Because I'm apparently meant to ride the short bus...
I'm sure this is the thousandth time this has been asked but I can't sync my iPhone with my iTunes. If I read the support articles correctly, the only way I can add songs is to sync with this computer and erase everything on it? My last computer died and I don't have access to the stuff I had burned previously and added to my phone.
See if this helps: https://discussions.apple.com/docs/DOC-3141
Another vode for deggie's recommendation that you go get an external drive and start backing up. Both Windows and OS X have backup utilities built in. Sooner or later, you're going to lose something much more important than some music and your saved games...
Similar Messages
-
I want to switch to the u.s store as I now live in the us, I cannot switch stores because my balance is $1.41 in the oz store and needs to be zero, how can I get rid of the $1.41 when everything costs more or less than that? I do not have a credit card on the oz iTunes account an I cannot use my us one to top it up.
HELPClick here and request assistance.
(60992) -
I have an older version of itunes stuck on my computer and because of an apparent pathway missing it wont let me uninstall and reinstall the newer itunes....anyone know how to fix this issue?
What's the precise text of that message please, jeremy? (There's a few different ones I can think of that you might be getting.)
-
Can I over-ride the default setting in Organizer to allow sorting photos by filename ?
I am converting slides from the 1970's and 80's to digital files and using PSE 8 to Organize them but it is important to me that they stay in the order of the file name I give them and NOT "Date: newest first or last" because it would seem that PSE, in the absence of metafile information, uses the date and time I uploaded the file to the Organizer as the "Date:". ACDSee has a much more sensible arrangement in giving me full control of how my photos are sorted. I am being driven to using ACDSee as the organizer and PSE as the photo editor, a not very convenient arrangement. So my question is, "Can I over-ride the default setting in Organizer to allow sorting photos by filename ?"
The type of file system that you're trying to set up, is actually done better by creating you own file heirarchy in Windows, and then viewing by import batch. For example; you might create a top level folder "My Slide Scans", then perhaps, "My son John". So, the scans of john all go in the same folder, you import the folder in one batch, and you're where you want to be.
That said, PSE will fight you at every turn to do this, since with the scanner hooked up with PSE, PSE is going to want to store your photos in "scanned photos" and import them as you scan them.
I woud suggest this. After the scan and import, use PSE to move the photos to their final destination folder, say " Hawaii 1994", and create a tag of the same name". Then when you're done scanning photos of this event, use the tag to view all the scans at once. Then, delete all the photos from the organizer. (Yeah, sounds radical I know). Take heart! All you've gotta do then is to reimport the whole folder. All the same name photos will be in one import batch. And with all the photos of any given topic in one folder, you'll be able to also use Windows Explorer in any number of modes to view the photos outside PSE.
Keep in mind you can rename batchs of photos by selecting them, or by import batch or even tag, then "Ctrl. > Shift > N" will bring up the name change dialog box.
This technique is quite contensious, but, it makes a whole lot more sense than storing all your photos in the "My Photos" folder on the "C:/" drive where any viral or malware hiccup might cause the necessity of a reformat, which could cause the loss of years of work.
If a name search is a priority, that would be "Ctrl ."Shift" > "K" then type in whatever your heart desires.
Caution: Before attempting a delete/ reimport manuver, Alway, always, write the tag and file info to the photo. "File" >"Write Tag and Properties Info to File".
I always am quite adamantine about suggesting that you do NOT use the same physical HDD that contains Windows to store your photos, that's just asking for trouble. HDDs are quite cheap nowadays, and they're worth every penny in piece of mind. Plus to use a storage ("Volume") drive, you have to create your own file heirarchy anyway, so that leads right back to the beginning of this discussion. -
My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module. That means that I can correct exposure, highlights, shadows etc. but once I go to another picture and returned to the edited one the histogram (on the edited photo) and specifically the clipping triangles are white or some other color. This is normally suppose to indicate that some channel or all channels are clipped in the highlight/shadow areas. If I adjust any slider in the Basic panel even as little as one +/- value or press the J-key, the histogram will now show the original edit. Moving on to another photo and then returning to to previously edited one and again the edits are "not saved" and I have to hit the J-key or adjust a slider to see the previously edited information reflected in the histogram.
