Before I upgraded to Yosemite 10.10.3 my photos taken on my phone transferred to my iPad and iMac. Now nothing automatically transfers. Why

Before I upgraded to Yosemite 10.10.3 my photos taken on my phone transferred to my iPad and iMac. Now nothing automatically transfers. Why?

This may be a solution. i take it your photos were in iPhoto. If so they will still be in your iPhoto library.
This library should be in your pictures folder, see below.
If you control-click on the library and from the drop down menu choose open, hopefully iPhoto will open and you will see your photos.
This worked for me, so I hope it works for you.

Similar Messages

Ever since i "upgraded" to yosemite i can't run illustrator (i'm getting a plugin error "Photoshopimport.aip" and "PhotoshopExport.aip" message... i've tried to get support (no longer available for cs4 design premium!!!... i've uninstalled and reinstalled

ever since i "upgraded" to yosemite i can't run illustrator (i'm getting a plugin error "Photoshopimport.aip" and "PhotoshopExport.aip" message... i've tried to get support (no longer available for cs4 design premium!!!... i've uninstalled and reinstalled... the problem persists... can anyone at adobe provide guidance, orientation, help?... thank you kindly,
bob kincey
[email protected]
[email protected]

Some people have reported success with opening Photoshop before opening AI. Some how the aips are registered there and are then available to work in AI.

Just upgraded to Yosemite 10.10.3 including Photos 1.0 which is not syncing with Adobe Photoshop Elements 12 Editor (already installed)....any ideas?

Just upgraded to Yosemite 10.10.3 including Photos 1.0 which is not syncing with Adobe Photoshop Elements 12 Editor (already installed)....any ideas?

....partially resolved, in case anyone else with sim prob.....
....with Photoshop open you click "Open" (top left) and 'Finder' opens up in the window with 'Photos' listed.
Select which pic you want to edit (duplicates must be created first in 'Photos") and it opens in Photoshop Editor
It's all a bit messy but seems to work.

I recently upgraded to Mt. Lion and am downloading my iphone, ipad, and iMac in icloud. Can not check Photo stream in iMac. Do my iphone photos sync to iMac

I recently upgraded to Mt.Lion 10.8.3. Am backing up icloud in iphone, ipad, and imac. In Imac, cannot check "photo stream". How do I see my photos from iphone on my imac? and should I backup in imac icloud storage?
Thank you.

Log into iCloud (system preferences), launch iPhoto and Turn on PhotoStream (iPhoto preferences) and look under PhotoStream in the source list in iPhoto - if you want, turn on auto import and / or auto upload in the iPhoto preferences
instructions for set up are here
FAQs and links to trouble shooting hints are here
LN

HT4527 My computer had to be restored before i could back up my music, is there a way i can get it off my ipad and back into my itunes on my computer?

My computer had to be restored before i could back up my music, is there a way I can get it off my iPad and onto my iTunes on my computer?

Hello Creekside1,
Thank you for using Apple Support Communities!
You can trasnfer your purchases from the iPod to the computer with this article:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/HT1848
You can also download your iTunes purchases to your iTunes library with this article:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Take care,
Sterling

Do i have to disconnect my time machine backup drive before I upgrade to Yosemite from mavericks

I am considering upgrading from mavericks to yosemite. Do I need to disconnect my time machine external backup disc drive before I upgrade.

Thanks,
I was concerned that if the upgrade went wrong for any reason, it may corrupt the back up drive as well as the hard drive and I would somehow loose the ability to recover my files.

Just upgraded to Yosemite 10.10.3 including Photos 1.0 which is not syncing with Adobe Photoshop Elements 12 Editor (already installed)....any ideas? Using MacBook Pro (13-inch Mid 2012)

Just upgraded my MacBook Pro (13-inch Mid 2012) to Yosemite 10.10.3 including Photos 1.0 which is not syncing with Adobe Photoshop Elements 12 Editor (already installed and prev ok with iPhoto)....any ideas please?

In iPhoto it was possible to go into the iPhoto prefs and set up Elements as an external editor. After using “Edit in” the image was saved back to the iPhoto library. Photos for OSX is very new, so I’m not sure whether that is possible with the new app. Have you looked for the prefs/settings? You could ask a question on the Apple forum:
https://support.apple.com/en-us/HT204655

My repaired macbook now has Yosemite. I have my photo library on an external drive loaded with Aperture 2. Now unable to do anything.

My "photo management macbook" crashed and when it was repaired it was upgraded to Yosemite. This macbook is used exclusively for photos using Aperture 2 (I also have a new Pro retina and an older macbook as well, with Yosemite and Lion loaded respectively). I have my photo library on an external drive and it was loaded using Aperture 2. Now I cannot use Aperture, cannot see photos, cannot upgrade to Aperture 3.6 and so cannot migrate photos to another software package, which I am going to have to do this year sometime.
What can I do to get Aperture working and migrate my photos?

