BDCs for Multiple tcodes
Hi Gurus,
I am struck with BDCs for multiple tcodes.
I know that multiple tcodes can be done only using session method.
Please help how to proceed.
Regards,
V S L Bharathi K
Hi,
Loop at itab1.
*fill BDCDATA table
call transaction 'XXXX' using mode l_mode
messages in mess_tab
*"Chk if any Error/Abort message in mess_tab
* get the value for next processing.
read table message_tab with key type ='S'
msg_class = 'XX'
msg_no = 'NNN'.
l_par = mess_tab-msg_v1.
refresh BDCDATA.
*again fill BDCDATA table
call transaction 'YYYY' using mode l_mode
messages in mess_tab
endloop.
Hope this helps.
Similar Messages
-
Hi friends.
I want to write BDc program for uploading Purchase orders.but problem is that PO has multiple line items and also there are many POs.
also i want flat file format for same If any one have program for same please send me on [email protected]
Please ..its urgent..
thanks.Hi,
For po - tcode me21n as it is an enjoy transaction sap suggests to use BAPI.
use BAPI_PO_CREATE1.
check this Sample code,
REPORT zpo_create .
PARAMETERS: p-file LIKE rlgrap-filename DEFAULT
'c:\demo3.txt'.
DATA: BEGIN OF itab OCCURS 0,
line(1000),
END OF itab.
DATA l_item(5) TYPE n.
TABLES : zerror.
DATA lcounter(3) TYPE n.
DATA : l_errflag.
DATA : l_po_header LIKE bapimepoheader.
DATA : l_po_headerx LIKE bapimepoheaderx.
DATA : t_po_account LIKE bapimepoaccount OCCURS 0 WITH HEADER LINE.
DATA : t_po_accountx LIKE bapimepoaccountx OCCURS 0 WITH HEADER LINE.
DATA : l_new_po(10), l_last_po(10).
DATA : l_purchaseorder LIKE bapimepoheader-po_number.
*DATA : L_HEADER LIKE BAPIMEPOHEADER STRUCTURE BAPIMEPOHEADER.
DATA : BEGIN OF t_po_items OCCURS 0.
INCLUDE STRUCTURE bapimepoitem.
DATA : END OF t_po_items.
DATA : BEGIN OF t_po_itemsx OCCURS 0.
INCLUDE STRUCTURE bapimepoitemx.
DATA : END OF t_po_itemsx.
DATA : BEGIN OF t_return OCCURS 0.
INCLUDE STRUCTURE bapiret2.
DATA : END OF t_return.
CLEAR : l_po_header.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = p-file
filetype = 'DAT'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
OTHERS = 6.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
EXIT.
ENDIF.
LOOP AT itab.
IF itab-line(1) EQ 'K'.
l_new_po = itab-line(10).
IF l_last_po NE l_new_po AND l_last_po NE space.
PERFORM create_po.
PERFORM refresh_table.
ENDIF.
IF itab-line+13(2) EQ '40'.
PERFORM append_header.
ENDIF.
IF itab-line+13(2) EQ '81'.
PERFORM append_item.
ENDIF.
l_last_po = l_new_po.
ENDIF.
ENDLOOP.
IF sy-subrc EQ 0.
PERFORM create_po.
PERFORM refresh_table.
ENDIF.
*& Form CREATE_PO
PO Create
--> p1 text
<-- p2 text
FORM create_po .
CLEAR : l_purchaseorder.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = l_po_header
poheaderx = l_po_headerx
POADDRVENDOR =
TESTRUN =
MEMORY_UNCOMPLETE =
MEMORY_COMPLETE =
POEXPIMPHEADER =
POEXPIMPHEADERX =
VERSIONS =
NO_MESSAGING =
NO_MESSAGE_REQ =
NO_AUTHORITY =
NO_PRICE_FROM_PO =
IMPORTING
exppurchaseorder = l_purchaseorder
EXPHEADER =
EXPPOEXPIMPHEADER =
TABLES
return = t_return
poitem = t_po_items
poitemx = t_po_itemsx
POADDRDELIVERY =
POSCHEDULE =
POSCHEDULEX =
poaccount = t_po_account
POACCOUNTPROFITSEGMENT =
poaccountx = t_po_accountx
POCONDHEADER =
POCONDHEADERX =
POCOND =
POCONDX =
POLIMITS =
POCONTRACTLIMITS =
POSERVICES =
POSRVACCESSVALUES =
POSERVICESTEXT =
EXTENSIONIN =
EXTENSIONOUT =
POEXPIMPITEM =
POEXPIMPITEMX =
POTEXTHEADER =
POTEXTITEM =
ALLVERSIONS =
POPARTNER =
l_errflag = space.
lcounter = 1.
LOOP AT t_return .
IF t_return-type = 'E'.
l_errflag = 'X'.
GET TIME.
PERFORM append_error.
ENDIF.
WRITE : /1 t_return-message.
ENDLOOP.
IF l_errflag EQ space.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT =
IMPORTING
RETURN =
ENDIF.
