Benefits - Plan type for a particular infotype

In Benefits i want to see which plans are for a particular infotype
for ex savings, insurance etc.
like 1010,1020 1030 are for medical, 2010 2020 for insurance
3030 3040 for saving - where this info is stored, that this plan type is for this infotype
Edited by: Manu on Feb 8, 2011 5:24 PM

Hi,
For health plans, table is PA0167.
For insurance plans, table is PA0168.
For savings plans, table is PA0169.
For all of these, you can use SUBTY and PLTYP (should be the same).
You can also look at standard SAP report RPUBEN09 (transaction code HRBEN0009).
Hope this helps.
p.s. Please show some respect to people replying and maintain sanctity of the forum.
Donnie

Similar Messages

Techical field ( and Table ) for Promotion type for a particular Customer

Hi All,
Where can I find the promotion type for a particular Customer?
Thanks,
Sanjeet

Hi Suman,
I think you are talking about Transaction VB33.
Table - KONA (Rebate Agreements)
Field - KNUMA (Agreement (various conditions grouped together))
Structure - RV13A (Input/Output Fields for Price Element Maintenance)
Field - KNUMA_PI (Promotion)
And if you want based on particular customer..
Table - KOTE003 (Customer)
Field - KNUMA (Agreement (various conditions grouped together))
Table - KOTE004 (Customer Hierarchy)
Field - KNUMA (Agreement (various conditions grouped together))
Best Regards,
Sayak

How to set a default Billing type for a particular Delivery type

Dear All,
How to set a default billing type for a particular delivery type.
My requirement is, we are creating delivery for a Stock Transport Order. Delivery type is NL and the Purchase order type is UB.
When we are creating Billing, it should take Billing type "ZSTO" by default, which is the customised Billing type.
Where we have to do this setting?
In case of normal sales order, this control will be available in the Sales order document types.
In case STO, how to set a default billing type for a delivery type (NL).
Regards,
Rajesh

There is a customization available here no default or hard coded
Normally in a sales doc type we mention which billing type system has to pick
If the billing happens from a PO which billing type system will take depends on the controls set in the areas mentioned below
Go to your delivery type OVLK (say your delivery type is NL)
In that there is a field called default order qty in the order reference tab (say if you maintained DL there)
This DL is called PSEUDO order type
Then in VOV8 for DL based on the billing types mentioned ,system will take the billing doc
For delivery related billing say if you mention say ZF8 in the details of DL in VOV8(provided you have created ZF8)
Then while you bill the delivery doc of NL system will take ZF8
For intercompany delivery you can create ZIV billing type also Pure customization
PO is linked to delivery type ( MM spro settings)--Del type linked to order (pseudo) type---in order type (pseudo) we mention the billing types. Here the flow is bit different that pure SD flow
Though the invoice is crated by manually putting customized Biiling Type and A/Cing doc also generated, but in the VF04 still system shows the same deliveries pending with Billing Type (F2).
This manual is not reqd if the said assignments are done properly
Hope it can assist you.
Thanks & Regards
JP
Edited by: J Prakash on Jun 23, 2010 4:05 PM

How to find condition type for a particular material document no.

hiiiiii
How to find condition type for a particular material document no.

Hi
Condition types are maintained at PO level
Take the EKKO-KNUMV and pass to
KONV-KNUMV field and take the different condition types values from KONV
Take the Material Document No (MBLNR) and pass to MSEG table and take the EBELN field and from EKKO table take EKKO-KNUMV field and pass to KONV
see the table T685 for different condition types.
<b>Reward points for useful Answers</b>
Regards
Anji

Workflow - Create a new buisness object type for an new infotype.

Hi all,
I have an issue with creating a new buisness object type, which is related to a
supertype, for an new infotype.
I am new to workflow and business object. I don't have much knowledge in these area. I need to resolve this problem ASAP.
Could someone please provide me a step-by-step guide on how to create a new business object type, which is related to an existing supertype, for an newly created infotype?
If would be very much appreciated if someone could assist me in resolving this issue.
Thank You.

Business objects are maintained in SWO1 creating a subtype is done with the button: Create subtype (F9)
If you don't have knowledge of workflow or abap objects, it is perhaps better to tell your employer that and find someone who has.
If your problem is simply only creating a subtype then go with the instructions I already gave you, if however more things need to be done, like extending the subtype with (virtual)attributes, methods, events, delegating the subtype and implementing the methods in newly created tasks and subsequently workflows I really advise to find someone who can do this, or attend a SAP course on this subject.
Kind regards, Rob Dielemans

Allowed Movement types for a Particular plant..

Hi All,
Please let me know is there any option available in SAP to configure the allowable movement types for particular plant ?
Most urgent
Thanks
Chandru

Did you ever find a way to do this? We have a similar requirement that we want to allow some of our users to use movement type 501 but not all. We would also like to restrict another movement to only be allowed in certain plants within our company. Our basis person is saying that this can't be done but I was certain that it could.

