Behaviors inconsistent when trimming - fix?

Hi There,
One thing that has been bugging me in Motion is the inconsistency between behaviors when you trim them.
As an example, if you apply a Throw behavior to an object, then trim it, the object stops where you trim it, then stays there after the play head has passed the out point.
But if you apply a Grow behavior then trim it, the object expands to it's full scale (doesn't stop where you trim it) and then snaps back to it's start position after the play head passes the out point.
Is there a global preference to set them all to behavior in the same way - either complete the behavior at the trim point or stop the behavior at the trim point?
Cheers

Nope, they work the way they work - if you want to make an animation change - spin, then stop, or grow, then stop, etc. - I recommend using keyframes. The basic motion behaviors are great for ongoing motion - position, rotation, scale, etc. - but for changes I always use keyframes.

Similar Messages

After the new 10.9.2 Maverick upgrade, my Photosmart C4480 3 in 1 printer can not scan and save the file to desktop or documents. You can only see the image in the print preview area. Does anyone know how to fix this or when a fix will be out?

After Aple support downloaded the new 10.9.2 Maverick upgrade on my MacBook Air, my Photosmart C4480 3 in 1 printer can not scan a document and load the file on to my desktop or document file. (You can see the doc image in the preview but it doesn't save it.) Does anyone know an Apple fix for this or when the fix will be out? After hours of trying reloading, and the usual fixes, etc. Apple told me to call HP, and HP told me they don't support Mac. It does not seem honorable of Apple to put out an upgrade and not tell people it will destroy their scanning ability, and that the only thing to do is to buy another printer/scanner.

Have you tried using Applications/Image Capture to scan.
Vuescan often works.
VueScan
VueScan FAQ

TS1702 No audio when trimming a clip. Any suggestions?

I have no audio when trimming a clip. Just got the new app imovie. Any one else having this problem? Any help would be great.

start here with the safe mode thing
Songs and Other Content Do Not Play Correctly

Volume inconsistent when playing music in iTunes

My volume is inconsistent when playing music. As in goes loud then soft without me changing volume.
I dont get this problem with games or movies.
Please help its very annoying.
Thanks
Hamish

I found the problem. I opened up app from application file instead of the dock and itunes worked fine.. I then deleted the short cut and reinstalled short cut and all works fine.

HT201317 I recently had my phone fixed and when they fixed it they wipe the phones memory but had everything saved but how do I retrieve my photos ?

I recently had my phone fixed and when they fixed it they wipe the phones memory but had everything saved but how do I retrieve my photos ?

Welcome to the Apple Community.
Navigate to Settings > General > Software Update and install any updates available.
Navigate to Settings > General > Reset > Erase all contents and settings on the device you want to restore.
When this completes and the Set-Up Assistant starts, choose "Restore from iCloud Backup" and enter your iCloud account and password. You will see the three most recent backups for each of the devices on which you enabled Backup. Choose which backup to restore from.

I have CS6. When I fix a JPEG or Raw photo in ARC and send it to CS6 to put finishing touches, the

I have CS6. When I fix a JPEG or Raw photo in ARC and send it to CS6 to put finishing touches, the photo never shows the changes that I have done.

What do you mean by "send it to CS6" ? Do you click on the Open button in ACR to open it in Photoshop?
What platform, Mac or Win? What exact version of Photoshop CS6, of ACR and of the OS?
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

When you FIX it?

Apple, when you fix "always on" link button on matrix? Hate it.

This is asked and answered many times every day.
The forum search bar is on the right side of this page as is the "More Like This" section. You will find your answer there.

When using 'Fix Red-Eye' or 'Retouch' the circle tool isn't showing

When using 'Fix Red-Eye' or 'Retouch' in iPhoto 11 (v9.4.3), the circle tool isn't showing any longer. Only the normal arrow cursor. It still works fine, I just can't see the size of the circle against the photo.
I've tried restarting iPhoto and the whole Mac, but no luck.
Any ideas? Thanks!

