BEA-Documentum integration: Image links do not appear

Hello World,
I have installed both WLCS v3.2 and Documentum's WCM Starter Kit and got the
WLCS to retrieve content from the Documentum, but...
How do I get the links to be visible in the portal?
I've tried (and failed) with the information in the Documentum's
WCM_Starter_Kit_System_Install.pdf -guide telling to use
<BASE HREF="http://<server>:7501/ShowDocServlet/<cm:printProperty...etc. />
<cm:printDoc ...etc. />
<BASE HREF="http://<server>:7501/application/exampleportal" />
This same information can be found in on a BEA link:
http://e-docs.bea.com/wlcs310/relnotes/relnotes.htm#37941.
I guess this WLCS v3.1 tip has been replaced in the 3.2 version with the
following new 'baseHref' attribute (I've tried this too, but it failed):
<cm:printDoc id="newsItem" baseHref="http://<server>:7501/ShowDocServlet" />
Should I use this new attribute and how? Or is the v3.1 tip still valid.
BEA tells that these above mentioned workarounds will be fixed in a future
release of WLCS, which version?
Anybody got the same problem (solved)?
Juha

Rajakari -
Since Documentum sets up a new DocumentManager EJB, you will need to configure a
ShowDocServlet instance to use the new EJB home, and then point the baseHref
attribute to the new servlet URL. For example,
I think Documentum setups at "com.documentum.DocumentManager" (I don't remember
off the top of my head -- it should be in either your
weblogiccommerce.properties or your <cm:select>/<pz:contentSelector> tag). Then,
in weblogic.properties, setup the servlet like:
weblogic.httpd.register.DctmShowDocServlet=\
com.beasys.commerce.content.ShowDocServlet
weblogic.httpd.initArgs.DctmShowDocServlet=\
contentHome=com.documentum.DocumentManager
Then in your tag, do something like:
<cm:printDoc id="newsItem" baseHref="/DctmShowDocServlet" />
Hope that helps,
Greg
Rajakari Juha wrote:
Hello World,
I have installed both WLCS v3.2 and Documentum's WCM Starter Kit and got the
WLCS to retrieve content from the Documentum, but...
How do I get the links to be visible in the portal?
I've tried (and failed) with the information in the Documentum's
WCM_Starter_Kit_System_Install.pdf -guide telling to use
<BASE HREF="http://<server>:7501/ShowDocServlet/<cm:printProperty...etc. />
<cm:printDoc ...etc. />
<BASE HREF="http://<server>:7501/application/exampleportal" />
This same information can be found in on a BEA link:
http://e-docs.bea.com/wlcs310/relnotes/relnotes.htm#37941.
I guess this WLCS v3.1 tip has been replaced in the 3.2 version with the
following new 'baseHref' attribute (I've tried this too, but it failed):
<cm:printDoc id="newsItem" baseHref="http://<server>:7501/ShowDocServlet" />
Should I use this new attribute and how? Or is the v3.1 tip still valid.
BEA tells that these above mentioned workarounds will be fixed in a future
release of WLCS, which version?
Anybody got the same problem (solved)?
Juha

Similar Messages

Image in Template not appearing

I haven't touched this template and only visit the site to
update the editable areas. A week ago, links were not appearing at
the top and now nothing is appearing:
see: www.stcpgh.org and the blank white space at the top.
Also, I can see the graphics I put in the editable region on
three different computers, but someone else cannot. There is no
mention on her's of a picture needing to be there either. They just
aren't there and it looks like they shouldn't be.

