise event toolbar to show the modified toolbar
CALL METHOD go_grid->set_toolbar_interactive.
Set focus to the grid. This is not necessary in this
example as there is only one control on the screen
CALL METHOD cl_gui_control=>set_focus EXPORTING control = go_grid.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0200 INPUT
MODULE user_command_0200 INPUT.
CASE ok_code.
WHEN 'EXIT200'.
LEAVE TO SCREEN 100.
WHEN'SAVE'.
PERFORM save_changes.
ENDCASE.
ENDMODULE. " USER_COMMAND_0200 INPUT
*& Form get_data
FORM get_data.
Read data from table SFLIGHT
SELECT *
FROM zsflight
INTO TABLE gi_sflight.
ENDFORM. " load_data_into_grid
*& Form change_flight
Reads the contents of the selected row in the grid, ans transfers
the data to screen 200, where it can be changed and saved.
FORM change_flight.
DATA:l_lines TYPE i.
REFRESH gi_index_rows.
CLEAR g_selected_row.
Read index of selected rows
CALL METHOD go_grid->get_selected_rows
IMPORTING
et_index_rows = gi_index_rows.
Check if any row are selected at all. If not
table gi_index_rows will be empty
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines = 0.
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
EXPORTING
textline1 = 'You must choose a line'.
EXIT.
ENDIF.
Read indexes of selected rows. In this example only one
row can be selected as we are using gs_layout-sel_mode = 'B',
so it is only ncessary to read the first entry in
table gi_index_rows
LOOP AT gi_index_rows INTO g_selected_row.
IF sy-tabix = 1.
READ TABLE gi_sflight INDEX g_selected_row-index INTO g_wa_sflight.
ENDIF.
ENDLOOP.
Transfer data from the selected row to screenm 200 and show
screen 200
CLEAR g_screen200.
MOVE-CORRESPONDING g_wa_sflight TO g_screen200.
LEAVE TO SCREEN '200'.
ENDFORM. " change_flight
*& Form save_changes
Changes made in screen 200 are written to the datbase table
zsflight, and to the grid table gi_sflight, and the grid is
updated with method refresh_table_display to display the changes
FORM save_changes.
DATA: l_traffic_light TYPE c.
Update traffic light field
Update database table
MODIFY zsflight FROM g_screen200.
Update grid table , traffic light field and color field.
Note that it is necessary to use structure g_wa_sflight
for the update, as the screen structure does not have a
traffic light field
MOVE-CORRESPONDING g_screen200 TO g_wa_sflight.
IF g_wa_sflight-paymentsum < 100000.
g_wa_sflight-traffic_light = '1'.
C = Color, 6=Color 1=Intesified on, 0: Inverse display off
g_wa_sflight-line_color = 'C610'.
ELSEIF g_wa_sflight-paymentsum => 100000 AND
g_wa_sflight-paymentsum < 1000000.
g_wa_sflight-traffic_light = '2'.
clear g_wa_sflight-line_color.
ELSE.
g_wa_sflight-traffic_light = '3'.
clear g_wa_sflight-line_color.
ENDIF.
MODIFY gi_sflight INDEX g_selected_row-index FROM g_wa_sflight.
Refresh grid
CALL METHOD go_grid->refresh_table_display.
CALL METHOD cl_gui_cfw=>flush.
LEAVE TO SCREEN '100'.
ENDFORM. " save_changes
chk this blog
/people/vijaybabu.dudla/blog/2006/07/21/topofpage-in-alv-using-clguialvgrid
with regards,
Hema SUndara.

How do you grey out/disable fields under a radio button if another radio button is selected in Adobe Acrobat XI Pro?

