Bdoc error : Plant IT01 is not assigned to any location

Hi Experts,
I have downloaded the Plants from r/3 to CRM [7.0] using object DNL_PLANT through /nr3as. I have checked the entries in /nCRM_LOCMAP, all plants are downloaded to CRM except IT01 & MS01.
While downloading MATERIAL from r/3 to CRM, i am getting the following bdoc errors
Plant IT01 is not assigned to any location
Plant MS01 is not assigned to any location
Since these do not exists in /nCRM_LOCMAP, i can see that i am getting this error. I have re downloaded DNL_PLANT & checked the status of completion as green. Still these two particular plants are missing.
Also, when i checked the material [for which i am getting the bdoc error] in r/3, i can see that plants have maintained for that material.
Is there anyway, to fix the issue?
Appreciate if someone can suggest a solution on this.
Thanks & Regards,

Hi Chandrakant,
There are no filters set for this object. Also, i took your suggestion, & created a BP with role plant & maintained the details in /nCRM_LOCMAP. Reprocessed the bdoc's, & i am done, worked finally.
Thanks a lot for your valueable solution. I have another issue in bdoc error which says " Check-digit in GTIN 00001216000000 (unit of measure KG) is invalid"
This is the only one i am getting in /nsmw01 & almost in all the bdocs erros. I did search online, but have not got any suitable solution on this.
Can you help me resolving this issue also?
Thanks & Regards,

Similar Messages

System not assigned to any business system group

In transaction /SAPAPO/MAT1 an error occurs when I try to create a new product.
Error message: " System SC1CLNT100 not assigned to any business system group".
When I received this error I created business system group in SLD and assigned my system to this new business system group.
Then I went to transaction RZ70 and executed Data Collector without Job scheduling.
But when start transaction /SAPAPO/MAT1 again the error /SAPAPO/MAT030 still occurs.
What should be done to make changes, which I made in SLD visible for the system?
Thank you in advance,
Kind regards,
Maria Kazakova

I assume you assigned this BSG in the IMG in APO
"As an independent logical system, the APO System must, in addition to the SAP R/3 Systems, be assigned to a business system group (BSG)."

In 3rd party sales error -consumption a/c not assigned to PO auto a/c assig

Dear Friends,
while creating va01 for 3rd party sales , error -consumption a/c not assigned to purchase order automatic account assignment.
i need to do obyc setting for gbb in need to select a/c modifier -what is that ?
SO is a cost object.
Reg
nagesh

Hi,
Please review the following notes for more information:
550388 FAQ: Customizing of third-party and individual Pos
210997 Accnt assignmt categoriesin third-party and indiv.P
On creating Purchase order for requirement created for a customer sales order stock, if the customer sales order stock is not valuated, this means a Consumption ( GBB ) account is involved here. If the posting is a consumption account, SAP allows the user to decide whether it should be autotmatically or manually entered. Because of this option, system need this account to be set with Field 'Automatic posting only' to ' '.
With this field 'Automatic posting only' setting to ' ', whether the account can be automatically or manually entered is then controlled by the field status in the PO creation. If you do not want the user to enter the account manually, then this account should be set to display mode in PO.
If the customer sales order stock is valuated, then in General business process, this would involve a BSX ( material account )
postings. Normally this is automatically derived during PO creations. No manual enterring is allowed. Thus if it is correct to set this account with field Automatic posting only' setting to 'X' in FI settings.
Please read the note 37563.
Please check if note 842977 is present in your system.
regards
Waman

Web template :Error Valid Data provider not assigned

Hello Friends we have the web template that was working before , we did the upgrade to SP13 from SP11.
It gives the error Valid Data provider not assigned and
Bad integer Parameter value of Parameter BLOCK_COLUMNS_SIZE of Object item:ANALYSIS_ITEM:ANALYSIS;
Please help where do i need to assign the Data provider beacuse the Values are same for Dataprovider as before
Portal Runtime Error
An exception occurred while processing your request
Exception id:
See the details for the exception ID in the log file.
Thanks
Soniya
Message was edited by:
soniya kapoor

Open the template in WAD and do a validation against the server and make sure the template is well formed.
Also make sure you apply BI JAVA Patch 1 for SPS 13.

Error TTB1: You have not assigned business partner B1000 to a customer

Hi,
When trying to post the costs of a forex transaction we receive this error message: You have not assigned business partner B1000 to a customer ; Message no. FLBP116. When posting these costs (on a P&L account) we go through a finance interface to derive a CO object (network activity) from PS. Strange thing is that we don't have this error in Dev or QAS but only in acceptance which is a copy of prod... The interface works fine for costs from guarantees and L/C which goes to an other network activity in PS.
Any recommandations on this? The BP functionality has never been used befor by my customer.
Thanks in advance, and this a week befor possible go live...
Hans.

