Before and After in Elements Editor

In the elements editor I choose to display both the before and after on the screen simultaneously. Each change to the photo changes both photos-rendering the before photo useless. Certainly that is not the intention.
HOW CAN I RETAIN THE "BEFORE" AND CHANGE THE "AFTER"?

John,
I assume you're talking about the "New View" feature. This isn't intended
to give a before/after view. It creates another window showing the exact
same image. The idea is that you can zoom in tight on a small area and make
corrections while seeing the overall effect at the same time in another
window viewed at a different magnification. You could also use it to show
two different areas of the same picture side by side for comparison while
working.
If you want a before and after, you can use the "duplicate image" feature to
make a copy of the file you have open. You could then place them side by
side for comparison.
Another way to to it is to create a blank layer at the top of the layer
stack and then press ctrl-alt-shift-e to merge all the visible layers and
place the composite in the new layer. Then you can toggle the layer off.
Work on the image as you wish. When you want to see the "before", toggle
the merged layer on.
I like to work with separate layers for each step. For example, if cloning,
I create a new layer and clone to the new layer. That way, I can toggle the
layer I'm working with on and off to see the before and after.
I've given you three ways to see a before and after. I hope one of them
will prove useful to you.
Bob

Similar Messages

OIM11g: Notification Event, before and after data elements

Hello
I have several notification events currently working correctly. I would like to, however, create a new notification event that contains the before and after value of a changed attribute.
For example: if user email address changes, notification should be similar to:
This is a notification that your email address has been successfully updated in the system. Old value: [email protected] New value: [email protected]
Notifications seem to only be fired as post process event handlers, process tasks, and scheduled tasks, is it possible to have both the before and after datasets available to the notification in any of these tasks?
Thank you.

If it's on a user object field, you can check for if the attribute you are watching is contained in the orchestration.getParameters(). If it is found, you can pull the old value out of the following:
HashMap eventDataHashMap = orchestration.getInterEventData();
Identity currentUserState = (Identity) eventDataHashMap.get("CURRENT_USER");
Then you can generate the email/notification however you'd like.
-Kevin

Missing space characters before and after span element (TLF 2 with Flex 4.1)

It seems there's a bug, I reported it at
http://bugs.adobe.com/jira/browse/SDK-29367 .
(I wasn't able to specify "TLF" in the "Components" dropdown, that's why I'm posting the bug report URL here in the TLF forum.)
Tobi

I think the problem may be that you have "ignoreWhitespace" on the XML object set to true, so the spaces at the start and end of elements are being removed. Try setting it to false.
- robin

Elements 9 - Before and After Picture View?

I like working on photos when I can see the original picture on the left and the picture I'm editing on the right so I can 'see where I'm going' with my changes.
I'm currently trying out Elements 9.
When I work with the 'Guided' or 'Quick' Editing sections (right side) I have a drop down box that gives me the following options after the word View on the left side: 'Before Only', 'After Only', 'Before and After Horizonal', and 'Before and After Vertical'.
But when I go to the 'Full Edit' mode that drop down box disappears.
How do I get a Before and After Photo to show on the screen when I'm in 'Full Edit Mode'?
Thank you for your help.
TripleB

Simply use a duplicate layer or adjustment layer before starting your edits and then you can click the eye icon in the layers pallet.
You can click on and off to see before and after as you do more editing.

What is the best app for before and after photos for my Mac?

I am looking for a program or app for my mac so i can put pictures up side by side.... like before and after photos. Any suggestions?

best cheap solutions.
acorn
https://itunes.apple.com/us/app/acorn-4-image-editor-for-humans/id634108295?mt=1 2
pixelmator
http://www.pixelmator.com/
Fotor (my fave) and FREE
https://itunes.apple.com/us/app/fotor-photo-editor/id503039729?mt=12
FXphoto studio
https://itunes.apple.com/us/app/fx-photo-studio-pro-effects/id312506856?mt=8

Report showing costs on cost Centers before and after Cost Distribution

Hi experts,
Is there a report that shows the costs on a Sender / receiver Cost center/Cost elements before and after the distribution cycle is run. What I am looking for a report that shows the costs on Cost center/Cost Element before the cost allocation cycle is run, the allocated costs in different columns.
I would appreciate if some one could let me know the tables to fetch the values for the same ( values before allocation, allocated vlues for the month)
Thanks,
Vijayanth

Hi
S_ALR_87013611... there are many such reports.. U cud have browsed the easy access menu very easily
Regards
Ajay M

Possible to get JComboBox before and after chaged value?