Your code is strange at the bottom. It ends with
</table>
</div>
<img src="/images/Banne
no image defined, no </html> etc
Jo
"alidog819" <[email protected]> wrote in
message
news:famo0b$585$[email protected]..
>I haven't touched this template and only visit the site
to update the
>editable
> areas. A week ago, links were not appearing at the top
and now nothing is
> appearing:
>
> see: www.stcpgh.org and the blank white space at the
top.
>
> Also, I can see the graphics I put in the editable
region on three
> different
> computers, but someone else cannot. There is no mention
on her's of a
> picture
> needing to be there either. They just aren't there and
it looks like they
> shouldn't be.
>
>
>

BPM Application Link does not appear in BPM Workspace (11.1.1.7)

I spent huge amount of time to reveal why does that happens.
All that follows further is valid for BPM Suite 11.1.1.7.
The scenario.
You developed a simple BPM process with Initiator pattern (maybe by following the "Quote Request" tutorial).
But the application link did not appear in BPM Workspace.
Here i'm skipping any kind of mistakes as "oh, incorrect swimlane", "oh, i did not include the user to the app role" and so on.
At first, you should know about the "feature" - You have to attach task form to the Initiator Human Task to see the App Link.
The simplest way to do that is to AutoGenerate task form (and deploy it, of course).
Else the Appication Link will not appear.
One exception to this rule - If your Task HAS NO PAYLOAD (no parameters) the Task Form is not required (to appearing of the Application Link).
The second find is a bug (is think so).
If you edited the Role that Attached to the swimlane of Initiator Task, you will not see the Application Link.
If you look to organization.xml you will see something like this:
        <ns1:applicationRole id="StartTask.InitRole" isProcessRole="true">
            <ns5:name>StartTask.InitRole1</ns5:name>
            <ns1:processRole id="InitRole" name="InitRole1"/>
        </ns1:applicationRole>
The Application Link will appear ONLY IF THE "applicationRole id", "applicationRole name" and "processRole id" have the same value.
When you edit name of the application role in Organization Editor you change "applicationRole name" and "processRole name" values.
After that "applicationRole id" != "applicationRole name" and the Link does not appear.
How to fix?
Just edit organization.xml (with external editor) - change the "applicationRole name" to the value of "applicationRole id".
That allows to have value of "processRole name" something like "The Initiator Role" - that value appears in the BPMN diagram of process.
Also you can edit organization.xml with Organization Editor and set the Name to the value of "applicationRole id".
In that case the associated swimlane will have the same name as the "applicationRole id".
Hope this helps somebody
Oleg

Flash Player is a browser add-on, not an executable program.
If you need to open a local SWF file you will need the standalone player (Projector) from http://www.adobe.com/support/flashplayer/downloads.html
Note that the download is the player, not an installer, so you will need to make the file association manually.

TOC links are not appearing in RoboHelp 9

Hi team,
I am facing a big trouble.
I am creating an online help using RoboHelp 9. The help has 133 topics. My problem is that after generating the help, few topics are not appearing in TOC. A blank page appears. If i relink the topic, it comes fine but at the same time some other links starts not appearing in the TOC. Please help.
Regards,
Garima

Hi there
In addition to what Colum is asking, I'm going to ask/suggest this. If indeed the Topic Pane simply appears blank, try right-clicking the pane and see if you can choose "View Source". If a window or application appears that lists the HTML code, it means the topic indeed loaded but is probably having issues presenting the content. And if that's the case it's an entirely different can of worms from a troubleshooting perspective.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Logout link does not appeared in exception page

When exception is thrown , the logout link is not appeared in the exception page. By default , we select error page in themes as two level tabs.
Where can I get the error page for the themes. Is can i see the code for error page , if possible.
Please help me out.
Thanks,
Sesha

THANKS ITS WORKING FINE NOW>
WE ARE USING 3.0.9. Actually there was a problem with the template which resulted in the Link not working.
Thanks

Edit Page link is not appearing in Portal???