Does this help?
https://discussions.apple.com/thread/1284710

I am new to Macs and, although I like it, I still don't understand it's behavior. When would you need to provide the administrative password at boot time? Safe Mode?

Background...
I joined the Mac bandwagon about 2 months ago. I am still getting used to it, but like it so far. Last week, I activated a new Iphone on my Imac. I needed to key in my userid and password. 3 days later, my itunes account was hacked into. My itunes information was scrambled. My itunes email, home address, and password were changed. Also, they didn't use my credit card which was attached to my account to make any purchases (they deleted my card and put someone else's card on my account to buy $100 worth of gift cards). I didn't receive any emails from Apple that my password, or email were changed, but I did get 2 receipts from the Itunes Store identifiying the purchases. Apple support fixed everything, but couldn't offer any explanation on what happened, other than to say my account was "modified". I don't like coincidences.
I freely admit that I didn't do enough to protect my login credentials as I used the same userid and password on multiple sites (since corrected). I still don't know how my account was accessed. I started to wonder if there may have been a key logger installed on my Imac without my knowing it. I am pretty careful with installing software and have purchase about 15 applications, all either from the itunes store, or from other reputable sources. I have never made any in-app purchases.
I understand that to install a key logger you would need to supply the admin password, which brings me to my question....
About 4 weeks ago, my wife was using the Imac on facebook. While she was there, the Imac experienced a hard crash. We had to do push and hold the button on the back of Imac to get it to shut down and reboot. When it came up, it required the admin password, and dropped me into a mode where it wouldn't recognize the external disk drive which was attached via USB. I needed to restart the machine and everything appeared to be normal. I assumed that this was Apples version of "safe" mode, but now I am not so sure. Could a key logger have been installed during this event? Is this expected behavior after a hard reset?
I have McAfee for Mac installed and it hasn't detected any threats, but McAfee is pretty wishy-washy on it's ability to detect key loggers. I am thinking about Macscan or Little Snitch. I would do a reinstall of the OS, if I only knew how.
Any help?

your itunes accoutn have nothing to d with your computer
you can go to any computer with internet access in the world and
login into your itunes account if you have the appleID and password
the itunes account is placed on apples itunes servers

Data Protection Manager 2012 - Inconsistent when backing up Deduplicated File Server

Protected Server
Server 2012 File Server with Deduplication running on Data drive
DPM Server
Server 2012
Data Protection Manager 2012 Service Pack 1
We just recently upgraded our DPM server from DPM 2010 to DPM 2012 primarily because it is supposed to support Data Deduplication. Our primary File server that holds our home directories etc. is limited on space and was quickly running low so just after
we got DPM 2012 in place we optimized the drive on the file server which compressed the data about 50%. Unfortunately shortly after enabling deduplication the protected shares on the deduplicated volume are getting a Replica is Inconsistent error.
I continually get Replica is Inconsistent for the Server that has deduplication running on it. All of the other protected servers are being protected as they should be. I have run a consistency check multiple times probably about 10 times and it keeps going
back to Replica is inconsistent. The replica volume shows that it is using 3.5 TB and the Actual protect volume is 4TB in size and has about 2.5 TB of data on it with Deduplication enabled.
This is the details of the error
Affected area:   G:\
Occurred since: 1/12/2015 4:55:14 PM
Description:        The replica of Volume G:\ on E****.net is inconsistent with the protected data source. All protection activities for data source will fail until the replica is synchronized with
consistency check. You can recover data from existing recovery points, but new recovery points cannot be created until the replica is consistent.
For SharePoint farm, recovery points will continue getting created with the databases that are consistent. To backup inconsistent databases, run a consistency check on the farm. (ID 3106)
More information
Recommended action:
Synchronize with consistency check.
Run a synchronization job with consistency check...
Resolution:
To dismiss the alert, click below
Inactivate
Steps taken to resolve - I’ve spent some time doing some searches and haven’t found any solutions to what I am seeing. I have the data deduplication role installed on the DPM server which has been the solution for many people seeing similar issues. I have
also removed that role and the added it back. I have also removed the protected server and added it back to the protection group. It synchronizes and says consistent then after a few hours it goes back to inconsistent. When I go to recovery it shows that I
have recovery points and it appears that I can restore but because the data is inconstant I don’t feel I can trust the data in the recovery points. Both the protected server and the DPM servers’ updates are managed via a WSUS server on our network.
You may suggest I just un-optimize the drive on the protected server however after I have optimized the drive it takes a large amount more of space to un-optimize it (Anyone know why that is) anyways the drive isn’t large enough to support un-optimization.
If anyone has any suggestions I would appreciate any help. Thanks in advanced.