ENDFORM. " CREATE_PO
*& Form APPEND_HEADER
PO Header print
--> p1 text
<-- p2 text
FORM append_header .
l_po_header-comp_code = '1000'." Company Code
l_po_header-doc_type = 'NB'. " Order Typr BSART
l_po_header-creat_date = sy-datum. " P.O Dt - BEDAT
*CONCATENATE '0000' ITAB+72(6) INTO L_PO_HEADER-VENDOR .
l_po_header-vendor = itab-line+71(6).
*L_PO_HEADER-VENDOR = ITAB+72(6) " 'ABC'. "Vendor - EKKO-LIFNR
IF itab-line(4) NE 'K034'.
l_po_header-purch_org = '2000'. " Purch. Org - EKKO-EKORG
l_po_header-pur_group = 'F01'. " Purch Group - EKKO-EKGRP
ELSE.
l_po_header-purch_org = '1000'. " Purch. Org - EKKO-EKORG
l_po_header-pur_group = '001'. " Purch Group - EKKO-EKGRP
ENDIF.
l_po_header-currency_iso = 'USD'. " Currency Default field for Enjoy
l_po_header-ref_1 = itab-line+1(9).
*L_PO_HEADER-DOC_CAT = 'F'. " Account Assign Cat EKPO-KNTTP
*_PO_HEADER-CREATED_BY = SY-UNAME.
CLEAR : l_po_headerx.
l_po_headerx-po_number = 'X'.
l_po_headerx-comp_code = 'X'." Company Code
l_po_headerx-doc_type = 'X'. " Order Typr BSART
l_po_headerx-vendor = 'X'. "Vendor - EKKO-LIFNR
l_po_headerx-purch_org = 'X'. " Purch. Org - EKKO-EKORG
l_po_headerx-pur_group = 'X'. " Purch Group - EKKO-EKGRP
l_po_headerx-currency_iso = 'X'. " Currency Default field for Enjoy
l_po_headerx-ref_1 = 'X'.
ENDFORM. " APPEND_HEADER
*& Form APPEND_ITEM
Material Number and Item print
--> p1 text
<-- p2 text
FORM append_item .
PO Line Items
l_item = l_item + 10.
t_po_items-po_item = l_item.
*T_PO_ITEMS-PO_ITEM = '00010'." Line Item No - EKPO-EBELP
*T_PO_ITEMS-SHORT_TEXT = 'KSR TEXT'." Line Item TEXT
CONCATENATE '00000000' itab-line+32(10) INTO t_po_items-material.
*T_PO_ITEMS-MATERIAL = '000000000000000043'. " Material No - EKPO-EMATN
CONCATENATE '00000000' itab-line+32(10) INTO t_po_items-ematerial.
t_po_items-plant = '2001'. " Plant - EKPO-WERKS
t_po_items-quantity = '1.000'.
t_po_items-net_price = '10.00'. " EKPO-NETPR
t_po_items-price_unit = '10 '.
*T_PO_ITEMS-TAX_CODE = 'A2'.
IF itab-line+0(4) EQ 'K034'.
t_po_items-acctasscat = 'R'.
t_po_items-plant = '1001'.
t_po_account-po_item = l_item.
t_po_account-profit_ctr = 'BR034'.
t_po_account-gl_account = '0000135075'.
T_PO_ACCOUNT-CO_AREA = '1000'.
APPEND t_po_account.
CLEAR t_po_account.
t_po_accountx-po_item = l_item.
t_po_accountx-profit_ctr = 'X'.
t_po_accountx-gl_account = 'X'.
T_PO_ACCOUNTX-CO_AREA = 'X'.
APPEND t_po_accountx.
CLEAR t_po_accountx.
ENDIF.
APPEND t_po_items.
CLEAR t_po_items.
t_po_itemsx-po_item = l_item.
t_po_itemsx-po_itemx = 'X'.
t_po_itemsx-acctasscat = 'X'.
t_po_itemsx-material = 'X'.
t_po_itemsx-ematerial = 'X'.
t_po_itemsx-plant = 'X'.
t_po_itemsx-quantity = 'X'.
t_po_itemsx-net_price = 'X'.
t_po_itemsx-price_unit = 'X'.
*T_PO_ITEMSX-TAX_CODE = 'X'.
APPEND t_po_itemsx.
CLEAR t_po_itemsx.
Second Line Item
ENDFORM. " APPEND_ITEM
*& Form REFRESH_TABLE
text
--> p1 text
<-- p2 text
FORM refresh_table .
REFRESH : t_po_items, t_po_itemsx.
CLEAR l_item.
ENDFORM. " REFRESH_TABLE
*& Form append_error
text
--> p1 text
<-- p2 text
FORM append_error .
MOVE : sy-datum TO zerror-zdate,
sy-uzeit TO zerror-ztime,
itab+3(5) TO zerror-document_no,
t_return-message TO zerror-message.
lcounter = lcounter + 1.
zerror-counter = lcounter .
zerror-rec_type = itab-line(1).
MODIFY zerror. CLEAR zerror.
COMMIT WORK.
