Beginning Dialog Programming

Dear Friends,
I want to begin with dialog programming in ABAP. So, please tell me how to start & where to look out for the good examples. Please tell me about the examples in IDES also.
Bye,
Nishant

Nishant,
I found the book 'ABAP/4 Programming the SAP R/3 System' critical to my success when I started learning Dialog Programming 2 years ago.
This book covers other issues as well, but there are a 120 pages devoted to the basics of Dialog Programming.
It also covers ABAP Objects, reports, interactive reports, and building all types of dictionary objects.
http://tinyurl.com/9a6t4
Make sure to get 2nd Edition.
Hope this helps,
Brett

Similar Messages

User Authorisations in Dialog Programming.

Hi Friends,
I have a small requirement, I want to create user authorisations in dialog programming.
Actually client requirement is he want to enter absence details of each and every branch.
For that i have created a cusom table and i also i have developed a dialog program inorder to update the details
and to retrive all the data i have created a report program also.
Now the client requirement is he want user authorisations while updating the data through dialog programming, that means if a user loging in that particular branch he want to enter the absence details pertaining to that branch only, when he tries to enter the details of other employee pertaining to another branch an error should be raised.
Actually in the client place they are using authrisation object as 'Z_WERKS'. The basis person has created this and provided for me.
Actually i have created an Authority check in module pool program.Here iam attaching my prog,
Pls provide me the sample code if at all available.
*& Include ZEMPTOP Module pool
PROGRAM ZEMP.
TABLES : ZABS,PA0001.
DATA : WA_PA0001 LIKE PA0001,
 V_ANS.
DATA: BEGIN OF Z_WERKS OCCURS 0,
 PERSA LIKE T500P-PERSA,
 NAME1 LIKE T500P-NAME1,
 END OF Z_WERKS.
*& Include ZEMPI01
*& Module USER_COMMAND_0100 INPUT
 text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'DISP'.
SELECT SINGLE * FROM ZABS WHERE PERNR = ZABS-PERNR.
IF SY-DBCNT <> 0.
*MESSAGE I000(Z00) WITH 'Details of' ZABS-PERNR .
else.
MESSAGE I000(Z00) WITH 'No Details Available to Display'.
ENDIF.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
LEAVE TO SCREEN 0.
WHEN 'CLS'.
CLEAR ZABS.
WHEN 'INS'.
INSERT ZABS .
ZABS-ABWTG = ZABS-ENDDA - ZABS-BEGDA + 1.
IF SY-DBCNT <> 0.
MESSAGE I000(Z00) WITH 'Personnel No' ZABS-PERNR
'inserted successfully'.
ENDIF.
CLEAR ZABS.
WHEN 'MOD'.
UPDATE ZABS.
ZABS-ABWTG = ZABS-ENDDA - ZABS-BEGDA + 1.
IF SY-DBCNT <> 0.
MESSAGE I000(Z00) WITH 'Personnel No' ZABS-PERNR
'Modified Successfully'.
ENDIF.
CLEAR ZABS.
*WHEN 'DEL'.
*CALL FUNCTION 'POPUP_TO_CONFIRM_LOSS_OF_DATA'
EXPORTING
 TEXTLINE1 = 'ARE YOU SURE'
 TEXTLINE2 = 'YOU WANT TO DELETE'
 TITEL = 'CONFIRMATION'
 START_COLUMN = 25
 START_ROW = 6
 DEFAULTOPTION = 'N'
IMPORTING
 ANSWER = V_ANS.
*IF V_ANS = 'J'.
*DELETE ZABS.
*IF SY-DBCNT <> 0.
*MESSAGE I000(Z00) WITH 'Personnel No' ZABS-PERNR
*'Deleted Successuflly'.
*ELSE.
*MESSAGE I000(Z00) with 'No Record to Delete'.
ENDIF.
*ENDIF.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module GET_REC INPUT
 text
MODULE GET_REC INPUT.
SELECT SINGLE * FROM PA0001 INTO WA_PA0001
 WHERE PERNR = ZABS-PERNR.
MOVE: WA_PA0001-PERNR TO ZABS-PERNR,
 WA_PA0001-ENAME TO ZABS-ENAME,
 WA_PA0001-GSBER TO ZABS-GSBER,
 WA_PA0001-WERKS TO ZABS-WERKS.
ZABS-ABWTG = ZABS-ENDDA - ZABS-BEGDA + 1.
ENDMODULE. " GET_REC INPUT
*& Module CHECK_AUTH_WERKS INPUT
 text
MODULE CHECK_AUTH_WERKS INPUT.
*SELECT PERSA INTO TABLE _WERKS FROM T500P
 WHERE PERSA = ZABS-WERKS.
AUTHORITY-CHECK OBJECT 'Z_WERKS'
ID 'PERSA' FIELD Z_WERKS-PERSA.

