How do I check Business object set type for a particular field
Hi,
I have a requirement to make the DESCRIPTION field editable for Internal Goods and Service .I have done it for Limit shopping cart with following details in the below configuration
Goto SPRO->SAP Supplier Relation ship Management
->SRM Server
->Coss applications and settings -> Extensions and Field Control
->Configure field control->configure control for fields substructure (in tabs field)
Bus. Object Set Type 32
Structure Field Name DESCRIPTION
Bus. Object Type BUS2121
Set Level ITEM
field editable checked
But for Internal Goods and Service which Bus. Object Set Type should i use to achive this
Thanks
Vivek
Hello Vivek,
Execute transaction SM30 and display the Table/View /SAPSRM/V_ACTSET. Here you will find set type of all the fields.
Regards,
Arun Singh
Similar Messages
-
EEWB : how to determine the business object and the extension type ?
Hi,
I ask myself how to determine the business object and the extension type to use to add new fields in a new tab of a specific transaction ? what means each business object, does that correspond to a specific transaction ?
I need to add a new tab in the BaMI business activity in transaction CRMD_ORDER just after the tab 'Actions' at header level.
Could you help me please to determine which business object and extension type I have to select during creation of the project and which business object category I have to select during creation of the extension (wizard) ?
Thanks for your help,
MarieMarie,
In order to determine what type of transaction you are extending, you will need to look at the customizing for the transaction.
In the IMG:
Goto:
Customer Relationship Management->Transactions->Basic Settings->Define Transaction Types.
You will then choose the transaction defined that you want to extend. If you display the details of the transaction you will find an attribute called:
"Leading Transaction Category". This tells you the general context in which the transaction is used. The other item to view is the assignment of business transaction categories found in the maintenance screen.
This information general corresponds to one of the options that the EEWB will give you on the transaction type.
As far as extensions go, my recommendation is the following:
- Use CUSTOMER_H Customer Header Extensions for any new fields at the header level.
- Use CUSTOMER_I Customer Item Extensions for any new fields at the item level.
Unless you have a specific requirement to extend a segment of the transaction, I recommend placing all new fields in these segments. The CUSTOMER_H & CUSTOMER_I segments are considered "standard" segments, that are already built into all the necessary API structures.
Let me know if you have any further questions.
Good luck,
Stephen -
How to increase the number of data Business Object can pull for a report?
Hi,
I would like to ask around how to increase the number of data Business Object can pull for a report. I have a report which pulls data depending on the date range (ex. From 01/01/2007 - 01/10/2007). But, when the data that is pulled exceeds 5000, the report fails. Is there anyway to increase the number of data that BO can pull?
ThanksBobby,
to my knowledge we can't change that. Let me explain this, we have setting in the source system for DS default Data Transfer. there we will assign the processes. if you want to assign 4 you need to change the setting in the source system. For flat files we can change in BW System. We can maintain the setting in the Infopackage level(wht we are assigned in the Source System), but we can't change the process.
in order to check the setting in source system SBIW--> General Settings --> Control Parameters for Data Transfer.
we need to change here, this will effect to all the Data Sources. Before making changes check with your basis.
All the best.
Regards,
Nagesh Ganisetti. -
How to create a Business Object
Hi All,
How to create a Business Object.
If any material is avaliable Please mail me to [email protected]
Thank you,
Ramu N.Hi,
Check this SAP help link,
http://help.sap.com/saphelp_nw2004s/helpdata/en/4f/5668735cf211d194a30000e82dec10/frameset.htm
Thanks and Regards,
Bharat Kumar Reddy.V -
How to set a default Billing type for a particular Delivery type
Dear All,
How to set a default billing type for a particular delivery type.
My requirement is, we are creating delivery for a Stock Transport Order. Delivery type is NL and the Purchase order type is UB.
When we are creating Billing, it should take Billing type "ZSTO" by default, which is the customised Billing type.
Where we have to do this setting?
In case of normal sales order, this control will be available in the Sales order document types.
In case STO, how to set a default billing type for a delivery type (NL).
Regards,
RajeshThere is a customization available here no default or hard coded
Normally in a sales doc type we mention which billing type system has to pick
If the billing happens from a PO which billing type system will take depends on the controls set in the areas mentioned below
Go to your delivery type OVLK (say your delivery type is NL)
In that there is a field called default order qty in the order reference tab (say if you maintained DL there)
This DL is called PSEUDO order type
Then in VOV8 for DL based on the billing types mentioned ,system will take the billing doc
For delivery related billing say if you mention say ZF8 in the details of DL in VOV8(provided you have created ZF8)
Then while you bill the delivery doc of NL system will take ZF8
For intercompany delivery you can create ZIV billing type also Pure customization
PO is linked to delivery type ( MM spro settings)--Del type linked to order (pseudo) type---in order type (pseudo) we mention the billing types. Here the flow is bit different that pure SD flow
Though the invoice is crated by manually putting customized Biiling Type and A/Cing doc also generated, but in the VF04 still system shows the same deliveries pending with Billing Type (F2).