Hi All,
I created a Web Page, custom layout and published in WPC and created a role & folder for that web page in PCD.
I am able to see the role and the web page in Portal but "Edit Page" link is not appearing in portal.
I am the owner of the page.
Where to give the permissions?
Thanks
Thruna Shanmuga
Edited by: Thruna Shanmuga on Jul 9, 2009 2:56 PM

Check this link :
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/1083635f-e977-2a10-15ac-b0072abf941b?overridelayout=true|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/1083635f-e977-2a10-15ac-b0072abf941b?overridelayout=true]
It should be like :
<%@ taglib uri="prt:taglib:com.sap.portal.reserved.layout.WpcTagLibLayout" prefix="sdn"%>
<%@ taglib uri="prt:taglib:com.sap.portal.reserved.layout.TagLibLayout" prefix="lyt" %>
<lyt:template>
<table id="SAPexample2" border="0" cellpadding="0" cellspacing="0" width="100%" frame="VOID">
<tbody>
<tr>
<td colspan="3" width="100%">
<sdn:container id="pageheaderlinks" />
</td>
</tr>
<tr>
<td colspan="3" width="100%">
<sdn:container id="top" />
</td>
</tr>
</tbody>
</table>
</lyt:template>

How can I cancel my subscription if the "Cancel Plan" link does not appear in the screen?

From your manual, you instruct the users to cancel the plan by accessing the manage plan screen and then click on the Cancel Plan button.
However, how can the user cancel the plan if the Cancel link does not appear in the membership details screen?

You need Adobe support to cancel a subscription
-cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-or http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Form link does not appear in email notification.

Form link does not appear in email notification
We have added a custom notification to the OM workflow process. The notification itself has a form attribute which provides a link to the sales order form. This works fine when notification is viewed via worklist - notifications within apps. The link does not appear in the email notification.
Is there any alternate way to provide a form link to Oracle Applications form that can be accessed via email (after logging into application, if the user is not logged in).
Thanks

Similar functionality is available in PO and Req Approval process. Can you take a look at the PO Approval Process workflow? I remember the email notification does show the link, which is a URL link and has parameters in it. This functonality provides where the approvers need to modify the document which is requested to be approved. So they can click on the link, modify and close and approve if necessary.
Are you expecting them to modify the same or you just want to show query only screen?
There is a webpage available to see order information called Order Information (user Order Information User resp). You can send parameters to that webpage and that should show login page opening up a seperate session with all the parameters in the URL. Once logged in that should show order information.
Thanks
Nagamohan

Podcast Cover Image & Recent Podcasts Not Appearing

I know this question has been asked before, but I can't seem to get the Podcast Cover Image to appear on my client's iTunes podcast page both within iTunes and on Apple's iTunes website. When I'm subscribed to it, it does show up. What am I doing wrong?
Additionally I'm having a problem with my last 3 podcasts not appearing, and I can't figure out what happened there.
Below are links to the page on Apple site and the feed I'm using, but please let me know if I need to provide more. Any help would be greatly appreciated!
https://itunes.apple.com/podcast/living-grace-lutheran-church/id348311926?mt=2
feed://livinggraceomaha.org/lg-sermonpodcasts.xml

Your feed is OK, except that most of your episodes do not have 'guid' tags, and your enclosure tags are missing the 'length' attribute which should show the file size in bytes. Neither of these is serious and they would not cause a problem.
The Store does go through slow patches sometimes: there have been numerous occasions when people have complained about not seeing updates for two or three weeks, and I'm afraid that you've probably just hit one of these. There isn't really anything you can do about it. You could try emailing them at podcasts 'at' apple.com, but frankly you are likely to get a form answer telling you how to add episodes (which you already know). I'm afraid that it's just a question of waiting.

"Save Image As" does not appear on the right click menu of an image I want to save.

Trying to save images as a file to my desktop/laptop. I right click on the image and the menu appears. The entry Save Image As... is not present on the menu. How do I get the menu to show this entry?
I've heard that the problem may have something to do with plug-ins, but I've reinstalled and disabled each of them. It didn't change anything.

Does that happen with all images or only on specific web pages?
Can you post a link if the later applies?
Can you save the images via Tools > Page Info > Media ?
To be sure:
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
You can also try "Reset all user preferences to Firefox defaults" on the [[Safe mode]] start window.

