Processing BDocs Errors in the background

Hi,
I was wondering whether the following is possible.
We currently have BDocs errors in SMW01 on a regular basis.  This is because our users are opening the BP record in CRM and R/3.  There the BDoc error will have a message saying that the business partner is currently being processed by XXXX.  We can reprocess these BDocs and they are processed successfully.  What we would like to do is process these BUPA_MAIN BDoc errors in the background so we don't need to go into them manually.  I understand the program for transaction SMW01 is RSMW_SHOW_BDOC.  Has anyone ever taken a copy of this program and modified it so that it can process the above BDoc errors automatically in the background?  We are looking into this as our business process allows the user to launch a record in both CRM and R/3.  (Don't ask)
Anyway if anyone has done anything similar - any tips would be much appreciated. 
Thanks in advance.
Regards
JoJo

Hi Jojo,
I have not done anything similar but can point you in right direction.
You can refer to class cl_smw_mflow which handles the middleware for messaging bdoc's.  You can write a bespoek program from scratch with some selection parameters and process the messaging bdocs by looking at the status of bdoc's. There is a function module 'SMW3_MFLOW_QPROCESSMBDOC' which allows to process the bdoc's by passing the header information.
You can read the status of bdoc's & other header infromation from table SMW3_BDOC.
Hope this helps.
Surendar

Similar Messages

  • After closing large documents (drawings) the window closes but the process runs still in the background. I open the next document, the same procedure and after dowing this several times the RAM is full the system becoms very slow. what can i do???

    after closing large documents (drawings) the window closes but the process runs still in the background. I open the next document, the same procedure and after dowing this several times the RAM is full the system becoms very slow. what can i do???

    You can always shut it down manually via the Task Manager
    (CtrlShiftEsc)...
    On Mon, Sep 1, 2014 at 3:05 PM, frank koethen <[email protected]>

  • Icloud cpanel for outlook starts, but nothing appears on the monitor. The process is running in the background.

    The process is running in the background. However nothing appears on the screen for you to alter your settings.
    I have windows 7 64-bit and outlook 2010.
    It was working, but just stopped after several months. I have un-installed and re-installed several times, to no avail.
    Please help.

    I have sorted it now, thank you.
    Re-installed older version of icloud, and then updated the software throught the apple software updater.
    This re-solved the issue.

  • MI31 Process (Physical Inventory) In the Background

    Hi Gurus,
    My question is how to find in an easy way the inventory document number created when I process the batch input in the background with MI31.
    Thanks
    Joules

    Hi Jürgen L. 
    Can you please detail a little more your answer, I still can't know the PI document number. It´s not hard for me because I know the secuente or the number ranges, but for a user that has never used SAP is hard to find the document number after processing the batch imput.
    Thanks in advance

  • Playing a prompt while another process is running in the background

    I'm running ICM 6 with IP IVR Queue Manager 3.5.
    I've built a couple of scripts that take input from callers and then uses the input to query a database.  Sometimes it takes a few seconds to return with a response so I want to play music or a prompt while it retrieves the data.
    Is this possible with Queue Manager?
    thanks

    I haven't used anything earlier than 4.0 so I'm unsure of any idiosyncrasies between that and 4.0 but I assume this would still be possible so what I'd do is just place the call on hold before you do the DB dip and then after it's done take the call off hold and do whatever treatment you need to.
    Cheers,
    Nathan

  • WM settings of processing the posting change in the background?

    Hello,
    When WM is active and usage decision is made then posting change is generated in 922 area in WM. We need to process this posting change.
    My question is, how can I make the process automated as follows.
    u201CWhen usage decision is made in quality then, then WM stock will turn in to unrestricted and posting change generation and process should happen in the background.u201D
    What are the related settings of processing the posting change in the background?
    Thanks

    Dear Milind,
    Please have a look at OSS notes nos. 965094 and 566090. As a rule, direct transfer order creation is possible if the posting triggered by the usage decision (to unrestricted use stock, for example) refers to the entire inspection lot quantity.
    Best regards,
    Christiane

  • How to stop version check that happens in the background after timeout?