Hi,
I have a JComboBox... whenever the JComboBox value change is it possible to get the before and after changed value? For example:
Let says the JComboBox is showing "One" and the user change it to "Three" after the user chged... I want to System.out.println before chged value ("One") and aft chged value ("Three")
I tried:
put in some code in the itemStateChanged() method... but no success...
Can someone pls provide some pointer or sample code...
Thank you for your time...

Ok, I lost half a day on this (novice problem), but I arranjed a solution that resolve the problem totally. There is the code:
YourComboBox.addFocusListener(new java.awt.event.FocusAdapter()
        int aux_selected;
        // if YourComboBox gains Focus
       public void focusGained(java.awt.event.FocusEvent fe)
            // get index value of selected element
           aux_selected= YourComboBox.getSelectedIndex();
           // create a variable for storing de ItemListener
          ComboBListener = new java.awt.event.ItemListener() {
               public void itemStateChanged(java.awt.event.ItemEvent e)
                   if(e.getStateChange()==java.awt.event.ItemEvent.SELECTED)
                       // compares the selected value with the old one
                       if (aux_selected!=YourComboBox.getSelectedIndex())
                       System.out.println("ComboBox Changed !");
           // add the variable Listener to your Combo
           YourComboBox.addItemListener(ComboBListener);
       // if focus is lost
       public void focusLost(java.awt.event.FocusEvent fe)
          // remove the itemListener from the combobox
         YourComboBox.removeItemListener(ComboBListener);
//Put the Listener variable outside
private java.awt.event.ItemListener ComboBListener; //----------------------------------------------------------------------------------------------------
You only have to change YourComboBox by the name of the combobox.
To all people that help this forum (specially from PORTUGAL) and all java people: YOU ARE DOING A GREAT JOB

Do we have a way to get the differences between xtext model before and after partial parse?

Do we have a way to get the differences between xtext model before and after partial parse?
As an example i have file contains 4 lines, xtext parsed this file and generated its model, then i made small modification in line number 3, so xtext partially parsed the file and generated another model.
The question is could we get the nodes that has been deleted from the model?
could we get the new nodes added to the model?
could we get the differences between the two models?

Workflow {
bean = StandaloneSetup {
scanClassPath = true
platformUri = "${runtimeProject}/.."
// The following two lines can be removed, if Xbase is not used.
registerGeneratedEPackage = "org.eclipse.xtext.xbase.XbasePackage"
registerGenModelFile = "platform:/resource/org.eclipse.xtext.xbase/model/Xbase.genmodel"
component = ParseXextModel{
//Load the xtext model and keep the reference of the inmem model
component = DirectoryCleaner {
directory = "${runtimeProject}/src-gen"
component = DirectoryCleaner {
directory = "${runtimeProject}/model/generated"
component = DirectoryCleaner {
directory = "${runtimeProject}.ui/src-gen"
component = DirectoryCleaner {
directory = "${runtimeProject}.tests/src-gen"
component = Generator {
pathRtProject = runtimeProject
pathUiProject = "${runtimeProject}.ui"
pathTestProject = "${runtimeProject}.tests"
projectNameRt = projectName
projectNameUi = "${projectName}.ui"
encoding = encoding
language = auto-inject {
uri = grammarURI
// Java API to access grammar elements (required by several other fragments)
fragment = grammarAccess.GrammarAccessFragment auto-inject {}
// provides a compare view
fragment = compare.CompareFragment auto-inject {}
component = ParseXextModel{
//Load the xtext model again and keep the reference of the inmem model
component = CompareModel {
//Implement this using EMF Comapre to see the differnces between 2 models
}

No original with before and after

PSE 11 on a mac. Before and after only showing the most recently edited version of my work. Not the original photo. Help

Sorry, but I'm still not sure I see what the problem is. When you enter QF or Guided, you will see the condition of your photo at that moment. If you've done editing in expert mode, for example--say you used Correct Color Cast--you'll see your photo just as it is at this moment, with the color cast corrected. Are you saying that when you make a change in quick fix, the before photo is changing to show what you did so that it looks just like the After view? If so, quit the editor and then restart it while holding down command+shift+option. Keep the keys down till you see a window asking if you want to delete the settings file. You do.
Or do you mean that in a previous editing session you had edited a photo and saved the changes, but now you want to go back to the original as your starting point. If the last, if you use organizer, go there and expand the version set and choose the original to send for editing. If you're using iphoto, you may need to right-click the photo and choose Revert to get back to your original again.