Plug in my iPhone to Mac; image capture does not appear

Software OS X 10.8.5 (12F45) on MacBook Pro
iPhone: Version 7.1 (Is it an iPhone 5: LOL… I don't know! It's the newer taller, round one!)
When I plug in my iPhone to my MacBook… my pictures do not load like usual.
(Same thing when I put in a photo card)
Sometimes the device will appear; but import is not an option to select.
EVEN if I change the parameters down on the bottom left to Image Capture, iPhoto, etc.
Usually, my phone will appear on the left hand side and I am able to click Import.
However; this time NOTHING happens.
Can someone please help?
All the directions I have read through (dozens!) for the last 5 hours do not give the step on what to do IF the Image Capture does not work.
Same thing in iPhoto. Nothing. Nada.
I have plugged and replugged.
Tried different cords.
OH, help! Please!

Hi solutionfocused,
Welcome to Apple Support Communities.
It sounds like there is an issue importing photos with multiple devices and applications on your Mac. The article linked below provides a lot of great tips that may resolve the issue, like taking a screenshot to ensure there is a new photo to be imported since the previous import.
iOS: Unable to import photos to computer
http://support.apple.com/kb/TS3195
I hope this helps.
-Jason

I SELECT A GROUP OF FILES AND GO TO IMAGE PROCESSOR TO CONVERT FROM PSD TO JPEG. THE IMAGE PROCESSOR DOES NOT APPEAR ONLY A BLANK PS SCREEN

How do I find image processor? It does not appear when I go to, tools, photoshop, image processor?

Double click the thumbnails you want in Bridge to open in Photoshop.
You can also first open the Image Processor and select a folder that you keep your files in. You do not have to open them first.

The index link does not appear in italic. What do I do wrong?

The primary definition of the glossary term does appear in bold, but the secondary (index link) term does not appear in italic. I also can not format the word in another color or typeface. Any ideas on how to fix this?

Try one of your other USB ports. Be sure to insert it with the plated fingers pointing upwards.

ITunes Store image links do not display - previews & purchases do not work

PLEASE HELP!
Below are the images of what I am seeing.
And I promise you I have really made an effort to research and try to resolve this without success. I have even run iTunes on a completely seperate computer and a different login (both OS user login and iTunes store login) and have the exact same issue.
I have reinstalled with a reboot (several attempts), performed a winsock reset, followed procedures in TS4123 for LSP conflicts, I have cleared my cache, I have checked for Firewall issues, I have restarted my cable modem, I have copied iTunes store links to a browser to check that images are displaying - nothing resolves this problem.
Email support has only recommended what is already posted in communities forum and on the knowledge base.
I have seen that in past there have been posts related to this specific issue but were not answered (for what I found). It seems that unless you are having a complete white screen when accessing the iTunes store that there is no solution for a problem like mine??
Also only "Ping" will display all images for image links.
Thanks in advance for any help / feedback!
and
* .... I should reiterate that I can not make any purchases, save to wish list, watch or listen to previews.

Update:
Still trying to resolve this problem (been working on it for the better part of 2 days now)
KB - TS1379 ( http://support.apple.com/kb/TS1379 ) Also does not resolve this issue...
Still need help please.

Images does't not appear

There is what I see if I open the .htm file in the directory:
When we visualize the project in our intranet or directly in the project, the images become with red X instead of the image.
This problem occurred after we build the project following modifications.
When I look at the properties of my book, I see that the link is on the correct file extension. htm. If I go into the directory where we saved the project and I open this file. htm, the image is correct
I checked in the Adobe Online Help and I found an note about the images. I changed in the "Document Framemaker" an option. I unchecked the option to generate images every time as it was advised in the conversion settings. But without success.
Thank you in advance.
There is what I see when I open the project or The Intranet:

Just for your information, we have never been able to add sub-project in a master without cheating.
According to the procedure described in the manual and online help. It never worked. To get to add a subproject in the master project, here are the steps we need to do:
1 - Compiling the subproject
2 - We need to copy files from the sub-project and go paste them into the master directory \! SSL! \ WebHelp \ mergedProjects \ subproject
3 - And we finally generate the master so that everything appears
About sharing my project, I'll see what I can do.

BEA-Documentum integration: Image links do not appear

Similar Messages

Maybe you are looking for