Delete materials not assigned to any plant.

Dear Readers,
I am trying to find out a means by which I can identify and delete materials that are not assigned to any of the plants. During the data loads in Production, there were duplicate materials created and only one of the 5 duplicates is assigned to a plant. Is there a means of doing that with standard SAP programs or do we need to write a custom ABAP program for that.
There could be more than 10,000 materials like that.
Thank you for reading and answers are appreciated.

if you know already the numbers of those unwanted materials, then you can archive them with SARA object MM_MATNR.
(it is not mandatory to set a deletion flag first)
if you dont know the materials that do not have plant views, then do se16 for table MARA and check the field PSTAT
The characters in the field indicate which view exist.
call MM50 and press F4 in field maintenance status to get info about what character represents which view.

Similar Messages

Bdoc error : Plant IT01 is not assigned to any location

Hi Experts,
I have downloaded the Plants from r/3 to CRM [7.0] using object DNL_PLANT through /nr3as. I have checked the entries in /nCRM_LOCMAP, all plants are downloaded to CRM except IT01 & MS01.
While downloading MATERIAL from r/3 to CRM, i am getting the following bdoc errors
Plant IT01 is not assigned to any location
Plant MS01 is not assigned to any location
Since these do not exists in /nCRM_LOCMAP, i can see that i am getting this error. I have re downloaded DNL_PLANT & checked the status of completion as green. Still these two particular plants are missing.
Also, when i checked the material [for which i am getting the bdoc error] in r/3, i can see that plants have maintained for that material.
Is there anyway, to fix the issue?
Appreciate if someone can suggest a solution on this.
Thanks & Regards,

Hi Chandrakant,
There are no filters set for this object. Also, i took your suggestion, & created a BP with role plant & maintained the details in /nCRM_LOCMAP. Reprocessed the bdoc's, & i am done, worked finally.
Thanks a lot for your valueable solution. I have another issue in bdoc error which says " Check-digit in GTIN 00001216000000 (unit of measure KG) is invalid"
This is the only one i am getting in /nsmw01 & almost in all the bdocs erros. I did search online, but have not got any suitable solution on this.
Can you help me resolving this issue also?
Thanks & Regards,

How can I find photos that are not assigned to any collection?

Hi !
I'm using LR 5.7.1 on a Mac.
When I've retouched raw pictures with PS CC (and do not need the PSD file any longer) I export the PSD (that is in my catalog) as JPG and let it add to my catalog automatically. After that I delete the PSD file. That works fine.
But .... the new JPG file is not assigned to any collection. That's no problem unless I forget to do it manually after that export (and import).
That brings me to my question.
How can I find photos that are not assigned to any collection?
I tried it with a smart collection after I found nothing suitable in library filter. The search criteria I tried are Source -> Collection with any of the conditions. One with an empty value field, then with just a space and so on.
Has anybody a good hint for me?
Thomas

You can also add numbers if you have collections that don't use alphabet characters.

Cost element not assigned to any line id

when i excute the transction kkax i am getting cost element is not assigned to any id
would you please explin the wip configuration steps.
i am not aware the masked cost element
with regards
Srinivas

You need to read the error to find out which cost element needs assignment.
You need to assign the source cost elements (through t-code OKGB), that are expected in the production order to various line ID already created. You maintain this data for CO area, RA version and RA key combination. You use masking when you mention which cost element to be assigned to various IDs. You can also direct various cost element, if it comes with a combination of particular cost center and activity type to a particular Line ID. If you need to keep it simple, just enter +++++++++ for cost centers, activity types and Business processes. Cost elements can be masked as follows; for eg. All cost primray cost elements for materials, if they start from 210001 to 219999, the you can mask them like 00021+++++. Give the line ID in the column Required to Capitailze.
Your line IDs typically would reflect the cost component structure.

System not assigned to any business system group

In transaction /SAPAPO/MAT1 an error occurs when I try to create a new product.
Error message: " System SC1CLNT100 not assigned to any business system group".
When I received this error I created business system group in SLD and assigned my system to this new business system group.
Then I went to transaction RZ70 and executed Data Collector without Job scheduling.
But when start transaction /SAPAPO/MAT1 again the error /SAPAPO/MAT030 still occurs.
What should be done to make changes, which I made in SLD visible for the system?
Thank you in advance,
Kind regards,
Maria Kazakova

I assume you assigned this BSG in the IMG in APO
"As an independent logical system, the APO System must, in addition to the SAP R/3 Systems, be assigned to a business system group (BSG)."