You need to test the sy-subrc after the authority check - that will indicate whether the user has the authorisation or not.. you also often include the activity being tested e.g. generally 03 = Display, 02 = Update etc
AUTHORITY-CHECK OBJECT 'S_TRVL_BKS'
ID 'ACTVT' FIELD '03'
ID 'CUSTTYPE' FIELD 'B'.
IF not SY-SUBRC is initial.
MESSAGE E... "put your exception here...
ENDIF.
see [Programming Authorization Checks |http://help.sap.com/saphelp_nw04/helpdata/en/52/6712ac439b11d1896f0000e8322d00/content.htm] for more info.
Jonathan

Select-Option in Dialog programming

Hi Experts,
Can we use select-options in Dialog programming?
If yes, Please help me, how to do that?
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Jun 12, 2008 12:27 PM

Hi Asrar,
Definitely you can use select-options in dialog programming.
You can do this using Subscreen.
define this scubscreen in top include.
selection-screen : begin of screen 100 as subscreen.
select-option : kunnr for kna1-kunnr.
selection-screen : end of screen 100.
in screen 200 where this selection screen appears, create a subscreen area 'SSA'.
Process on output. "200 screen.
call subscreen SSA including sy-repid '100'.
other modules
Process on input. "200 screen.
call subscreen SSA.
other modules
now you can access kunnr like other screen 200 objects.
<REMOVED BY MODERATOR>
Regards
Megha
Edited by: Alvaro Tejada Galindo on Jun 12, 2008 12:27 PM

Select option in Dialog program screen

Hi friends,
do we have any way to get a select option displayed in dialog programming ?
or
create a screen field with the properties of a select option in dialog screen ?
or
any standard function module to support this scenario ?
Thanks and Regards
Sakthi.