I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

Hi Crushed,
Numbers doesn't have pages. It has a canvas that holds objects such as tables and charts.
Drag the objects from the bottom of the canvas onto the white space above. That will reduce the number of "pages" (sheets of paper) that will print.
Regards,
Ian.

My ipod touch is stuck on the apple logo and after a while a white screen comes up and it restarts and the same thing all over agan. this happened to me before and after a while it turns on but why does it keep on doing this?

my ipod touch is stuck on the apple logo and after a while a white screen comes up and it restarts and the same thing all over agan. this happened to me before and after a while it turns on but why does it keep on doing this?

Try connecting the iPod Touch to your computer and restore it. http://support.apple.com/kb/HT1414

How do I add a before and after transition to a standalone clip in the second or other than primary stack?

New to FCPX on a project this weekend. I have gotten reasonably comfortable with the basic features but one thing that I CANNOT figure out, is how (what used to be) selecting a track in the timeline to activate it to apply a transition. I need to select a video clip which stands alone in the stack which is positioned above the primary track and add a blend transition before and after the clip. I have set the opacity to blend with the images in the primary track below but the beginning and end of the clip in the second stack do not fall at the transition points in the lower track which should not matter anyway. I can’t find it in Help or the third party tutorials that I purchased and completed. Thanks for your help!

Tom gave you the answer. As a follow-on you can then use the Cross Dissolve transition on your newly converted connected clip. This transition will allow it to dissolve smoothly into the video below it. Note that the Fade to Black transition will take both that clip and the video below it to black which would probably be undesirable. Use Cross Dissolve instead. Best wishes.
stephen

GREP: How can I place a (for example) "*" before and after bold text with GREP?

Hi there.
I have a string of text as such:
I want to use GREP to insert a "*" (asterisk) before and after each bold part. Can I do that with GREP?
(if asterisk is a problem, I can use a different character)
Any help would be appreciated.

Hi Schmaltzkopf,
try this:
Have fun

Hi, Just switched from CS6 to PS CC. I am used to using ACR in CS6 with it's preview checkbox in the upper right-hand corner. I do not see that checkbox in PS CC. I see that they have added side-by-side, right and left and top and bottom before and after

Hi,
Just switched from CS6 to PS CC. I am very comfortable using ACR in previous versions. I liked to use the preview checkbox located in the upper right-hand corner to see before and afters. That checkbox is no longer in my version of PS CC. I see that they have side-by-side, top and bottom and right and left before and after options in the lower right-hand corner in this version. Is there anyway to get that legacy preview checkbox back so that I can use it?

Hi Warunicorn,
Thank you very much. I just could not find it on my own. I will have more questions as I get into it.
Jim

Data Loading(Before and After Image)

I heard that a datasource which has both "Before and After Image " ,then the data can be sent directly to the infocube or from the DSO to the Infocube but where as
If a datasource supports after image then first it has to be loaded to the DSO and then to the Infocube ,
My question is how to know the image types of the datasource ?

Hi Ravi,
Check in ROOSOURCE tables in ECC. You can find the behvariaour options in DELTA field, so based on this table we can say will it support Cube/ODS.
    Delta Only Via Full Upload (ODS or InfoPackage Selection)
A    ALE Update Pointer (Master Data)
ABR    Complete Delta with Deletion Flag Via Delta Queue(Cube-Comp)
ABR1    Like Method 'ABR' But Serialization Only by Requests
ADD    Additive Extraction Via Extracto (e.g. LIS Info Structures)
ADDD    Like 'ADD' But Via Delta Queue (Cube-Compatible)
AIE    After-Images Via Extractor (FI-GL/AP/AR)
AIED    After-Images with Deletion Flag Via Extractor (FI-GL/AP/AR)
AIM    After-Images Via Delta Queue (e.g. FI-AP/AR)
AIMD    After-Images with Deletion Flag Via Delta Queue (e.g. BtB)
CUBE    InfoCube Extraction
D    Unspecific Delta Via Delta Queue (Not ODS-Compatible)
E    Unspecific Delta Via Extractor (Not ODS-Compatible)
FIL0    Delta Via File Import with After-Images
FIL1    Delta Via File Import with Delta Images
NEWD    Only New Records (Inserts) Via Delta Queue (Cube-Compatible)
NEWE    Only New Records (Inserts) Via Extractor (Cube-Compatible)
O
ODS    ODS Extraction
X    Delta Unspecified (Do Not Use!)

Before and After in Elements Editor

Similar Messages

Maybe you are looking for