On Yosemite you can only run Aperture 3.6, but that will not run on Lion.
If you want to get Aperture running on your photo management macbook, restore it to the previous system from the last backup you made before the crash occurred, if you have a full Time Machine backup. If you want to keep the Mac on Yosemite, try to restore the older system to an external drive and boot the Mac from that drive, when you want to work with Aperture 2.
Otherwise your only option would be to buy the upgrade to Aperture 3.6.

Before I upgrade to Yosemite, can an "expert" please assist

Hi all,
I have been putting off updating to Yosemite after reading about lots of bugs & issues people have had.
Now deciding that I would like to take the plunge, I am still worried that if something goes wrong I won't have a clue what to do.
Ive just run an Etre check and would like one of you very clever & knowledgeable people to take a look and let me know if I have any problems on my 2011 iMac, running OS X 10.8.5.
Thanks.
Problem description:
Just a check on health of my iMac
EtreCheck version: 2.1.8 (121)
Report generated 4 April 2015 14:53:02 BST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    iMac (21.5-inch, Mid 2010) (Technical Specifications)
    iMac - model: iMac11,2
    1 3.06 GHz Intel Core i3 CPU: 2-core
    4 GB RAM
        BANK 0/DIMM0
            Empty
        BANK 1/DIMM0
            Empty
        BANK 0/DIMM1
            2 GB DDR3 1333 MHz ok
        BANK 1/DIMM1
            2 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: Unknown
Video Information: ℹ️
    ATI Radeon HD 4670 - VRAM: 256 MB
        iMac 1920 x 1080
System Software: ℹ️
    OS X 10.8.5 (12F2501) - Time since boot: 0:45:17
Disk Information: ℹ️
    WDC WD5000AAKS-40V6A0 disk0 : (500.11 GB)
        disk0s1 (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 499.25 GB (230.42 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    OPTIARC DVD RW AD-5680H
USB Information: ℹ️
    Apple, Inc. Keyboard Hub
        Apple, Inc Apple Keyboard
    Western Digital My Book 1230 2 TB
        disk1s1 (disk1s1) <not mounted> : 210 MB
        Jane's WD Drive (disk1s2) /Volumes/Jane's WD Drive : 2.00 TB (1.71 TB free)
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Internal Memory Card Reader
    EPSON EPSON Epson Stylus SX218 Series
    Apple Inc. Built-in iSight
    Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /System/Library/Extensions
    [not loaded]    com.seagate.driver.PowSecDriverCore (5.0.1) [Click for support]
        /System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
    [not loaded]    com.seagate.driver.PowSecLeafDriver_10_4 (5.0.1) [Click for support]
    [not loaded]    com.seagate.driver.PowSecLeafDriver_10_5 (5.0.1) [Click for support]
    [not loaded]    com.seagate.driver.SeagateDriveIcons (5.0.1) [Click for support]
Launch Agents: ℹ️
    [running]    com.seagate.SeagateStorageGauge.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [running]    com.memeo.Memeod.plist [Click for support]
User Login Items: ℹ️
    Garmin Express Service    Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
    iTunesHelper    Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    MemeoAgent    Application (/Library/Application Support/Memeo/Memeo Backup/Agents/MemeoAgent.app)
Internet Plug-ins: ℹ️
    JavaAppletPlugin: Version: 14.5.0 - SDK 10.8 Check version
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.1
    Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    OfficeLiveBrowserPlugin: Version: 12.3.6 [Click for support]
    GarminGpsControl: Version: 4.1.0.0 Release - SDK 10.7 [Click for support]
    AmazonMP3DownloaderPlugin101749: Version: Unknown
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
Safari Extensions: ℹ️
    donation reminder
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: OFF
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 499.25 GB Disk used: 268.83 GB
    Destinations:
        Jane's WD Drive [Local]
        Total size: 2.00 TB
        Total number of backups: 71
        Oldest backup: 2014-03-29 21:17:49 +0000
        Last backup: 2015-04-04 13:11:49 +0000
        Size of backup disk: Excellent
            Backup size 2.00 TB > (Disk size 499.25 GB X 3)
Top Processes by CPU: ℹ️
         3%    WindowServer
         1%    iTunes
         1%    coreaudiod
         0%    fontd
         0%    NotificationCenter
Top Processes by Memory: ℹ️
    318 MB    App Store
    288 MB    WebProcess
    228 MB    iTunes
    155 MB    Safari
    73 MB    mds
Virtual Memory Information: ℹ️
    1.46 GB    Free RAM
    1.85 GB    Active RAM
    407 MB    Inactive RAM
    578 MB    Wired RAM
    394 MB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Apr 4, 2015, 02:06:16 PM    Self test - passed