Hi,
i don't know you checked it or not, but i am able to do it, i send the screen shot also to you check it..
it is possible,with some coding also check it once...
REPORT ZTEST_SCREEN .
DATA : BEGIN OF IT_DYNPFIELDS OCCURS 3.
 INCLUDE STRUCTURE DYNPREAD.
DATA : END OF IT_DYNPFIELDS.
DATA: TEST(10) TYPE C.
RANGES: R_UNAME FOR SY-UNAME.
DATA: V_USERNAME LIKE SY-UNAME.
DATA : V_PROG LIKE D020S-PROG VALUE 'ZTEST_SCREEN',
 V_DNUM LIKE D020S-DNUM VALUE '0100'.
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
* text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'TEST'.
* SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
 WHEN 'BACK'.
 LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module GET_CURSOR_USERNAME INPUT
* text
MODULE GET_CURSOR_USERNAME INPUT.
REFRESH IT_DYNPFIELDS.
CLEAR IT_DYNPFIELDS.
MOVE 'V_USERNAME' TO IT_DYNPFIELDS-FIELDNAME.
APPEND IT_DYNPFIELDS.
CLEAR IT_DYNPFIELDS.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 DYNAME = V_PROG
 DYNUMB = V_DNUM
 TRANSLATE_TO_UPPER = 'X'
 TABLES
 DYNPFIELDS = IT_DYNPFIELDS
 EXCEPTIONS
 INVALID_ABAPWORKAREA = 1
 INVALID_DYNPROFIELD = 2
 INVALID_DYNPRONAME = 3
 INVALID_DYNPRONUMMER = 4
 INVALID_REQUEST = 5
 NO_FIELDDESCRIPTION = 6
 INVALID_PARAMETER = 7
 UNDEFIND_ERROR = 8
 DOUBLE_CONVERSION = 9
 STEPL_NOT_FOUND = 10
 OTHERS = 11.
IF SY-SUBRC = 0.
 READ TABLE IT_DYNPFIELDS WITH KEY FIELDNAME = 'V_USERNAME'.
 IF SY-SUBRC = 0.
 V_USERNAME = IT_DYNPFIELDS-FIELDVALUE.
 ENDIF.
ENDIF.
PERFORM GET_MULTIPLE.
ENDMODULE. " GET_CURSOR_USERNAME INPUT
*& Form GET_MULTIPLE
* text
* --> p1 text
* <-- p2 text
FORM GET_MULTIPLE .
* Dynamically holding Field name
FIELD-SYMBOLS: <FST> TYPE STANDARD TABLE.
IF R_UNAME[] IS INITIAL.
 IF NOT V_USERNAME IS INITIAL.
 R_UNAME-SIGN = 'I'.
 R_UNAME-OPTION = 'EQ'.
 R_UNAME-LOW = V_USERNAME.
 APPEND R_UNAME.
 CLEAR R_UNAME.
 ENDIF.
ENDIF.
ASSIGN R_UNAME[] TO <FST>.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
 EXPORTING
 TITLE = 'Select Multiple Value'(059)
 TEXT = 'Finish Group'(058)
 SIGNED = 'X'
 LOWER_CASE = ' '
 NO_INTERVAL_CHECK = 'X'
 JUST_DISPLAY = ' '
 JUST_INCL = 'X'
 TABLES
 RANGE = <FST>
 EXCEPTIONS
 NO_RANGE_TAB = 1
 CANCELLED = 2
 INTERNAL_ERROR = 3
 OTHERS = 4.
IF SY-SUBRC = 0.
 READ TABLE R_UNAME INDEX 1.
 IF SY-SUBRC = 0.
 V_USERNAME = R_UNAME-LOW.
 ENDIF.
ENDIF.
ENDFORM. " GET_MULTIPLE
Flow loogic....
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
PROCESS ON VALUE-REQUEST.
*- To capture the cursor and for f4
FIELD V_USERNAME MODULE GET_CURSOR_USERNAME.
in screen i have one field v_username
for that field do this
double click on field which you want to make it as select option, it will display the attributes screen, in that click on program attributes button , now go to poss. entries in the dropdown choose 1 show at selection.
Regards
vijay

Select-Options in dialog program

Hi there,
I'm using a selection-screen in a dialog program, I declared it in the TOP.
Selection-screens
SELECTION-SCREEN BEGIN OF SCREEN 101 AS SUBSCREEN.
parameters: p_lifnr type lfa1-lifnr obligatory ,
p_werks type t001w-werks obligatory .
SELECT-OPTIONS:
s_licha FOR zbrtconsig-licha.
SELECTION-SCREEN END OF SCREEN 101.
I have to use the event at selection-screen on value-request for s_licha-low, and I need the values from the fields p_lifnr and p_werks. the problem is:
If I only fill the fields p_lifnr, p_werks and click on F4 for s_licha, the values of p_lifnr and p_werks are not updated, they are empty. Only wether I do an Enter this fields is updated.
Thanks,
Alexandre Nogueira