This manual is not reqd if the said assignments are done properly
Hope it can assist you.
Thanks & Regards
JP
Edited by: J Prakash on Jun 23, 2010 4:05 PM -
Sample for Business Objects Web Services for Admin Tasks
Hi,
Anyone has any idea that where can I get a sample using Business Objects Web Services for Admin Tasks like:
- How To Set Security Rights
- How To Manage Categories
- How To Manage User Accounts
- How To Manage User Groups
Thanks,
HarshadSamples are available at:
https://www.sdn.sap.com/irj/sdn/businessobjects?rid=/webcontent/uuid/e02e0a54-6471-2b10-c99c-d66e07fab102&startindex=21
Check BOSAP notes and other samples page for more info. -
Check Code (PK) When type in to text field,Exist or not
Hi,
i want to create a Language Master.I have take two fields LAN_CODE and LAN_NAME in LANG_MASTER Table. Here LAN_CODE is my Primary Key.
Now problem is when i type New LAN_CODE into Text Field Item and when i press Submit then it show me Error LAN_CODE Already Exist .
I need when i Type New LAN_CODE in Language Code TEXT FIELD then it should be check LAN_CODE Already Exist or not. if LAN_CODE Already Exist .then Cursor should not point (go) to Next Item.
My LAN_CODE Formate is
HIE-------Hindi
ENG------English
PAN------PANJABI
How can i check code when i type new code in to text field.Code Exist or Not.
How can i do this.
Thanks
Vedant
Edited by: Vedant on Jun 2, 2011 11:39 PMHi Paul ,
Thanks to reply me.
I have created a form with report and
i did apply that code ,It's working BUt Now Problem is when i press TAB then it's show me error Value Already Exit But Here it's change into APPLY_CHANGE Mode .
How can i prevent to page not in Apply Change Mode.
i want when TAB Press and check for Duplicate VAlue it should be in Create New Language Mode.
How can i do this.
Thanks
Vedant
Edited by: Vedant on Jun 5, 2011 11:19 PM -
Can we check the Objects modifiable " option for standard objects
Dear Friends
In IR , we have imported SRM SERVER->SRM SERVER5.5
Then we have checked the option<u><b> "Objects are modifiable"</b></u> then we imported the IDOC from R/3 system under SRM SERVER 5.5 swcv.
Then created the mapping.It is working fime.
how ever i am not sure whether it is right process.Can we check the "Objects are modifiable" for standard compoents delivered by SAP????
Regards
chandraHi Jai,
<i> >>>Can we check the "Objects are modifiable" for standard compoents delivered by SAP????
No. As best practise you are not supposed to do so.</i>
In order to implement any changes in the mapping we can do it rite.
Because recently i have applied one SAP note to my SRM swcv and one of the MM object was changed according to the requirements.
Thanks,
Prasanthi. -
Any business Object and Events for CJ01?
hello friends,
can any one of u tell me the Business Object and Event for the transaction CJ01?
Could you please let me know is it business object (BUS2054) is right one. If it is right one please let me know the Event for CJ01?
Thanks,
SridharHi Sridhar.
You want to know if there is triggered an event when you create a project.
Try the following:
Activate event trace with SWELS.
Create a project with CJ01.
Check transaction SWEL to display trace event.
Regards
JCD -
How to find condition type for a particular material document no.
hiiiiii
How to find condition type for a particular material document no.Hi
Condition types are maintained at PO level
Take the EKKO-KNUMV and pass to
KONV-KNUMV field and take the different condition types values from KONV
Take the Material Document No (MBLNR) and pass to MSEG table and take the EBELN field and from EKKO table take EKKO-KNUMV field and pass to KONV
see the table T685 for different condition types.
<b>Reward points for useful Answers</b>
Regards
Anji -
Hello,
We have added some Z set types for our CRM Products and have created two Z tables for this. But even though we update these tables, we are not able to get the values for product on the screen.
Can someone tell me what all tables should be updated when we have cutsom Set Types in use?
Rgds
PriyankaHi Priyanka,
I Guess you want the Values in the Ztable as F4 help values for the Z attributes in Z set types of the product.
To do the same plz follow the steps mentioned below:
1) Identify the field(Attribute in Set type) for which you want the F4 help.