ENDFORM. " append_error
Reward points if useful,
Aleem. -
How to supress a warning message in BDC for ME11 Tcode
Hi Expert,
I am doing a BDC report for ME11 Tcode and some of warning is ignorable for this transaction code,how can we suppress these warning through BDC program, is it possible or will have to make some changes changes in TCODE(ME11) itself.hi,
if the warning message coming in a pop-up window then it can be supressed in the following way.
1. comment the lines of the code of bdc recording of that pop-up screen along with the perform of bdc ok code '=ENTE".
2. use the structure ctu_params and fill the correspondings fiels, particularly the field nobinpt = 'X' and then use this structure in the call transcation statement as
call transcation 'ME11'
using bdcdata
options from opt ( structure of ctu_params )
3. At the time of recording use the option of check box " no batch input session ".
regards,
Alok -
To Record J1IS BDC For Multiple Line Items
Hi,
Iam trying to record BDC for J1IS transaction.
while recording material document which contains more than 8 line items , Only 8 line items get saved and the rest of the items doesn't get saved ,
But when I do this manually then all the line items get saved,
Can anyone give the remedy for this Problem (to record J1IS for multiple line items).
Thanks in Advance.
Regards,
S.Janani.Hi Janani / Leo
The problem might be that the scroll down functionality after 8 line items is not recorded in your recording.
In order to overcome the issue, you need to check OK__CODE whicle page down and add it in recording after Number of line items are greater than 8.
Please check below link for details:
http://scn.sap.com/thread/1106677
http://scn.sap.com/thread/797827
http://scn.sap.com/thread/2037271
Best Regards,
Sachin -
BDC for multiple line items (VA01)
Hi Experts,
I create a BDC for VA01 transaction for single line item in that now i want to upload multiple line items also with o/p of total no. of records uploaded, no. of records posted and the no. of error records...
Can any body explain with sample code...Hi,
if the flat file is containing header and item records...
first split those records tooo two internal tables header and item..
Loop at header ...
process of recording steps for header....
Loop at item...
here create a varialbe with char 2 .. for index value....
process of item recording steps..
increment the index value by 1....
here u have to pass 'p+' OK_CODE..
Endloop ..(item)
Endloop...(header)
for more info goo through this link...
http://www.sap-img.com/bdc.htm
hope helpful
Raghunath.S -
hi all,
i am developing bdc program to upload multiple line items for ml10.
i am uploading folling fields
spec_no
astyp
txz01,
sort1,
waers,
matkl,
ekorg,
srvpos ' service number
menge. 'quantity
service number and quantity are multiple line items.
i have developed a code which is taking single record only, it is not working for multiple service no and quantity.
include bdcrecx1.
parameters: filename like rlgrap-filename.
data: begin of record,
SPEC_NO(10),
ASTYP(4),
TXZ01(40),
SORT1(20),
WAERS(5),
MATKL(9),
EKORG(4),
NEW_ROW(10),
SRVPOS(18),
MENGE(13),
end of record.
data: itab_program like record occurs 0 with header line.
At Selection Screen
at selection-screen on value-request for filename.
perform query_filename changing filename.
*START-OF-SELECTION
start-of-selection.
*-- Upload flat data to ITAB.
perform upload_to_itab.
*{ chg001 -- modified as per requirement
perform open_group.
loop at itab_program.
perform upload_programs.
endloop.
perform close_group.
FORM UPLOAD_TO_ITAB *
form upload_to_itab.
call function 'WS_UPLOAD'
exporting
CODEPAGE = ' '
filename = filename
filetype = 'DAT'
HEADLEN = ' '
LINE_EXIT = ' '
TRUNCLEN = ' '
USER_FORM = ' '
USER_PROG = ' '
DAT_D_FORMAT = ' '
IMPORTING
FILELENGTH =
tables
data_tab = itab_program
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
write : 'File opening error.'.
endif.
endform.
FORM QUERY_FILENAME *
--> P_FILENAME *
form query_filename changing p_filename.
data : tmp_filename like filename.
call function 'WS_FILENAME_GET'
exporting
def_filename = filename
mask = ',.txt,.txt.'
mode = 'O'
title = 'Select the file to Upload'
importing
filename = tmp_filename
exceptions
inv_winsys = 01
no_batch = 02
selection_cancel = 03
selection_error = 04.
if sy-subrc = 0.
filename = tmp_filename.
endif.
endform.
*perform open_group.
*& Form UPLOAD_programs
text
--> p1 text
<-- p2 text
form upload_programs.
perform bdc_dynpro using 'SAPLMLSM' '0100'.
perform bdc_field using 'BDC_CURSOR'
'TEMP_SPEC-ASTYP'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'TMP_SPEC-SPEC_NO'
ITAB_PROGRAM-SPEC_NO.
perform bdc_field using 'TMP_SPEC-ASTYP'
ITAB_PROGRAM-ASTYP.
*****************************************************************SCREEN1
perform bdc_dynpro using 'SAPLMLSM' '0200'.
perform bdc_field using 'BDC_CURSOR'
'TMP_SPEC-EKORG'.
perform bdc_field using 'BDC_OKCODE'
'=SRV'.
perform bdc_field using 'TMP_SPEC-TXZ01'
ITAB_PROGRAM-TXZ01.
perform bdc_field using 'TMP_SPEC-SORT1'
ITAB_PROGRAM-SORT1.
perform bdc_field using 'TMP_SPEC-WAERS'
ITAB_PROGRAM-WAERS.
perform bdc_field using 'TMP_SPEC-MATKL'
ITAB_PROGRAM-MATKL.
perform bdc_field using 'TMP_SPEC-EKORG'
ITAB_PROGRAM-EKORG.