To check authorisation for a particular infotype

Hi Folks,
           Is there any standard report or a way to find out whether a user got access to a particular infotype or not...
                                      Thanks in advance,
                                       Shyam.

Hi Sheam,
The report ( RPUAUD00 ) is used to display all changes that you made using infotype change documents,
or ( PC00_M16_UAUD ) transaction, and you can customize it by (V_T585A, V_T585B and V_T585C).
I hope it helps you.
Benamor.

Defaulting document types for a particular company codes.

Dear All,
Is there a way to default certain document types to particular company codes, so that when ever if we enter that particular company code then automatically the default document types has to come. I tried to check for configurations but could not. Please let me know how to achieve this scenario.
Regards
Srikanth

Hi,
No, does not seem possible to me without development...
Regards,
Eli

How to capture the process type for a particular application

In my application CRMD_BUS2000120 there are 3 process types namely incidents, zcomplaints and zrepair order. But all the 3 display the same description as New: Incidents . Since this is attached with the application name. How can i change the description according to the process type i select. If I select incidents the description should be Incident , if i select zcomplaints it should be zcomplaints. Can anyone guide me how to do this.
Thanks in Advance,
Anu

Hi Fred,
If you open any activities or opportunities, you can see the description if you select new button and click on the process type. It will be display Activities and below that New: Activity. Instead of always displaying the same description I want to override the description according to the process type. For me the application is not activity but Incident. Hope I am clear with the question.
Thanks,
Anu

How do I check Business object set type for a particular field

Hi,
I have a requirement to make the DESCRIPTION field editable for Internal Goods and Service .I have done it for Limit shopping cart with following details in the below configuration
Goto SPRO->SAP Supplier Relation ship Management
                         ->SRM Server
                             ->Coss applications and settings -> Extensions and Field Control
                                      ->Configure field control->configure control for fields substructure (in tabs field)
Bus. Object Set Type 32
Structure Field Name   DESCRIPTION
Bus. Object Type        BUS2121
Set Level                    ITEM
field editable               checked
But for Internal Goods and Service which Bus. Object Set Type should i use to achive this
Thanks
Vivek

Hello Vivek,
Execute transaction SM30 and display the Table/View /SAPSRM/V_ACTSET. Here you will find set type of all the fields.
Regards,
Arun Singh

What is the purpose of Output types for a particular FORM

Hi,
All
can any body explain me what an output type is for a form, and also why we use it and where we use it

hi,
Output types are represent how you want to output information. In SAP Script context it links the print program with SAP script. Output types are part of Output determination procedure which is linked to the application (e.g. Purchsing). Output types are also linked to Access sequence, which allows you to create condition records so that output types can be processed automatically.
check this link
http://help.sap.com/saphelp_nw04/helpdata/en/c8/19884743b111d1896f0000e8322d00/frameset.htm

How to add a specific order type into any particular report

Hi All,
How to add a specific document type(order type) into any particular report in order to review OTD performance.
I need to add one specific order type to existing reports which will help to check the performance of the delivery type for that particular order type to the users.
Thanks,
Raj

Hi Rajesh,
thanks for the reply when i tried as the way you said.. but the system is asking more details like varient. so if you can clearly specify the process for order type (VOV8-- table TVAK) so it will helpful for me.
Thanks
Raj

How to set different font for a particular row in jtables?

How to set different font size and font type for a particular row in jtable?

More than enough sample code here:
[http://java.sun.com/docs/books/tutorial/uiswing/components/table.html]
db

Different exchange rate type for PO

Hi,
I have a requirement, where I need to take a different exchange rate type for one particular PO document type.
I have already maintained exchange rate type Z in Tcurr table.
I should enable system to pick this exchange rate for PO wich are created from a PO document type
Same exchange rate should be picked for GR and IR as well.
If I overwrite the PO exchange rate in PO header, GR and IR are picked default M exchange rate type.
If I maintain Z exchange rate for doc type WE and RE, the same would taken for all POs GR/IR.
I should make it available only for a PO document type and relevent GR/IRs.
Can you please advise how we can achieve this.
Your help in this regard is much appreciated.
Thanks,

Any Advise.

How to change data type for a field?

Hi Experts,
I have one std screen having one field having numeric type. So it will accept only numeric value. Remember I am using standard transaction.
Now my user wants to enter the special character like + or - in that field(having data type numeric).
How i can change the data type for the particular field so that it will also accept + or -?
Plz reply me as earliest as possible.
Thanks in advance.

Hi salil ,
u have to change / create Domain of that Data Element.
but u have to check the Implications. i have done the same thing , but that one is Customer defined one , i got nearly 20 short dumps while doing the TP.
regards
Prabhu

Benefits - Plan type for a particular infotype

Similar Messages

Maybe you are looking for