This is especially frustrating for fours reasons. If I have edited a shoot and return to it I cannot see from the clipping information whether the original edit was correct and of course I might re-edit it (to some now incorrect value). This brings up the second issue synchronization. I can't rely on it because if I go back to fine tune a specific image in the batch the triangles are white or some other color for that and every image. I have to hit the J-key to show/hide clipping or the back slash key to see before/after previews. This is the third issue which is very time consuming and inefficient regarding my workflow. The forth issue is that I have noticed that normally when an image is saved in PS, LR adds a copy of the saved version to its catalogue. I have noticed that the PS to LR saves are all wrong in terms of exposure (they are much lighter in tone) than the original LR edit and the PS edit on my screen. If I check the PS to LR photo in LR I notice that the Basic panel values have been changed and that I have to sync the image with the originally edited RAW/NEF LR file to get it to look the same.
Note 1). I am using an Apple cinema display and a calibrated Eizo ColorEdge monitor to view my NEF files. I have reverted back to using LR 4 however I am not sure if I should expect compatibility problems with Camera Raw 7.4 in LR 4 vs. Camera Raw 8.6 in LR 5.
Note 2.) I am going to do an import converting everything to .dng to see if this is a work around.
Note 3). I would be interested in knowing if this issue is related to the PS RAW engine ver. 8.6, the Adobe created NEF calibrations or LR 5.
Note 4). I have duplicated this issue in OS X 10.8.5, OS X 9.xx and OS X 10.10.1
Hopefully someone else has noticed this problem. Any shared information would be valuable. Thanks for the reply.Happy New Year!
The Develop panel Tone settings in your Dec 31 screenshot show both the Highlights and Shadows controls set to negative values (-48 and -19). For most images (such as this model shot) they should be set to opposite values (-Highlights and +Shadows). To try and duplicate your issue I used negative values for both of these controls with a similar high contrast image. I noticed that the Shadows control becomes non-linear when both the Highlights and Shadows controls are set to negative values. As I moved the Shadows control from a positive value the Shadows clipping indicator comes ON as expected. Moving the Shadows control to a value caused the clipping indicator to turn OFF and moving it further negative caused it to turn back ON again.
The following screenshots demonstrate the issue with only Highlights & Shadows controls applied as shown.
The Highlights & Shadows controls set just to the threshold of extinguishing the clipping indicators.
Moving the Shadows control toward negative causes the Shadow clipping indicator to come ON (as expected), but at-13 it goes OFF again!
Moving the Shadows control further negative causes the Shadows clipping indicator to come back ON at -33.
This is probably normal behavior for the PV2012 Image Adaptive Tone controls as they were not designed to be used way (- - or ++ Highlights & Shadows). The PV2012 Tone controls all interact with each other, which is why it is suggested to adjust them from the Top down starting with Exposure. For most images using -Highlights and +Shadows of near equal value produces good results.
I still can't duplicate the change in clipping indicators after selecting another image, so it may be unique to certain camera models and/or lighting conditions.
SUGGESTION
Try one of the image files that exhibits this issue using the following PV2102 Tone control adjustment procedure:
Start with all of the Tone controls at their default 0 settings and adjust them from the top-down in the order shown below.
Set Exposure to correct midtone brightness ignoring the highlight and shadow areas for now. Setting Exposure slightly higher (+.25 to +.50 EV) than what looks correct for the midtones seems to work best with most images.
Leave Contrast at 0 for now. It’s usually better to adjust this after the first pass.
Adjust Highlights so that blown out areas are recovered and “fine tonal detail” is revealed.
Adjust Shadows to reveal fine detail in dark areas. For most normal images simply setting +Shadows = -Highlights (Example +50 and -50) works very well.
The Whites control sets the white clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
The Blacks control sets the black clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
Now go back and adjust the Contrast control to establish the best midtone contrast
If necessary “touch-up” the controls using the same top-down workflow.
If the issue persists I suggest Exporting an image to DNG file format with the settings that exhibit the issue and post it to Dropbox or other file download site. -
Anyone have problems with apple ID's? I have the correct ID in my settings but when I try to update my apps my ID shows my first name and last name but not my ID? I'm not sure what else to do because I've made sure I have the correct ID in my settings! Anyone else have this issue?