*****************************************************************END OF SCREEN2
perform bdc_dynpro using 'SAPLMLSP' '0201'.
perform bdc_field using 'BDC_OKCODE'
'=BZE'.
*perform bdc_field using 'RM11P-HEADTEXT'
ITAB_PROGRAM-TXZ01.
perform bdc_field using 'BDC_SUBSCR'
'SAPLMLSP'.
perform bdc_dynpro using 'SAPLMLSP' '0201'.
perform bdc_field using 'BDC_OKCODE'
'=BZE'.
perform bdc_field using 'BDC_CURSOR'
'ESLL-MENGE(01)'.
perform bdc_field using 'ESLL-SRVPOS(01)'
ITAB_PROGRAM-SRVPOS.
perform bdc_field using 'ESLL-MENGE(01)'
ITAB_PROGRAM-MENGE.
perform bdc_dynpro using 'SAPLMLSP' '0201'.
perform bdc_field using 'BDC_OKCODE'
'=SAV'.
perform bdc_field using 'BDC_SUBSCR'
'SAPLMLSP'.
perform bdc_transaction using 'ML10'.
endform. " UPLOAD_programs
can any body help me in this regard.
thanks in advance
sivaLoop at itab_program.
< Here will be your BDC Program>
call transaction..... .
endloop.
and all the records in you internal table itab_program will get updated...
Regards.
Jayant
<b>Please award if helpful</b> -
"BDC for multiple line items of PO"
I am using this code to move data for multiple line items of a PO. But only one is getting transferred. I am using BDC for this.
FORM transaction_bdc .
DATA :
v_cnt(2) TYPE n,
v_bst(2) TYPE n,
v_bn TYPE i,
v_bstpo(25),
v_ebtyp(25),
v_menge(25),
v_eeind(25),
v_xblnr(25),
v_xblnr1(25),
v_ebelp(2) TYPE n,
v_ebelpt(2),
v_menge1(11),
v_ebt TYPE i,
v_vebtyp LIKE ekes-ebtyp,
v_eb(2) TYPE n,
v_tcselflag(40),
v_tem(2) TYPE n,
v_correct TYPE i,
v_file TYPE string.
DATA: ls_outtab TYPE tb_struc.
DATA: l_valid TYPE c,
l_locked TYPE c.
CALL METHOD g_grid->check_changed_data
IMPORTING
e_valid = l_valid.
IF l_valid EQ 'X'.
LOOP AT tb_output WHERE check EQ 'X' .
MOVE-CORRESPONDING tb_output TO itab_output.
APPEND itab_output.
CLEAR itab_output.
ENDLOOP.
IF tb_output-check <> 'X'.
MESSAGE e003 WITH text-004.
ENDIF.
ENDIF.
IF itab_output[] IS NOT INITIAL.
PERFORM open_group.
***looping at purchase order level.
LOOP AT itab_output where ebelp is not initial .
CLEAR v_bn.
CLEAR v_ebt.
PERFORM bdc_dynpro USING 'SAPMM06E' '0105'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RM06E-BSTNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RM06E-BSTNR'
itab_output-ebeln.
***Changing alphanumeric fields and quantity fields to character type**
*v_ebelp = tB_OUTPUT-ebelp.
*clear v_ebelpt.
*v_menge1 = tB_OUTPUT-menge.
*v_ebelpt = v_ebelp.
***End Of Changing**
*Checking for the exact number of the item**
LOOP AT tb_output where ebeln = itab_output-ebeln.
READ TABLE itab_output INDEX 1.
IF tb_output-ebelp = itab_output-ebelp.
exit.
ELSE.
v_bn = v_bn + 1.
ENDIF.
ENDLOOP.
v_bst = v_bn + 1.
*End Of Checking**
**Mapping items**
v_tem = 1.
CONCATENATE 'RM06E-BSTPO(' v_bst ')' INTO v_bstpo.
CONCATENATE 'RM06E-TCSELFLAG(' v_tem ')' INTO v_tcselflag.
PERFORM bdc_dynpro USING 'SAPMM06E' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
v_bstpo.
PERFORM bdc_field USING 'BDC_OKCODE'
'=DETA'.
PERFORM bdc_field USING 'RM06E-EBELP'
v_ebelpt.
PERFORM bdc_dynpro USING 'SAPMM06E' '0111'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EKPO-BSTAE'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMM06E' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
v_bstpo.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BSTA'.
PERFORM bdc_field USING 'RM06E-EBELP'
v_ebelpt.
PERFORM bdc_field USING v_tcselflag
'X'.
**Checking weather Confirmation category already exists**
SELECT ebtyp FROM ekes INTO v_vebtyp WHERE ebelp =
itab_output-ebelp AND ebeln = itab_output-ebeln.