Ok I ran a consistency check and it completed successfully with the following message. However after a few minutes of it showing OK it now shows Replica is Inconsistent again.
Type: Consistency check
Status: Completed
Description: The job completed successfully with the following warning:
An unexpected error occurred while the job was running. (ID 104 Details: Cannot create a file when that file already exists (0x800700B7))
More information
End time: 2/3/2015 11:19:38 AM
Start time: 2/3/2015 10:34:35 AM
Time elapsed: 00:45:02
Data transferred: 220.74 MB
Cluster node -
Source details: G:\
Protection group members: 35
Details
Protection group: E*
Items scanned: 2017709
Items fixed: 653
There was a log for a failed synchronization job from yesterday here are the details of that.
Type: Synchronization
Status: Failed
Description: The replica of Volume G:\ on E*.net is not consistent with the protected data source. (ID 91)
More information
End time: 2/2/2015 10:04:01 PM
Start time: 2/2/2015 10:04:01 PM
Time elapsed: 00:00:00
Data transferred: 0 MB
Cluster node -
Source details: G:\
Protection group members: 35
Details
Protection group: E*

Relative/absolute keyframes when trimming

Hi,
I'm using some motion templates for titles in FCPX. Sometimes I just want to shorten the title in the timeline. By doing that the animation in the motion/titles template speed up. It does not seem to matter whether I use the trim or the blade tool.
Is there a way to keep absolute keyframes rather than relative one ?
Is there a setting in FCPX or Motion 5 to chose how the keyframes behave when the clip is being trimmed?
Thanks for you feedback.
/Max

To keep keyframes "absolute" for FCPX templates, you need to add a project marker, either Build In, Build Out (or both); or Project Loop End.
To add one of these markers: In Motion, click on the Layers List anywhere NOT on an object (deselect all layers). Move the playhead to the point in the project you want the animation to end and type 'M' to add the marker and command-option-m to pop up the dialog to set the type. (The "Optional" versions will provide a checkbox in FCPX that will allow the user to turn on or off the marker behavior.)
Build In will run the animation from the beginning to the marker and then "hold" if the clip has been lengthened or be truncated if shortened. (Build In markers are typically *past* the last keyframe)
Build Out will run the animation from the marker to the end of the project, "holding" at the beginning if the clip is lengthened and truncating (from the front end) if shortened. (Build Out is typically just before the first keyframe - or the beginning of the project)
You can use Build In and Build Out together, the space (or time) in between the two markers will be "expandable" or expendible (on resizing the clip).
Project Loop End will run the animation, truncating if shortened and looping if lengthened. (Project Loop should always be the best "looping point" in a project -- everything past this marker is **ignored** in FCPX, which is a rather important distinction. Project Loop will not have a specific effect while playing the project in Motion)