How do you grey out/disable fields under a radio button if another radio button is selected in Adobe Acrobat XI Pro?
I’m creating a form where the user has three options to make a payment.
1. charge to my credit card
2. charge associated costs to bank account
3. By cheque or money order
My Problem is, under each option, there are required fields that has to be filled out. So if the user picks the first option, charge to my credit card, they would fill out the required fields (credit card number, expiration date etc.). But when they click submit button to submit the form, it won’t let them, because there are required fields under the second option. Also, I have the radio buttons for the three options setup so that if the user holds the shift key and clicks a radio button, it unchecks it. So what I'm trying to do is this: If the user selects the radio button for option 1, the other two options are greyed out/disabled. And if the user holds down the shift key and clicks radio button for option one again, it unchecks the radio button and the other two options are available again. Is there a way to grey out or disable the two other payment options when the other one is picked. I’m assuming I will have to use javascript, but what would the coding be and which field do I write it under?
Thanks in advance guys

You will have to use custom JavaScript to access the various properties of the field object.
The radio button group has a value. When no button is selected that value is "Off". When an individual button has been selected the value for the group will be the option or export value for that individual button.
Once you have determined the button selected, then you will know the form fields that need to be made required. You use JavaScript to access those fields and change the "read only" property to false, and set the "required" property to true. For the fields associated with the other options, those fields should be reset, made read only, and have the "required" property set to false.
Disabling (graying-out) Form Fields
>> Also, I have the radio buttons for the three options setup so that if the user holds the shift key and clicks a radio button, it unchecks it.
Radio button in a PDF do not work that way. Only check boxes can be unchecked by clicking on one that has been checked.
If you plan the coding for the Mouse UP action to test for all possible options and code for each of those options you should have what you want.
If you want actual code you need to provide a lot more details.
It is even possible to perform some credit card and bank routing number validations with JavaScript and some check digit formulas.

How to disable fields in Table control???

Hi
How to disable fields in Table control??? I want to disable particular row in table control when enter datas are correct.lets take as example ME41 or ME51 table control.
Can anyone tell how to do disable in this table control
Points will be rewarded if its helpful.
Thanks
senthil

If you want to disable the row then you can use
in pbo module create a module in side loop,
loop at itab with control tc.
module change_screen.
endloop.
in module,,,,,
loop at screen.
if condition.
screen-input = 0.
modify screen.
endif.
endloop.
Regards
Vijay

Disable fields in search help restriction window

Hi Experts,
Here is the situation:
I have created the new search help for material number and assigned this search help in my module pool program.
As soon as user press F4 button on material number , it will display search help restrictions window with 4 fields ( material, material type, plant, plant status).
I have set default value for the material type in search help itself. But I would like to disable this field.
I mean .... user should not enter any other values other than my default value. So I should disable the material type field in searh help restrictions window.
Pls help me.
Thanks
Raghu

Hi Vinod,
In the FM F4IF_INT_TABLE_VALUE_REQUEST, pass exporting parameter callback_form = 'SUB_CALL_BACK'.
Define the sub routine with the SUB_CALL_BACK with below logic
        FORM SUB_CALL_BACK TABLES record_tab STRUCTURE seahlpres
                                               CHANGING shlp      TYPE           shlp_descr
                                                                 callcontrol TYPE DDSHF4CTRL.
               callcontrol-MULTISEL = 'X'.
         ENDFORM.
Hope it helps.
Regards
Gangadhar

Send via e-mail an interactive PDF with filled fields and signature

Hallo all,
I have this problem: i create a PDF DOC with some fields that can be filled (like name, address, and so on).
Well, when i have finished filling the fields and I have also signed the DOC ( very good feature) I want to save or almost Send it by mail.
The DOC is correctly sent...BUT I RECEIVE A DOC NOT FILLED, WITHOUT ALL THE DATA and the SIGNATURE!
Were is my mistake?
Thanks for your help
Ciao
Fabio

Some forms do not display correctly in the Desktop Reader if field highlighting is enabled. This is something we're actively working on, but you might try disabling field highlights by clicking on the button in the purple bar at the top of the Document in the Desktop Reader to see if that helps.
Can you please share the file? You can email it to [email protected] This way we can get a better idea what is happening.
Thanks!
Pat

Using Javascript to disable field "Planned"

Hi every one,
I want to use javascript to disable "Planned" checkbox in Project Server 2013 because we want that user can not see this planned time and be confused with the Project Server's automatic changes for the planned time.
<script type="text/javascript">
document.getElementById("Ribbon.ContextualTabs.MyWork.Home.ShowHide.PlannedWork-Medium-checkbox").checked = false;
</script>
I found this code in this subject :
http://social.technet.microsoft.com/Forums/projectserver/en-US/0beeed2d-bebc-4217-981a-41b1252c7cc2/disable-field-planned-in-timesheet?forum=projectserver2010general
But I don't understand where to use it. If i create a custom webpart with this code, I've got a null exception when the page is loading.
So, can you help me ? Maybe I need to use it in an other file ?