I think its meant to show your name, not your ID.
-
I apparently got stung with the Adobe flash virus and now I cannot open any Adobe .pdf files from the internet. Fix?
Go to F_Secure's Flashback Removal Tool web page, download their Flashback trojan detection/removal tool, and follow the instructions you find there.
Also install the latest java update which also tries to remove these trojans.
Java for OS X Lion 2012-003
And only download the adobe flash plugin from the adobe site.
Update:
Just because you cannot download pdf may not be an indication of the trojan. There's been a number of reports about problems like that with pdf's. Look at the More Like This section on the right side of this page. -
I tried to run BootCamp on my new macbook pro, but i could not partition because of an apparent bad sector.
I reformatted the macbook, but the mac could not even boot up Mac OS Lion.
As such, I had to go down to my retailer and reinstall Lion.
What exactly went wrong?When I tried to bootcamp a few days ago, the partition could not work.
My technician told me that there is a bad sector.
So he reformatted, and Lion disaappeard. There was no O.S at all.
I went down to my retailer just now.
They ran a system check on the RAM, and the HDD.
They did not find any bad sector, and everything was okay.
They reinstalled Lion and now its okay again
But I'm afraid to try and bootcamp again because they same thing might happen? -
"/dev/sdb2 is apparently in use by the system" when it shouldn't be.
I'm attempting to format a partition on my second hard drive in preparation to install Arch, and I'm getting the message:
/dev/sdb2 is apparently in use by the system; will not make a filesystem here!
I have checked the forum for an answer and found that it was possibly an issue where the system believed it was in a RAID:
https://bbs.archlinux.org/viewtopic.php?id=149532
Unfortunately i tried this and it didn't work. I was also told to attempt "cat /proc/mdstat" to see if it told me any RAID was running, but no luck there.
This is during the installation of Arch on a USB. I've got a Windows Partition and that's all on the drive, all the other data is redundant. I've also tried unmounting them, and even deleting the partition and rewriting it in cfdisk (since the data isn't needed).
Does anyone know what this possibly may be?In my case the cause was an udev rule for automounting usb drives that I had created. This wasn't apparent to me at first because the drive didn't seem mounted (checked with 'cat /proc/mounts') or in use (checked by 'lsof /dev/sdc'). After seeing that there were systemd devices with the name of that device ('systemctl | grep sdc' ) I remembered the udev rule. After disabling the rule I could format the usb drive.
Last edited by rwd (2015-01-11 12:33:22) -
CS5 The selected file cannot be linked because its type (audio) does not match the original file's t
Greetings,
I have been working on a very large project using CS5 on my desktop computer. Now I am on the road and bought a laptop so that I can continue to work. I placed all of my assets on a back-up external 2tb drive (which I was able to open without incident on my desktop). I installed CS5 on my new laptop and now when I try to open the project I get the following message "The selected file cannot be linked because its type (audio) does not match the original file's type (audio and video)". This message appears before I indicate the path to any of the assets. Then, when I do indicate the path to each asset, I get the same message for individual files.
Any advice is appreciated.
Thanks,
JeremyI had this problem and have found a solution / workaround: my issue was when trying to open a cs5 project that had been collected on mac and then transfered to pc, my footage was all png image sequences but this will hopefully work in other situations...
Open the project and cancel the first dialogue box that pops up where you get the "file cannot be linked" error when trying to reconnect footage. The project will open and then in the project panel, right click on any footage that needs reconnected and choose "Replace footage..." this will open a dialog that will allow you to select the file that gave you the error in the first place without any issues. Any sequences with that footage will now work and everything show be all good.
You may experience "Offline material is present in this export and will be encoded using the offline media graphic" on first export but apparently you can just ingore that, but i guess it's woth testing a few short sections before commiting to a huge render...
This workaround isn't perfect as i had about 50 pieces of footage i had to relink via this method one by one but at least it saved redoing the edit which was critical for my project...
good luck! -
Over ride the equal method in java
Hi ,
I have doubt about on over ride the equal ? What is the main purpose of over ride the equal method ?