DNS inconsistency when switching from corporate to external network

I have a problem I've been tracking for months, and just can't seem to figure out.
I'm trying to access my corporate website, www.company.com (for instance). From inside of my corporate network, this resolves to an internal IP address, and works fine.
From outside of my corporate network on my 10.5 MacOS, I cannot reach the site in Safari, getting a "cannot reach the server" message. If I lookup the IP address using a command line "host" query, and put that address in Safari, I can reach it. If I add that IP address to the /etc/hosts file, I can also reach it. But Safari doesn't seem to want to resolve the address on its own.
This extends to Mail.app, which also cannot connect to my mailserver unless I add it to the /etc/hosts file.
A windows machine at home, on the same network as I'm on, can reach www.company.com without any of the DNS trickery.
Best I can tell, for some reason MacOS alone cannot resolve the IP addresses of this domain, and only this domain, except when inside of my company network (in which case it is an internal address).
One weird oddity, is that if I connect up to the Internet with my Sprint mobile broadband card, everything works again.
I've tried clearing the DNS cache with "dscacheutil -flushcache" to no avail.
So on my airport interface only, from my home network from which a Windows machine does just fine, my Mac cannot resolve the IP address automatically of my corporate external network (basic "www" site) which resolves differently when I'm on the corporate network. The "host" command consistently works though, and manual insertion of the IP address works.
I'm not using any kind of VPN.
Any ideas?

Also, and to clarify, I have changed DNS servers to a variety of public ones, as well as one I run, as well, to no avail. Same behavior.
I suspect that the Apple apps are still trying to resolve to my corporate (192.168.xx) address, despite the fact that I'm on an external network, and I can't for the life of me figure out why. (At least that is my guess.) Again, no VPN in place at all.

Snow Leopard Strange behavior, best stategy for fixing?

I have noticed recently a series of issues. It started when one of my computers starting getting Mobile Me sync errors. These seem to have gone away, but the computer that was having these errors now has several odd, but not, at this point critical problems.
Whenever I open iTunes I get the license agreement, I click Agree and the next time I get the same agreement. If I remove or move anything in my Dock, the next time I launch it is returned to it's previous state with Icons back where they were. Sometimes I try to move a file and get the admin Log In requirement. Other times, no problem. It doesn't seem like much, but it appears like there might be something brewing. I have Run Techtools 6.0.3 and disk utility and it comes up clean. I have run disk permission, I have upgraded SL to 10.6.8 v 1.1. I have reinstalled SL from the disc and upgraded. I have upgraded iTunes.
Still have the same problem. Is there any permissions fixes, such as changing a folder permission I can do without a clear wipe of my boot drive and a full install of all my apps and settings?
If I do have to upgrade, is there any ideas as to the most efficient way to get all the apps and settings restored.
Message was edited by: Mark Wheaton

Since not getting a response I used disk Utility several times to repair permissions, Used TechTools 6.0.3 and found nothing wrong, used Diskwarrior 4.3 found numerous .plist corrupted files. No real way to tell it to just move these to a temp folder and see what happens, but I think there are corrupt hidden root level files that are causing my issues, so unless I hear suggestions, I am moving to a fresh install on another drive. I am keeping this drive until I knwo everything works right and then erase and use it for file storage.
If any quicker fixes are out there I would love to hear them.

Error when importing Fixed Assets

Dear All,
Good day!
We are now importing the Fixed Assets into SAP Business One 9.0 PL 11 using the data import utility. I already made necessary setup. But when I import, a message prompts and tells "cannot import asset _____; a new asset's useful life and remaining life must be the same in the depreciation area". I ensure that the usefule life is match in the useful life of each asset group. Attached is the template I used and the format of column.
Thank you and Regards,
Ericka

Hi Ericka,
Please check below links.
Fixed Asset Mode
SAP 9.0 FIXED ASSETS
Import FA master data from Excel - SAP B1 9.0
Fixed Asset SAP Business One 9.0 Configuration
Hope this help
Regards::::
Atul Chakraborty

When you fix problem with move files

Adobe 'unexpectedly quit' when I try to move files in my mobile device. This started after Adobe updated.
I paid for app and I use every day. When the problem will be fix.

How long it takes them to fix it. over one week already.
Sent from Dominik

Behaviors inconsistent when trimming - fix?

Similar Messages

Maybe you are looking for