BDoc BUPA_REL error in the initial flow.

Hi,
We are using ECC 6.0 and CRM 5.0 due to some reasons we performed CUSTOMER_MAIN and CUSTOMER_REL initial loads.
we are facing many BUPA_REL Bdoc errors with msg: Department has not maintained.
Customers with Contact person will have a department in CRM system (Relationship).
When we check the BPs Contact person, the department is maintained.
1. Why this error comes even though the department is maintained?
how t solve this error? Please suggest.
Regards,
Fedor.

Hi,
Also check if the department which you are entering in Customer contact person in ECC also exist in CRM config (SPRO) under contact person-->Define department.
Regards,
Chandrakant

Similar Messages

BP im multiple sales org :BDoc BUPA_REL   error

IN CRM we have a sold-to BP maintained in two sales org 1000 and 2000 and its
                                 ship-to maintained only in 2000 sales org                                 in CRM system ( CRM 5.0 )
Those are replicated to ECC
(   I used FM BUPA_MWXT_CREATE_MAIN_BDOC to replicate BP to ECC ...
it worked fine ... sold-to created in 1000 and 2000 and ship-to are crated in 2000 sales org in ECC . )
Now I'm trying to replicate the BP relationship to ECC using FM 'BUPA_MWXT_CREATE_REL_BDOC'.
At this point BDOC BUPA_REL is giving error as
: Customer XXXXXX (SHIP-TO) has not been created for sales area 1000.
I know ship-to is not maintained in 1000 sales org ...but I want the relationship to be maintained for 2000 sales org .
How can I acheive this?
By using 'BUPA_MWXT_CREATE_REL_BDOC' I want to maintain relationship only for 2000 sales org.??
Let me know if you ar not clear wiht the question
Edited by: aday rao on Sep 16, 2009 11:13 PM
Edited by: aday rao on Sep 16, 2009 11:18 PM
Edited by: aday rao on Sep 17, 2009 9:40 PM
Edited by: aday rao on Nov 2, 2009 10:09 PM

In my case I was trying to create a sales rep manually and when I did that
no 'Personeel number' (BP- Employee Role -Identification Tab) was getting assigned to it, hence the error.
Check for the value in this field for the BP which is throwing the error.
Table - BUS000EMPL
Field - EMPLOYEE_ID
Reward point , if info helps.
Regards
Pallav

How to bypass errors in the control flow in a foreach loop in SSIS?

Hi All,
Can anyone please get me through the solution for the below scenario:
- I have multiple XML files existing in the source system from where I need to read the data from each XML, validate and pull to staging database.
- So, to read the XML files from source, I have a foreach loop which will get the XML files from the source folder one by one and executes.
- There are multiple data flow tasks, script tasks, SQL tasks etc in the foreach loop to validate the business requirements.
Question: If there is an error in any of the component in foreach loop, it should log the error, come out of the loop from that point and pick up the next file with out stopping the execution. How can I achieve this?
Thanks,
Sri

Hi Sri,
According to your description, when there is an error in any of the component in Foreach Loop Container, you want to continue processing rest of the loop after recording the error file details.
To achieve your requirement, the first thing you need to do is create an OnError event handler for the Data Flow (or any other child executable). Once the event handler is created show the system variables in the variables window, locate the Propagate variable
and set it to false.
For more details, please refer to the following two blogs:
http://www.codeproject.com/Articles/384690/In-SSIS-how-to-continue-a-for-each-loop-container
http://visakhm.blogspot.in/2013/03/error-handling-in-ssis-loops.html
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

SSM - Error in the initial logon

Hi.
I am new to SSM, but have been working on IP and BCS for sometime. We have SAP Strategy Management 7.0 SP7 (JAVA deployment on NW CE Server) installed and configured.
I tried to logon to SSM but got the following error.
undefined: 'SQLArray1.1' is null or not an object
undefined: http://sdsap02:50200/strategy/pilotworks/topapplet.jsp
undefined: #150
I even have admin role assigned to my userid in the UME.
Initial screen after logon comes blank with SAP Logo and as Undefined and then this error.
Request for help in this regard.
Thanks
Sreekanth