Hi,
i am not clear about your problem, please expalin it clearly.
use FM : DYNP_VALUES_UPDATE to update screen fields.
use FM : DYNP_VALUES_READ to read screen fields.
use SET /GET Parameter id's to set parameters
this FM will update the screen fields before to PBO event.
check this link for sample code :
Re: Issue Related to Module pool
Regards
Appana

Search help in dialog program

Hi all,
Fora search help in dialog program.
I HAVE TO GET SEARCH FOR A FIELD ZID ON APARTICULAR SCREEN BASED ON DATA, MODIFIED BY AND A PLANT..
I HAVE A RECORD IN ONE MY ZTABLE.
I HAVE TO GET THAT BY SEVERAL SEARCH PARAMETERS SAY BY DATE , MODIFIED BY,PLANT ETC.
each user has been assigned a plant , so in search he has to get records belonging to that plant.
so i cannot include plant in my search help, because user may type in other plant.
so i tried two ways
1) i created a search help in se11 including the plant field again the problem arises if the user types a different plant.
so i want to know whether we can apassa value to plant field in search help(i.e the plant assigned to the user),
i have this kind of thing in some standard t -code i.e especially for searching material , the plant field in search help was filled by one plant.
this should be one of the solution
2)I tried to write a code in pov of program code.
this is how my code looks.
DATA : BEGIN OF ITAB OCCURS 0.
 INCLUDE STRUCTURE ZXXX.
DATA : END OF ITAB.
ITAB HAS FIELDS ID, DATE , MODIFIEDBY , PLANT.
USER_PLANT = 'ABC'.
SELECT * FROM ZXXX INTO TABLE ITAB WHERE PLANT = USER_PLANT.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
 RETFIELD = 'ZID'
PVALKEY = ' '
DYNPPROG = ' '
DYNPNR = ' '
DYNPROFIELD = ' '
STEPL = 0
 WINDOW_TITLE = 'TEST'
VALUE = ' '
 VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
TABLES
 VALUE_TAB = ITAB
FIELD_TAB =
 RETURN_TAB = IT_RETURN4
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
if sy-subrc = 0.
 clear itab.
 read table it_return4 index 1.
 ZXXX-ZID = it_return4-fieldval.
endif.
THIS WORKS FINE , BUT HE CANNOT SEARCH BASED ON DATE AND MODIFIEDBY
ALL i want is is get a pop up window and should be able to search based on data and modifiedby for a predifined plant.
I hope iam clear.
Thanks

Hi,
Create a FM with the following code..The interface is defined in the code..
In the Function module top include add the following code.
TYPE-POOLS: shlp, vrm.
IN this code I am deleting the records that are not of the currency USD...
Do the same thing for your requirement...
FUNCTION Y_SEARCH_HELP_EXIT.
""Local interface:
*" TABLES
*" SHLP_TAB TYPE SHLP_DESCR_TAB_T
*" RECORD_TAB STRUCTURE SEAHLPRES
*" CHANGING
*" REFERENCE(SHLP) TYPE SHLP_DESCR_T
*" REFERENCE(CALLCONTROL) LIKE DDSHF4CTRL STRUCTURE DDSHF4CTRL
where z_test is my z table..
DATA: ITAB LIKE Z_TEST OCCURS 0 WITH HEADER LINE.
ITAB[] = RECORD_TAB[].
IF NOT RECORD_TAB[] IS INITIAL.
DELETE ITAB WHERE WAERS <> 'USD'.
RECORD_TAB[] = ITAB[].
ENDIF.
ENDFUNCTION.
Thanks,
Naren

Subscreen in dialog programming

hi
in my dialog programming i am calling a subscreen .
SELECTION-SCREEN BEGIN OF SCREEN 2000 AS SUBSCREEN.
SELECT-OPTIONS: s_lgort FOR mard-lgort NO INTERVALS.
SELECTION-SCREEN END OF SCREEN 2000.
in PBO
CALL SUBSCREEN SUBSCREEN_2000 INCLUDING SY-REPID '2000'.
now my requirement is i want to control the display of the subscreen.
because my screen look like this, after st location lot of spaces then the input box appears.
plant          _______
sales org    _______
division       _______
st location               _________         ->(multple selection)
now i want to display the subscreen equal space to plant sales org etc.
plant          _______
sales org    _______
division       _______
st location _______      ->(multple selection)
How to control the display of the subscreen.
Thanks,
Madhu