2) Go to SE11. Select Data Type and enter the name of the Attribute value.
3) Press Change
4) Doble click on the Domain to go to the domain element associated to it.
5) In domain element screen, go to Value Range Tab.
6) In Value Range Tab, you have a Value Table field, Enter the ZTable from which you want the value to be populated in F4.
7) Save and Activate the Domain element.
Test the scenario.
Best Regards,
Pratik Patel
<b>Reward with Points!</b> -
HT5622 how do I go back and set up for emails to come to my ipod
How do I go back and set up for emails to come to my ipod?
Hello, if I'm understanding you, tap on the mail icon, enter the account address and password. Good luck, Cheers.
-
My husband was trying to reload and delete printers and he some how reset many settings on his mac book pro - how does he go back and set everything for earlier today
As Terence said you're experiencing a kernel panic. Boot into your System install disk and launch Disk Utility from the Utilities menu in the first window after the language selection window. Repair the disk. If DU finds problems and runs repairs do it a second time and then reboot.
-
How to provide hyperlink for a particular field in ALV
Hi,
How to provide hyperlink for a particular field in alv report.
Regards,
Ramu.Yes you can do that. using the fieldcatalog there is an option for that. give HOT_SPOT = 'X'. for the column you want.
wa_field-hotspot = 'X'.
REPORT ztest_alv.
TYPE-POOLS:slis.
DATA:it_fieldcat TYPE slis_t_fieldcat_alv,
wa_field LIKE LINE OF it_fieldcat.
DATA: BEGIN OF it_likp OCCURS 0,
vbeln TYPE likp-vbeln,
END OF it_likp.
DATA: layout TYPE slis_layout_alv.
wa_field-fieldname = 'VBELN'.
wa_field-tabname = 'IT_LIKP'.
wa_field-hotspot = 'X'.
wa_field-outputlen = 10.
wa_field-no_zero = 'X'.
wa_field-seltext_l = 'Sales'.
APPEND wa_field TO it_fieldcat.
SELECT vbeln FROM likp
UP TO 10 ROWS
INTO TABLE it_likp.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
is_layout = layout
i_callback_user_command = 'USER_COMMAND'
it_fieldcat = it_fieldcat
TABLES
t_outtab = it_likp
EXCEPTIONS
program_error = 1.
*& Form user_Command
* text
* -->UCOMM text
* -->SELFIELD text
FORM user_command USING ucomm TYPE sy-ucomm
selfield TYPE slis_selfield.
CASE ucomm.
WHEN '&IC1'.
SET PARAMETER ID 'VL' FIELD selfield-value.
CALL TRANSACTION 'VL02N' AND SKIP FIRST SCREEN.
ENDCASE.
ENDFORM. "user_Command -
Error: property is not set correctly for User Defined Fields.
Hi Gurus,
I am trying to define a new field Department of type Lookup. For this i have created a new field in user defined fields. But when i click on create user in web console it give me "property is not set correctly for User Defined Fields."
I created a lookup field for department , but looks like i have to some kind of mapping. How can it be done?
Thanks,
satHi Kevin,
I couldnt get it done. This is what I had done so far.
Created Lookup.Users.Dept ( with code code=23 & decode=treasury)
Added two field in xlwebadmin.properties & xlwebadmin_en.properties
lookupfield.header.users.deptcode=Department code
lookupfield.header.users.deptname=Department name
In my lookfield properties in
column caption=Department code,Department name
Column query= Not sure what to give? here
Thanks,
sat
Maybe you are looking for
-
my itnues for pc is not working it shows that iTunes has stop working,I have downloaded Itnues many times but still it is not working, please help me
-
All photos were brought into the web page by using the iWeb "Media" button and navigating to the iPhoto library. Then, in iWeb, I go to *Inspector > Photos* Under "Photo Sharing," I set the Photo Download Size to "Original (Full Quality)." Then, I te
-
Problem to show "applet" in Hand Held PC(Palmtop PC)?
Hi, I'm trying to open the Applet(i.e Calendar Applet) in Palmtop PC(Hand held PC). It is having Windows CE 5.0 version(which is the latest version in Market). It showing only the rectangle with "<b>RED Cross mark</b>". I don't have any menus in this
-
How to open link in new tab using Spry?
Does anyone know how to open menu web links in a new tab (instead of opening a new window - IE7) using the Spry horizontal dropdown menu? I tried putting "_tab" in the target field but it doesn't seem to work. Thanks!
-
Hello, I want a confirmation's user when he closes the browser with the X icon. For this i use the code : var needToConfirm = true; window.onbeforeunload = confirmExit; function confirmExit() if ( needToConfir