Thanks Bob for your reply.
I face similar issue when I try to login to strategy / admin.
http://<nwce_server>:<port>/strategy/administration
Due to this I am unable to build model.
SSM Config guide provides HFPBM Sample model. The command provided in the guide doesn't seem to work - JOB HFPBMMAK.PRO;ext. Could you please confirm if this is the appropriate one to build the sample model.
Thanks
Sreekanth

Bdoc Validation Error "No categories assigned to the product".

Hi Experts,
I have two issues:-
1. I am using "Equipment" Adapter(R3AC1) to Extract one Equipment from R/3 to CRM server. And when I execute the initial Load(R3AS), it got start successfully but when I checks in SMW02, Bdoc type "R3AI_EQUIPMENT" is showing the error . the Message is "No categories assigned to the product" Msg No. is "COM_PRCAT032". How to fix this issue.
2. I want to know from which table the Category Id of Equipment is coming from R/3and in which table it is going to store in CRM database table. also using one BAdi (CRM_EQUI_LOAD_STDIMP) for Category determination.
Pl. help
Thanks in Advance
Ankit

Please post in CRM forums. You will find better answers.
Regards,
Prateek

Error in using External Process in the Process Flow

I Created a Process Flow with an external process to Move the file from one location to another location,
I gave the below parameters for the External Process
COMMAND: move
PARAMETER_LIST: ?F:\\FlatFiles\\in\\company.txt?F:\\FlatFiles\\error\\company.err
SUCCESS_THRESHOLD: 0
SCRIPT:
The environment is
Windows 2003
OWB 9.2.0.8
OWF Builder 2.6
When I deploy and execute using Deployment Manager, it gave me the below error
Starting Execution TEST
Starting Task TEST
Starting Task TEST:EXTERNALPROCESS
CreateProcess: move move F:\FlatFiles\in\company.txt F:\FlatFiles\error\company.err error=2
Completing Task TEST:EXTERNALPROCESS
Completing Task TEST
Completing Execution TEST
What am I missing something here?
Is my Parameters correct?
GIve me the link where I can find more on using External process.
Please...please...help me..
Shree

Nikolai,
I have created a simple process flow which only calls the external process. The script is on the same host as the process flow is deployed to.
I have used two diffent values for the command parameter.
1. I placed the full path of the file in the command parameter and left the script parameter blank:
COMMAND: /edwftp/ppas/scripts/ClearPPAS.sh
PARAMETER_LIST:
SUCCESS_THRESHOLD: 0
SCRIPT:
2.I placed the bash command in the command parameter and the full path in the script parameter.
COMMAND: /usr/bin/sh
PARAMETER_LIST:
SUCCESS_THRESHOLD: 0
SCRIPT: /edwftp/ppas/scripts/ClearPPAS.sh
Both of these appear to work as they print out the statements inside the script but the files that are supposed to be removed still remain.
Starting Execution EXTER_FILE
Starting Task EXTER_FILE
Starting Task EXTER_FILE:EXTERNALPROCESS
Removing ActivatedAudit.dat...
Removing ActivatedCustomers.dat...
Removing ActiveAudit.dat...
Removing ActiveCustomers.dat...
Done!
Create the Activated Customers data file...
Create the Active Customers data file...
Done!
WARNING: Log file truncated - see RAB for further information.
/edwftp/ppas/scripts/ActivatedCustomers.sh: /edwftp/ppas/log/ActivatedCustomers.log: cannot create
/edwftp/ppas/scripts/ActiveCustomers.sh: /edwftp/ppas/log/ActiveCustomers.log: cannot create
WARNING: Log file truncated - see RAB for further information.
Completing Task EXTER_FILE:EXTERNALPROCESS
Completing Task EXTER_FILE
Completing Execution EXTER_FILE
The permissions on the /log direcotry are 775. The user I register the file location with owns this directory.
Can't think of anything else I have missed. I really appreciate your help :)
Ryan