Hi madhu,
i think no need to control the display in your subscreen.if you placed the fields in the screen directly from database please check the field length of the label st location, noramally this will take the size of corresponding table field.if you dont want the full size reduce the size of the label in screen painter.
reward if helpful
shibu

Implement F4 Value-Request Functionality in Dialog Programming

Hi. Apologies in advance if this is the wrong forum.
I'm on R/3 4.6c.
What is the best way to implement this:
AT SELECTION-SCREEN ON VALUE-REQUEST FOR xxxx-low.
in a dialog program?
I have my selection screen defined in my TOP include, but since dialog programs don't support report events I am not sure what to do.
Thank you for any assistance you could provide.
Best Regards,
Brett

make a new include like
include progname_screen_1001. at the top of your program.
goto include.
write the code below in your include.
SELECTION-SCREEN BEGIN OF SCREEN 1001.
write here your selection options and parameters.
also but here the code you want:
AT SELECTION-SCREEN ON VALUE-REQUEST FOR xxxx-low.
SELECTION-SCREEN END OF SCREEN 1001.
call the screen from anywhere:
call screen 1001.
if you want the selection-screen as subscreen than write
SELECTION-SCREEN BEGIN OF SCREEN 1001 as subscreen .
write here your selection options and parameters.
also but here the code you want:
AT SELECTION-SCREEN ON VALUE-REQUEST FOR xxxx-low.
SELECTION-SCREEN END OF SCREEN 1001.
when calling it
write it to PBO of your screen in which you but an subscreen area named subsel.
CALL SUBSCREEN SUBSEL INCLUDING 'PROGRAMNAME' '1001'.

Write the syntax for declaring table control in dialog programming?

1) Write the syntax for declaring table control in dialog programming?
2) Write the syntax to call a selection screen in a modal dialog box?

hi,
check this code for table control.
DIALOG PROGRAMMING
TABLE CONTROL
IN SE51
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
LOOP AT ITVBAK WITH CONTROL TABCTRL. ## TABLE CONTROL NAME
ENDLOOP.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
LOOP AT ITVBAK.
ENDLOOP.
IN PAI FLOW LOGIC
PROGRAM YMODULE_PR4 .
TABLES : KNA1, VBAK.
DATA : BEGIN OF ITVBAK OCCURS 0,
       VBELN LIKE VBAK-VBELN,
       ERDAT LIKE VBAK-ERDAT,
       ERNAM LIKE VBAK-ERNAM,
       NETWR LIKE VBAK-NETWR,
       END OF ITVBAK.
CONTROLS : TABCTRL TYPE TABLEVIEW USING SCREEN '0100'.
TO ACTIVATE SCROLL BAR
*&      Module USER_COMMAND_0100 INPUT
      text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
    WHEN 'EXIT'.
      LEAVE PROGRAM.
    WHEN SPACE.
      SELECT VBELN ERDAT ERNAM NETWR
        FROM VBAK
        INTO TABLE ITVBAK
       WHERE KUNNR = KNA1-KUNNR.
      TABCTRL-LINES = SY-DBCNT.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Module STATUS_0100 OUTPUT
      text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0100 OUTPUT

Selection screen dialog programming

I have used a selection screen in the dialog programming.
I have written some code in the at selection screen to display the output on a table control in another screen 1001.
my problem is that when i try to enter the multiple values for material ,
it goes to the at selection screen and displays the output again.
if i write the code in start of selection instead of at selection screen
it doesnt give any output at all.
how do i correct this error?
SELECTION-SCREEN BEGIN OF SCREEN 2000 .
SELECT-OPTIONS : s_ersda FOR MCHB-ERSDA OBLIGATORY.
SELECT-OPTIONS : s_matnr FOR MCHB-MATNR.
SELECT-OPTIONS : s_matkl FOR MARA-MATKL.
SELECT-OPTIONS : s_ferth FOR MARA-FERTH.
SELECTION-SCREEN END OF SCREEN 2000.
at selection-screen.
statements to fill the output table
screen containing table control
call screen 1001