Update in PS was needed...

Delete materials not assigned to any plant.

Dear Readers,
I am trying to find out a means by which I can identify and delete materials that are not assigned to any of the plants. During the data loads in Production, there were duplicate materials created and only one of the 5 duplicates is assigned to a plant. Is there a means of doing that with standard SAP programs or do we need to write a custom ABAP program for that.
There could be more than 10,000 materials like that.
Thank you for reading and answers are appreciated.

if you know already the numbers of those unwanted materials, then you can archive them with SARA object MM_MATNR.
(it is not mandatory to set a deletion flag first)
if you dont know the materials that do not have plant views, then do se16 for table MARA and check the field PSTAT
The characters in the field indicate which view exist.
call MM50 and press F4 in field maintenance status to get info about what character represents which view.

TBB1 Error as "You have not assigned partner to the customer"

Hi All,
when running TBB1 for a transaction we are getting the error as "You have not assigned "X" partner to the customer". Did anybody face the issue like this may share the inputs. Thanks.
Regards,
S.Sumana.

Hi Jasmine,
I have created two BPs (example BP 1 and BP 2) and I created two transactions (TM01) under each Business partner. The issue regarding "Assign customer role to BP" is coming only with respect to transactions created under BP 1 while running TBB1 for the particular transaction.
The TBB1 run for the transactions created with the BP 2 is absolutely fine.
I want to know what is the dfference between the two Business partners and what is it that driving the error "Assign Customer Role to Partner". I tried to find the differences between both the partners but apparently couldnot find any. Please help. Thanks.
Regards,
Sumana.

Bdoc error - Tax code 1 not valid

Hello everyone,
I am getting BDoc error "Tax code 1 not valid" . I downloaded the object "DNL_CUST_TAX" from R3 to CRM. After doing this, the BP's went through successfully from R3 to CRM.However while sending BP's from CRM to R3 , same error occured. Is there any other object which can be downloaded from CRM to R3. or any other way out??
- Arpita Shah.

Hi Arpitha,
Download the object DNL_CUST_TAX to CRM system then reprocess the errpr bdoc.
and let me know the status.
If the bdoc is in the red state after reprocessing,i think u need to create tax group in CRM img.
<b>Allot points if my post helps!!!!!!!!!!</b>
Regards,
Sathya Reddy.

Cost element not assigned to any line id

when i excute the transction kkax i am getting cost element is not assigned to any id
would you please explin the wip configuration steps.
i am not aware the masked cost element
with regards
Srinivas

You need to read the error to find out which cost element needs assignment.
You need to assign the source cost elements (through t-code OKGB), that are expected in the production order to various line ID already created. You maintain this data for CO area, RA version and RA key combination. You use masking when you mention which cost element to be assigned to various IDs. You can also direct various cost element, if it comes with a combination of particular cost center and activity type to a particular Line ID. If you need to keep it simple, just enter +++++++++ for cost centers, activity types and Business processes. Cost elements can be masked as follows; for eg. All cost primray cost elements for materials, if they start from 210001 to 219999, the you can mask them like 00021+++++. Give the line ID in the column Required to Capitailze.
Your line IDs typically would reflect the cost component structure.

There are values for cost element 80000 that are not assigned to any line I

Hi,
While calulating WIP I am getting below error:
There are values for cost element 80000 that are not assigned to any line ID
Message no. KJ161
Diagnosis
Not all values for the cost element are assigned to a line ID.
Procedure
Assign the cost element to a line ID. If you don't want to include the cost element in results analysis, assign it to a line ID of category N.
You can access a detailed list of unassigned cost elements as follows: Start results analysis in the individual processing mode (transaction KKA1, KKA2, or KKA3). Select the field Full log. Execute the function. On the next screen, choose Logs -> Parameter List in the menu. A list is generated. The unassigned values are shown at the end of the list.
If cost element "+++++++++" was shown in the message, this is because in the assignment of costs and revenues to line IDs, you have not used a cost element other than the full masking "+++++++++". In this case a presummarization eliminates the information on the cost element.
Cost Element 80000 is of type 43 Internal activity allocation, I have Masked this in OKGB as below:
Controlling Area = FLGP
RA Version = 0
Masked Cost Element = 000008++++
Masked Cost Center = ++++++++++
Masked Activity Type = +++++
ReqToCap= COS (Secondary Cost)
I have Configure OKGA also but still system is giving error.
Please help me to understand.
Regards,
Vivek

I was wondering if you could help me I am trying to configure the RA key for Refurb orders and when I go into txn OKGB for the Assignment of C/E for WIP there is sample config already there which I copied. But I am having difficulty getting the KK1A to work I am getting the message as outlined above. Could you explain how this OKGB works and how to configure it a bit more fully. In my sample config there is a ReqTOCap section and in it there are letters like ABR, EK, FK, EL what do they mean. This is a screen shot of it. I am not sure how to go about this entirely so any light you could shed would be greatly appreciated. Can you suggest a good resource or documentation you may have, would be greatly appreciated.