Hi Patmol6,
Basically, to add javascript to a PDP (or timesheet page for instance),
edit the page
add the content editor webpart
set it as hidden
copy paste the code
Note that you can also point from the content editor webpart to a js file embedding the javascript code
Here are few examples (some are in PS2007, but the process is similar):
http://epmsource.com/tag/content-editor-webpart/
http://badalratra.wordpress.com/2013/05/04/how-to-disable-pdp-custom-fields-using-javascript/
http://badalratra.wordpress.com/2013/02/03/javascript-code-to-add-custom-descriptions-underneath-project-field-on-the-pdp-page/
http://epmcorner.wordpress.com/tag/content-editor-web-part/
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Why I cannot process a disabled field when using htmldb_item

I have a report that has this in the select statement
case when c.sec_lic_status in (1,2,7,505,1002,1004,1005) then
htmldb_item.text(2,sum( distinct a.fee_variable),8,20)
else
htmldb_item.text(2,sum( distinct a.fee_variable),8,20,'disabled')
end "Quantity 1"
The above shows correctly. If there are 2 records one field is disable and the other is enabled.
I have a process that fires on submit - after Computations and Validations. But the records don't changed when updating the enabled one.
In debugging and writing to a file using the UTL_FILE package, I'm able to pinpoint that the disable fields are the problem.
Is there a trick on manually processing disabled fields?
I've found that when I uncheck the show box in the report, I cannot use the fields either. This is not a problem, just another comment.
My main problem is what do I have to do to manually process a disabled field.
Thanks for your help, comments, pointers, or anything that could help me or give me ideas.
juan

Juan - HTML items with the disabled attribute are not POSTed with the form so your after-submit processes never see them. Try 'readonly="readonly"' instead. Others may be able to suggest how to also give those cells a greyed-out appearance.
Scott

BDC with MM01/ MM02 from MARA table

Can anybody suggest me for the following problem.
I want to construct a BDC with MM01/ MM02 from MARA table.
And I want the source file to be a notepad or Excel sheet. But i am not
getting, that how to write the data in Notepad/Excel sheet, to feed to the
master table according to the MM01/MM02 fields .

This is the sample code for creation of flatfile for MM01 this will be definetly helping you to create a flatfile.
REPORT ZBDC_FF MESSAGE-ID BCTRAIN .
TYPES: BEGIN OF STU,
       MATNR LIKE RMMG1-MATNR,
       MBRSH LIKE RMMG1-MBRSH,
       MTART LIKE RMMG1-MTART,
       MAKTX LIKE MAKT-MAKTX,
       MEINS LIKE MARA-MEINS,
       END OF STU.
DATA WA_ITAB TYPE STU.
DATA ITAB TYPE TABLE OF STU.
WA_ITAB-MATNR = 'T1'.              "MATERIAL NUMBER"
WA_ITAB-MBRSH = 'K'.                 "INDUSTRY SECTOR"
WA_ITAB-MTART = 'VKHM'.              "MATERIAL TYPE"
WA_ITAB-MAKTX = 'TOOLEMATERIAL'.     "MATERIAL DESCRIPTION"
WA_ITAB-MEINS = 'EE'.                "BASE UNIT OF MEASURE"
APPEND WA_ITAB TO ITAB.
CLEAR WA_ITAB.
*WA_ITAB-MATNR = 'TOL2'.              "MATERIAL NUMBER"
*WA_ITAB-MBRSH = 'M'.                 "INDUSTRY SECTOR"
*WA_ITAB-MTART = 'VKHM'.              "MATERIAL TYPE"
*WA_ITAB-MAKTX = 'TOOLEMATERIAL'.     "MATERIAL DESCRIPTION"
*WA_ITAB-MEINS = 'EA'.                "BASE UNIT OF MEASURE"
*APPEND WA_ITAB TO ITAB.
*CLEAR WA_ITAB.
*WA_ITAB-MATNR = 'TOL3'.              "MATERIAL NUMBER"
*WA_ITAB-MBRSH = 'M'.                 "INDUSTRY SECTOR"
*WA_ITAB-MTART = 'VKHM'.              "MATERIAL TYPE"
*WA_ITAB-MAKTX = 'TOOLEMATERIAL'.     "MATERIAL DESCRIPTION"
*WA_ITAB-MEINS = 'EA'.                "BASE UNIT OF MEASURE"
*APPEND WA_ITAB TO ITAB.
*CLEAR WA_ITAB.
*WA_ITAB-MATNR = 'TOL4'.              "MATERIAL NUMBER"
*WA_ITAB-MBRSH = 'M'.                 "INDUSTRY SECTOR"
*WA_ITAB-MTART = 'VKHM'.              "MATERIAL TYPE"
*WA_ITAB-MAKTX = 'TOOLEMATERIAL'.     "MATERIAL DESCRIPTION"
*WA_ITAB-MEINS = 'EA'.                "BASE UNIT OF MEASURE"
*APPEND WA_ITAB TO ITAB.
*CLEAR WA_ITAB.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME     = 'C:\Documents and Settings\chiranjeevi\Desktop\BDC.TXT'
TABLES
    DATA_TAB     = ITAB
IF SY-SUBRC <> 0.
MESSAGE S999 WITH 'EXECUTED'.
ENDIF.
Cheers!!!