If equal method is override then why hash code method can be over ride?
sorry , If i am not post the right place .You have to override the equals method when your class has a notion of logical equality, because in that case you need more that the default one (the default one return true only if the reference of the compared Object is the same).
A good exemple is Date, where we consider that is two Dates have the same getTime() they are equals.
You can found more information in this article:
http://java.sun.com/developer/Books/effectivejava/Chapter3.pdf
Edited by: yannig on 16 déc. 2010 03:42: Joachim beat me...
Edited by: yannig on 16 déc. 2010 03:45 -
Can't install the software for the Brother MFC-9440CN because it is not currently available from the Software Update server....how do I get the driver then..it ised to work in my old mac..but cant print to it in my new unit
Download the Brother Mountain Lion drivers here.
-
As the topic says,
What cable do I need to buy to connect my Macbook Pro (2011) to a VGA screen? I tried the "Mini DisplayPort to VGA", but apparently it doesnt fit the 2011 Pro version...
Help me out please.Yes ... minidisplay
But what I do not like in that picture (my personal view, others may think differently), is that there is much plastic around the connectors where the cable must fit. You may ot may not be able to get the cable to *fully seat* with the adapter.
Other adapters (http://www.microcenter.com/single_product_results.phtml?product_id=0334087, yes I know this is a DVI) hve no plastic barriers to connections. -
Request timed out because there has been no reply from the server in 600000
Issue:
Request timed out because there has been no reply from the server in 600000
Scenario:
1. All the crystal reports are designed by using Crystal Report 2008 Version -- 12.3.0.601
2. All reports are uploaded to CMC (SAP Business Objects Enterprise XI, Product: 12.1.0)
3. using Front-End .net Winform
4. Crystal Report is binding is done using Business View Manager (since having more than one databases)
5. Business View Manager Connects to Oracle using "Oracle Server" connection
6. Loading reports as follows
string queryString = string.Empty;
SessionMgr sessionMgr = new SessionMgr();
EnterpriseSession enterpriseSession = sessionMgr.Logon(userName, userPassword, serverName, authType);
EnterpriseService enterpriseService = enterpriseSession.GetService("InfoStore");
InfoStore infoStore = new InfoStore(enterpriseService);
enterpriseService = enterpriseSession.GetService("PSReportFactory");
Object psrfObject = enterpriseService.Interface;
PSReportFactory psReportFactory = (PSReportFactory)psrfObject;
queryString = "Select SI_CUID, SI_ID, SI_NAME, SI_PARENTID From CI_INFOOBJECTS " + "Where SI_PROGID='CrystalEnterprise.Report' " + "And SI_ID=" + ReportId;
InfoObjects infoObjects = infoStore.Query(queryString);
InfoObject infoObject = infoObjects[1];
ReportDocument crDoc = new ReportDocument();
crDoc.Load(infoObject, enterpriseSession);
7. All the reports are getting loaded properly and i am able to dynamically set the report parameters
8. After executing report, some of the reports take more than 10 minutes, due to which shows following error
Request timed out because there has been no reply from the server in 600000
Note i have done following:
1. I have checked stored procedure running through oracle for more than 10 minutes (1 hr, 2 hrs)
2. Tried simply running crystal report without front-end running perfectly more than 10 minutes (1 hr, 2 hr)
3. When i run .net winform application for specific reports which takes long time, gives "Request timed out because there has been no reply from the server in 600000"
Also i have done lot much R&D and spent almost weeks to get resolution but not getting any solution out of it, please help me in this case
HKEY_LOCAL_MACHINESOFTWAREBusiness ObjectsSuite 12.0Report Application ServerClient SDKCorbaAdapterWaitReplyTimeout = 600000 and HKEY_LOCAL_MACHINESOFTWAREBusiness ObjectsSuite 12.0Report Application ServerInprocServerEnterpriseRequ
AS per following URL
Session timeout
1. Log into Central Management Console
2. Go to server,right click on Crystal report processing server and select properties,change the idle connection time out to 60 minutes
3. Also right click on crystal report cache server and select properties ,change the idle connection time out to 60 minutes
4. Restart Crystal Report Processing Server and Crystal Report Cache Server
5. Change the session time out to 60 minutes in web.xml of INfoviewApp,InfoViewAppAction,PlatformSerivces and CrystalReports.