There are values for cost element 80000 that are not assigned to any line I

Hi,
While calulating WIP I am getting below error:
There are values for cost element 80000 that are not assigned to any line ID
Message no. KJ161
Diagnosis
Not all values for the cost element are assigned to a line ID.
Procedure
Assign the cost element to a line ID. If you don't want to include the cost element in results analysis, assign it to a line ID of category N.
You can access a detailed list of unassigned cost elements as follows: Start results analysis in the individual processing mode (transaction KKA1, KKA2, or KKA3). Select the field Full log. Execute the function. On the next screen, choose Logs -> Parameter List in the menu. A list is generated. The unassigned values are shown at the end of the list.
If cost element "+++++++++" was shown in the message, this is because in the assignment of costs and revenues to line IDs, you have not used a cost element other than the full masking "+++++++++". In this case a presummarization eliminates the information on the cost element.
Cost Element 80000 is of type 43 Internal activity allocation, I have Masked this in OKGB as below:
Controlling Area = FLGP
RA Version = 0
Masked Cost Element = 000008++++
Masked Cost Center = ++++++++++
Masked Activity Type = +++++
ReqToCap= COS (Secondary Cost)
I have Configure OKGA also but still system is giving error.
Please help me to understand.
Regards,
Vivek

I was wondering if you could help me I am trying to configure the RA key for Refurb orders and when I go into txn OKGB for the Assignment of C/E for WIP there is sample config already there which I copied. But I am having difficulty getting the KK1A to work I am getting the message as outlined above. Could you explain how this OKGB works and how to configure it a bit more fully. In my sample config there is a ReqTOCap section and in it there are letters like ABR, EK, FK, EL what do they mean. This is a screen shot of it. I am not sure how to go about this entirely so any light you could shed would be greatly appreciated. Can you suggest a good resource or documentation you may have, would be greatly appreciated.

How to delete layers not used in any layer comp?

I have a psd with multiple layers and multiple layer comps. Many of the layers are not used in any layer comp. I need to import this file into flash, but I don't want to import anything I don't need. So, I need to delete any layer (particularly text layers) that aren't used in any of the layer comps. I know I could go through and turn on each individual layer comp and manually delete, but the way this file is laid out, that could take years and cost millions of lives.
Is there a more automated way to do this?

You could export the layer comps to files and then re-import them to a fresh file.

Portal: Tab displayed but not assigned to any roles of user

HI Experts,
I have a problem need your great help.
When I logon portal as a specific user, there are 5 tab in home page. When I check the role list, 3 tabs doesn't assigned to any roles this user owned.
Then I try to copy current user into a new user, and logon in . There are only 2 tabs left, which belonged to assigned role.
How those 3 tab assigned into this user? Can we assign iView/Page/Workset directly to user without role?
Any suggestion appreciate. Thanks so much!
Edited by: Jalyn Liang on Nov 13, 2009 9:29 AM
Edited by: Jalyn Liang on Nov 13, 2009 9:30 AM

Jalyn Liang ,
You can find if the user id belong to a particular group with the following ways,
Log in as an admin and go to User Admin -> Users- > Seach -> Enter the user Id and serach for the user -> Select the 5th icon with the tool tip ->Assigned Groups"
or
User Admin -> Group -> Search for the group.
or
You can use UME API to find out whether the is belowng to a group though coding.
Ram

IPhoto 11, how do I view photos that are not assigned to any album?

I am trying to orginize my photo library (iPhoto 11) a bit better. I have 7,500 photos and I'm looking to find which ones are not in any album. I saw sugesstions for iPhoto 09 where you can make a smart folder for that very situation, however I don't see that ability in 11. Any suggestions? Thanks

File -> New Smart Album
Album -> Is not -> Any
Regards
TD

How to identify contacts not assigned to ANY group

Sometimes when I add new contacts on my iPhone/iPad, I forget to assign them to a group. Does anyone know how I can identify these contacts easily so I can assign them to groups later on? I use the Mac's Address Book when I do bulk editing and cleanup of my contacts.