    Hi all,
    I have a problem that seriously makes my swing application (installed using webstart) very slow for some time.
    Steps to reproduce my problem :
    1. Deploy the jars of application in the web server running on Machine A( either in LAN or running on public IP).
    2. Download the application on Machine B using the link.
    3. Shutdown Machine A.
    4. Now try to start the application on Machine B. The starting of the application has become very slow.
    After some time(long enough) the application is started. Even now, the application is slow for first few minutes.
    Below is the part of jnlp that we used.:
    +<?xml version="1.0" encoding="utf-8"?>+
    +<jnlp spec="1.0" codebase="$$codebase" href="LaunchMyApplication.jnlp">+
    +<information>+
    +<title>My Application</title>+
    +<vendor>XYZ</vendor>+
    +<description kind="short">XXXXXXXX</description>+
    +<icon href="../../../../images/myapp_splash2009.gif" kind="splash"/>+
    +<icon href="../../../../images/myapp_logo.jpg"/>+
    +<offline-allowed/>+
    +</information>+
    +<security>+
    +<all-permissions/>+
    +</security>+
    +<resources>+
    +<property name="abc.type" value="client"/>+
    +<j2se version="1.5" initial-heap-size="48m" max-heap-size="256m"/>+
    +     +
    +     <!-- jar details -->+
    +     ...........+
    +     ..........+
    +     +
    +</resources>     +
    +<application-desc main-class="com.abc.xyz.Login">+
    +     <argument>..........</argument>+
    +</application-desc>+
    +</jnlp>+
    My assumsion is
    When I start my application, version checking will happen. But the cache server system(machine A) is not available. Due to this initial slowdown has occurred.
    After the timeout has occured, my application has started. Since the version checking continuous in the background, my application is again slow.(Even when my application server and database system are in the same LAN of my client machine).
    This slowdown is certainly not desirable.
    This slowness isn't there when there Machine A( in which my webserver is installed) is running and my webserver (Tomcat 5.0 in my case) is not started.
    Is my assumsion is correct?
    If correct, how do I stop version checking process that happens in the background after initial timeout?
    I think update check and policy attribute may not help me as I wanted to stop this background version check altogether. Also, my java sersion is 1.5_0_14.
    Please help me out in this.
    Thanks in advance..,
    Chakri.

    Talk to Apple here...
    http://www.apple.com/feedback/

  • Running in the background

    Is it possible to make a java program that runs as a background process, maybe with a nice little system tray icon for kicks?
    I've heard that this is impossible, but I wanted to double check.

    Thanks, but the system tray part of that question was more of a quip than an actual question. What I was really wondering was how to make a process that runs in the background, without a window or anything (except a nifty system tray icon that I can make now).

  • Bdocs error data SMW01 (PRODUCT_MATERIAL)

    After running some replication we have a lot of bdocs error with the following logs :
    "Data for set BBPM_PR_GENERAL may only be changed in the original system SIDCLNT050 (our crm logical system)"
    "Validation error occurred: Module COM_PRODUCT_MAT_VALIDATE, BDoc type PRODUCT_MAT."
    we have found the corresponding note 786409 but eveni if our system is update, the bug is not fixed (we had the same function module wgich triggers problem)
    I checked some tables with a not the right logical system (logsys) but we tried to change it from one product id and it does not work.
    Any help will be rewarded.
    Thomas

    Hi,
       Which CRM release are you using?
    You may try re-generating the Bdoc (PRODUCT_MAT) services using trx.
    SMOGGEN
    . Then try reprocessing one or the error Bdocs or run the delta load once again.
    If no success, you may have to debug the CRM inbound queue and the validation service module
    com_product_mat_validate
    Good luck! Reward if helpful.
    - Sudipta.