Need to Disable field in Table maintenance generator

Hi Frds,
I have created a custom table .But i stuck at one point. In the TMG one field is User ID and next field is filled with Full name of this User ID(made it noneditable). To get user name i implement '01' event in TMG. and its working fine. But when i change the user ID in the row ramdamly the user name is not updated. its because Event not trigger.
Please help me by giving valuable suggestion either of two query.
1) When any row field value get change. Which TMG event trigger and capture the changed row
2) How can i make field disable once it get filled and saved.
Thanks
Imran

Hi,
When you create any entry in TMG event get occurred is 05 and if you are changing any row content than you have to use 01. And if you want to disable fields ,double click on overview screen number which is you have given when you created TMG and than it opens flow logic of screen than click on Element List tab and uncheck the fields which you wants dsiable in input column as i am attaching screenshot have a look at it.
in this user ID is unchecked.
Regards,
Shahezad

How to set a value to a disabled field in an B1 screen ?

Hi,
Can anyone tell me how to set a value to a disabled field in an existing screen.
For example , I want to set a value to the Paid/Credited field in the Sales - A/R Invoice screen, which is a disabled field.
I tried setting the field as enabled but it throws an error.
Thanks in advance
Mina

It depends on the business process required for generating the invoice. (What is this process just now?)
I can think on quite a few ideas, but can't be sure if any of them will match your specific requirements. I'll list a few here and see if any of them might work, or at least generate some new ideas for you. (Unfortunately you can't change an existing payment object to add an invoice to it at a later date, nor is the reconciliation process exposed through the SDK. This limits your options a bit.)
1) Is there a need for a separate delivery and invoice? Would skipping the delivery process and using the standard Invoice + Payment screen work for you? Stock would be issued, invoice created and payment matched directly to invoice without any work.
2) This might apply if the invoice is simply a one for one match with the delivery. Rather than just generate a payment in the delivery screen, generate the invoice and a payment at the same time. The standard invoice screen will then show it as paid. You can control the dates on the invoice raised through DI code.
3) Where do you write the Paid Amount to? How is it not available in the invoice screen? Put it somewhere accessible and write it to the user field.
John.

BDC WITH ME51!!