Friends,
Req for ABAP HR
ROLE: SAP HR ABAP DEVELOPER
Location: TULSA, OK
Duration: 3 + MONTHS
REQUIRED SKILLS: SAP ABAP / Dialog and regular / R/3 and HR / Workflow / smartforms
/ ALV / LSMW for HR and R/3 / Modules - MM , SD , HR, PD , PS
Start Date: 11-12-07
If interested Please send the cvs to [email protected]

Dialog programming - How to place a select-option field in a dialog screen

Hi all,
In Dialog Programming, How to place a select-option field in a dialog screen.
Kindly give me some example code...
Thanks,
Jaffer Ali.S

hi Ali,
U can add select-options in ur module pool by using SELECTION-SCREEN BEGIN OF SCREEN <scrn> AS SUBSCREEN command.
check this link for reference.....
http://help.sap.com/saphelp_47x200/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/frameset.htm
Example Code :
DATA : ok_code TYPE sy-ucomm.
SELECTION-SCREEN BEGIN OF SCREEN 1010 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_rad1 RADIOBUTTON GROUP grp1 DEFAULT 'X',
 p_rad2 RADIOBUTTON GROUP grp1,
 p_rad3 RADIOBUTTON GROUP grp1.
SELECT-OPTIONS: s_matnr FOR mara-matnr,
 s_matkl FOR mara-matkl,
 s_mtart FOR mara-mtart.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN END OF SCREEN 1010.
START-OF-SELECTION.
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
MODULE status_0100 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
CALL SCREEN 1010 .
ENDMODULE. "status_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
 text
MODULE user_command_0100 INPUT.
CASE ok_code.
 WHEN 'EXIT'.
 LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
SCREEN 100 ****************
PROCESS BEFORE OUTPUT.
MODULE status_0100.
CALL SUBSCREEN sub_1010 INCLUDING sy-repid '1010'.
***** where sub_1010 is name of sub-screen area
PROCESS AFTER INPUT.
CALL SUBSCREEN sub_1010.
MODULE user_command_0100.
<<< REMOVED BY MODERATOR >>>
Harimanjesh AN
Edited by: Marcelo Ramos on Dec 17, 2008 7:54 PM

Triggering a workflow through a dialog program

I tried to trigger a workflow through a dialog program using FM. I also created BOR and workflow(SWDD). The dialog program basically deletes a sales order and then a workflow should trigger. I am not able to see the email. Am I missing anything here?
Pls find below the coding..'ZCSS_SO1' is the BO.
Data : g_objtype LIKE SWR_STRUCT-OBJECT_TYP,
G_OBJKEY LIKE SWR_STRUCT-OBJECT_KEY,
G_EVENT LIKE SWR_STRUCT-EVENT.
data begin of l_input_container occurs 0.
include structure swcont.
data end of l_input_container.
data: v_vbeln like vbak-vbeln.
g_objtype = 'ZCSS_SO1'.
g_event = 'DELETE'.
G_OBJKEY = 'SALESDOCUMENT'.
CALL FUNCTION 'SWC_ELEMENT_SET'
EXPORTING
element = 'ELEMENT'
field = 'VALUE'
tables
container = l_input_container.
CALL FUNCTION 'SWE_EVENT_CREATE_IN_UPD_TASK'
EXPORTING
objtype = g_objtype
objkey = G_OBJKEY
event = g_event
tables
event_container = l_input_container.
commit work.