  • Error in the HsvJournalsACM object

    Hi guys,
    I'm having issues with Journals... Could you please help me?
    A certain journal looks like it is posted, though its value is 0 at Entity Currency Adjs in the report. Whe I tried to access journal via hyperlink, it yields this error:
    "The journal no longer exists in the system. The journal you're trying to load has been deleted and cannot be processed. Error in the HsvJournalsACM object".
    But when I see the journal list, it is actually posted.
    could this be a problem with Hyperlink? should I configure it in a certain way?
    Please, advise.
    Thank you!
    Regards,
    Jai

    Hi Jai,
    Please, check in Oracle Support the error "Financial Management Error 'The journal no longer exists in the system' When Opening Journal Details [ID 1087635.1]". It'll be necessary to install a patch.
    Cheers,
    Lu

  • Planning job: Processed with errors

    Hi,
    A planning job was run. In MC8I (Check Mass Processing), i see the following:
    Job:
    Variant:
    Info Structure:
    Version:
    Planning type:
    Created:
    Status: Processed with errors
    Although the status is Processed with errors, but the values transferred to PIR (MD63) seems alright. Can anyone shine light what is the problem?
    Thanks.

    Hi,
    Activities checked:      
       UEBERGABE    SOPDM_M  
    ---> whereby UEBERGABE is the Activity in MC8T; SOPDM_M is the Transfer profile in MC8S
    I had created another Info Structure, Planning Activity, Transfer Profile, Planning Type with the exact same configuration as per the earlier one. However, this error never happened. It was processed successfully. Therefore, I don't know where the problem is since the configurations seems exactly the same. One is processed successfully , the other is processed with errors.
    Thanks.

  • Mass BDOC Error Message

    We are currently executing the initial load for MATERIAL and getting numerous BDOC error messages.  Is there any way to tie the BDOC errors with the data.  Currently we are getting multiple messages and then getting a list of 100 materials that could possibly be causing the error, is there a way to identify the material to the message?

    Hi  John,
    I think its not very easy but can be done. You have a Prod_MAT error bdoc list already. Do an analysis by following below steps on one error BDOC first.
    1. Take the BDOC id, go to table - SMW3_BDOC4. Enter BDOC id and check number of entries.
    2. You will get more than one entry, check which one gives you error message and material number. Note that Error segment no.
    Note that if a BDOC has got more than two three errors (more than one always as we know), it will be difficult for you to filter them out. In this case, I advise, you enter in BDOC GUids of a bunch of bdocs, download to excel and filter them based on Message type/Message id. Then again pick up one BDOC from specific message type/id and check in which field you get error and material number and in which Error segment number. Based on this, you scan through remaining bdocs and message ids.
    It worked for me well but had to spent a lot of time  as you will have different errors, number of errors and so on.
    Best of luck.
    REgards,
    Santosh

  • Changing the background colour for the pop up box in UWL

    Hello Expert,
    I got the confirmation popup box In my UWL application for the confirmation process. By default the background for this popup box is Blue.
    I want change it to new colour.
    FYI, I have an Iview from web dynpro Application for this popup. How can I change this?
    Kindly advice.
    Regards,
    Hafizah.

    Hi,
    I guess you have to override the stylesheet that is set by the Portal for the Web Dynpro application.
    Have a look at the properties of your WD iView.
    http://help.sap.com/saphelp_NW70EHP1core/helpdata/en/f4/651741f163f023e10000000a155106/content.htm
    Best regards,
    Guillaume

  • The background thread running lazy writer encountered an I/O error

    Hi I have a test server which has thrown the following error
    File system error: A system error occurred while attempting to read or write to a file store. The system might be under memory pressure or low on disk space. Physical file: \\?\F:\MSAS11.DEPLOYAS\OLAP\Data\Prod_KCube.0.db\DIM Flags And Types.0.dim\3.Flag
    Types Key.khstore. Logical file: . GetLastError code: 8. File system error: The background thread running lazy writer encountered an I/O error. Physical file: \\?\F:\MSAS11.DEPLOYAS\OLAP\Data\Prod_KCube.0.db\DIM Flags And Types.0.dim\3.Flag Types Key.khstore.
    Logical file: . Errors in the OLAP storage engine: An error occurred while processing the 'Facts' partition of the 'Main Facts' measure group for the 'Prod_Cube' cube from the Prod_KCube database.
    The cube sits on a not very well maintained server which is used by various users (it is a test server) with the following specs
    Intel(R) Xenon(R) CPU x5690 @3.47GHz
    24GB Ram
    64 Bit operating system.
    The Cube data and logs are on separate drives and have plenty data but the C drive (where SQL Server is installed) only has3.5Gb of space left.
    It's a fairly big cube and I've managed to get it running by processing dimensions and facts bit by bit but errors when processed all together.
    What could be causing the errors above?