Error when calling a popup window in the initial screen of an application

Hi,
    I am calling a popup window in the Initial screen to select the variant list.
I am getting an error reference to Null Object reference.
Here is the Error.
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED_NO
Exception              CX_SY_REF_IS_INITIAL
Date and Time          15.06.2007 10:00:16
Short text
Access via 'NULL' object reference not possible.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_WDR_MESSAGE_AREA===========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "SUPPLY_VIEW_DATA" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component.
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"OBJECTS_OBJREF_NOT_ASSIGNED_NO" "CX_SY_REF_IS_INITIAL"
"CL_WDR_MESSAGE_AREA===========CP" or "CL_WDR_MESSAGE_AREA===========CM00Q"
"SUPPLY_VIEW_DATA"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"SUPPLY_VIEW_DATA" "(METHOD)", or its possible occurrence must be declared in
the
RAISING clause of the procedure.
To prevent the exception, note the following:
Looking for Ur valuable suggestions.
Cheers,
Sam

Hi Sam,
The correct code for creating a popup window will be:
data lo_window_manager type ref to if_wd_window_manager.
data lo_api_component type ref to if_wd_component.
data lo_window         type ref to if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
lo_window         = lo_window_manager->create_window(
                     window_name            = 'WINDOW_NAME'
*                    title                  =
*                    close_in_any_case      = abap_true
                     message_display_mode   = if_wd_window=>co_msg_display_mode_selected
*                    close_button           = abap_true
                     button_kind            = if_wd_window=>co_buttons_okcancel
                     message_type           = if_wd_window=>co_msg_type_none
                     default_button         = if_wd_window=>co_button_ok
lo_window->open( ).
Hope this helps.
Regards,
Ram

TF215097: An error occurred while initializing a build for build definition : Could not establish trust relationship for the SSL/TLS secure channel

Hello,
We are facing an issue when triggering a new build using TFS 2013 Update 4, VS2013 Update 4 using TFVCTemplate.12.XAML template. All our other older build definitions just work fine but not the TFVCTemplate.12.XAML. It seems to me that some certificate
might be invalidated. Can anyone please point me in the right direction?
Thanks,
Mitul
TF215097: An error occurred while initializing a build for build definition :
Exception Message: One or more errors occurred. (type AggregateException)
Exception Stack Trace: at System.Threading.Tasks.Task`1.GetResultCore(Boolean waitCompletionNotification)
at Microsoft.TeamFoundation.Build.Client.FileContainerHelper.GetFile(TfsTeamProjectCollection projectCollection, String itemPath, Stream outputStream)
at Microsoft.TeamFoundation.Build.Client.FileContainerHelper.GetFileAsString(TfsTeamProjectCollection projectCollection, String itemPath)
at Microsoft.TeamFoundation.Build.Client.ProcessTemplate.Download(String sourceGetVersion)
at Microsoft.TeamFoundation.Build.Hosting.BuildControllerWorkflowManager.PrepareRequestForBuild(WorkflowManagerActivity activity, IBuildDetail build, WorkflowRequest request, IDictionary`2 dataContext)
at Microsoft.TeamFoundation.Build.Hosting.BuildWorkflowManager.TryStartWorkflow(WorkflowRequest request, WorkflowManagerActivity activity, BuildWorkflowInstance& workflowInstance, Exception& error, Boolean& syncLockTaken)
Inner Exception Details:
Exception Message: An error occurred while sending the request. (type HttpRequestException)
Exception Stack Trace: at Microsoft.VisualStudio.Services.WebApi.VssHttpRetryMessageHandler.<SendAsync>d__1.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.ConfiguredTaskAwaitable`1.ConfiguredTaskAwaiter.GetResult()
at Microsoft.VisualStudio.Services.WebApi.HttpClientExtensions.<DownloadFileFromTfsAsync>d__2.MoveNext()
Inner Exception Details:
Exception Message: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. (type WebException)Exception Stack Trace: at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
Inner Exception Details:
Exception Message: The remote certificate is invalid according to the validation procedure. (type AuthenticationException)
Exception Stack Trace: at System.Net.TlsStream.EndWrite(IAsyncResult asyncResult)
at System.Net.ConnectStream.WriteHeadersCallback(IAsyncResult ar)