HELLO
I HAVE CREATED A BDC WITH ME51,I AM FACING A PROBLEM WITH IT.IN THE ITEM DATA THE SECOND RECORD IS GETTING OVERWRITTEN BY THE 3RD RECORD DATA.PLEASE GIVE ME A SOLUTION.THE CODE GOES AS BELOW..........TELL ME WHERE I AM GOING WRONG.
REPORT Z_BDC_ME51_CALLTRANSACTION NO STANDARD PAGE HEADING LINE-SIZE 255.
TABLES: EBAN,RM06B.
*include bdcrecx1.
DATA:   T_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
DATA:   MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE .
DATA : BEGIN OF T_UPLOAD OCCURS 0 ,
        BSART LIKE EBAN-BSART ,
        EEIND LIKE RM06B-EEIND ,
        LPEIN LIKE RM06B-LPEIN ,
        WERKS LIKE EBAN-WERKS ,
        LGORT LIKE EBAN-LGORT ,
        EKGRP LIKE EBAN-EKGRP ,
        MATKL LIKE EBAN-MATKL ,
        MATNR LIKE EBAN-MATNR ,
        MENGE(10) ,
       END OF T_UPLOAD .
DATA : BEGIN OF T_HEADER OCCURS 0 ,
        BSART LIKE EBAN-BSART ,
        EEIND LIKE RM06B-EEIND ,
        LPEIN LIKE RM06B-LPEIN ,
        WERKS LIKE EBAN-WERKS ,
        LGORT LIKE EBAN-LGORT ,
        EKGRP LIKE EBAN-EKGRP ,
        MATKL LIKE EBAN-MATKL ,
       END OF T_HEADER ,
       BEGIN OF T_ITEM OCCURS 0 ,
        BSART LIKE EBAN-BSART ,
        MATNR LIKE EBAN-MATNR ,
        MENGE(10) ,
       END OF T_ITEM ,
       V1 TYPE SY-TABIX .
DATA : P_FLNAME LIKE RLGRAP-FILENAME VALUE 'D:\TEST_ME51.TXT' .
CALL FUNCTION 'UPLOAD'
EXPORTING
CODEPAGE                      = ' '
    FILENAME                      = 'D:\TEST_ME51.txt'
    FILETYPE                      = 'DAT'
ITEM                          = ' '
FILEMASK_MASK                 = ' '
FILEMASK_TEXT                 = ' '
FILETYPE_NO_CHANGE            = ' '
FILEMASK_ALL                  = ' '
FILETYPE_NO_SHOW              = ' '
LINE_EXIT                     = ' '
USER_FORM                     = ' '
USER_PROG                     = ' '
SILENT                        = 'S'
IMPORTING
FILESIZE                      =
CANCEL                        =
ACT_FILENAME                  =
ACT_FILETYPE                  =
TABLES
    DATA_TAB                      = T_UPLOAD
EXCEPTIONS
CONVERSION_ERROR              = 1
INVALID_TABLE_WIDTH           = 2
INVALID_TYPE                  = 3
NO_BATCH                      = 4
UNKNOWN_ERROR                 = 5
GUI_REFUSE_FILETRANSFER       = 6
OTHERS                        = 7
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
START-OF-SELECTION.
DATA : V_BSART LIKE EBAN-BSART .
LOOP AT T_UPLOAD.
   MOVE :
        T_UPLOAD-BSART TO T_HEADER-BSART,
        T_UPLOAD-EEIND TO T_HEADER-EEIND,
        T_UPLOAD-LPEIN TO T_HEADER-LPEIN,
        T_UPLOAD-WERKS TO T_HEADER-WERKS,
        T_UPLOAD-LGORT TO T_HEADER-LGORT,
        T_UPLOAD-EKGRP TO T_HEADER-EKGRP,
        T_UPLOAD-MATKL TO T_HEADER-MATKL.
   APPEND T_HEADER.
   V_BSART = T_UPLOAD-BSART.
   LOOP AT T_UPLOAD WHERE BSART = V_BSART.
     MOVE :
         T_UPLOAD-BSART TO T_ITEM-BSART ,
         T_UPLOAD-MENGE TO T_ITEM-MENGE,
         T_UPLOAD-MATNR TO T_ITEM-MATNR.
     APPEND T_ITEM.
     DELETE T_UPLOAD.
ENDLOOP.
ENDLOOP.
LOOP AT T_HEADER .
CLEAR T_BDCDATA .
REFRESH T_BDCDATA .
PERFORM BDC_DYNPRO      USING 'SAPMM06B' '0100'.
*PERFORM BDC_FIELD       USING 'BDC_CURSOR' 'RM06B-EEIND'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE' '/00'.