    Hi aivoryuk,
    According to your description, you get the lazy writing error when processing partitions. Right?
    In this scenario, the issue may cause by low memory for SSAS and lack of disk space. Please consider configure
    Server Properties (Memory Page) and increase
    memory setting for SSAS. If the .cub file is located in C drive, please reserve more disk space.
    Please refer to a similar thread below:
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/21bf84c5-f89a-464a-a5f1-2649fae5eb1e/while-processing-large-cubes-various-file-system-errors-the-background-thread-running-lazy-writer?forum=sqlanalysisservices
    Best Regards,
    Simon Hou
    TechNet Community Support

  • Error occurs in background work process.

    Respected Guru's,
    error occurs in two background work process, i have displayed the trace files of both the bgd work process.
    How to rectify this error ?
    Further, can you please help me in identifying the problem, please suggest me good material which gives steps for troubleshooting such error in the developer's and system trace.
    Thank you.
    Dayanandan.a
    Developer trace file for BGD WP 1
    trc file: "dev_w12", trc level: 1, release: "620"                                             
    ACTIVE TRACE LEVEL           1                                                             
    ACTIVE TRACE COMPONENTS      all, M                                                        
    M  systemid   560 (PC with Windows NT)                                                        
    M  relno      6200                                                                            
    M  patchlevel 0                                                                               
    M  patchno    251                                                                             
    M  intno      20020600                                                                        
    M  pid        2864                                                                            
    M                                                                               
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc12 2864) [dpxxdisp.c   1016]                      
    M  <EsNT> Memory Reset enabled as NT default                                                  
    M  calling db_connect ...                                                                     
    M  db_connect o.k.                                                                            
    M  rdisp/reinitialize_code_page -> 0                                                       
    M                                                                               
    M Tue Jul 30 10:22:53 2002                                                                    
    M  SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020730.AUD    
    M                                                                               
    M Tue Jul 30 10:22:55 2002                                                                    
    M  *** ERROR => SlicLockSema: sema locked [slicshm.c    89]                                   
    M  *** ERROR => SlicShmInit: SlicLockSema failed [slicshm.c    231]                           
    M  *** ERROR => SlicValBufInit: cannot initialize SHM [slicshm.c    299]                      
    M  *** ERROR => SlicValBufRead: license buffer not initialized [slicshm.c    329]             
    M  *** ERROR => SlicCheckBuf: some error reading license buffer contents [slicshm.c    419]   
    M                                                                               
    M Wed Jul 31 00:00:49 2002                                                                    
    M  SecAudit(check_daily_file): audit file closed E:\usr\sap\SER\DVEBMGS00\log\20020730.AUD    
    M  SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020731.AUD    
    M Thu Aug 01 00:00:49 2002                                                                               
    M  SecAudit(check_daily_file): audit file closed E:\usr\sap\SER\DVEBMGS00\log\20020731.AUD                       
    M  SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020801.AUD                       
    M                                                                               
    M Fri Aug 02 00:00:49 2002                                                                               
    M  SecAudit(check_daily_file): audit file closed E:\usr\sap\SER\DVEBMGS00\log\20020801.AUD                       
    M  SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020802.AUD                       
    M                                                                               
    M Fri Aug 02 00:14:09 2002                                                                               
    M  *** ERROR => ThCallHooks: event handler rsts_before_commit for event BEFORE_COMMIT failed [thxxtool3.c  235]  
    M  ***LOG R38=> ThICommit3, db_commit98 ( 001024) [thxxhead.c   10641]                                           
    M  ***LOG R18=> ThPrivCommit, ThICommit () [thxxhead.c   11307]                                                  
    M  in_ThErrHandle: 1                                                                               
    M  *** ERROR => ThPrivCommit: ThICommit (step 4, th_errno 9, action 2, level 1) [thxxhead.c   8277]              
    M                                                                               
    M  Info for wp 12                                                                               
    M                                                                               
    M    stat = 4                                                                               
    M    reqtype = 4                                                                               
    M    act_reqtype = 4                                                                               
    M    tid = 12                                                                               
    M    mode = 0                                                                               
    M    len = 24                                                                               
    M    rq_id = 6638                                                                               
    M    rq_source = 1                                                                               
    M    last_tid = 12                                                                               
    M    last_mode = 0                                                                               
    M    rfc_req = 0                                                                               
    M    report = >                                        <                                                         
    M    action = 16                                                                               
    M    tab_name = >                              <                                                                 
    M   
    M                                      
    M  Modeinfo for User T12/M0            
    M                                      
    M    tm state = 2                      
    M    uid = 13                          
    M    term type = 0x0                   
    M    display = 0x0                     
    M    cpic_no = 0                       
    M    cpic_idx = -1                     
    M    usr = >SAPUSER     <              
    M    terminal = >                    < 
    M    client = >800<                    
    M    conversation_ID = >        <      
    M    appc_tm_conv_idx = -1             
    M    imode = 3                         
    M    mode state = 0x42                 
    M    th_errno = 9                      
    M    async_receives = 0                
    M    cpic_receive = 0                  
    M    em handle = 2                     
    M    roll state = 4                    
    M    abap state = 4                    
    M    em state = 3                      
    M    eg state = 1                      
    M    lock = 0                                                                               
    Developer's trace file for BGD WP 2
    trc file: "dev_w13", trc level: 1, release: "620"                                             