Hi Mitul,
Thanks for your reply.
It’s strange, if your old build definitions can work using the same TFS Build Server, that indicate your TFS Server configuration is correct and can works. But only new build definition with default TfvcTemplate.12.xaml template cannot build successful.
Please share your TFS Server detailed environment information here. And share your
Build Service Properties dialog screenshot here.
Try to clean the Cache for TFS 2013 manually(delete the content of the folder only, not the cache folder itself):
Clean the Cache folder on Server machine. The folder path is:
C:\Program Files\Microsoft Team Foundation Server 12.0\Application Tier\Web Services\_tfs_data.
After cleaned, on Server machine, click Start and select
Run… to open the dialog box, then input iisreset.exe and click OK, wait it run completely.
Additionally, you can run the TFS 2013 Power Tools BPA to scan the installation of your TFS Server.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Processing BDocs Errors in the background

Hi,
I was wondering whether the following is possible.
We currently have BDocs errors in SMW01 on a regular basis. This is because our users are opening the BP record in CRM and R/3. There the BDoc error will have a message saying that the business partner is currently being processed by XXXX. We can reprocess these BDocs and they are processed successfully. What we would like to do is process these BUPA_MAIN BDoc errors in the background so we don't need to go into them manually. I understand the program for transaction SMW01 is RSMW_SHOW_BDOC. Has anyone ever taken a copy of this program and modified it so that it can process the above BDoc errors automatically in the background? We are looking into this as our business process allows the user to launch a record in both CRM and R/3. (Don't ask)
Anyway if anyone has done anything similar - any tips would be much appreciated.
Thanks in advance.
Regards
JoJo

Hi Jojo,
I have not done anything similar but can point you in right direction.
You can refer to class cl_smw_mflow which handles the middleware for messaging bdoc's. You can write a bespoek program from scratch with some selection parameters and process the messaging bdocs by looking at the status of bdoc's. There is a function module 'SMW3_MFLOW_QPROCESSMBDOC' which allows to process the bdoc's by passing the header information.
You can read the status of bdoc's & other header infromation from table SMW3_BDOC.
Hope this helps.
Surendar

I want to reinstall our Adobe Acrobat XI Pro because we have begun to get error messages. I followed the initial instructions but when I logged in I couldn't find "My Orders" page which is required to locate my order and install. Any ideas?

I want to reinstall our Adobe Acrobat XI Pro because we have begun to get error messages. I followed the initial instructions but when I logged in I couldn't find "My Orders" page which is required to locate my order and install. Any ideas?

Barbara,
If you are looking for your serial number, sign in to your Adobe account. On the Manage Accounts page that appears, all of your registered products and their serial numbers are listed in the Plans & Products section. For more information on locating serial numbers,please see Find a serial number
Here is the link to download and install the software:
Acrobat XI, X
Pattie

Document flow says "Acct determin error". The invoice not posted in FI

Hello SAP gurus,
Having an issue with my sales order (IJ1 single instance client 100 system)
The document flow is saying "Acct determin error" and in the header status - billing document Invoice posting says "Not posted in FI".
checked MM03 settings and everything looked okay. Can you please help? Thankyou

Hi Lionel,
Business Area is not supporting now-a-days. Hence somewhere the business area is activated and hence ask your FI consultant to remove the assignment.
Regards,
Elanchezhian. K.C.