ENDSELECT.
IF sy-dbcnt > 0.
v_ebt = sy-dbcnt.
ENDIF.
v_eb = v_ebt + 1.
**End Of Checking**
**For Line items**
CONCATENATE 'EKES-EBTYP(' v_eb ')' INTO v_ebtyp.
CONCATENATE 'EKES-MENGE(' v_eb ')' INTO v_menge.
CONCATENATE 'RM06E-EEIND(' v_eb ')' INTO v_eeind.
CONCATENATE 'EKES-XBLNR(' v_eb ')' INTO v_xblnr.
**End**
PERFORM bdc_dynpro USING 'SAPLEINB' '0200'.
PERFORM bdc_field USING 'BDC_CURSOR'
v_xblnr.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
PERFORM bdc_field USING v_ebtyp
itab_output-ebtyp.
PERFORM bdc_field USING v_eeind
itab_output-eindt.
PERFORM bdc_field USING v_menge
v_menge1.
PERFORM bdc_field USING v_xblnr
itab_output-xblnr.
**End Of Mappings**
*loop at itab_output.
MOVE-CORRESPONDING itab_output TO ekes.
modify ekes.
MOVE-CORRESPONDING itab_output TO eket.
MODIFY eket.
MOVE-CORRESPONDING tb_output TO ekpo.
MODIFY ekpo.
ENDLOOP.
CALL TRANSACTION 'ME22N'
USING itbdc
MODE 'E'.
commit work.
perform bdc_transaction using 'ME22N'.
**End Of Purchase Order Loop**
PERFORM close_group.
endloop.
endif.Hi Asha,
check the below code once...
LOOP AT tb_output where ebeln = itab_output-ebeln.
READ TABLE itab_output INDEX 1.
IF tb_output-ebelp = itab_output-ebelp.
exit.
ELSE.
v_bn = v_bn + 1.
ENDIF.
ENDLOOP.
Here you are reading the table itab_output with index 1, it means you alway reading the first record of that internal table.
Regards,
Satya. -
BDC for CM25 tcode or a function module to dispatch planned orders
Please suggest a way for BDC of CM25 tcode as the selection of planned/process order in the tcode is not captured in recording.
or provide FM/BAPI for dispatch of planned orders.
Moderator message - Cross post locked
Edited by: Rob Burbank on Oct 23, 2009 11:27 AMreposting it
-
Dear All,
I am trying to write a bdc for tcode VBO2 (Agreement). in this i have ti give agreement number and then on second screen i have to select the PAY push button for clearing the amount.
In this i am not able to catch the pay table control as to on which index i have to pass my records.
Regards
AmitDear,
I know this but teh problem is i have 2 tables in my bdc one is xkonp where i get the value i.e. mpwrt whereever i get this value means i have to update the same value in bzwrt field. but in xkonp i have all the data. but in PAy tab when we go table control fills up from knopd table where as i also have xvake table in my program where the index is not updated. so means in xkonp wherever i get mpwrt take knumh of that row and check in xvake table you will get the exact row of table control where that value needs to be updated in bdc. in xvake i am not getting the indexes. any help on this.
Regards
Amit -
Pls help me to create SO using BDC for multiple line items (VA01)
Hi all,
My requirement is to create SO for multiple line items in ECC6.0
My recording for VA01 is like this.
start-of-selection.
perform open_group.
perform bdc_dynpro using 'SAPMV45A' '0101'.
perform bdc_field using 'BDC_CURSOR'
'VBAK-AUART'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'VBAK-AUART'
'ZOR'.
perform bdc_field using 'VBAK-VKORG'
'2000'.
perform bdc_field using 'VBAK-VTWEG'
'10'.
perform bdc_field using 'VBAK-SPART'
'05'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-WERKS(01)'.
perform bdc_field using 'RV45A-MABNR(01)'
'hrpocf'.
perform bdc_field using 'VBAP-POSNR(01)'
' 10'.
perform bdc_field using 'RV45A-KWMENG(01)'
' 55'.
perform bdc_field using 'VBAP-WERKS(01)'
'2010'.
perform bdc_dynpro using 'SAPLCEI0' '0109'.
perform bdc_field using 'BDC_CURSOR'
'RCTMS-MWERT(06)'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_field using 'RCTMS-MNAME(01)'
'A_THICK_MM'.
perform bdc_field using 'RCTMS-MNAME(02)'
'A_WIDTH_MM'.
perform bdc_field using 'RCTMS-MNAME(03)'
'A_EQUIVALENT_SPEC'.
perform bdc_field using 'RCTMS-MNAME(04)'
'A_BATCH_WEIGHT_MAX_SI'.
perform bdc_field using 'RCTMS-MNAME(05)'
'A_BATCH_WEIGHT_MIN_SI'.
perform bdc_field using 'RCTMS-MNAME(06)'
'A_COIL_INNER_DIA_MM'.
perform bdc_field using 'RCTMS-MWERT(01)'
'3.2'.
perform bdc_field using 'RCTMS-MWERT(02)'
'1200'.
perform bdc_field using 'RCTMS-MWERT(03)'
'IS_11513_GR_D_1985'.