Check the OWC site. The 2 places I’ve seen recommended most to buy reliable RAM are below. I have purchased RAM several times from Other World Computing and have always been very satisfied with the product and service. They have on-line instructions on how to replace the RAM. OWC has also tested RAM above what Apple states is the maximum. I now have 6GB installed on a early 2008 iMac supposedly limited to 4 GB and noticed an improvement.
Crucial
Other World Computing
Do a backup, preferable 2 separate ones on 2 drives.
One option is to create a new partition (~30- 50 GB), install the new OS, and ‘test drive’ it. If you like/don’t like it it, you can then remove the partition. Do a backup before you do anything. By doing this, if you don’t like it you won’t have to go though the revert process.
Check to make sure your applications are compatible.
Application Compatibility
Applications Compatibility (2)

Upgraded to iTunes 10.1 and now nothing!! WHY?????

After upgrading to 10.1, desktop icon does nothing. Tried to repair upgrade/install, still nothing. Tried to uninstall, re-install, still a big zero. So, thinking I had a bug or virus, I initiated a run of Advanced SystemCare Free 3.7.3 to clean up things a bit. Now iTunes says it can't open because of some compatibility issue with my previous iTunes music exe.??? I had a lot on my iPod, but not ALL my music. By uninstalling and cleaning and such, did I lose all my music in my library on iTunes? Would it help to complete a System Restore to bring it back? Or am I out of luck?? And no, I have not recently backed up my library. I know....big dummy.

Hello i5yong
Pick out one of the articles below for the type of computer you have to troubleshoot and resolve the issue of not seeing your iPhone.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Regards,
-Norm G.

Since upgrading my computer last week i cannot send emails using talktalk, i can send via ipad and phone so not the server

Since upgrading my system i have been unable to send emails using talktalk although i can receive them i have no problem sending them via ipad or phone. can any one help please

Open Mail -> Preferences -> Accounts. Select the TalkTalk account and then the 'Account Information' tab. Drop down the 'Outgoing Mail Server (SMTP)' menu and select 'Edit SMTP Server List'. Ensure that 'Server Name' under 'Account Information' is set to "smtp.talktalk.net". You may also need to configure settings under the 'Advanced' tab.
More info here:
http://help.talktalk.co.uk/app/answers/detail/a_id/1668/~/what-are-talktalk's-em ail-settings%3F#TalkTalk

Airdrop,,Using,Phone,5's,,8.1.1,,and,Mac,Book,pro,early,2011,,OS,X,Yosemite:,try ing,to,send,photo,via,airdrop,FROM,phone,to,computer,,but,airdrop,does,not,find, computer,even,3,inches,away;,WWII,and,bluetooth,are,enabled.,Solution?

Airdrop solution needed! Using iPhone 5s, 8.1.1, and MacBook Pro early 2011, OS X Yosemite 10.10.1, cannot get iPhone to pickup airdrop signal for computer to send photos from iPhone to computer. WiFi and Bluetooth are enabled.

adamboettiger wrote:
Sophos and MacKeeper
There are many reported problems with both these programs.
Run through this list of fixes in order, will tune you right up.
They are in order for a reason.
..Step by Step to fix your Mac

HT1414 Can you restore photos taken on new phone before I restored via iTunes?

Hi
Just been in the Apple store as my phone was faulty and had an exchange for a new one - took a few photos over lunch then got home and restored my back-up - but didnt realise I would lose the photos taken at lunch - is there any way I can find them or restore? No, no other back-up was done, just didnt think the photos would be erased/ disappear! Doh!
Thanks

No. They're gone.