PERFORM BDC_FIELD       USING 'EBAN-BSART' T_HEADER-BSART.
PERFORM BDC_FIELD       USING 'RM06B-EEIND' T_HEADER-EEIND.
PERFORM BDC_FIELD       USING 'RM06B-LPEIN' T_HEADER-LPEIN.
PERFORM BDC_FIELD       USING 'EBAN-WERKS' T_HEADER-WERKS.
PERFORM BDC_FIELD       USING 'EBAN-LGORT' T_HEADER-LGORT.
PERFORM BDC_FIELD       USING 'EBAN-EKGRP' T_HEADER-EKGRP.
PERFORM BDC_FIELD       USING 'EBAN-MATKL' T_HEADER-MATKL.
*PERFORM BDC_FIELD       USING 'BDC_CURSOR' 'EBAN-MENGE(01)'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE' '/00'.
LOOP AT T_ITEM WHERE BSART EQ T_HEADER-BSART .
IF SY-TABIX EQ 1.
    PERFORM BDC_DYNPRO      USING 'SAPMM06B' '0106'.
    PERFORM BDC_FIELD       USING 'EBAN-MATNR(01)' T_ITEM-MATNR.
   PERFORM BDC_FIELD       USING 'EBAN-TXZ01(01)' ''.
    PERFORM BDC_FIELD       USING 'EBAN-MENGE(01)' T_ITEM-MENGE.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE' '/00'.
    PERFORM BDC_DYNPRO      USING 'SAPMM06B' '0102'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE' '/00'.
   PERFORM BDC_DYNPRO      USING 'SAPMM06B' '0106'.
   PERFORM BDC_FIELD       USING 'BDC_OKCODE' '/00'.
    ELSE .
    PERFORM BDC_DYNPRO      USING 'SAPMM06B' '0106'.
    PERFORM BDC_FIELD       USING 'EBAN-MATNR(02)' T_ITEM-MATNR.
   PERFORM BDC_FIELD       USING 'EBAN-TXZ01(01)' ''.
    PERFORM BDC_FIELD       USING 'EBAN-MENGE(02)' T_ITEM-MENGE.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE' '/00'.
    PERFORM BDC_DYNPRO      USING 'SAPMM06B' '0102'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE' '/00'.
   PERFORM BDC_DYNPRO      USING 'SAPMM06B' '0106'.
   PERFORM BDC_FIELD       USING 'EBAN-MA
    ENDIF .
ENDLOOP .
PERFORM BDC_FIELD       USING 'BDC_OKCODE' '=BU'.
*PERFORM BDC_FIELD       USING 'RM06B-BNFPO' '10'.
CALL TRANSACTION 'ME51' USING T_BDCDATA
                              MODE 'A'
                              UPDATE 'S'
                              MESSAGES INTO MESSTAB.
ENDLOOP .
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR T_BDCDATA.
T_BDCDATA-PROGRAM = PROGRAM.
T_BDCDATA-DYNPRO   = DYNPRO.
T_BDCDATA-DYNBEGIN = 'X'.
APPEND T_BDCDATA.
ENDFORM.
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> SPACE.
    CLEAR T_BDCDATA.
    T_BDCDATA-FNAM = FNAM.
    T_BDCDATA-FVAL = FVAL.
    APPEND T_BDCDATA.
ENDIF.
ENDFORM.
I AM USING BSART,EEIND,LPEIN, WERKS,LGORT,EKGRP,MATKL,MATNR,MENGE IN THE FLAT FILE.

The number in the brackets indicate the number of the line item, right?
So, if you are not incrementing that number, you are always overwriting your 2nd line item with the next line item.
So, as the loop goes, you should increment that number also so that when the BDC runs the materials are attached to different line numbers.
Outside the loop
DATA : counter(2) type n value '01'.
Inside the loop
counter = counter + 1.
concatenate 'EBAN-MATNR(' counter ')' into fieldmatnr.
PERFORM BDC_FIELD USING fieldmatnr = T_ITEM-MATNR.
concatenate 'EBAN-MENGE(' counter ')' into fieldmenge.
PERFORM BDC_FIELD USING fieldmenge T_ITEM-MENGE.
The above changes should solve your problem.
Regards,
Ravi
Note - Pleas emark all the helpful answes
Message was edited by:
        Ravikumar Allampallam
Message was edited by:
        Ravikumar Allampallam

BDC with disabled fields

Similar Messages

Maybe you are looking for