    ACTIVE TRACE LEVEL           1                                                             
    ACTIVE TRACE COMPONENTS      all, M                                                        
    M  systemid   560 (PC with Windows NT)                                                        
    M  relno      6200                                                                            
    M  patchlevel 0                                                                               
    M  patchno    251                                                                             
    M  intno      20020600                                                                        
    M  pid        2872                                                                            
    M                                                                               
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc13 2872) [dpxxdisp.c   1016]                      
    M  <EsNT> Memory Reset enabled as NT default                                                  
    M                                                                               
    M Tue Jul 30 10:21:44 2002                                                                    
    M  calling db_connect ...                                                                     
    M  db_connect o.k.                                                                            
    M                                                                               
    M Tue Jul 30 10:22:25 2002                                                                    
    M  rdisp/reinitialize_code_page -> 0                                                       
    M                                                                               
    M Tue Jul 30 10:22:53 2002                                                                    
    M  SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020730.AUD    
    M                                                                               
    M Wed Jul 31 00:00:52 2002                                                                    
    M  SecAudit(check_daily_file): audit file closed E:\usr\sap\SER\DVEBMGS00\log\20020730.AUD    
    M  SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020731.AUD    
    M                                                                               
    M Thu Aug 01 00:00:49 2002                                                                    
    M  SecAudit(check_daily_file): audit file closed E:\usr\sap\SER\DVEBMGS00\log\20020731.AUD    
    M  SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020801.AUD                      
    M                                                                               
    M Fri Aug 02 00:00:51 2002                                                                               
    M  SecAudit(check_daily_file): audit file closed E:\usr\sap\SER\DVEBMGS00\log\20020801.AUD                      
    M  SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020802.AUD                      
    M                                                                               
    M Fri Aug 02 00:14:09 2002                                                                               
    M  *** ERROR => ThCallHooks: event handler rsts_before_commit for event BEFORE_COMMIT failed [thxxtool3.c  235] 
    M  ***LOG R38=> ThICommit3, db_commit98 ( 001024) [thxxhead.c   10641]                                          
    M  ***LOG R18=> ThPrivCommit, ThICommit () [thxxhead.c   11307]                                                 
    M  in_ThErrHandle: 1                                                                               
    M  *** ERROR => ThPrivCommit: ThICommit (step 4, th_errno 9, action 2, level 1) [thxxhead.c   8277]             
    M                                                                               
    M  Info for wp 13                                                                               
    M                                                                               
    M    stat = 4                                                                               
    M    reqtype = 4                                                                               
    M    act_reqtype = 4                                                                               
    M    tid = 13                                                                               
    M    mode = 0                                                                               
    M    len = 24                                                                               
    M    rq_id = 6643                                                                               
    M    rq_source = 1                                                                               
    M    last_tid = 13                                                                               
    M    last_mode = 0                                                                               
    M    rfc_req = 0                                                                               
    M    report = >                                        <                                                        
    M    action = 16                                                                               
    M    tab_name = >                              <                                                                
    M                                                                               
    M  Modeinfo for User T13/M0                                                                               
    M                                                                               
    M    tm state = 2                      
    M    uid = 14                          
    M    term type = 0x0                   
    M    display = 0x0                     
    M    cpic_no = 0                       
    M    cpic_idx = -1                     
    M    usr = >SAPUSER     <              
    M    terminal = >                    < 
    M    client = >800<                    
    M    conversation_ID = >        <      
    M    appc_tm_conv_idx = -1             
    M    imode = 3                         
    M    mode state = 0x42                 
    M    th_errno = 9                      
    M    async_receives = 0                
    M    cpic_receive = 0                  
    M    em handle = 3                     
    M    roll state = 4                    
    M    abap state = 4                    
    M    em state = 3                      
    M    eg state = 1                      
    M    spa state = 3                     
    M    enq state = 0                     
    M    next hook = T-1/U-1/M255          
    M    master hook = T-1/U-1/M255        
    M    slave hook = T-1/U-1/M255         
    M    debug_tid = -1                    
    M    mode type = 0x1                   
    M    debug = 0                         
    M    lock = 0                          
    M                                      
    M                                      
    M Sat Aug 03 00:00:55 2002
    M  SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020803.AUD
    M                                                                               
    M Sun Aug 04 00:00:49 2002                                                                
    M  SecAudit(check_daily_file): audit file closed E:\usr\sap\SER\DVEBMGS00\log\20020803.AUD
    M  SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020804.AUD
    M                                                                               
    M Mon Aug 05 00:00:49 2002                                                                
    M  SecAudit(check_daily_file): audit file closed E:\usr\sap\SER\DVEBMGS00\log\20020804.AUD
    M  SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020805.AUD
    M                                                                               
    M Tue Aug 06 00:00:49 2002                                                                
    M  SecAudit(check_daily_file): audit file closed E:\usr\sap\SER\DVEBMGS00\log\20020805.AUD
    M  SecAudit(check_daily_file): audit file opened E:\usr\sap\SER\DVEBMGS00\log\20020806.AUD