Mac Pro's (early 2008) Back up plan towards a possible OS upgrade to Yosemite

Hello All. Here’re some of the details/background info…hopefully all this won’t be so annoying. Your feedback is highly appreciated. Thanks a bunch!
I have 2 Mac Pro’s (Early 2008) 3,1 both running SL (10.6.8). One I have been using non-stop throughout these years, I’d call it MP 2008 (A). The other one once belong to a friend who actually bought it around the same time I purchased mine, only that he didn’t use it much and just recently decided to sell it to me. I’d call it MP 2008 (B). Both MP’s are very light on data on the main, boot HD, just applications,… as everything I work on is kept in external hard drives and backups. I do not usually download any third party stuff (only when strictly necessary for my work) and essentially it’s all about the software and applications (Adobe CS3 and LR 0.2) I need to do my pretty basic work.
All pretty old stuff by now, I know.
Following a couple of mishaps and lots of good advice in these forums, (thanks to the hatter, etc.) I went ahead and bought 16GB of RAM for both, and an NVidia Graphics Card (all from Amazon.com) for my MP 2008 (A) to replace it after it went bad, and everything has been working just fine. As you can tell, I have not tried to upgrade much, but rather keep everything stock and running as smoothly as possible.
I am afraid the next big, important thing I MUST do is back up my almost 6 years-old HD (I know, it should’ve been done long ago). Frankly, I have never done it before because I didn’t even know that could be possible…I learned about it right here, in this forum. In this sense, much I have also read (here) about the SSD option, and about how great of an upgrade that could be too, but I have decided to stick to the regular 3.5” for now. (I just recently found out those SSD even existed!). Hopefully, once I gain a bit of confidence on how this works I’ll jump into the SSD option, cards, etc. So, I purchased 2X 3.5” SATA III HD’s to try cloning my MP 2008 (A) boot, main HD and get this process over with.
QUESTIONS
QUESTION #1: After installing the internal hard drives in bays 2 and 3: Do I have to specifically format them in order to turn them into bootable copies? If so, how do I do that? I have read about using ‘Disk Utility’ to format external hard drives for this purpose but I don’t know if that would apply for internal hard drives as well.
QUESTION #2: What are the settings/features you all recommend I should select/or deselect on CCC so I can have exact, bootable copies of my original HD? No fancy stuff, advanced options, etc…just what I need to have good enough copies that just work.
QUESTION #3: How do I test them?
I noticed that under “System Preferences/System/Startup Disk” I can select the drive/system I want to use to start up my computer from. My question is:
QUESTION #4: Can I permanently choose any of the Mac Pro four (4) bays/bootable hard drives as the main drive/system for startup? I always thought I could only be done from the original, ‘main’ bootable drive in bay 1.
QUESTION #5: What if the copy fails? How do I go back to the HD that works or to the next copy, for that matter?
About my MP 2008 (B): In an effort to sell me his MP, my friend (as knowledgeable as I am) messed up something that delays the start up a lot. I noticed that in the finder, the applications appear double, etc., so I am not so happy with it. Even though the little house icon has his name in the finder, he was able to make me the Administrator for the machine (I don’t know how). But again, it starts up to the typical chime, then a gray screen for quite a loooong while, then the apple logo, then the loading animation…and theeennnn it starts…and no known issues from there. In other words, I am sure he messed something up there while transferring this machine to me and now its startup is so delayed.
QUESTION #6: Let’s say that both the bootable HD copies I created on my MP 2008 (A) work fine: Can I take one out and install it in my MP 2008 (B) and eventually turn it into my startup drive and work from there too? Will this eventually lead to conflicting stuff? (Two machines, same identical cloned start up drive??).
Eventually, the plan is that I learn how to do all this so I can move on and upgrade with a clean install of Yosemite pretty soon.
Hopefully, both my Mac Pro’s 2008 A and B will last me a bit more and I can get to squeeze a few more seasons from them. They are awesome machines!
As you can tell, in theory I might have a little bit of a clue, but all is in the details. If you don’t mind, please shed some light on this process I am about to begin…thanks a bunch!

Thank you!
Kappy Nov 24, 2014 3:01 PM
Re: Mac Pro's (early 2008) Back up plan towards a possible OS upgrade to Yosemite in response to Juan Huerta
All new drives need to be partitioned GUID and formatted Mac OS Extended, Journaled before they can be used.
OK, is that an option I'll be prompted to by the OS or do I have to "tell" that to...Disk Utilities (?)
If cloning is your purpose then use Disk Utility's Restore option. It will clone the drives and their Recovery HD partitions automatically.
I didn't know that Disk Utility had an option for cloning a bootable drive...is it better than CCC? (I have used neither one) I really would like to save $40 and avoid downloading additional software/applications...please if you don't mind...what option would that be once I click on "Disk Utility"? If you know of a good link or reliable article on the topic that will work for me too.
Test a clone be trying to boot the computer from it.
Any bootable drive in any bay can be used to boot the computer. Use Startup Drive preferences to set the desired boot volume.
Erase the target and try again.
But if the computer fails to start because I didn't create a good copy, how do I go back? Keyboard shortcuts? I keep reading that a wired keyboard must be used...and that's scary. If that's true, could I hook up any of my Windows based keyboards via USB?
Erase the drive and install OS X. You cannot use any software installed by the prior owner that was purchased via the App Store including OS X. You must start from scratch. (this actually is 5B rather than item 6.)
Well, he created an Admin account for me and I have been handling updates and everything with the new password he created for me. I wonder if I could access the Apple Store with my ID though...it's all under my name in that computer though, so I figure that at the Apple Store I'd just enter my ID...I guess, I have not tried that yet
Yes.

Upgraded to Yosemite 10.10 now magnetic tool does not work in photoshop CS6 also using intuos 5 tablet.

The lasso tools worked great before i upgraded to Yosemite.. Some one please help.

I have the same problems. There are not answers anywhere.

Before I upgraded to Yosemite 10.10.3 my photos taken on my phone transferred to my iPad and iMac. Now nothing automatically transfers. Why

Similar Messages

Maybe you are looking for