perform bdc_field using 'RCTMS-MWERT(04)'
'26.4'.
perform bdc_field using 'RCTMS-MWERT(05)'
'26.4'.
perform bdc_field using 'RCTMS-MWERT(06)'
'610'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-WERKS(02)'.
perform bdc_field using 'RV45A-MABNR(02)'
'hrpocf'.
perform bdc_field using 'VBAP-POSNR(02)'
' 11'.
perform bdc_field using 'RV45A-KWMENG(02)'
' 66'.
perform bdc_field using 'VBAP-WERKS(02)'
'2010'.
perform bdc_dynpro using 'SAPLCEI0' '0109'.
perform bdc_field using 'BDC_CURSOR'
'RCTMS-MWERT(06)'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_field using 'RCTMS-MNAME(01)'
'A_THICK_MM'.
perform bdc_field using 'RCTMS-MNAME(02)'
'A_WIDTH_MM'.
perform bdc_field using 'RCTMS-MNAME(03)'
'A_EQUIVALENT_SPEC'.
perform bdc_field using 'RCTMS-MNAME(04)'
'A_BATCH_WEIGHT_MAX_SI'.
perform bdc_field using 'RCTMS-MNAME(05)'
'A_BATCH_WEIGHT_MIN_SI'.
perform bdc_field using 'RCTMS-MNAME(06)'
'A_COIL_INNER_DIA_MM'.
perform bdc_field using 'RCTMS-MWERT(01)'
'3.1'.
perform bdc_field using 'RCTMS-MWERT(02)'
'1250'.
perform bdc_field using 'RCTMS-MWERT(03)'
'IS_11513_GR_D_1985'.
perform bdc_field using 'RCTMS-MWERT(04)'
'20.084'.
perform bdc_field using 'RCTMS-MWERT(05)'
'20.084'.
perform bdc_field using 'RCTMS-MWERT(06)'
'610'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=PDE3'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-POSNR(01)'.
perform bdc_field using 'RV45A-VBAP_SELKZ(01)'
'X'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\09'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-INCO2'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'VBKD-FKDAT'
'29.01.2008'.
perform bdc_field using 'VBAP-TAXM1'
'1'.
perform bdc_field using 'VBAP-TAXM2'
'1'.
perform bdc_field using 'VBAP-TAXM3'
'0'.
perform bdc_field using 'VBAP-TAXM4'
'0'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DELETE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_CREATE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DETAIL'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXVB'.
perform bdc_field using 'RSTXT-TXLINE(02)'
'FDGFDG'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXBA'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\10'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-POSEX_E'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'VBAP-POSEX'
'108128'.
perform bdc_field using 'VBKD-BSTKD_E'
'3011192'.
perform bdc_field using 'VBKD-POSEX_E'
'000005'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=PDE3'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-POSNR(02)'.
perform bdc_field using 'RV45A-VBAP_SELKZ(02)'
'X'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\09'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-INCO2'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'VBKD-FKDAT'
'29.01.2008'.
perform bdc_field using 'VBAP-TAXM1'
'1'.
perform bdc_field using 'VBAP-TAXM2'
'1'.
perform bdc_field using 'VBAP-TAXM3'
'0'.
perform bdc_field using 'VBAP-TAXM4'
'0'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DELETE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_CREATE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DETAIL'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXVB'.
perform bdc_field using 'RSTXT-TXLINE(02)'
'GFGFDG'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXBA'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\10'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-POSEX_E'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'VBAP-POSEX'
'108128'.
perform bdc_field using 'VBKD-BSTKD_E'
'3011192'.
perform bdc_field using 'VBKD-POSEX_E'
'000005'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-POSEX'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'VBAP-POSEX'
'108128'.
perform bdc_field using 'VBKD-BSTKD_E'
'3011192'.
perform bdc_field using 'VBKD-POSEX_E'
'5'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=KKAU'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-MABNR(01)'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\02'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-KONDA'.
perform bdc_field using 'VBAK-AUDAT'
'29.01.2008'.
perform bdc_field using 'VBAK-VKBUR'
'IN15'.
perform bdc_field using 'VBAK-WAERK'
'INR'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-KDGRP'
'CF'.
perform bdc_field using 'VBKD-PLTYP'
'01'.
perform bdc_field using 'VBKD-KONDA'
'01'.
perform bdc_field using 'VBKD-BZIRK'
'NORTH'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\03'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-VSART'.
perform bdc_field using 'VBAK-VSBED'
'01'.
perform bdc_field using 'VBKD-KZAZU'
'X'.
perform bdc_field using 'VBKD-VSART'
'ER'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\05'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-INCO2'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'VBKD-FKDAT'
'29.01.2008'.
perform bdc_field using 'VBAK-TAXK1'
'1'.
perform bdc_field using 'VBAK-TAXK3'
'l'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\09'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-ZLSCH'.
perform bdc_field using 'VBKD-KTGRD'
'01'.
perform bdc_field using 'VBKD-ZLSCH'
'c'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DELETE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=TP_CREATE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DETAIL'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXVB'.