6. Navigate to the following location
<BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppWEB-INF
7. Edit the web.xml in notepad and search for the below lines.
<session-config>
<session-timeout>20</session-timeout> <!-- 20 minutes for session objects -->
</session-config>
8. Increase the Session-Timeout parameter to 20 to 60 minutes in web.xml . Save this file
9. Repeat the same for the web.xml file in the InfoViewAppActions folder in <BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppActionsWEB-INF
10. Repeat the same for the web.xml file in the PlatformSerivces folder in <BO Install Dir>Business ObjectsTomcat55webappsPlatformSerivcesWEB-INF
11. Repeat the same for the web.xml file in the CrystalReports folder in <BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppActionsWEB-INF
12. Restart the tomcat server
Still i am getting same error, please help me, if you have any idea, clue with respect to this error on winformThis error is specific to RAS. The default CORBA request timeout is 10 minute = 600000 ms. When the RAS SDK does not get the reponse back from RAS server in 600000 ms it throws this message. Why it works in InfoView\CMC what I believe you refer to as "Front End' application is because InfoView\ CMC don't use RAS.
1. First make sure that a smaller report wich runs pretty fast ( 1-2 min) works. This will confirm that there is no connectivitiy issues between RAS and RAS SDK.
2. If you get the efrror for every single report, even the smaller ones, make sure the box running RAS and RAS SDK code( in case they are 2 different) can ping each other with IP, shortname and FQDN. If there is a firewall between them, the RAS port needs to be opened for bidirectional communication. By default RAS chooses a random port for communication with SDK but within CMC you can configure it to use a specific port and open it.
3. If the issue is specific only to reports that are long running, typically more than 10 minutes, then you need to inclease the CORBA timeout to a value more than what the reports typically would take to process. This is done on client code side or IIS in this case.
Here are the steps:
Make the following changes on the application server/system.
Open RegEdit by going to Start > Run and typing in regedit.exe. Then click Ok.
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Report Application Server\Client SDK\CorbaAdapter
Change the value of SendRequestTimeout(ms) to 100000.
Change the value of WaitReplyTimeout(ms) to 6,000,000 ms. The default value is 600,000 ms and may not be long enough.
Restart IIS by going to Start > Run and typing in iisreset. Then click Ok.
Retry the failing application.
See note: 1296656
This error should be easy to fix
Edited by: Aasavari Bhave on Feb 2, 2012 11:20 AM -
Can't install the software because it is not currently available from the Software Update server. this is the message that i get a few days now that i am trying to install windows through boot camp to my macbook!does anybody knows what i can do????
You keep it on the usb stick for after you boot into Windows. From Windows you install the Windows Support software on the stick. Do you realize that you need to buy and install Windows? The Windows Support software you downloaded is only the Windows drivers for your hardware.
Read the Boot Camp installation instructions and help guides located here: http://www.apple.com/support/bootcamp/
Maybe you are looking for
-
1. could I connect an external USB3 drive to my macbook pro (15" MID 2010)?
Trying to connect I can't see it. 2. Question: Is it mirroring possible with apple TV on MacBook pro 15" MID 2010?. Playing a movie with VLC can I send it to TV? Could you please give me an advise?
-
Unable to save reports to enterprise from Crystal Reports 2013 and Crystal Reports for Enterprise
Dear Expert, when we tried to save report to enterprise, error happened: "Failed to find a Report Application Server." We closed BO server firewall. We could check report from PC by browser. But when we save report from CR 2013, then error happened.
-
Full screen artwork (for those late nite jams)
So.... it's Friday night, your friends are round, you've sorted your music for the night by queuing a shedload of music.... now we're on 'Play Queue' and I'm stuck looking at the interface - boring! It's time for some atmosphere - no need for fancy v
-
Hi, Can somebody explain how to instantly process the data buffer entries of the type 'Query' and status 'Error'? The 'Reset' is not doing anything. Regards, Chanti.
-
An unknown error occurred (4002).
Been getting this all morning when trying to update iTunes Match, tried logging out and back in, restarting iTunes, nothing. Using iTunes 10.7 on a MacBook Pro... Anyone else with this issue?