    Thank you, Bhaskar,
    I have performed consistency check for temse objects and all the comments are displayed in red color.
    Does it mean that objects are inconsistent. But, no comments states that object are inconsistent.
    I have attached the comments displayed,
    Consistency check of table TST01 / TemSe objects
    This comment occurs repeatedly, Unable to access the related file           Length = 0
    Incorrect number of data lines in TST03              
    Object with part number 1 missing
    Object reset                     Length = 0
    The related file has an incorrect length
    Consistency check of table TST03 / TemSe data
    No object found in TST01
    May i delete all objects, as all the comments are red in color.
    Dayanandan.A

Maybe you are looking for

  • Safari error 302 while opening web page after 2.0.1

    Safari cannot open the page "Operation could not be completed. (kCFErrorDomainCFNetwork error 302.)" Mmmmm????/////... anyone

  • Oracle Job in progress for too long (3 days)

    Hi guys, i am using oracle 10.2.0.3 database. One of the oracle job is in progress for almost 3 days & in active state. i tried enabling trace but didnt get anything. please let me know what should i do. EM also dont show any current or previous SQL

  • Rotate movie doesn't work!

    I'm trying to rotate a .mov filmsequence in my recently installed and upgraded(PRO) Quicktime 7.5. When I open the film and go to <window <movie properties, it doesn't look anything like the window featured on the apple website and gives me no option

  • Deleted broadcast ready.cst by mistake- any away to get it back

    Hi By mistake , I deleted the "broadcast ready" channel setting (mastering) that came with the software. Is there any way to get it back? thanks Pat

  • Creating Report with three parameter

    Hi Team, Please tell me how to create report having more than one PARAMETER in BI Publisher... I am able to create DATA MODEL but when I am creating Report from the Data Source on dragging the table.... *THE TABLES HAVE NULL RECORDS...Please tell me