perform bdc_field using 'RSTXT-TXLINE(02)'
'BDFBFDB'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXBA'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\11'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=KSTC'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'J_STMAINT-ANWS(02)'.
perform bdc_field using 'J_STMAINT-ANWS(01)'
perform bdc_field using 'J_STMAINT-ANWS(02)'
'X'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'J_STMAINT-ANWS(03)'.
perform bdc_field using 'J_STMAINT-ANWS(02)'
perform bdc_field using 'J_STMAINT-ANWS(03)'
'X'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'J_STMAINT-ANWS(04)'.
perform bdc_field using 'J_STMAINT-ANWS(03)'
perform bdc_field using 'J_STMAINT-ANWS(04)'
'X'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_field using 'BDC_CURSOR'
'JOSTD-OBJNR'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-TXT_VBELN'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=SICH'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-MABNR(01)'.
perform bdc_transaction using 'VA01'.
perform close_group.
if in excel file one row of records means i am succesfully creating SO.
But for multiple i am not getting idea to create SO.
My excel file details like this.In this excel file based on VBKD-BSTKD_E value i have to keep the records in line items.
VBAK-AUART :Order Type
VBAK-VKORG : Sales Org
VBAK-VTWEG : Distri Channel
VBAK-SPART : Division
VBAK-KUNNR : Sold-to-Party
VBPA-KUNNAR : Ship-to-Party
VBAK-BSTNK : PO No
VBAK-BSTDK : PO Date
VBAP-MATNR : Material No
A_THICK_MM
A_WIDTH_MM
A_EQUIVALENT_SPEC
A_COIL_INNER_DIA_MM
A_BATCH_WEIGHT_MIN_SI
A_BATCH_WEIGHT_MAX_SI
VBAP-KWMENG : Qty
VBAP-WERKS : Delivery Plant
VBKD-INCO2 : Incoterm2
VBKD-KONDA : Price Group
VBKD-VSART : Shipping Type
VBAK-TAXK1 : Cust Tax-1
VBAK-TAXK2 : Cust Tax-2
VBAK-TAXK3 : Cust Tax-3
VBAK-TAXK4 : Cust Tax-4
VBKD-ZLSCH : Payment Method
VBAP-TAXM1 : Mat tax clss-1
VBAP-TAXM2 : Mat tax clss-2
VBAP-TAXM3 : Mat tax clss-3
VBAP-TAXM4 : Mat tax clss-4
VBAP-POSEX : IMPS Order No
VBKD-BSTKD_E : old SO in 4.6c
VBKD-POSEX_E : old SO Item in 4.6c
Text Id : TDC No
Text Id-ES10 : Special Inst(Unld const & Veh)
ZOR,2000,10,5,100000,100000,PO NO 125,19.01.2008,HRPOCF,3.1,1200,IS_11513_GR_D_1985,610,20.084,20.084
51,2010,Mumbai,01Freight-pre paid,ER,2,0,L,0,c,1,1,0,0,108128,3011192, 1,PO 444 AMD 1,Spl Inst
based on VBKD-BSTKD_E line items has to create.
if VBKD-BSTKD_E = 3011192 is like 4 records in excel means for these 4 should be one SO
if it is changed to 3011193 then only different SO.
PLs If any one knows solution pls write some sample code for me.
If u send that code to my mail id also very thankful.
Pls help me this is urgent requirement.
[email protected]
Thanks & Regards,
J.LokeshIf u want to add Items data, u have to handle the Table control by writing the complete code.
U have to write code for 2 items, when u press enter u will get new row to enter new record one by one.
Narendra -
Problem in BDC for IA05 tcode.
Hi,
I am facing a problem while uploading data for IA05 t.code using BDC call transaction method.
when I an running thru BDC, in the operational overview, when i select an operational line item, and go for inspection characteristics overview and provide inspection characteristics, sampling procedure, version and press enter, an window is popping up which is asking for inspection method, plant for inspection method and inspection method version number.
but when I am running the tcode normally, this inspection window is not popping up and details are not being asked. these inspection method details are not neccessary for my business logic. how can I by-pass this popup window which i don't want even when I run thru BDC.
Thanks and Regards,
Krishna.Hi Krishna
This is not the right forum to post this question. Post this to proper forum in order to get quick response.
Regards
Vaishali -
Hi experts,
I have a problem here. The requirment is like, we have a test data file in which in a particular record if there exists a deletion flag 'L' I need to delete this record from system by calling tcode VB12m, unless i need to create a record by calling tcode VB11.
The problem here is for already created records which are being displayed in VB12.First I need to check whether this entry exists in VB11 or not and then select the checked and then click to delete button in TCode VB12.
But how, shud i check the records from VB11 tcode whether it exists or not?These are coming in display mode in Tcode.......
Plz if anyone has faced this problem earlier suggest me how to proceed further.
Thanks in advance.Hi,
Please use the following format for your upload file template
DocDate1 ComCd1 Currency1 pstky1
DocDate1 ComCd1 Currency1 pstky2
DocDate1 ComCd1 Currency1 pstky3
DocDate2 ComCd2 Currency2 pstky1
DocDate2 ComCd2 Currency2 pstky2
Then use the following logic.