Hi Chandri,
You can firstly check whether the code you have written below is triggering the BO event or not by switching on the trace using transaction SWELS , then running the transaction (dialog program mentioned below). After, switch off the trace and then view the trace from transaction SWEL.
Your BO and event should show up in the trace.
Regards,
Aditya
p.s. also for the mail, check what method u are using?

MULTIPLE SELECTION IN DIALOG PROGRAMMING

Hello exports,
I need to provide an interface to user where he can Put multiple selected invoice number at a time. (Like multiple selection in select option). It should be done in dialog programming.
plz suggest me .

Hai ,
You can use RANGES or can use TYPE RANGE OF while declaring.
For eg:
DATA:it_invoice    TYPE RANGE OF vbrk-vbeln,
.         wa_invoice LIKE   LINE     OF it_invoice.
Now u need a bit of coding,
wa_invoice -sign   = 'I'.
wa_invoice -option = 'BT'. i.e between
r_carrid_line-low    = your screen fieldname inwhich the lower limit was selected
r_carrid_line-high   = your screen fieldname inwhich the higher limit was selected.
APPEND wa_invoice TO it_invoice.
Now u can use this internal table IT_INVOICE in query using operator IN in the WHERE caluse as u use with select-options.
Or you can create a report program which has only a selection screen
You can EXPORT the object(select option name) to ur dialog program using IMPORT/EXPORT MEMORY ID .
But you need to declare the select options in ur dialog program with the same name and the structure
DATA: BEGIN OF rtab OCCURS {10|n},
             sign   TYPE c LENGTH 1,
             option TYPE c LENGTH 2,
             low    LIKE dobj,
             high   LIKE dobj,
      END OF rtab.
Thanks,
Neeraj

Dialog program and report

I have to create a dialog screen with a bunch of input fields that should be used by user to specify a search range . I know in reports it can be done with select options. How can it be done in dialog program. Also can I create a report and on executing the report can I call a dialog porgram screen
Thank you

You can embed a selection screen definition directly into your dynpro via a subscreen. Here is an example.
report zrich_0006 .
tables: mara.
* Custom Selection Screen 1010
selection-screen begin of screen 1010 as subscreen.
selection-screen begin of block b1 with frame title text-001.
parameters: p_rad1 radiobutton group grp1 default 'X',
            p_rad2 radiobutton group grp1,
            p_rad3 radiobutton group grp1.
select-options: s_matnr for mara-matnr,
                s_matkl for mara-matkl,
                s_mtart for mara-mtart.
selection-screen end of block b1.
selection-screen end of screen 1010.
start-of-selection.
call screen 100.
*&      Module STATUS_0100 OUTPUT
module status_0100 output.
* SET PF-STATUS 'xxxxxxxx'.
* SET TITLEBAR 'xxx'.
endmodule.
*&      Module USER_COMMAND_0100 INPUT
module user_command_0100 input.
endmodule.
* Screen screen 100 with a subscreen area called "subscreen_1010"
* Screen Flow Logic follows
*process before output.
* module status_0100.
* call subscreen subscreen_1010 including sy-repid '1010'.
*process after input.
* call subscreen subscreen_1010 .
* module user_command_0100.
Regards.
Rich Heilman

Slect-options in Dialog program

Hi,
How to bring Select-options parameter in dialog program ? i.e
I want to give a parameter like select-options in dialog program .
Thanks in Advance.
Regards
Ranjith

Hi
Treat Dialog pgm also as report---
u can declare as below in TOP include
SELECTION-SCREEN BEGIN OF SCREEN 030 AS WINDOW TITLE text-t08.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF BLOCK s1
                          WITH FRAME TITLE text-t08.
PARAMETERS:
ra_own          RADIOBUTTON GROUP rad3,
ra_all          RADIOBUTTON GROUP rad3.
SELECTION-SCREEN END OF BLOCK s1.
SELECTION-SCREEN END   OF SCREEN 030.

Beginning Dialog Programming

Similar Messages

Maybe you are looking for