How can I find photos that are not assigned to any collection?

Hi !
I'm using LR 5.7.1 on a Mac.
When I've retouched raw pictures with PS CC (and do not need the PSD file any longer) I export the PSD (that is in my catalog) as JPG and let it add to my catalog automatically. After that I delete the PSD file. That works fine.
But .... the new JPG file is not assigned to any collection. That's no problem unless I forget to do it manually after that export (and import).
That brings me to my question.
How can I find photos that are not assigned to any collection?
I tried it with a smart collection after I found nothing suitable in library filter. The search criteria I tried are Source -> Collection with any of the conditions. One with an empty value field, then with just a space and so on.
Has anybody a good hint for me?
Thomas

You can also add numbers if you have collections that don't use alphabet characters.

Iphone 4S will not charge, error that USB device not working, found any suggestions?

iphone 4S will not charge, error that USB device not working, found any suggestions?

Hello Chambless,
The troubleshooting steps below can help get your iPhone to charge.
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue is persists, please contact Apple Support.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Cheers,
Allen

Info Record - Error Message "Company Code not assigned to Country"

Hi,
I am a beginner in SAP MM.
I am trying to Create an Info Record(ME11). After enter the material, Purchase Org., and Storage Location. While saving the data error message is being displayed as "Company Code not assigned to Country".
Please let me know the reason for this error.
Thanks,
Vinod.J

Hi Vinod,
The error might because of few SPRO setting are missing about the Company Code, (to which your Material/ plant/ P. Org. of your Info record are assigned/ maintained)
Check whether customizing given in below link is done,
http://www.sap-img.com/financial/company-code-not-assigned-to-country.htm
Regards,
Pravin

Regarding error "Field symbol is not assigned." during print preview

Hi experts,
    I am getting dump while trying print preview for particular POs in ME23n transaction(ECC 6.0). Please refer the below dump error:
Runtime Errors         GETWA_NOT_ASSIGNED_RANGE
Date and Time          29.09.2009 19:30:39
Short dump has not been completely stored (too big)
Short text
     Field symbol is not assigned.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLSTXC" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     A field symbol that was not assigned was accessed
     (data segment no. 32769).
    The field symbol is no longer assigned because there was an attempt
    makde previously in a Unicode program to set the field symbol using
    ASSIGN with offset and/or length specification. Here, the memory
    addressed by the offset/length specification was not within the
    allowed area.
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "GETWA_NOT_ASSIGNED_RANGE" " "
    "SAPLSTXC" or "LSTXCFFT"
    "FT_COMPOSE"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
   2. Corresponding system log
      Display the system log by calling transaction SM21.
      Restrict the time interval to 10 minutes before and five minutes
   after the short dump. Then choose "System->List->Save->Local File
   (Unconverted)".
   3. If the problem occurs in a problem of your own or a modified SAP
   program: The source code of the program
      In the editor, choose "Utilities->More
   Utilities->Upload/Download->Download".
   4. Details about the conditions under which the error occurred or which
   actions and input led to the error.
I am getting this dump only for few POs.. Rest of the POs are able to print. I am not able to find notes for this issue. Is there any SAP notes available for that or Is there any configuration issue related to this?
Please provide solution for thsi as soon as possible.
Thanks and Regards
Subbu

A field symbol is not assigned, but thats what the dump is telling you. Mostly this happens, when fields or function modules are stored by name, like the fieldnames in the fieldcatalog in an ALV report. It a field referenced in such a way does not exist you will get this error. Always store fieldnames and function names in capital letters and check mistyping of 1L 8B and so on.

Reverse Termination Error The employee is not assigned to a Payroll

Hello,
I am trying to reverse terminate an employee, but I am getting the following error while doing so.
Oracle Version : Release 12.1.1
"APP-PAY-06047: This employee is not assigned to a Payroll
Cause: You cannot create Nonrecurring, additional, adjustment or override element entries for employees who are not assigned to a Payroll."
Please if anyone can help in resolving this error, and what might be causing this error, as all other employees are successfully reverse terminated, except this one.
Thanks and Regards,
Deepti

Hi Gaurav,
Actually the patch will be applicable, if the scenario matches with the bug. But the scenario is not as mentioned in the mentalink note cause section.
Hence I cannot apply this patch for this issue, when the cause doesnt match. Like you, even I searched everywhere, but this issue is not logged or resolved anywhere.
Let me know, if you get any workaround or solution for this.
Thanks for your help.
Thanks and Regards,
Deepti

Bdoc error : Plant IT01 is not assigned to any location

Similar Messages

Maybe you are looking for