At New Currency1
add the header data
DocDate1 ComCd1 Currency1
Thus this code will run only once for every new Header
and remain in the screen till posting key are entered.
Regards,
Lokesh
Edited by: Lokesh Tibbani on Sep 5, 2008 12:17 PM -
Hi,
can any one send me a sample code for posting document through fb60 tcode
thanksHi Bobby,
try SHDB with FB60 and generate a Report.
Here a Example:
report ZTEST
no standard page heading line-size 255.
include bdcrecx1.
start-of-selection.
perform open_group.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE'
'=DUMMY'.
perform bdc_field using 'RF05A-BUSCS'
'R'.
perform bdc_field using 'BDC_CURSOR'
'INVFO-XMWST'.
perform bdc_field using 'INVFO-ACCNT'
'4711'. "LIFNR
perform bdc_field using 'INVFO-BUDAT'
'07.07.2006'.
perform bdc_field using 'INVFO-WRBTR'
'1000'.
perform bdc_field using 'INVFO-WAERS'
'EUR'.
perform bdc_field using 'INVFO-XMWST'
'X'.
perform bdc_field using 'INVFO-MWSKZ'
'V4'.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE'
'=BU'.
perform bdc_field using 'RF05A-BUSCS'
'R'.
perform bdc_field using 'BDC_CURSOR'
'INVFO-XBLNR'.
perform bdc_field using 'INVFO-ACCNT'
'4711'. "LIFNR
perform bdc_field using 'INVFO-XBLNR'
'test'.
perform bdc_field using 'INVFO-WRBTR'
'1.000,00'.
perform bdc_field using 'INVFO-XMWST'
'X'.
perform bdc_field using 'INVFO-MWSKZ'
'V4'.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'INVFO-BLDAT'
'07062006'.
perform bdc_field using 'INVFO-XBLNR'
'TEST'.
perform bdc_field using 'ACGL_ITEM-HKONT(01)'
'467000'.
perform bdc_field using 'ACGL_ITEM-WRBTR(01)'
' 1000'.
perform bdc_field using 'ACGL_ITEM-KOSTL(01)'
'1000'.
perform bdc_transaction using 'FB60'.
perform close_group.
Regards, Dieter -
Common exit for multiple Tcodes
Hello Experts,
Kindly suggest me a solution to my problem which is as below.
For every WBS element created for a project, there is some amount allocated.
When activities like Purchase requesition,
Purchase Order
Goods Issue
Some FI related activities all the above activities specified performed w.r.t WBS element. When the amount allocated w.r.t to those activities exceeds 50% as well as 80% to that of the amount allocated to the corresponding WBS element a mail must be triggered to the person reponsible for that perticulat WBS element.
Thanks & Regards,
Murthy.
Moderator message - Please do not post your requirements ans ask the forum to do your work for you. And please post in the correct forum - post moved and locked
Edited by: Rob Burbank on May 27, 2009 9:24 AMhi
yes u can do this
use condition
like
if tcode = ZC1
display input fields for this transaction
elseif = ZC2
display input fields for this transaction
elseif = ZC3
display input fields for this transaction
endif.
put this whole bock of code in at selection screen output
Reward points
Cheers
Snehi
Edited by: snehi chouhan on Jun 23, 2008 1:16 PM -
BDC for Me22 Tcode-Version Management
Hi ,
I want to add the version management in for exiting BDC in ME22 Transaction in ECC6.0
How can i go for that.
please help me .
regards,
Ajay
Edited by: Ajay reddy on Sep 16, 2009 3:26 PM
Edited by: Ajay reddy on Sep 16, 2009 3:38 PMHi,
Thanks for attempt the Question.
Me22-> Enter Order number-> Go to HEADER> VERSION.
Can I handle the Menu option in recording..... Please help me in this.
regards,
Ajay
Edited by: Ajay reddy on Sep 16, 2009 3:47 PM
Edited by: Ajay reddy on Sep 16, 2009 3:50 PM
Edited by: Ajay reddy on Sep 16, 2009 6:52 PM
Maybe you are looking for
-
since upgrading to FireFox 4 I am unable to access pdf online. It takes me to a New Tab which is blank. I have no problem viewing and downloading these files using IE.
-
Dead pixels on Macbook Pro Retina Display and keyboard scratches.
Since the purchase of my Macbook Pro with Retina Displey 15" early February 2013 it has gained 5 dead pixels on the screen. If I take it to the Apple Store are they going to tell me it's my own fault and not help? I also found a scratch on the <H> ke
-
Problem with announcing a MobileMe gallery
I got small problem for some time: Every time I hit the "announce" (don't know if it is called exactly like that, because i'm using the German Version) button, iPhoto and mail don't do anything at all. I tried to delete the preferences, once it seeme
-
We are trying to organize some sites that were built poorly. I am wondering if there is an easy way to locate all the images in a site and move them all into a new folder. I know that you can find all the images in the Assets window, but I can't drag
-
With the new IOS loading abilities introduced in 3.6 & 3.7, I find them pretty limited for a couple of reasons: The fact that the complier strips AS code from the external swf files and embeds it in the main swf file means that anytime my assets chan