Someone had the same question not long ago. I answered it there:
http://discussions.apple.com/thread.jspa?threadID=2547944
Björn

Form that not request trasport order and it is not assign to any order

Hi Sap Gurus,
I have a form that when we try to change it no order is created. But when we tried to find the order where eventually it is assign we do not find anything.
Can someone tell me the reasons for this?
How can assign that form to a transportable order?
Best Regards
João Fernandes

hi,
I guess it is created without package (development class), as local objetc. You have to assign it to a package and than you can transport the form. You can do this in tocde SE03.
hope this helps
ec

Program To Identify the BP that are not assigned to transactions.

Hai guys,
I want to identify ALl the BPs that are not assigned to any of the Transactions like Oppurtunities,Activities etc in our system,
I can run report bu using the tables But000 and CRM_ORDERADM_H.
Is there any easy way i.e a standard program in the system that does the work.

Follow these steps to get the list of BP's assigned to transactions
1. Copy the order GUID's from CRMD_ORDERADM_H
2. go to table CRMD_LINK paste the copied order guid in place of GUID_HI and copy the GUID_SET.
3.go to CRMD_PARTNER and paste the above copied CRMD_LINK GUID_SET in place of CRMD_PARTNER GUID and copy the PARTNER_NO
4.Go to BUT000 paste the above copied CRMD_PARTNER PARTNER_NO in place of GUID and get the partner number.
Hope this helps out.
Thanks,
Thirumala.

SD card detected but not assigned a device

I have a Dell XPS 14 notebook which comes with a SD card slot. I plug in my SanDisk 8GB card from my camera and the following shows up in dmesg:
[821605.639247] mmc1: cannot verify signal voltage switch
[821605.750637] mmc1: new ultra high speed SDR50 SDHC card at address e624
And that's it. The card is not assigned to any device. lsmod seems to indicate that I have the required modules loaded:
± % lsmod | egrep 'mmc|sdhci|sd'
sd_mod 31361 3
rtsx_pci_sdmmc 13911 0
scsi_mod 132250 4 usb_storage,libata,sd_mod,sr_mod
sdhci_pci 12604 0
sdhci 28820 1 sdhci_pci
mmc_core 95465 3 sdhci,rtsx_pci_sdmmc,sdhci_pci
rtsx_pci 32305 2 rtsx_pci_ms,rtsx_pci_sdmmc
lspci also shows the SD card controller:
03:00.1 SD Host controller: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)
But fdisk -l just shows my hard drive
± % fdisk -l
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 0FBC37E2-A97E-4040-996C-F290C0C9CF0A
Device Start End Size Type
/dev/sda1 2048 1050623 512M EFI System
/dev/sda2 1050624 976773134 465.3G Linux filesystem
Anything else I need to do to get the SD card assigned to a device so I can mount it.

It's considered a removable drive. I have a USB card reader that if I insert it after the computer has been booted it gives me a little trouble, but having it inserted on booting it wants to put the device in a different order.

ABAP Query : user is not assigned to user group

Hello All,
i have created user group using sq03 and assigned user name for change authorization in 'assign users and infosets'.
But when user tries to run query using sq01 system is giving message 'User XXX is not assigned to any user group'.
I tried every thing but facing same problem.
Could anyone please help me out .
Thanks

I actually assigned the user group to a role in SQ10. The user is assigned to the role. I also created a new post under Security which has more detail:
http://scn.sap.com/thread/3198604

Not assigned account in FSV

HI, Expert
I have run F.01 for Balance sheet , when i drill down it show not assign account like first i click on gl account then company code then it shows not assigned ,can any one explan me how it shows
Regards
gk

it not shown in lower level of the FSV , i already checked it assigned in proper place but when i drill down it shows not assigned
I am really confused, you said it is not shown in FSV and again it assigned in proper place. Can you please give me some example for your issue.
Regards,
Ravi

Delete materials not assigned to any plant.

Similar Messages

Maybe you are looking for