Error: 0xC020902A at Data Flow Task, XML Source [24515]: The "component "XML Source" (24515)" failed because truncation occurred, and the truncation row disposition on "output column "MsgLev1" (26196)" specifies failure on truncation. A truncation error o

When I was Importing data from XML to SqlServer using SSIS , I am getting this error. The import is working if i use small file and not working if I use large XMl file. Can any one of you guys help me out with the issue?
Error: 0xC020902A at Data Flow Task, XML Source [24515]: The "component "XML Source" (24515)" failed because truncation occurred, and the truncation row disposition on "output column "MsgLev1" (26196)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
Error: 0xC02092AF at Data Flow Task, XML Source [24515]: The component "XML Source" (24515) was unable to process the XML data. Pipeline component has returned HRESULT error code 0xC020902A from a method call.
Error: 0xC0047038 at Data Flow Task: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "XML Source" (24515) returned error code 0xC02092AF. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread3" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread4" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread2" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread2" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread3" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread4" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.

The reason is in the first line of the error. It doesn't have anything to do with the size of your XML file - it has to do with the contents of the "MsgLev1" column. You (or the XSD) has indicated that the values in this column not exceed a certain size - but one of the values in the file that's failing is larger than that.
In order to fix the problem, you're going to need to increase the allocated space for that column. In order to do that, you're going to need to find out what the required size of that data is - either from someone who ought to know, or by direct examination of the file. If you want to know which entity has this overly large data element in it, you need to configure the error handling of the XML Source to "redirect truncation errors". Then you can hook up the XML Source's error output to another destination where you can see which rows are problematic.
Talk to me on

Deployment error during deployment of the process flow...

i have made a program using OMB to deploy an OWB process flow. i have used tcl programming to run it on UNIX.
when i run the program it gives me a strange error saying:
an unknown error has occured during deployment .
when i open the OWB design center to check the status i find the the process folw is stuck during the generation part and it continues but the generation never takes place.. for that i wrote an OMBALTER to alter the generation language of the mappings used in the process flow ,but it does not help...
also after the error in the program when i see the mapping through the desibn center i do not see the original mapping when i open the mapping editor.
then if I run the again program again i get the process flow deployed successfully ,obviously with the incorrect mappings.
can anybody plz help me out with it???

Hello!
I searched metalink on error RTC-5161 and found a reference in note 392263.1
It is a bug but there is a patch available ( bug 5504848, patch number 5525337).
Read the note on metalink to check if you really hit this bug and apply the patch.
Regards,
Robert

Error when trying to overwrite the initialized varibale

Hii,
I am trying to overwrite the initial value of the variable that is decalred. I am getting the error that i pasted it below.
1 declare
2 result varchar(30):='Hello world';
3 begin
4 result:= 'ram'
5 dbms_output.put_line(result);
6* end;
SQL> /
dbms_output.put_line(result);
ERROR at line 5:
ORA-06550: line 5, column 1:
PLS-00103: Encountered the symbol "DBMS_OUTPUT" when expecting one of the
following:
* & = - + ; < / > at in is mod remainder not rem
<an exponent (**)> <> or != or ~= >= <= <> and or like LIKE2_
LIKE4_ LIKEC_ between || multiset member SUBMULTISET_
The symbol "*" was substituted for "DBMS_OUTPUT" to continue.
please help.
thanks
sharath

Hi sharath
I did a very small mistake.You did not see the error proper
it is common mistake that is
declare
result varchar(30):='Hello world';
begin
result:= 'ram' ; ---------------you did not mension semicolon (;) at end.
dbms_output.put_line(result);
end;
one thing you see this type of mistake will asking the users this are all simple mistake fist find program one are two times and you decome perforect in the program ok nice to metting you bye.

Excluding the initiator in SAP work flow

Hi,
I have a standard sap work flow WS20000263
which has rule 20000053.
How do i exclude the initiator in this case .
Thanks,
Pradeep.

Its a challenging task for all
I don't like challenges, I like to be happy, i don't won't to make my life tensed

BDoc BUPA_REL error in the initial flow.

Similar Messages

Maybe you are looking for